Auto-ignition quality of practical fuels and implications for fuel requirements of future SI and HCCI engines

SAE Technical Papers

Volumn , Issue , 2005, Pages

  Kalghatgi, Gautam T ^a  

^a SHELL GLOBAL SOLUTIONS INTERNATIONAL B V   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FUELS; IGNITION; INTERNAL COMBUSTION ENGINES; SPECIFICATIONS;

CATALYST TECHNOLOGIES; COMPRESSION TEMPERATURE; FUEL COMPOSITIONS; FUEL REQUIREMENTS; HIGHER COMPRESSION RATIOS; HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINES; MONOTONIC DECREASE; PRESSURE AND TEMPERATURE;

DIRECT INJECTION;

EID: 85072474009     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2005-01-0239     Document Type: Conference Paper

References (68)

1. "EU Strategy on CO2 emissions from passenger cars" www.europa.eu.int/comm/environment
2. "ACEA's CO2 commitment" www.acea.be Publications
3. st Hawksley Memorial Lecture, Institution of Automotive Engineers, 1 Birdcage Walk, London, December 2003.
4. "Diesel passenger car and light commercial vehicles market in Western Europe", Ricardo, www.ricardo.com, 2003
5. Zhao, F., Harrington, D.L., and Lai, M., "Automotive gasoline direct injection engines" ISBN 0-7680-0882-4, SAE International, 2002.
6. Leduc, P., Dubar, B., Ranini, A., and Monnier, G., "Downsizing of gasoline engine: an efficient way to reduce CO2 emissions" Oil and Gas Science and Technology, Rev. IFP, vol. 58, No. 1, pp 115-127, 2003. (Pubitemid 36339626)
7. Heywood, J.B., "Internal combustion engine fundamentals" Ch. 9., McGraw Hill Book Co., 1988
8. Zhao, F., "Homogeneous Charge Compression Ignition (HCCI) Engines: Key Research and Development Issues" ISBN 0-7680-1123-X, SAE International, 2003.
9. Westbrook, C.K., "Chemical kinetics of hydrocarbon ignition in practical combustion systems" Proceedings of the Combustion Institute, vol. 28, pp 1563-1577, 2000.
10. Dec, J.E., "A conceptual model of DI diesel combustion based on laser sheet imaging" SAE 970873, 1997.
11. Owen, K., and Coley, T., "Automotive fuels reference book" SAE, Warrendale PA, 1995.
12. Bradley, D., and Morley, C., "Autoignition in spark-ignition engines" Ch.7 in-"Low-temperature combustion and autoignition" Editor, Pilling M.J., vol. 35 of "Comprehensive chemical kinetics" edited by Compton R.G., and Hancock G., Elsevier Science B.V., 1997.
13. Westbrook, C.K., and Dryer, F.L., "Chemical kinetic modelling of hydrocarbon combustion" Prog. Energy Combust. Sci. vol. 10, p 1, 1984.
14. Warnatz, J., "Chemistry of high temperature combustion of alkanes up to octane" Twentieth Symposium (International) on Combustion, The Combustion Institute, Pittsburg, p. 845, 1984.
15. Simmie, J.M., "Detailed chemical kinetic models for the combustion of hydrocarbon fuels" Prog. Energy Combust. Sci., vol. 29, p 599, 2003.
16. Griffiths, J.F., "Reduced kinetic models and their application to practical combustion systems" Prog. Energy and Combust. Sci., vol. 21, p 25, 1995.
17. Leppard, W.R., "The autoignition chemistries of primary reference fuels, olefin/paraffin binary mixtures and non-linear octane blending" SAE 922325, 1992.
18. Livengood, J.C., and Wu, P.C., "Correlation of autoignition phenomenon in internal combustion engines and rapid compression machines" Proceedings of Fifth International Symposium on Combustion, p 347, Reinhold, 1955.
19. Bradley, D., Morley, C., Walmsley, H., "Relevance of Research and Motor Octane numbers to the prediction of engine auto-ignition" SAE 2004-01-1970, 2004.
20. Ciezki, H. K., and Adomeit, G., "Shock-tube investigation of self-ignition of n -heptane-air mixtures under engine relevant conditions," Combust. Flame 93, 421-433 (1993). (Pubitemid 23173007)
21. Fieweger, K., Blumenthal, R., and Adomeit, G.,: "Self-igntion of S.I. engine model fuels: a shock tube investigation at high pressure," Combust. Flame, 109, 599-619 (1997). (Pubitemid 27221027)
22. Douaud, A. M., and Eyzat, P., "Four-Octane-Number method for predicting the anti-knock behavior of fuels and engines," SAE paper 780080, SAE Trans., vol. 87, 1978.
23. Hirst, S. L., and Kirsch, L. J., "The Application of a Hydrocarbon Autoignition Model in Simulating Knock and Other Engine Combustion Phenomena," in Combustion Modeling in Reciprocating Engines, edited by Mattavi J. N., and Amann C. A., Plenum Publishing, New York, 1980.
24. Cowell, L.H., and Lefebvre, A.H., "Influence of pressure on autoignition characteristics of gaseous hydrocarbon-air mixtures" SAE 860068, 1986.
25. Davidson, D.F., Gauthier, B.M., and Hanson, R.K., "Shock tube ignition measurements of iso-octane/air and toluene/air at high pressures" Proceedings of the 30th International Combustion Symposium, 2004.
26. Leppard, W.R., "The chemical origin of fuel octane sensitivity" SAE 902137, 1990.
27. Griffiths, J.F., Halford-Maw, P.A., and Mohammed, C., "Spontaneous ignition delays as a diagnostic of the propensity of alkanes to cause engine knock" Combustion and Flame 111, pp 327-337, 1997. (Pubitemid 27446786)
28. American Society for Testing Materials: Designation: D 2699-03a, "Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel" Annual book of ASTM Standards, vol. 5.05, 2003
29. American Society for Testing Materials: Designation: D 2700-03a, "Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel" Annual book of ASTM Standards, vol. 5.05, 2003.
30. American Society for Testing Materials: Designation: D 613, "Test method for cetane number of diesel fuel oil" Annual book of ASTM Standards, vol. 5.05, 2003.
31. American Society for Testing Materials: Designation: D 6890-03a, "Standard test method for determination of ignition delay and derived cetane number (DCN) of diesel fuel oils by combustion in a constant volume chamber" Annual book of ASTM Standards, vol. 5.05, 2003.
32. Ryan, T.W., and Matheaus, A., "Fuel requirements for HCCI engine operation" THIESEL 2002, Thermo and Fluid Dynamic Processes in Diesel Engines, 2002.
33. Tanaka, S., Ayala, F., Keck, J.C., and Heywood, J.B, "Two-stage ignition in HCCI combustión and HCCI combustion control by fuels and additives" Combust. Flame, vol. 132, pp 219-239, 2003. (Pubitemid 36164894)
34. Bell, A.G., "The relationship between octane quality and octane requirement" SAE 750935, 1975
35. Arrigoni, V., Cornetti, G.M., Spallanzani, G., Calvi, F., and Tontodonati, A., "High speed knock in S.I. engines" SAE 741056, 1974
36. Ingamells, J.C., and Jones, E.R., "Developing road octane correlations from octane requirement surveys" SAE 810492, 1981
37. Millo, F., Ferraro, C.V., and Rocco, M., "The effect of unleaded gasoline formulation on antiknock performance" SAE 941862, 1994 Also in SAE SP-1054
38. Kalghatgi, G.T., "Fuel anti-knock quality-Part I, Engine Studies" SAE 2001-01-3584, 2001, SAE Transactions-Journal of Fuels and Lubricants, Vol. 110.
39. Kalghatgi, G.T., "Fuel anti-knock-Part II. Vehicle studies- how relevant is Motor Octane Number (MON) for modern engines?" SAE 2001-01-3585, 2001, SAE Transactions-Journal of Fuels and Lubricants, Vol. 110.
40. Kalghatgi, G., Risberg, P., and Angström H-E, "A method of defining ignition quality of fuels in HCCI engines" JSAE 20030120, SAE 2003-01-1816, 2003
41. Risberg, P., Kalghatgi, G., and Angström H-E, "Auto-ignition quality of gasoline-like fuels in HCCI engines" SAE 2003-01-3215, 2003
42. Kalghatgi, G.T., and Head, R.A., "The available and required auto-ignition quality of gasoline-like fuels in HCCI engines at high temperatures"-SAE 2004-01-1969, 2004.
43. Risberg, P., Kalghatgi, G., and Angström H-E, "The influence of EGR on auto-ignition quality of gasoline-like fuels in HCCI engines" SAE 2004-01-2952, 2004
44. Kalghatgi, G.T., and Head, R.A., "Limits of combustion in an HCCI engine" To be published.
45. Analysis of CORC octane test data 1986-1992. Shell Internal report
46. McNally, M.J., Callison, J.C., Evans, B., Graham, J.P., Swaynos, D.V., Uihlein, J.P., and Wusz, T., "The effect of gasoline octane quality on vehicle acceleration performance-A CRC study" SAE 912304, 1991
47. Coordinating Research Council Inc., "Vehicle performance effect of octane on knock sensor equipped vehicles" CRC Report No. 597, 1995.
48. Whelan, D.E., Schmidt, G.K., and Hischier, M.E., "An acceleration based method to determine the octane number requirement of knock sensor vehicles" SAE 982721, 1998.
49. Sugawara, Y., Akasaka, Y., and Kagami, M., "Effects of gasoline properties on acceleration performance of commercial vehicles." SAE 971725, 1997.
50. Kalghatgi, G.T., Nakata, K., and Mogi, K., "Octane appetite studies in direct injection spark ignition (DISI) engines" SAE 2005-01-0244, 2005.
51. Kalghatgi, G.T., Golombok, M., and Snowdon, P., "Fuel effects on knock, heat release and ' CARS ' temperatures in a spark ignition engine" Combust.Sci.Tech., vols 110-111, pp 209-228, 1995.
52. Bradley, D., Kalghatgi, G.T., and Golombok, M., "Fuel blend and mixture strength effects on auto-ignition heat release rates and knock intensity in S.I.engines" SAE 962105 and SAE Transactions-Journal of Fuels and Lubricants, Vol. 105, 1996.
53. Akihama, K., Taki, M., Takasu, S., Ueda, T., Iwashita, Y., Farrell, J.T., and Weissman, W., "Fuel octane and composition effects on efficiency and emissions in a high compression ratio SIDI engine" SAE 2004-01-1950, 2004.
54. Burluka, A.A., Liu, K., Sheppard, C.G.W., Smallbone, A.J., and Woolley, R., "The influence of simulated residual and NO concentrations on knock onset of PRFs and gasolines" SAE 2004-01-2998, 2004.
55. Hultqvist, A., Christensen, M., Johansson, B., Richter, M., Nygren, J., Hult, J., and Alden, M., "The HCCI combustion process in a single cycle-High-speed fuel tracer LIF and chemiluminescence imaging" SAE 2002-01-0424, 2002
56. Kitano, K., Nishiumi, R., Tsukasaki, Y., Tanaka, T., and Morinaga, M., "Effects of fuel properties on pre-mixed charge compression ignition combustion in a direct injection diesel engine" JSAE 20030117 and SAE 2003-01-1815, 2003
57. rd International Colloqium on Fuels, Esslingen, Editor, Bartz W.J., TAE, ISBN 3-924813-45-0, p 433, 2001.
58. EU Directive 2003/17/EC accessible through www.europa.eu.int/comm/ environment/air/transport.htm
59. "World Wide Fuels Charter" available from www.oica.net.
60. Methyl Tertiary Butyl Ether (MTBE), www.epa.gov/mtbe/
61. Burns, V.R., Rapp, L.A., Koehl, W.J., Benson, J.D., Hochhauser, A.M., Knepper, J.C., Leppard, W.R., Painter, L.J., Reuter, R.M., Rippon, B., and Rutherford, J.A., "Gasoline reformulation and vehicle technology effects on emissions-Auto/oil Air Quality Improvement Research Programme" SAE 952509 and related SAE papers found on www.sae.org.
62. MacKinven, R., and Hublin, M., "European Programme on Emissions, Fuels and Engine Technologies-Objectives and Design" SAE 961065, 1996 and related papers found on www.sae.org.
63. Van den Brink, P.J., and McDonald, C.R., "The Influence of the Fuel Hydrocarbon Composition on No Conversion in 3-Way Catalysts: the NoDx/Aromatics Effect" SAE 952399, 1995.
64. Lee, G.R., McDonald, C.R., Widdicombe, K.A., and van den Brink, P.J., "The role of methane on catalyst conversion of NOx: A study based on FTIR" SAE 96115, 1996
65. Stradling, R., Zemroch, P.J., Thompson, N., Bazzani, R., Bjordal, S.D., Schmelze, P., Wolff, G., Rikeard, D.J., Martinez, P.M., and Scorletti, P., "Fuel effects on regulated emissions from modern gasoline vehicles" SAE 2004-01-1886.
66. Kalghatgi, G.T., "Deposits in gasoline engines-a literature review" SAE Paper No. 902105, SAE Transactions-Journal of Fuels and Lubricants, Vol. 109, 1990.
67. Kalghatgi, G.T., "Combustion Chamber Deposits in Spark-Ignition Engines-A Literature Review" SAE Paper No. 952443, SAE Transactions-Journal of Fuels and Lubricants, Vol. 104, 1995
68. Andrae, J., Johansson, D., Björnbom, P., Risberg, P., and Kalghatgi, G.,"Co-oxidation reactions in the auto-ignition of primary reference fuels and n-heptane/toluene blends" accepted for publication in Combustion and Flame, 2005.