SCOPUS 정보 검색 플랫폼

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 33, Issue 3, 2002, Pages 899-918

Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal vs. lamellar structures

(5) Nalla, R K a Boyce, B L a Campbell, J P a Peters, J O a Ritchie, R O a

a Lawrence Berkeley National Laboratory (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK PROPAGATION; FATIGUE OF MATERIALS; HEAT TREATMENT; MICROSTRUCTURE; STRESS ANALYSIS; TURBINES;

FOREIGN-OBJECT DAMAGE (FOD); HIGH-CYCLE FATIGUE (HCF);

TITANIUM ALLOYS;

EID: 85046911161 PISSN: 10735623 EISSN: None Source Type: Journal
DOI: 10.1007/s11661-002-0160-z Document Type: Conference Paper

Times cited : (154)

References (74)

1
- 0003457172
- United States Air Force Scientific Advisory Board, SAF/AQQS: The Pentagon, Washington, DC
- (1992) Report of the AdHoc Committee on Air Force Aircraft Jet Engine Manufacturing and Production Processes

2
- 0030439336
- (1996) Int. J. Fracture , vol.80 , pp. 147-163
- Cowles, B.A.¹

3
- 0006262424
- Air Force Office of Scientific Research, Bolling AFB, Washington, DC
- (1996)
- Chang, J.C.I.¹

4
- 0019069520
- (1980) Exp. Mech. , vol.20 , pp. 357-364
- Nicholas, T.¹ Barber, J.R.² Bertke, R.S.³

5
- 0004188376
- European Structural Integrity Society Publication No. 18, eds., Mechanical Engineering Publications Ltd., London
- (1994) Fretting Fatigue
- Waterhouse, R.B.¹ Lindley, T.C.²

6
- 0033524574
- (1999) Acta Mater. , vol.47 , pp. 801-816
- Kruzic, J.J.¹ Campbell, J.P.² Ritchie, R.O.³

7
- 0032028843
- (1998) Mater. Sci. Eng. , vol.A243 , pp. 32-45
- Lütjering, G.¹

8
- 0002826802
- R.R. Boyer, D. Eylon, and G. Lütjering, eds., TMS, Warrendale, PA
- (1999) Fatigue Behavior of Titanium Alloys , pp. 23-30
- Thompson, A.W.¹

9
- 33645100629
- H. Kimura and O. Izumi, eds., TMS-AIME, Warrendale, PA
- (1981) Titanium '80, Science and Technology , vol.1 , pp. 671-681
- Williams, J.C.¹ Lütjering, G.²

10
- 0006189082
- R.I. Jaffee and H.M. Butte, eds., Plenum Press, New York, NY
- (1973) Titanium Science and Technology , vol.3 , pp. 2081-2095
- Lucas, J.J.¹

11
- 0021479910
- (1984) Metall. Trans. A , vol.15 A , pp. 1597-1605
- Peters, M.¹ Gysler, A.² Lütjering, G.³

12
- 30844464867
- F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA
- (1993) Titanium '92: Science and Technology , pp. 1635-1646
- Lütjering, G.¹ Albrecht, J.² Gysler, A.³

13
- 0020547781
- (1983) Fatigue Eng. Mater. Struct. , vol.6 , pp. 67-76
- Brown, C.W.¹ Hicks, M.A.²

14
- 0002263308
- R.R. Boyer, D. Eylon, and G. Lütjering, eds., TMS, Warrendale, PA
- (1999) Fatigue Behavior of Titanium Alloys , pp. 15-22
- Hines, J.A.¹ Peters, J.O.² Lütjering, G.³

15
- 0019115656
- H. Kimura and O. Izumi, eds., TMS-AIME, Warrendale, PA
- (1981) Titanium '80, Science and Technology , vol.2 , pp. 1875-1882
- Chesnutt, J.C.¹ Thompson, A.W.² Williams, J.³

16
- 0020597481
- (1983) Eng. Fract. Mech. , vol.17 , pp. 185-188
- Yoder, G.R.¹ Cooley, L.A.² Crooker, T.W.³

17
- 0017555173
- (1977) Metall. Trans. A , vol.8 A , pp. 1737-1743
- Yoder, G.R.¹ Cooley, L.A.² Crooker, T.W.³

18
- 0026131331
- (1991) Acta Mater. , vol.39 , pp. 401-410
- Ravichandran, K.S.¹

19
- 0016069375
- (1974) Mater. Sci. Eng. , vol.14 , pp. 229-238
- Irving, P.E.¹ Beevers, C.J.²

20
- 0018291726
- (1979) Eng. Fract. Mech. , vol.11 , pp. 805-816
- Yoder, G.R.¹ Cooley, L.A.² Crooker, T.W.³

21
- 0003676565
- EMAS Ltd., Warley, United Kingdom
- (1985) A Compendium of Fatigue Thresholds and Crack Growth Rates
- Taylor, D.¹

22
- 0002384996
- A. Carpinteri, ed., Elsevier Science B.V., Amsterdam. The Netherlands
- (1994) Handbook of Fatigue Crack Propagation in Metallic Structures , pp. 281-321
- Gregory, J.K.¹

23
- 0031205768
- (1997) Mater. Sci. Eng. , vol.A234-A236 , pp. 918-922
- Bache, M.R.¹ Evans, W.J.² McElhone, M.³

24
- 0032208389
- (1998) Scripta Mater. , vol.39 , pp. 1647-1652
- Thomas, J.P.¹

25
- 0032592136
- (1999) Int. J. Fatigue , vol.21 , pp. 733-741
- Sheldon, J.W.¹ Bain, K.R.² Donald, J.K.³

26
- 0033684315
- (2000) Int. J. Fatigue , vol.22 , pp. 521-529
- Lenets, Y.N.¹ Bellows, R.S.²

27
- 0030421756
- J.C.I. Chang, J. Coulter, D. Brei, D. Martinez, W. Hg, and P.P. Freidmann, eds., ASME, New York, NY, AMD
- (1996) Proc. ASME Aerospace Division , vol.52 , pp. 321-333
- Ritchie, R.O.¹

28
- 0003584545
- University of Dayton Report, Dayton, OH
- (1998) Summary of Available Information on the Processing of the Ti-6Al-4V HCF/LCF Program Plates
- Eylon, D.¹

29
- 0006213209
- Technical Report No. AFML-TR-78-68, Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH 1978
- Chesnutt, J.C.¹ Thompson, A.W.² Williams, J.C.³

30
- 0032653953
- (1999) Fat. Fract. Eng. Mater. Struct. , vol.22 , pp. 621-631
- Ritchie, R.O.¹ Davidson, D.L.² Boyce, B.L.³ Campbell, J.P.⁴ Roder, O.⁵

31
- 0035241972
- (2001) Eng. Fract. Mech. , vol.68 , pp. 129-147
- Boyce, B.L.¹ Ritchie, R.O.²

32
- 0020275824
- J. Bäcklund, A.F. Blom and C.J. Beevers, eds., EMAS, Warley, United Kingdom
- (1982) Fatigue Thresholds , vol.1 , pp. 45-58
- Döker, H.¹ Bachmann, V.² Marci, G.³

33
- 0023865783
- (1988) Fatigue Fract. Eng. Mater. Struct. , vol.11 , pp. 303-320
- Herman, W.A.¹ Hertzberg, R.W.² Jaccard, R.³

34
- 0006185596
- BOKU, Vienna, Austria, unpublished research
- (1998)
- Mayer, H.R.¹ Stanzl-Tschegg, S.E.²

35
- 0022889891
- R.O. Ritchie J. Lankford, eds., TMS-AIME. Warrendale. PA
- (1986) Small Fatigue Cracks , pp. 167-189
- Ritchie, R.O.¹ Yu, W.²

36
- 0023162663
- (1987) Eng. Fract. Mech. , vol.26 , pp. 471-473
- Lukáš, P.¹

37
- 0019658622
- (1981) Eng. Fract. Mech. , vol.15 , pp. 185-192
- Newmann, J.C.¹ Raju, I.S.²

38
- 0030737087
- (1997) Metall. Mater. Trans. A , vol.28 A , pp. 149-156
- Ravichandran, K.S.¹

39
- 0030871561
- (1997) Metall. Mater. Trans. A , vol.28 A , pp. 157-169
- Ravichandran, K.S.¹ Larsen, J.M.²

40
- 0034207388
- (2000) Metall. Mater. Trans. A , vol.31 A , pp. 1571-1583
- Peters, J.O.¹ Roder, O.² Boyce, B.L.³ Thompson, A.W.⁴ Ritchie, R.O.⁵

41
- 0006246886
- Ph.D. Thesis, R.O. Ritchie, advisor, University of California, Berkeley, CA, Dec.
- (2001)
- Boyce, B.L.¹

42
- 0034155586
- (2000) J. Appl. Mech. , vol.67 , pp. 207-209
- He, M.Y.¹ Hutchinson, J.W.²

43
- 0034307987
- (2000) Eng. Fract. Mech. , vol.67 , pp. 209-227
- Campbell, J.P.¹ Ritchie, R.O.²

44
- 0034307828
- (2000) Eng, Fract. Mech. , vol.67 , pp. 229-249
- Campbell, J.P.¹ Ritchie, R.O.²

45
- 0035274302
- (2001) Metall. Mater. Trans. A , vol.32 A , pp. 497-503
- Campbell, J.P.¹ Ritchie, R.O.²

46
- 0034131709
- (2000) Eng. Fract. Mech. , vol.65 , pp. 1-14
- He, M.Y.¹ Hutchinson, J.W.²

47
- 0034307916
- (2000) Eng. Fract. Mech. , vol.67 , pp. 193-207
- Peters, J.O.¹ Ritchie, R.O.²

48
- 0006170659
- in press
- (2001) Int. J. Fatigue
- Peters, J.O.¹ Ritchie, R.O.²

49
- 0035424236
- (2001) Mech. Mater. , vol.33 , pp. 441-454
- Boyce, B.L.¹ Chen, X.² Hutchinson, J.W.³ Ritchie, R.O.⁴

50
- 51649163257
- (1980) Metall. Trans. A , vol.11 A , pp. 837-843
- Davidson, D.L.¹ Eylon, D.²

51
- 0031191236
- (1997) J. Mater. Sci. , vol.32 , pp. 3435-3442
- Bache, M.R.¹ Evans, W.J.² Davies, H.M.³

52
- 0032664906
- (1999) Fatigue Fract. Eng. Mater. Struct. , vol.22 , pp. 581-590
- Murakami, Y.¹ Nomoto, T.² Ueda, T.³

53
- 0001874018
- H.O. Fuchs, ed., American Shot Peening Society, Paramus, NJ
- (1984) Proc. 2nd Int. Conf. Shot Peening , pp. 194-200
- Wagner, L.¹ Lütjering, G.²

54
- 0001142289
- G. Lütjering, V. Zwicker, and W. Bunk, eds., DGM, Oberursel, Germany
- (1985) Titanium Sciece and Technology. Proc. 5th Int. Conf. on Titanium , pp. 2139
- Adachi, S.¹ Wagner, L.² Lütjering, G.³

55
- 0028516453
- (1994) Int. J. Fatigue , vol.16 , pp. 443-452
- Evans, W.J.¹ Bache, M.R.²

56
- 0000620435
- G. Lütjering and H. Nowack, eds., Pergamon Press, Oxford, United Kingdom
- (1996) Fatigue '96, Proc. 6th Int. Congr. on Fatigue , vol.1 , pp. 493
- Marci, G.¹

57
- 0015967085
- (1974) Corrosion-NACE , vol.30 , pp. 28-35
- Wanhill, R.J.H.¹

58
- 0016036276
- (1974) Metall. Trans , vol.5 , pp. 723-731
- Dawson, D.B.¹ Pelloux, R.M.N.²

59
- 0019587274
- (1981) J. Testing Eval. , vol.9 , pp. 195-201
- Halliday, M.D.¹ Beevers, C.J.²

60
- 0025474067
- (1990) Scripta Metall. Mater. , vol.24 , pp. 1559-1563
- Ravichandran, K.S.¹

61
- 84987550808
- (1993) Fatigue Fract. Eng. Mater. Struct. , vol.16 , pp. 973-982
- Ogawa, T.¹ Tokaji, K.² Ohya, K.³

62
- 0033946997
- (2000) Mater. Sci. Eng. , vol.A287 , pp. 30-42
- Sinha, V.¹ Mercer, C.² Soboyejo, W.O.³

63
- 0021626988
- (1984) Int. Met. Rev. , vol.29 , pp. 445-476
- Suresh, S.¹ Ritchie, R.O.²

64
- 0018290095
- (1979) Eng. Fract. Mech. , vol.11 , Issue.1 , pp. 9-15
- Pustejovsky, M.A.¹

65
- 0018291280
- (1979) Eng. Fract. Mech. , vol.11 , Issue.1 , pp. 17-31
- Pustejovsky, M.A.¹

66
- 0019930993
- (1982) Fat. Eng. Mater. Struct. , vol.5 , pp. 1-17
- Gao, H.¹ Brown, M.W.² Miller, K.J.³

67
- 0028467520
- (1994) Fat. Eng. Mater. Struct. , vol.17 , pp. 829-838
- Tong, J.¹ Yates, J.R.² Brown, M.W.³

68
- 0020293746
- (1982) Metall. Trans. A , vol.13 A , pp. 2197-2204
- Nayeb-Hashemi, H.¹ McClintock, F.A.² Ritchie, R.O.³

69
- 84987546854
- ASTM STP 924, J.T. Fong and R.J. Fields, eds., ASTM, Philadelphia, PA
- (1988) Basic Question in Fatigue , vol.1 , pp. 260-280
- Smith, M.C.¹ Smith, R.A.²

70
- 0020826628
- (1983) Acta Metall. , vol.31 , pp. 1323-1330
- Tschegg, E.K.¹

71
- 0000887218
- S. Stanzl-Tschegg and H. Mayer, eds., BOKU, Vienna, Austria
- (2001) Proc. Int. Conf. Fatigue in the Very High Cycle Regime , pp. 129-140
- Peters, J.O.¹ Boyce, B.L.² Chen, X.³ McNaney, J.M.⁴ Hutchinson, J.W.⁵ Ritchie, R.O.⁶

72
- 0003017529
- ASM, Metals Park, OH
- (1976) Proc. 2nd Intl. Conf. on Mechanical Behavior of Materials , pp. 627-631
- Kitagawa, H.¹ Takahashi, S.²

73
- 0018295787
- (1979) Eng. Fract. Mech. , vol.11 , pp. 573-584
- El Haddad, M.H.¹ Topper, T.H.² Smith, K.N.³

74
- 0022913927
- (1986) Mater. Sci. Eng. , vol.84 , pp. 11-16
- Ritchie, R.O.¹ Lankford, J.²

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.