A non-probabilistic metric derived from condition information for operational reliability assessment of aero-engines

IEEE Transactions on Reliability

Volumn 64, Issue 1, 2015, Pages 167-181

  Sun, Chuang ^a   He, Zhengjia ^a   Cao, Hongrui ^a   Zhang, Zhousuo ^a   Chen, Xuefeng ^a   Zuo, Ming Jian ^b,c  

^a XI'AN JIAOTONG UNIVERSITY   (China)

^b UNIVERSITY OF ELECTRONIC SCIENCE AND TECHNOLOGY OF CHINA   (China)

^c UNIVERSITY OF ALBERTA   (Canada)

Author keywords

Condition information; individual aero engine; non probabilistic metric; operational reliability assessment; similarity index

Indexed keywords

COSINE TRANSFORMS; ENGINES; PRINCIPAL COMPONENT ANALYSIS; RELIABILITY; RELIABILITY ANALYSIS;

AERO-ENGINE; CONDITION INFORMATION; NON-PROBABILISTIC; OPERATIONAL RELIABILITY; SIMILARITY INDICES;

AIRCRAFT ENGINES;

EID: 85027957439     PISSN: 00189529     EISSN: None     Source Type: Journal    
DOI: 10.1109/TR.2014.2336032     Document Type: Article

References (64)

1. IEEE Standard Computer Dictionary: A Compilation of IEEE Standard Computer Glossaries IEEE, New York, NY, USA, 1990, NYISBN 1-55937-079-3.
2. E. Zio, "Reliability engineering: Old problems and new challenges,"Rel. Eng. Syst. Safety, vol. 94, no. 2, pp. 125-141, 2009.
3. R. B. Chinnam, "On-line reliability estimation of individual components using degradation signals," IEEE Trans. Rel., vol. 48, no. 4, pp. 403-412, Dec. 1999.
4. K. Kwon and D. M. Frangopol, "Bridge fatigue reliability assessment using probability density functions of equivalent stress range based on field monitoring data," Int. J. Fatigue, vol. 32, no. 8, pp. 1221-1232, 2010.
5. M. Haiba, D. C. Barton, P. C. Brooks, and M. C. Levesley, "Review of life assessment techniques applied to dynamically loaded automotive components," Comput. Struct., vol. 80, no. 5-6, pp. 481-494, 2002.
6. J. Xue and K. Yang, "Upper and lower bounds of stress-strength interference reliability with random strength-degradation," IEEE Trans. Rel., vol. 46, no. 1, pp. 142-145, Mar. 1997.
7. H. Lu, W. J. Kolarik, and S. S. Lu, "Real-time performance reliability prediction," IEEE Trans. Rel., vol. 50, no. 4, pp. 353-357, Dec. 2001.
8. S. Kumar and M. Pecht, "Modeling approaches for prognostics and health management of electronics," Int. J. Perform. Eng., vol. 6, no. 5, pp. 467-476, 2010.
9. M. Pecht, Prognostics and Health Management of Electronics. New York, NY, USA: Wiley, 2008.
10. J. Dai, D. Das, M. Ohadi, and M. Pecht, "Reliability risk mitigation of free air cooling through prognostics and health management," Appl. Energy, vol. 111, pp. 104-112, 2013.
11. L. D. Lopez, V. Challa, and M. Pecht, "Assessing the reliability of elastomer sockets in temperature environments," IEEE Trans. Device Mater. Rel., vol. 9, no. 1, pp. 80-86, 2009.
12. E. Zio, "Prognostics and health management of industrial equipment,"in Diagnostics and Prognostics of Engineering Systems: Methods and Techniques, S. Kadry, Ed. Hershey, PA, USA: IGI Global, 2012, pp. 333-356.
13. J. Lee, F. Wu, and W. Zhao, "Prognostics and health management design for rotary machinery systems - Reviews, methodology and applications,"Mech. Syst. Signal Process., vol. 42, pp. 314-334, 2014.
14. J. B. Coble, P. Ramuhalli, L. J. Bond, J. W. Hines, and B. R. Upadhyaya, Prognostics and Health Management in Nuclear Power Plants: A Review of Technologies and Applications. Richland, WA, USA: Pacific Northwest National Laboratory, 2012.
15. S. Cheng, M. H. Azarian, and M. Pecht, "Sensor systems for prognostics and health management," Sensors, vol. 10, no. 6, pp. 5774-5797, 2010.
16. P. Baraldi, F. Mangili, and E. Zio, "Investigation of uncertainty treatment capability of model-based and data-driven prognostic methods using simulated data," Rel. Eng. Syst. Safety, vol. 112, pp. 94-108, 2013.
17. M. Pecht and R. Jaai, "A prognostics and health management roadmap for information and electronics-rich systems," Microelectron. Rel., vol. 50, no. 3, pp. 317-323, 2010.
18. C. J. Li and H. Lee, "Gear fatigue crack prognosis using embedded model, gear dynamic model and fracture mechanics," Mech. Syst. Signal Process., vol. 19, no. 4, pp. 836-846, 2005.
19. A. K. Jalan and A. R. Mohanty, "Model based fault diagnosis of a rotor-bearing system for misalignment and unbalance under steady-state condition," J. Sound Vibrat., vol. 327, no. 3, pp. 604-622, 2009.
20. L. Baeza and H. J. Ouyang, "A railway track dynamics model based on modal substructuring and a cyclic boundary condition," J. Sound Vibrat., vol. 330, no. 1, pp. 75-86, 2011.
21. M. Pecht and J. Gu, "Physics-of-failure-based prognostics for electronic products," Trans. Inst. Meas. Control, vol. 31, no. 3, pp. 309-322, 2009.
22. J. Gu and M. Pecht, "Prognostics and health management using physics-of-failure," in Proc. Reliability and Maintainability Symp., RAMS 2008, 2008, pp. 481-487.
23. Z. P. Feng, M. J. Zuo, R. J. Hao, F. L. Chu, and M. E. Badaoui, "Gear damage assessment based on cyclic spectral analysis," IEEE Trans. Rel., vol. 60, no. 1, pp. 21-32, Mar. 2011.
24. Z. L. Liu, M. J. Zuo, and H. B. Xu, "Fault diagnosis for planetary gearboxes using multi-criterion fusion feature selection framework,"Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., vol. 227, no. 9, pp. 2064-2076, 2013.
25. Z. G. Tian and M. J. Zuo, "Health condition prediction of gears using a recurrent neural network approach," IEEE Trans. Rel., vol. 59, no. 4, pp. 700-705, Dec. 2010.
26. F. D. Maio, J. Hu, P. Tse, M. Pecht, K. Tsui, and E. Zio, "Ensemble-approaches for clustering health status of oil sand pumps," Expert Syst. Applicat., vol. 39, no. 5, pp. 4847-4859, Apr. 2012.
27. F. D. Maio, K. L. Tsui, and E. Zio, "Combining Relevance Vector Machines and exponential regression for bearing residual life estimation,"Mech. Syst. Signal Process., vol. 31, pp. 405-427, Aug. 2012.
28. E. Zio and F. D. Maio, "A data-driven fuzzy approach for predicting the remaining useful life in dynamic failure scenarios of a nuclear system,"Rel. Eng. Syst. Safety, vol. 95, no. 1, pp. 49-57, 2010.
29. R. Q. Yan and R. X. Gao, "Hilbert-Huang transform-based vibration signal analysis for machine health monitoring," IEEE Trans. Instrum. Meas., vol. 55, no. 6, pp. 2320-2329, 2006.
30. R. Q. Yan, R. X. Gao, and X. F. Chen, "Wavelets for fault diagnosis of rotary machines: A review with applications," Signal Process., vol. 96, pp. 1-15, 2014.
31. D. Siegel, C. Ly, and J. Lee, "Methodology and framework for predicting helicopter rolling element bearing failure," IEEE Trans. Rel., vol. 61, no. 4, pp. 846-857, Dec. 2012.
32. Z. J. Shen, Z. J. He, X. F. Chen, C. Sun, and Z. W. Liu, "A monotonic degradation assessment index of rolling bearings using fuzzy support vector data description and running time," Sensors, vol. 12, no. 8, pp. 10109-10135, 2012.
33. C. Sun, Z. S. Zhang, Z. J. He, Z. J. Shen, B. Q. Chen, and W. R. Xiao, "Novel method for bearing performance degradation assessment - A kernel locality preserving projection based approach," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., vol. 228, no. 3, pp. 548-560, 2014.
34. S. B. Wang et al., "Matching demodulation transform and synchrosqueezing in time-frequency analysis," IEEE Trans. Signal Process., vol. 62, no. 1, pp. 69-84, Jan. 2014.
35. S. B. Wang, W. G. Huang, and Z. K. Zhu, "Transient modeling and parameter identification based on wavelet and correlation filtering for rotating machine fault diagnosis," Mech. Syst. Signal Process., vol. 25, no. 4, pp. 1299-1320, 2011.
36. M. R. Maurya et al., "A framework for on-line trend extraction and fault diagnosis," Eng. Applicat. Artif. Intell., vol. 23, no. 6, pp. 950-960, 2010.
37. S. Charbonnier and F. Portet, "A self-tuning adaptive trend extraction method for process monitoring and diagnosis," J. Process Control, vol. 22, no. 6, pp. 1127-1138, 2012.
38. S. Dash, R. Rengaswamy, and V. Venkatasubramanian, "Fuzzy-logic based trend classification for fault diagnosis of chemical processes,"Comput. Chem. Eng., vol. 27, no. 3, pp. 347-362, 2002.
39. S. Charbonnier, C. Garcia-Beltan, C. Cadet, and S. Gentil, "Trends extraction and analysis for complex system monitoring and decision support,"Eng. Applicat. Artif. Intell., vol. 18, no. 1, pp. 21-36, 2005.
40. N. Gorjian et al., "A review on degradation models in reliability analysis,"in Engineering Asset Lifecycle Management. London, U.K.: Springer, 2010, pp. 369-384.
41. R. Jiang and A. K. Jardine, "Health state evaluation of an item: A general framework and graphical representation," Rel. Eng. Syst. Safety, vol. 93, no. 1, pp. 89-99, 2008.
42. B. J. Chen, X. F. Chen, B. Li, Z. J. He, H. R. Cao, and G. G. Cai, "Reliability estimation for cutting tools based on logistic regression model using vibration signals," Mech. Syst. Signal Process., vol. 25, no. 7, pp. 2526-2537, 2011.
43. G. G. Cai, X. F. Chen, B. Li, B. J. Chen, and Z. J. He, "Operation reliability assessment for cutting tools by applying a proportional covariate model to condition monitoring information," Sensors, vol. 12, no. 10, pp. 12964-12987, 2012.
44. V. T. Tran, H. T. Pham, B. S. Yang, and T. T. Nguyen, "Machine performance degradation assessment and remaining useful life prediction using proportional hazard model and support vector machine," Mech. Syst. Signal Process., vol. 32, pp. 320-330, 2012.
45. D. Lin, M. Wiseman, D. Banjevic, and A. K. S. Jardine, "An approach to signal processing and condition-based maintenance for gearboxes subject to tooth failure," Mech. Syst. Signal Process., vol. 18, no. 5, pp. 993-1007, 2004.
46. C. C. Lin and H. Y. Tseng, "A neural network application for reliability modelling and condition-based predictive maintenance," Int. J. Adv. Manuf. Technol., vol. 25, no. 1-2, pp. 174-179, 2005.
47. V. H. Nguyen and J. C. Golinval, "Fault detection based on kernel principal component analysis," Eng. Struct., vol. 32, no. 11, pp. 3683-3691, 2010.
48. Z. J. He, X. L. Zhang, and X. F. Chen, "A new method of reliability evaluation based on wavelet information entropy for equipment condition identification," J. Phys.: Conf. Series, vol. 364, pp. 1-8, 2012.
49. B. Scholkopf, A. Smola, and K.-R. Muller, "Nonlinear component analysis as a kernel eigenvalue problem," Neural Computat., vol. 10, no. 5, pp. 1299-1319, 1998.
50. Q. B. He, F. R. Kong, and R. Q. Yan, "Subspace-based gearbox condition monitoring by kernel principal component analysis," Mech. Syst. Signal Process., vol. 21, no. 4, pp. 1755-1772, 2007.
51. M. Žvokelj, S. Zupan, and I. Prebil, "Non-linear multivariate and multiscale monitoring and signal denoising strategy using Kernel Principal Component Analysis combined with Ensemble Empirical Mode Decomposition method," Mech. Syst. Signal Process., vol. 25, no. 7, pp. 2631-2653, 2011.
52. J. S. Taylor and N. Cristianini, Kernel Methods for Pattern Analysis. Cambridge, U.K.: Cambridge Univ. Press, 2004.
53. Y. Fu, Z. Li, T. S. Huang, and A. K. Katsaggelos, "Locally adaptive subspace and similarity metric learning for visual data clustering and retrieval," Comput. Vision Image Understand., vol. 110, no. 3, pp. 390-402, 2008.
54. F. Li, Q. H. Dai, W. L. Xu, and G. H. Er, "Weighted subspace distance and its applications to object recognition and retrieval with image sets,"IEEE Signal Process. Lett., vol. 16, no. 3, pp. 227-230, Mar. 2009.
55. p-norm,"IEEE Trans. Knowl. Data Eng., vol. 24, no. 2, pp. 365-382, Feb. 2011.
56. X. C. Wang, Z. Li, and D. C. Tao, "Subspaces indexing model on Grassmann manifold for image search," IEEE Trans. Image Process., vol. 20, no. 9, pp. 2627-2635, Sep. 2011.
57. Y. Su, Y. Fu, X. B. Gao, and Q. Tian, "Discriminant learning through multiple principal angles for visual recognition," IEEE Trans. Image Process., vol. 21, no. 3, pp. 1381-1389, Mar. 2012.
58. th Int. Conf. Machine Learning, Helsinki, Finland, Jul. 2008, pp. 376-383.
59. A. Saxena and K. Goebel, Turbo Fan Engine Degradation Simulation Dataset, NASA Ames Prognostics Data Repository, NASA Ames, Moffett Field, CA, USA, 2008 [Online]. Available: http://ti.arc.nasa.gov/tech/dash/pcoe/prognostic-data-repository/
60. A. Saxena, K. Goebel, D. Simon, and N. Eklund, "Damage propagation modeling for aircraft engine run-to-failure simulation," in Proc. Int. Conf. Prognostic and Health Management, Denver, CO, USA, Oct. 2008, pp. 1-9.
61. H. Qiu, J. Lee, and J. Lin, "Wavelet filter-based weak signature detection method and its application on roller bearing prognostics," J. Sound Vibrat., vol. 289, no. 4-5, pp. 1066-1090, 2006.
62. [Online]. Available: http://ti.arc.nasa.gov/tech/dash/pcoe/prognostic-data-repository/accessed Mar. 15, 2013
63. O' Connor and D. T. Patrick, "Commentary: Reliability-past, present, and future," IEEE Trans. Rel., vol. 49, no. 4, pp. 335-341, Dec. 2000.
64. X. D. Zhang, Matrix Analysis and Applications (in Chinese). Beijing, China: Tsinghua Univ. Press, 2004.