Review on battery thermal management system for electric vehicles

Applied Thermal Engineering

Volumn 149, Issue , 2019, Pages 192-212

  Kim, Jaewan ^a   Oh, Jinwoo ^a   Lee, Hoseong ^a  

^a Korea University   (South Korea)

Author keywords

Battery thermal management; Lithium ion battery; Next generation battery; Vapor compression cycle

Indexed keywords

BATTERY MANAGEMENT SYSTEMS; COOLING; ELECTRIC VEHICLES; HEAT PIPES; IONS; PHASE CHANGE MATERIALS; TEMPERATURE CONTROL; THERMAL MANAGEMENT (ELECTRONICS);

BATTERY THERMAL MANAGEMENTS; HEAT PIPE COOLING; HIGH ENERGY DENSITIES; MAXIMUM TEMPERATURE; MAXIMUM TEMPERATURE DIFFERENCES; NEXT GENERATION BATTERY; THERMOELECTRIC ELEMENT; VAPOR COMPRESSION CYCLE;

LITHIUM-ION BATTERIES;

EID: 85058237276     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2018.12.020     Document Type: Review

References (164)

1. International Energy Agency. https://www.iea.org/publications/freepublications/publication/GlobalEVOutlook2017.pdf [accessed 2018-02-27].
2. H.P.J. De Wilde, P. Kroon, Policy options to reduce passenger cars CO2 emissions after 2020.ECN. ECNE13005 2013.
3. Oberthür, S., The new climate policies of the European Union: internal legislation and climate diplomacy. ASP/VUBPRESS/UPA, 2010.
4. Dunn, B., Kamath, H., Tarascon, J.M., Electrical energy storage for the grid: a battery of choices. Science 334 (2011), 928–935.
5. Lukic, S.M., Cao, J., Bansal, R.C., Rodriguez, F., Emadi, A., Energy storage systems for automotive applications. IEEE Trans. Ind. Electron. 55 (2008), 2258–2267.
6. Budde Meiwes, H., Drillkens, J., Lunz, B., Muennix, J., Rothgang, S., Kowal, J., Sauer, D.U., A review of current automotive battery technology and future prospects. Automobile Eng. 227 (2013), 761–776.
7. Bukhari, S.M.A.S., Maqsood, J., Baig, M.Q., Ashraf, S., Khan, T.A., Comparison of Characteristics-Lead Acid, Nickel Based. 2015, Lead Crystal and Lithium Based Batteries, IEEE Modelling and Simulation (UKSim).
8. Lowe, M., Tokuoka, S., Trigg, T., Gereffi, G., Lithium-ion batteries for electric vehicles. 2010, Duke University Center on Globalization, Governance and Competitiveness, Tech. Rep.
9. J.M. Tarascon, M. Armand, Issues and challenges facing rechargeable lithium batteries. In Materials For Sustainable Energy. A Collection of Peer-Reviewed Research and Review Articles from Nature Publishing Group 2011. p. 171-179.
10. Sasaki, T., Ukyo, Y., Novák, P., Memory effect in a lithium-ion battery. Nat. Mater., 12, 2013, 569.
11. Etacheri, V., Marom, R., Elazari, R., Salitra, G., Aurbach, D., Challenges in the development of advanced Li-ion batteries: a review. Energy Environ. Sci. 4 (2011), 3243–3262.
12. Bandhauer, T.M., Garimella, S., Fuller, T.F., A critical review of thermal issues in lithium-ion batteries. Electrochem. Soc. 158 (2011), R1–R25.
13. Smith, K., Wang, C.Y., Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles. Power Sources 160 (2006), 662–673.
14. Pesaran, A.A., Battery thermal management in EV and HEVs: issues and solutions. Battery Man 43 (2001), 34–49.
15. Pesaran AA., Santhanagopalan S, Kim GH. Addressing the impact of temperature extremes on large format li-ion batteries for vehicle applications (presentation). No. NREL/PR-5400-58145. National Renewable Energy Lab.(NREL), Golden, CO (United States), 2013.
16. Pesaran, A.A., Battery thermal models for hybrid vehicle simulations. Power Sources 110 (2002), 377–382.
17. Wang, Q., Jiang, B., Li, B., Yan, Y., A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles. Renew. Sustain. Energy Rev. 64 (2016), 106–128.
18. Rao, Z., Wang, S., A review of power battery thermal energy management. Renew. Sustain. Energy Rev. 15 (2011), 4554–4571.
19. M.R. Cosley, M.P. Garcia, Battery thermal management system. Telecommunications Energy Conference, 2004. INTELEC 2004. 26th Annual International. IEEE, 2004.
20. Pan, D., Xu, S., Lin, C., Chang, G., Thermal management of power batteries for electric vehicles using phase change materials, A Review. SAE Technical Paper, 2016–01-1204.
21. Liu, H., Wei, Z., He, W., Zhao, J., Thermal issues about Li-ion batteries and recent progress in battery thermal management systems:a review. Energy Convers. Manage. 150 (2017), 304–330.
22. Xia, G., Cao, L., Bi, G., A review on battery thermal management in electric vehicle application. Power Sources 367 (2017), 90–105.
23. Larminie, J., Lowry, J., Electric vehicle technology explained. 2012, John Wiley & Sons.
24. Al Hallaj, S., Maleki, H., Hong, J.S., Selman, J.R., Thermal modeling and design considerations of lithium-ion batteries. Power Sources 83 (1999), 1–8.
25. Thomas, K.E., Newman, J., Thermal modeling of porous insertion electrodes. Electrochem. Soc. 150 (2003), A176–A192.
26. Gu, W.B., Wang, C.Y., Thermal-electrochemical modeling of battery systems. Electrochem. Soc. 147 (2000), 2910–2922.
27. Fotouhi, A., Auger, D.J., Propp, K., Longo, S., Wild, M., A review on electric vehicle battery modelling: from Lithium-ion toward Lithium-Sulphur. Renew. Sustain. Energy Rev. 56 (2016), 1008–1021.
28. Baba, N., Yoshida, H., Nagaoka, M., Okuda, C., Kawauchi, S., Numerical simulation of thermal behavior of lithium-ion secondary batteries using the enhanced single particle model. Power Sources 252 (2014), 214–228.
29. Peng, P., Jiang, F., Thermal safety of lithium-ion batteries with various cathode materials: a numerical study. Heat Mass Transf. 103 (2016), 1008–1016.
30. Lin, X., Perez, H.E., Mohan, S., Siegel, J.B., Stefanopoulou, A.G., Ding, Y., Castanier, M.P., A lumped-parameter electro-thermal model for cylindrical batteries. Power Sources 257 (2014), 1–11.
31. Martínez-Rosas, E., Vasquez-Medrano, R., Flores-Tlacuahuac, A., Modeling and simulation of lithium-ion batteries. Comput. Chem. Eng. 35 (2011), 1937–1948.
32. Samba, A., Omar, N., Gualous, H., Firouz, Y., Van den Bossche, P., Van Mierlo, J., Boubekeur, T.I., Development of an advanced two-dimensional thermal model for large size lithium-ion pouch cells. Electrochim. Acta 117 (2014), 246–254.
33. Guo, M., Kim, G.H., White, R.E., A three-dimensional multi-physics model for a Li-ion battery. Power Sources 240 (2016), 80–94.
34. Joshi, T., Capacity and power fade in lithium-ion batteries. PhD Thesis. Georgia Institute of Technology, 2016.
35. G.M. Ehrlich, Lithium-ion batteries. Handbook of batteries, 2002.35-53.
36. Ramadass, P., Haran, B., White, R., Popov, B.N., Capacity fade of Sony 18650 cells cycled at elevated temperatures: Part I. Cycling performance. J. Power Sources 112 (2002), 606–613.
37. Shim, J., Kostecki, R., Richardson, T., Song, X., Striebel, K.A., Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature. J. Power Sources 112 (2002), 222–230.
38. Amine, K., Liu, J., Belharouak, I., High-temperature storage and cycling of C-LiFePO 4/graphite Li-ion cells. Electrochem. Commun. 7 (2005), 669–673.
39. Liu, P., Wang, J., Hicks-Garner, J., Sherman, E., Soukiazian, S., Verbrugge, M., Tataria, H., Musser, J., Finamore, P., Aging mechanisms of LiFePO4 batteries deduced by electrochemical and structural analyses. J. Electrochem. Soc. 157 (2010), A499–A507.
40. Jaguemont, J., Boulon, L., Venet, P., Dubé Y., Sari, A., Lithium-ion battery aging experiments at subzero temperatures and model development for capacity fade estimation. IEEE Trans. Veh. Technol. 65 (2016), 4328–4343.
41. Zheng, Y., He, Y.B., Qian, K., Liu, D., Lu, Q., Li, B., Wang, X., Li, J., Kang, F., Influence of charge rate on the cycling degradation of LiFePO4/mesocarbon microbead batteries under low temperature. Ionics, 2017, 1–12.
42. Belt, J.R., Ho, C.D., Miller, T.J., Habib, M.A., Duong, T.Q., The effect of temperature on capacity and power in cycled lithium ion batteries. Power Sources 142 (2005), 354–360.
43. Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., Chen, C., Thermal runaway caused fire and explosion of lithium ion battery. Power Sources 208 (2012), 210–224.
44. Hammami, A., Raymond, N., Armand, M., Lithium-ion batteries: runaway risk of forming toxic compounds. Nature 424 (2003), 635–636.
45. Balakrishnan, P.G., Ramesh, R., Kumar, T.P., Safety mechanisms in lithium-ion batteries. Power Sources 155 (2006), 401–414.
46. Bhatia, P.C., Thermal analysis of lithium-ion battery packs and thermal management solutions. PhD Thesis, 2013, The Ohio State University.
47. Yang, N., Zhang, X., Shang, B., Li, G., Unbalanced discharging and aging due to temperature differences among the cells in a lithium-ion battery pack with parallel combination. Power Sources 306 (2016), 733–741.
48. Wu, J., B, Yufit, V., Marinescu, M., Offer, G.J., Martinezbotas, R.F., Brandon, N.P., Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs. Power Sources 243 (2013), 544–554.
49. Muratori, M. Thermal characterization of Lithium-ion battery cell. 2010.
50. Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., He, X., Thermal runaway mechanism of lithium ion battery for electric vehicles: a review. Energy Storage Mater. 10 (2018), 246–267.
51. Y. Ji, Low-temperature operation of Li-ion batteries for hybrid and electric vehicles. The Pennsylvania State University, 2014.
52. Smart, M.C., Ratnakumar, B.V., Surampudi, S., Wang, Y., Zhang, X., Greenbaum, S.G., Fultz, B., Irreversible capacities of graphite in low-temperature electrolytes for lithium-ion batteries. Electrochem. Soc. 146 (1999), 3963–3969.
53. Shiao, H.C.A., Chua, D., Lin, H.P., Slane, S., Salomon, M., Low temperature electrolytes for Li-ion PVDF cells. Power sources 87 (2000), 167–173.
54. Zhang, S.S., Xu, K., Jow, T.R., The low temperature performance of Li-ion batteries. Power Sources 115 (2003), 137–140.
55. Fan, J., On the discharge capability and its limiting factors of commercial 18650 Li-ion cell at low temperatures. Power Sources 117 (2003), 170–178.
56. Fan, J., Tan, S., Studies on charging lithium-ion cells at low temperatures. Electrochem. Soc. 153 (2006), A1081–A1092.
57. Wang, C., Appleby, A.J., Little, F.E., Low-temperature characterization of lithium-ion carbon anodes via microperturbation measurement. Electrochem. Soc., 149, 2002, A75460.
58. Stuart, T.A., Hande, A., HEV battery heating using AC currents. Power Sources 129 (2004), 368–378.
59. Alaoui, C., Salameh, Z.M., A novel thermal management for electric and hybrid vehicles. IEEE Trans. Veh. Technol. 54:2 (2005), 468–476.
60. J. Li, P. Wu, H. Tian, Researches on heating low-temperature lithium-ion power battery in electric vehicles. In Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), In: 2014 IEEE Conference and Expo (pp. 1-6).
61. Zhiguo, L.E.I., Zhang, C., Junqiu, L.I., Guangchong, F.A.N., Zhewei, L.I.N., Preheating method of lithium-ion batteries in an electric vehicle. Modern Power Syst. Clean Energy 3 (2015), 289–296.
62. Adair, D., Ismailov, K., Bakenov, Z., Thermal Management of Lithium-ion. Battery Packs., 2014.
63. Khan, M.R., Swierczynski, M.J., Kær, S.K., Towards an ultimate battery thermal management system: a review. Batteries, 3, 2017, 9.
64. Pesaran, A., Keyser, M., Burch, S., An approach for designing thermal management systems for electric and hybrid vehicle battery packs. 1999, National Renewable Energy Laboratory, Golden, CO (US).
65. Sabbah, R., Kizilel, R., Selman, J.R., Al-Hallaj, S., Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution. Power Sources 182 (2008), 630–638.
66. Teng, H., Yeow K. Design of direct and indirect liquid cooling systems for high-capacity, high-power lithium-ion battery packs. 1(2012–01-2017) Alternative Powertrains, 2012, 525–5360.
67. Zou, H., Jiang, B., Wang, Q., Tian, C., Yan, Y., Performance analysis of a heat pump air conditioning system coupling with battery cooling for electric vehicles. Energy Procedia 61 (2014), 891–894.
68. Scrosati, B., Garche, J., Tillmetz, W., Advances in battery technologies for electric vehicles. 2015, Woodhead Publishing.
69. Chen, K., Li, Z., Chen, Y., Long, S., Hou, J., Song, M., Wang, S., Design of parallel air-cooled battery thermal management system through numerical study. Energies, 10, 2017, 1677.
70. Huber, C., Kuhn, R., Thermal management of batteries for electric vehicles. Adv. Battery Technol. Electric Vehicles, 2015, 327–358.
71. G.H. Kim, A.A. Pesaran, Battery thermal management system design modeling. National Renewable Energy Laboratory. 2006.
72. H. Park, A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles. power sources 2013;239:30-6.
73. Xu, X.M., He, R., Research on the heat dissipation performance of battery pack based on forced air cooling. Power Sources 240 (2013), 33–41.
74. Sun, H., Dixon, R., Development of cooling strategy for an air cooled lithium-ion battery pack. Power Sources 272 (2014), 404–414.
75. Chen, K., Wang, S., Song, M., Chen, L., Structure optimization of parallel air-cooled battery thermal management system. Heat Mass Transf. 111 (2017), 943–952.
76. Xie, J., Ge, Z., Zang, M., Wang, S., Structural optimization of lithium-ion battery pack with forced air cooling system. Appl. Therm. Eng. 126 (2017), 583–593.
77. Hong, S., Zhang, X., Chen, K., Wang, S., Design of flow configuration for parallel air-cooled battery thermal management system with secondary vent. Heat Mass Transf. 116 (2018), 1204–1212.
78. Fan, L., Khodadadi, J.M., Pesaran, A.A., A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles. Power Sources 238 (2013), 301–312.
79. Wang, T., Tseng, K.J., Zhao, J., Wei, Z., Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies. Appl. Energy 134 (2014), 229–238.
80. Wang, T., Tseng, K.J., Zhao, J., Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model. Appl. Therm. Eng. 90 (2015), 521–529.
81. Yang, N., Zhang, X., Li, G., Hua, D., Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements. Appl. Therm. Eng. 80 (2015), 55–65.
82. Mahamud, R., Park, C., Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity. Power Sources 196 (2011), 5685–5696.
83. Yu, K., Yang, X., Cheng, Y., Li, C., Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack. Power Sources 270 (2014), 193–200.
84. Lu, Z., Meng, X.Z., Wei, L.C., Hu, W.Y., Zhang, L.Y., Jin, L.W., Thermal management of densely-packed EV battery with forced air cooling strategies. Energy Procedia 88 (2016), 682–688.
85. Choi, Y.S., Kang, D.M., Prediction of thermal behaviors of an air-cooled lithium-ion battery system for hybrid electric vehicles. Power Sources 270 (2014), 273–280.
86. Xun, J., Liu, R., Jiao, K., Numerical and analytical modeling of lithium ion battery thermal behaviors with different cooling designs. Power Sources 233 (2013), 47–61.
87. Zhu, C., Li, X., Song, L., Xiang, L., Development of a theoretically based thermal model for lithium ion battery pack. J. Power Sources 223 (2013), 155–164.
88. I.L. Krüger, D. Limperich, G. Schmitz, Energy consumption of battery cooling in hybrid electric vehicles. 2012.
89. K. Rahman, S. Jurkovic, C. Stancu, J. Morgante, P. Savagian, Design and performance of electrical propulsion system of extended range electric vehicle (EREV) Chevrolet Voltec. In Energy Conversion Congress and Exposition (ECCE), 2012 IEEE (pp. 4152-4159).
90. Jarrett, A., Kim, I.Y., Design optimization of electric vehicle battery cooling plates for thermal performance. Power Sources 196 (2011), 10359–10368.
91. Jarrett, A., Kim, I.Y., Influence of operating conditions on the optimum design of electric vehicle battery cooling plates. Power Sources 245 (2014), 644–655.
92. Jin, L.W., Lee, P.S., Kong, X.X., Fan, Y., Chou, S.K., Ultra-thin minichannel LCP for EV battery thermal management. Appl. Energy 113 (2014), 1786–1794.
93. Huo, Y., Rao, Z., Liu, X., Zhao, J., Investigation of power battery thermal management by using mini-channel cold plate. Energy Convers. Manage. 89 (2015), 387–395.
94. Zhao, J., Rao, Z., Li, Y., Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery. Energy Convers. Manage. 103 (2015), 157–165.
95. Qian, Z., Li, Y., Rao, Z., Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling. Energy Convers. Manage. 126 (2016), 622–631.
96. Lan, C., Xu, J., Qiao, Y., Ma, Y., Thermal management for high power lithium-ion battery by minichannel aluminum tubes. Appl. Therm. Eng. 101 (2016), 284–292.
97. Wang, C., Zhang, G., Meng, L., Li, X., Situ, W., Lv, Y., Rao, M., Liquid cooling based on thermal silica plate for battery thermal management system. Energy Research 41 (2017), 2468–2479.
98. Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., Fowler, M., Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery. Appl. Therm. Eng. 122 (2017), 80–90.
99. Malik, M., Dincer, I., Rosen, M.A., Mathew, M., Fowler, M., Thermal and electrical performance evaluations of series connected Li-ion batteries in a pack with liquid cooling. Appl. Therm. Eng. 129 (2018), 472–481.
100. Rao, Z., Qian, Z., Kuang, Y., Li, Y., Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface. Appl. Therm. Eng. 123 (2017), 1514–1522.
101. F. Schoewel, E. Hockgeiger, The High voltage batteries of the BMW i3 and i8 AABC 2014, February 3th- 7th, Atlanta. [accessed 2018-02-27].
102. S. George, Keith Ritter Bower, http://www.hybridcars.com/bmw-and-lg-chem-trump-tesla-in-battery-thermal-management [accessed 2018-02-27].
103. S. Ketkar, P. Laurain, R. McCormick, Battery system and method for cooling the battery system. U.S. Patent No. 9,379,420. 2016.
104. Electric Vehicles in America. http://www.slideshare.net/ap3slidshare/alfred-piggott-20120531-battery-cooling-system-layout-thermal-management-thermal [accessed 2018-02-27].
105. Carpenter, N. U.S. Patent No. 20120297809A1. Washington, DC: U.S. Patent and Trademark Office. 2012.
106. KULI Newsletter [accessed: 2018-02-27].
107. Markus Wawzyniak, Marcus Weinbrenner, Achim Wiebelt, MAHLE. Battery Thermal Management Architectures and Components. SAE 2015 Thermal Management Systems Symposium 2015.
108. I.L. Krüger, D. Limperich, G. Schmitz, Energy consumption of battery cooling in hybrid electric vehicles. 2012.
109. Kritzer, P., Döring, H., Emermacher, B., Improved safety for automotive lithium batteries: an innovative approach to include an emergency cooling element. Adv. Chem. Eng. Sci., 4, 2014, 197.
110. Baetens, R., Jelle, B.P., Gustavsen, A., Phase change materials for building applications: a state-of-the-art review. Energy Build. 42 (2010), 1361–1368.
111. Elefsiniotis, A., Becker, T., Schmid, U., Thermoelectric energy harvesting using phase change materials (PCMs) in high temperature environments in aircraft. Electronic Materials 43 (2014), 1809–1814.
112. Kuznik, F., David, D., Johannes, K., Roux, J.J., A review on phase change materials integrated in building walls. Renew. Sustain. Energy Rev. 15 (2011), 379–391.
113. Jaguemont, J., Omar, N., Van den Bossche, P., Van Mierlo, J., Phase-change materials (PCM) for automotive applications: a review. Appl. Therm. Eng. 132 (2018), 308–320.
114. Al Hallaj, S., Selman, J.R., A novel thermal management system for electric vehicle batteries using phase-change material. Electrochem. Soc. 147 (2000), 3231–3236.
115. Sharma, A., Tyagi, V.V., Chen, C.R., Buddhi, D., Review on thermal energy storage with phase change materials and applications. Renew. Sustain. Energy Rev. 13 (2009), 318–345.
116. Kizilel, R., Sabbah, R., Selman, J.R., Al-Hallaj, S., An alternative cooling system to enhance the safety of Li-ion battery packs. Power Sources 194 (2009), 1105–1112.
117. C. Huber, Phase Change Material in Battery Thermal Management Applications. PhD Thesis. Technische Universität München, 2017.
118. Wilke, S., Schweitzer, B., Khateeb, S., Al-Hallaj, S., Preventing thermal runaway propagation in lithium ion battery packs using a phase change composite material: An experimental study. Power Sources 340 (2017), 51–59.
119. Ling, Z., Wang, F., Fang, X., Gao, X., Zhang, Z., A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling. Appl. Energy 148 (2015), 403–409.
120. Wang, Z., Zhang, Z., Jia, L., Yang, L., Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery. Appl. Therm. Eng. 78 (2015), 428–436.
121. Lv, Y., Yang, X., Li, X., Zhang, G., Wang, Z., Yang, C., Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins. Appl. Energy 178 (2016), 376–382.
122. Wu, W., Wu, W., Wang, S., Thermal optimization of composite PCM based large-format lithium-ion battery modules under extreme operating conditions. Energy Convers. Manage. 153 (2017), 22–33.
123. Zhao, J., Lv, P., Rao, Z., Experimental study on the thermal management performance of phase change material coupled with heat pipe for cylindrical power battery pack. Exp. Therm Fluid Sci. 82 (2017), 182–188.
124. Hémery, C.V., Pra, F., Robin, J.F., Marty, P., Experimental performances of a battery thermal management system using a phase change material. Power Sources 270 (2014), 349–358.
125. Duan, X., Naterer, G.F., Heat transfer in phase change materials for thermal management of electric vehicle battery modules. Int. J. Heat Mass Transf. 53 (2010), 5176–5182.
126. Kizilel, R., Lateef, A., Sabbah, R., Farid, M.M., Selman, J.R., Al-Hallaj, S., Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature. Power Sources 183 (2008), 370–375.
127. Rao, Z., Huo, Y., Liu, X., Zhang, G., Experimental investigation of battery thermal management system for electric vehicle based on paraffin/copper foam. Energy Institute 88 (2015), 241–246.
128. Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., Zhang, J., An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack. Energy 113 (2016), 909–916.
129. Javani, N., Dincer, I., Naterer, G.F., Yilbas, B.S., Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles. Heat Mass Transf. 72 (2014), 690–703.
130. Javani, N., Dincer, I., Naterer, G.F., Rohrauer, G.L., Modeling of passive thermal management for electric vehicle battery packs with PCM between cells. Appl. Therm. Eng. 73 (2014), 307–316.
131. Wu, W., Wu, W., Wang, S., Thermal management optimization of a prismatic battery with shape-stabilized phase change material. Heat Mass Transf. 121 (2018), 967–977.
132. Rao, Z., Wang, S., Wu, M., Lin, Z., Li, F., Experimental investigation on thermal management of electric vehicle battery with heat pipe. Energy Convers. Manage. 65 (2013), 92–97.
133. Wu, M.S., Liu, K.H., Wang, Y.Y., Wan, C.C., Heat dissipation design for lithium-ion batteries. Power sources 109 (2002), 160–166.
134. Tran, T.H., Harmand, S., Sahut, B., Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery. Power Sources 265 (2014), 262–272.
135. Ye, Y., Saw, L.H., Shi, Y., Tay, A.A., Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging. Appl. Therm. Eng. 86 (2015), 281–291.
136. Zhao, R., Gu, J., Liu, J., An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries. J. Power Sources 273 (2015), 1089–1097.
137. Liu, F., Lan, F., Chen, J., Dynamic thermal characteristics of heat pipe via segmented thermal resistance model for electric vehicle battery cooling. Power Sources 321 (2016), 57–70.
138. Feng, L., Zhou, S., Li, Y., Wang, Y., Zhao, Q., Luo, C., Wang, G., Yan, K., Experimental investigation of thermal and strain management for lithium-ion battery pack in heat pipe cooling. Energy Storage 16 (2018), 84–92.
139. Ye, X., Zhao, Y., Quan, Z., Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA). Appl. Therm. Eng. 130 (2018), 74–82.
140. Rao, Z., Huo, Y., Liu, X., Experimental study of an OHP-cooled thermal management system for electric vehicle power battery. Exp. Therm Fluid Sci. 57 (2014), 20–26.
141. Wang, Q., Jiang, B., Xue, Q.F., Sun, H.L., Li, B., Zou, H.M., Yan, Y.Y., Experimental investigation on EV battery cooling and heating by heat pipes. Appl. Therm. Eng. 88 (2015), 54–60.
142. Liang, J., Gan, Y., Li, Y., Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures. Energy Convers. Manage. 155 (2018), 1–9.
143. Elsheikh, M.H., Shnawah, D.A., Sabri, M.F.M., Said, S.B.M., Hassan, M.H., Bashir, M.B.A., Mohamad, M., A review on thermoelectric renewable energy: Principle parameters that affect their performance. Renew. Sustain. Energy Rev. 30 (2014), 337–355.
144. He, W., Zhang, G., Zhang, X., Ji, J., Li, G., Zhao, X., Recent development and application of thermoelectric generator and cooler. Appl. Energy 143 (2015), 1–25.
145. Espinosa, N., Lazard, M., Aixala, L., Scherrer, H., Modeling a thermoelectric generator applied to diesel automotive heat recovery. J. Electron. Mater. 39 (2010), 1446–1455.
146. Karri, M.A., Thacher, E.F., Helenbrook, B.T., Exhaust energy conversion by thermoelectric generator: Two case studies. Energy Convers. Manage. 52 (2011), 1596–1611.
147. L.N. Goenka, D.T. Crane, L.E. Bell, Thermoelectric based heating and cooling system for a hybrid-electric vehicle. U.S. Patent No 7,246,496, 2007.
148. Zhao, D., Tan, G., A review of thermoelectric cooling: materials, modeling and applications. Appl. Therm. Eng. 66 (2014), 15–24.
149. Alaoui, C., Salameh, Z.M., A novel thermal management for electric and hybrid vehicles. IEEE Trans. Veh. Technol. 54 (2005), 468–476.
150. X. Zhang, KT C, CC C. Overview of thermoelectric generation for hybrid vehicles. Asian Electric Vehicles 2008;6:1119-24.
151. L.T. Yeh, R.C. Chu, Thermoelectric Coolers. ASME Press, 2002.
152. Bell, L.E., Cooling, heating, generating power, and recovering waste heat with thermoelectric systems. Science 321 (2008), 1457–1461.
153. Alaoui, C., Solid-state thermal management for lithium-ion EV batteries. IEEE Trans. Veh. Technol. 62 (2013), 98–107.
154. Esfahanian, V., Renani, S.A., Nehzati, H., Mirkhani, N., Esfahanian, M., Yaghoobi, O., Safaei, A., Design and Simulation of Air Cooled Battery Thermal Management System Using Thermoelectric for a Hybrid Electric Bus, 2013, Springer, Berlin, Heidelberg, 463–473.
155. Liu, Y., Yang, S., Guo, B., Deng, C., Numerical analysis and design of thermal management system for lithium ion battery pack using thermoelectric coolers. Adv. Mech. Eng., 6, 2014, 852712.
156. Troxler, Y., Wu, B., Marinescu, M., Yufit, V., Patel, Y., Marquis, A.J., Brandon, N.P., Offer, G.J., The effect of thermal gradients on the performance of lithium-ion batteries. J. Power Sources 247 (2014), 1018–1025.
157. Broussely, M., Battery requirements for HEVs, PHEVs, and EVs: an overview. Electric and Hybrid Vehicles: Power Sources. Models, Sustain., Infrastructure Market, 2010, 305–347.
158. Automotive, Kim KS., Next-generation Battery Technology applications (presentation). Hanon System Seminar in Korea Electronics. Technology Institute (KETI), 2017.
159. Wu, W., Yang, X., Zhang, G., Chen, K., Wang, S., Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system. Energy Convers. Manage. 138 (2017), 486–492.
160. Yamada, T., Koshiyama, T., Yoshikawa, M., Yamada, T., Ono, N., Analysis of a lithium-ion battery cooling system for electric vehicles using a phase-change material and heat pipes. Thermal Science Technol., 2017 12.1.
161. Wang, Q., Rao, Z., Huo, Y., Wang, S., Thermal performance of phase change material/oscillating heat pipe-based battery thermal management system. Thermal Sciences 102 (2016), 9–16.
162. Rao, Z., Wang, Q., Huang, C., Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system. Appl. Energy 164 (2016), 659–669.
163. Wei, Y., Agelin-Chaab, M., Experimental investigation of a novel hybrid cooling method for lithium-ion batteries. Appl. Therm. Eng. 136 (2018), 375–387.
164. H.S. Lee, J.W. Kim, Battery cooling unit and battery module including the same. KR. Patent No. 10-2018-0029056. 2018.