Multidimensional simulation of ethanol HCCI engines

SAE Technical Papers

Volumn , Issue , 2009, Pages

  Viggiano, Annarita ^a   Magi, Vinicio ^a  

^a UNIVERSITY OF BASILICATA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

ETHANOL; INTERNAL COMBUSTION ENGINES; SENSITIVITY ANALYSIS;

CHEMICAL SOURCES; DETAILED KINETIC MECHANISMS; ENGINE EFFICIENCY; ETHANOL COMBUSTION; INITIAL AND BOUNDARY CONDITIONS; MULTIDIMENSIONAL SIMULATION; POLLUTANT EMISSION; PREDICTIVE CAPABILITIES;

COMBUSTION;

EID: 85072489920     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2009-24-0031     Document Type: Conference Paper

References (38)

1. Agarwal, A.K., (2007). Biofuels (Alcohols and Biodiesel) Applications as Fuels for Internal Combustion Engines. Progress in Energy and Combustion Science, 33: 233-71.
2. Stanglmaier, R.H., Roberts, C.E., Homogeneous Charge Compression Ignition (HCCI): Benefits, Compromises and Future Applications. SAE Paper 1999-01-36982, 1999.
3. Nagakome, K., Shimazaki, S., Niimura, K., Kobayashi, S., Combustion and Emissions Characteristics of Premixed Lean Diesel Combustion Engine. SAE Paper 970898, 1997.
4. Suzuki, H., Koike, N., Ishii, H., Odaka, M., Exhaust Purification of Diesel Engines by Homogeneous Charge with Compression Ignition. Part 1: Experimental Investigation of Combustion and Exhaust Emission Behaviour Under Pre-Mixed Homogeneous Charge Compression Ignition Method. SAE Paper 970313, 1997.
5. Hashizume, T., Miyamoto, T., Akagawa, H., Tsujimura, K., Combustion and Emission Characteristics of Multiple Stage Diesel Combustion. SAE Paper 980505, 1998.
6. Yokota, H., Kudo, Y., Nakajima, H., Kakegawa, T., Suzuki, T., A New Concept for Low Emission Diesel Combustion. SAE Paper 970891, 1997.
7. Suzuki, H., Koike, N., Odaka, M., Combustion Control Method of Homogeneous Charge Diesel Engines. SAE Paper 980509, 1998.
8. Borman, G.L., Ragland, K.W., Combustion Engineering. McGraw-Hill, Inc., New York, 1998.
9. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, Inc., New York, 1988.
10. Trigui, N., Griaznov, V., Affes, H., Smith, D., (1999). CFD Based Shape Optimization of IC Engine. Oil & Gas Science and Technology-Revue de l'Institut Francais du Pétrol, 54 (2): 297-307.
11. Amsden, A., KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries, Los Alamos Laboratory Report No. LA-12503-MS, 1993.
12. Magi, V., REC-87: A New 3-D Code for Flows, Spray and Combustion in Reciprocating and Rotary Engines, Mechanical and Aerospace Engineering Report No. 1793, Princeton University, 1987.
13. Anders, J.W., Venugopal, R., Magi, V., Abraham, J., (2008). A Study of Flame-Vortex Interactions in the Presence of Residual Gases. Combustion Science and Technology, 180 (7): 1395-1420.
14. Anders, J.W., Magi, V., Abraham, J., (2008). A Computational Investigation of the Interaction of Pulses in Two-Pulse Jets. Numerical Heat Transfer, Part A: Applications, 54 (11): 999-1021.
15. Wadhwa, A.R., Magi, V., Abraham, J., (2007). Transient deformation and drag of decelerating drops in axisymmetric flows. Physics of Fluids, 19 (11): 113301.
16. Owston, R., Magi, V., Abraham, J., (2007). A Numerical Study of Thermal and Chemical Effects in Interactions of n-Heptane Flames with a Single Surface. Combustion and Flame, 148: 127-47.
17. Viggiano, A., Magi, V., (2004). A 2-D Investigation of the n-Heptane Autoignition by means of Direct Numerical Simulation. Combustion and Flame, 137: 432-43.
18. Magi, V., REC-2000: A Multidimensional Code for Engines. Engine Research Laboratory Report, School of Mechanical Engineering, Purdue University, 2000.
19. Xingcai, L., Yuchun, H., Linlin, Z., Zhen, H., (2006). Experimental Study on the Auto-Ignition and Combustion Characteristics in the Homogeneous Charge Compression Ignition (HCCI) Combustion Operation with Ethanol/n-Heptane Blend Fuels by Port Injection. Fuel, 85: 2622-31.
20. Christensen, M., Johansson, B., Einewall, P., Homogeneous Charge Compression Ignition (HCCI) Using Isooctane, Ethanol and Natural Gas-A Comparison with Spark Ignition Operation. SAE Paper 972874, 1997.
21. Aceves, S.M., Flowers, D.L., Espinosa-Loza, F., Martinez-Frias, J., Dibble, R.W., Christensen, M., Johansson, B., Hessel, R.P., Piston-Liner Crevice Geometry Effect on HCCI Combustion By Multi-Zone Analysis. SAE Paper 2002-01-2869, 2002.
22. Aceves, S.M., Flowers, D.L., Espinosa-Loza, F., Babajimopoulos, A., Assanis, D.N., Analysis of Premixed Charge Compression Ignition Combustion With a Sequential Fluid Mechanics-Multizone Chemical Kinetics Model. SAE Paper 2005-01-0115, 2005.
23. Komninos, N.P., Hountalas, D.T., Rakopoulos, C.D., (2007). A Parametric Investigation of Hydrogen HCCI Combustion Using a Multi-Zone Model Approach. Energy conversion and management, 48 (11): 2934-41.
24. Behave, A., Kraft, M., Montorsi, L., Mauss F., (2006). Sources of CO Emissions in an HCCI Engine: A Numerical Analysis. Combustion and Flame, 144: 634-37.
25. Flowers, D.L., Aceves, S.M., Martinez-Frias, J., Dibble, R.W., (2002). Prediction of carbon monoxide and hydrocarbon emissions in iso-octane HCCI engine combustion using multizone simulations. Proceedings of the Combustion Institute, 29: 687-94.
26. Bromberg, L., Cohn, D.R., Heywood, J.B., Calculations of Knock Suppression in Highly Turbocharged Gasoline/Ethanol Engines Using Direct Ethanol Injection, MIT Laboratory for Energy and the Environment report LFEE 2006-001, 2005.
27. Hilbert, R., Tap, F., El-Rabii, H., Thévenin, D., (2004). Impact of detailed chemistry and transport models on turbulent combustion simulations. Progress in Energy and Combustion Science, 30: 61-117.
28. Saxena, P., Williams, F.A., (2007). Numerical and experimental studies of ethanol flames. Proceedings of the Combustion Institute, 31: 1149-56.
29. Launder, B.E., Spalding, D.B., (1974). The Numerical Computations of Turbulent Flows. Computer Methods in Applied Mechanics and Engineering, 3: 269-89.
30. Kong, S.-C., Reitz, R.D., (2002). Numerical Study of Premixed HCCI Engine Combustion and its Sensitivity to Computational Mesh and Model Uncertainties. Combustion Theory Modelling, 7: 417-33.
31. Magnussen, B.F., Hjertager, B.H., On the Numerical Modeling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion. Sixteenth Symposium (International) on Combustion, The Combustion Institute, pp. 719-729, 1979.
32. Einewall, P., Johansson, B., Combustion Chambers for Supercharged Natural Gas Engines. SAE Paper 970221, 1997.
33. Hayder, M.E., Varma, A.K., Bracco, F.V., (1985). A Limit to TDC Turbulence Intensity in Internal Combustion Engines. AIAA Journal of Propulsion and Power, 1: 300-08.
34. Stone, H.L., (1968). Iterative Solution of Implicit Approximations of Multidimensional Partial Differential Equations, SIAM Journal on Numerical Analysis, 5 (3): 530-58.
35. Brown, P.N., Byrne, G.D., Hindmarsh, A.C., (1989). VODE: A Variable Coefficient ODE Solver. SIAM Journal on Scientific and Statistical Computing, 10: 1038-51.
36. Magi, V., Iyer, V., Abraham, J., (2001). The k-ε Model and Computed Spreading Rates in Round and Plane Jets. Numerical Heat Transfer Journal, 40: 317-34.
37. Iyer, V., Abraham, J., Magi V., (2002). Exploring Injected Droplet Size Effects on Steady Liquid Penetration in a Diesel Spray with a Two-Fluid Model. International Journal of Heat and Mass Transfer, 45 (3): 519-31.
38. Anders, J.W., Magi, V., Abraham, J., Turbulent Near-Field Mixing in Pulsed Jets-RANS and LES Results Compared. Proceedings of the 2006 Technical Meeting of the Central States Section of the Combustion Institute, 2006.