Broadening the Frequency Bandwidth of a Tire-Embedded Piezoelectric-Based Energy Harvesting System Using Coupled Linear Resonating Structure

IEEE/ASME Transactions on Mechatronics

Volumn 20, Issue 5, 2015, Pages 2085-2094

  Sadeqi, Soheil ^a   Arzanpour, Siamak ^a   Hajikolaei, Kambiz Haji ^a  

^a SIMON FRASER UNIVERSITY   (Canada)

Author keywords

Energy harvesting; piezoelectric; resonance frequency; rotary motion; tire; voltage bandwidth; wheel

Indexed keywords

BANDWIDTH; DEGREES OF FREEDOM (MECHANICS); NATURAL FREQUENCIES; PIEZOELECTRICITY; RESONANCE; TIRES; WHEELS;

ENERGY HARVESTING SYSTEMS; FREQUENCY BAND WIDTH; PIEZOELECTRIC; RESONANCE FREQUENCIES; RESONATING STRUCTURES; ROTARY MOTIONS; SINGLE DEGREE OF FREEDOMS; VIBRATION-BASED ENERGY HARVESTERS;

ENERGY HARVESTING;

EID: 85027947490     PISSN: 10834435     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMECH.2014.2362685     Document Type: Article

References (36)

1. K. Mnif, "A smart tire pressure monitoring system, " Sensors, vol. 18, no. 11, pp. 40-46, 2001.
2. T. Yamagiwa, M. Orita, and T. Harada, "Development of a tire pressure monitoring system for motorcycles, " JSAE Rev., vol. 4, no. 24, pp. 495-496, 2003.
3. C. Williams and R. Yates, "Analysis of a micro-electric generator for microsystems, " Sens. Actuators, vol. 52, no. 1-3, pp. 8-11, 1996.
4. S. Roundy, P. Wright, and J. Rabaey, "A study of low level vibrations as a power source for wireless sensor nodes, " Comput. Commun., vol. 26, no. 11, pp. 1131-1144, 2003.
5. S. Priya, "Advances in energy harvesting using low profile piezoelectric transducers, " J. Electroceram., vol. 19, pp. 167-184, 2007.
6. A. Chandrakasan, R. Amirtharajah, J. Goodman, and W. Rabiner, "Trends in low power digital signal processing, " in Proc. IEEE Int. Symp. Circuits Syst., 1988, pp. 604-607.
7. S. Meninger, J. Mur-Miranda, R. Amirtharajah, and A. Chandrakasan, "Vibration to electric energy conversion, " IEEE Trans. Very Large Scale Integr. (VLSI) Syst., vol. 9, no. 1, pp. 64-76, Feb. 2001.
8. W. Davis, N. Zhang, K. Camera, F. Chen, D. Markovic, N. Chan, B. Nikolic, and R. Brodersen, "A design environment for high throughput, low power dedicated signal processing systems, " presented at the IEEE Custom Integr. Circuits Conf., San Diego, CA, USA, 2001.
9. F. Khameneifar and S. Arzanpour, "Energy harvesting from pneumatic tires using piezoelectric transducers, " in ASME Conf. Proc. SMASIS, 2008, no. 426, pp. 333-339.
10. F. Khameneifar, S. Arzanpour, and M. Moallem, "A piezoelectric energy harvester for rotary motion applications: Design and experiments, " IEEE/ASME Trans. Mechatron., vol. 18, no. 5, pp. 1527-1534, Oct. 2013
11. P. Mitcheson, E. M. Yeatman, G. K. Rao, and A. S. Holmes, "Energy harvesting from human and machine motion for wireless electronic devices, " Proc. IEEE, vol. 96, no. 9, pp. 1457-1486, Sep. 2008.
12. L. Pinna, M. Valle, and G. Marco, "Experimental results of piezoelectric bender generators for the energy supply of smart wireless sensors, " in Proc. 13th Italian Conf. Sens. Microsyst., 2008, pp. 450-455.
13. M. Keck, "A new approach of a piezoelectric vibration-based power generator to supply next generation tire sensor systems, " in Proc. 2007 IEEE Sens., pp. 1299-1302.
14. N. Makki and R. Pop-Iliev, "Piezoelectric power generation for sensor applications: Design of a battery-less wireless tire pressure sensor, " Proc. SPIE, vol. 8066, p. 806618, 2011.
15. S. P. Beeby, M. J. Tudor, and N. M. White, "Energy harvesting vibration sources for microsystems applications, " Meas. Sci. Technol., vol. 17, no. 5, pp. 175-195, 2006.
16. T. V. Buren, P. D. Mitcheson, T. C. Green, and E. M. Yeatman, "Optimization of inertial micropower generators for human walking motion, " IEEE Sensors J., vol. 6, no. 1, pp. 28-28, Feb. 2006.
17. D. Zhu, M. J. Tudor, and S. P. Beeby, "Strategies for increasing the operating frequency range of vibration energy harvesters: A review, " Meas. Sci. Technol., vol. 21, no. 2, pp. 022001-1-022001-29, 2010.
18. J. Gieras, J.-H. Oh, M. Huzmezan, and H. Sane, "Electromechanical energy harvesting system US Patent, " U.S. Patent US 2009/0079200 A1, 2007.
19. G. Piazza, R. Abdolvand, G. K. Ho, and F. Ayazi, "Voltage-tunable piezoelectrically-transduced single-crystal silicon micromechanical resonators, " Sensors Actuators A: Phys., vol. 111, no. 1, pp. 71-78, 2004.
20. D. Scheibner, J. Mehner, D. Reuter, T. Gessner, and W. Dotzel, "A spectral vibration detection system based on tunable micromechanical resonators, " Sensors Actuators A: Phys., vol. 123, pp. 63-72, 2004.
21. T. Petropoulos, E. Yeatman, and P. D. Mitcheson, "Coupled resonators for power generation and sensing, " in Proc. Micromechan. Europe, Leuven, Belgium, 2004, pp. 261-264.
22. S. D. Nguyen; E. Halvorsen, and G. U. Jensen, "Wide-band MEMS energy harvester driven by colored noise, " J. Microelectromech. Syst., vol. 22, no. 4, pp. 892-900, 2013.
23. S. Shahruz, "Design of mechanical band-pass filters with large frequency bands for energy scavenging, " Mechatronics, vol. 16, pp. 523-531, 2006.
24. F. Khameneifar, M. Moallem, and S. Arzanpour, "Modeling and analysis of a piezoelectric energy scavenger for rotary motion applications, " ASME J. Vib. Acoust., no. 133, pp. 1-6, 2011.
25. M. A. Karami and D. J. Inman, "Analytical modeling and experimental verification of the vibrations of the zigzag microstructure for energy harvesting, " ASME J. Vib. Acoust., no. 133, 2011.
26. A. Erturk and a. D. Inman, "Issues in mathematical modeling of piezoelectric energy harvesters, " Smart Mater. Struct., vol. 17, no. 065016, 2008.
27. P. Wrigger and U. Nackenhorst, Analysis and Simulation of Contact Problems. Berlin, Germany: Springer-Verlag, 2006.
28. S. Magheri, M. Malvezzi, E. Meli, and A. Rindi. "An innovative wheel-rail contact model for multibody applications, " Wear, vol. 271, no. 1-2, pp. 462-471, 2011.
29. S. Magheri, M. Malvezzi, and E. Meli, "Development and implementation of a differential elastic wheel-rail contact model for multibody applications, " Veh. Syst. Dyn., vol. 49, no. 6, pp. 969-1001, 2011.
30. N. Kikuchi and J. T. Oden, Contact Problems in Elasticity. Philadelphia, PA: SIAM, 2006.
31. A. Erturk and D. Inman, "An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations, " Smart Mater. Struct., vol. 18, pp. 025009-1-025009-18, 2009.
32. H. Lee, "Dynamic stability of a rotating cantilever beam with in-plane base acceleration, " Eng. Comput., vol. 14, pp. 471-480, 1997.
33. H. Yoo and S. Shin, "Vibration analysis of rotating cantilever beams, " J. Sound Vib., no. 212, pp. 807-828, 1998.
34. M. Kermani, M. Moallem, and R. Patel, "Parameter selection and control design for vibration suppression using piezoelectric transducers, " Control Eng. Pract., vol. 12, pp. 1005-1015, 2004.
35. A. Erturk and D. J. Inman, "On mechanical modeling of cantilevered piezoelectric vibration energy harvesters, " J. Intell. Mater. Syst. Struct., vol. 19, no. 11, pp. 1311-1325, 2008.
36. D. Helbing and B. A. Huberman, "Coherent moving states in highway traffic, " Nature, vol. 396, pp. 738-740, 1998.