New heat transfer correlation for an HCCI engine derived from measurements of instantaneous surface heat flux

SAE Technical Papers

Volumn , Issue , 2004, Pages

  Chang, Junseok ^a   Güralp, Orgun ^a   Filipi, Zoran ^a   Assanis, Dennis ^a   Kuo, Tang Wei ^b   Najt, Paul ^b   Rask, Rod ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION CHAMBERS; DIESEL ENGINES; ENGINE CYLINDERS; GASOLINE; HEAT TRANSFER; IGNITION; POWERTRAINS; THERMOCOUPLES;

COMBUSTION CHAMBER WALLS; GAS-TO-WALL HEAT TRANSFER; HEAT FLUX MEASUREMENT; HEAT RELEASE ANALYSIS; HEAT TRANSFER CORRELATION; HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINES; SPATIAL VARIATIONS; SURFACE HEAT FLUXES;

HEAT FLUX;

EID: 85072431346     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2004-01-2996     Document Type: Conference Paper

References (46)

1. Stanglmaier, R. H., Roberts, C. E., "Homogeneous Charge Compression Ignition (HCCI): Benefits, Compromises, and Future Engine Applications" SAE Paper 1999-01-3682
2. Onishi, S., Jo, S. H., Shoda, K., Jo., P. D., Kato, S., "Active Thermo-Atmosphere Combustion (ATAC): A New Combustion Process for Internal Combustion Engines" SAE Paper 790501
3. Noguchi, M., Tanaka, Y., Tanaka, T., Takeuchi, Y., "A Study on Gasoline Engine Combustion by Observation of Intermediate Reactive Products during Combustion," SAE Paper 790840
4. Najt, P. M., Foster, D. E., "Compression-Ignited Homogeneous Charge Combustion" SAE Paper 830264
5. Christensen, M., Johansson, B., Hultqvist, A., "The Effect of Combustion Chamber Geometry on HCCI Operation" SAE Paper 2002-01-0425
6. Eichelberg, G., "Some New Investigations on Old Combustion Engine Problems" Engineering 148, 463-446. 547-560 (1939)
7. Annand, W. J. D., "Heat Transfer in the Cylinder of Reciprocating Internal Combustion Engines" Proc Instn Mech Engrs, Vol. 177, pp 973-990, 1963
8. Annand, W. J. D., Ma, T. H., "Instantaneous Heat Transfer Rates to the Cylinder Head Surface of a Small Compression-Ignition Engine" Proc Instn Mech Engrs, Vol. 185, pp 976-987, 1970-1971
9. Overbye, V. D., Bennethum, J. E., Uyehara, O. A., Myers, P. S., "Unsteady Heat Transfer in Engines" SAE Transaction s, 69, pp 461-494, 1961
10. Woschni, G., "A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine" SAE Paper 670931
11. Sihling, K., Woschni, G., "Experimental Investigation of the Instantaneous Heat Transfer in the Cylinder of a High Speed Diesel engine" SAE Paper 790833
12. Huber, K., Woschni, G., Zeilinger, K., "Investigations on Heat Transfer in Internal Combustion Engines under Low Load and Motoring Conditions" SAE Paper 905018
13. Sitkei, G., Ramanaiah, G. V., "Rational Approach for Calculation of Heat Transfer in Diesel Engines" SAE Paper 720027
14. Hohenberg, G. F., "Advanced Approaches for Heat Transfer Calculations" SAE Paper 790825
15. Han, S. B., Chung, Y. J., Kwon, Y. J., Lee S., "Empirical Formula for Instantaneous Heat Transfer Coefficient in Spark-Ignition Engine" SAE Paper 972995
16. Wimmer, A., Pivec, R., Sams, T., "Heat Transfer to the Combustion Chamber and Port Walls of IC Engines∼Measurement and Prediction" SAE Paper 2000-01-0568
17. Opris, M.C., Jason, R.R., Anderson, C.L., "A Comparison of Time-Averaged Piston Temperatures and Surface Heat Flux Between a Direct-Fuel Injected and Carbureted Two-Stroke Engine" SAE Paper 980763
18. Bendersky, D.A., "A Special Thermocouple for Measuring Transient Temperatures" Mechanical Engineering, Vol. 75, No. 2, pp. 117-121, 1953
19. Assanis, D.N., Friedman, F.A., Wiese, K., Zaluzec, M.J., and Rigsbee, J.M., "A Prototype Thin-Film Thermocouple for Transient Heat Transfer Measurements in Ceramic Coated Combustion Chambers" SAE paper 900691
20. Jackson, N.S., Pilley, A.D., Owen, N.J., "Instantaneous Heat Transfer in a Highly Rated DI Truck Engine" SAE paper 900692
21. Childs, P. R. N., Greenwood, J. R., and Long, C. A., "Heat Flux Measurement Techniques" Proc Instn Mech Engrs Vol 213 Part C
22. Assanis, D. N., Badillo, E., "Evaluation of Alternative Thermocouple Designs for Transient Heat Transfer Measurements in Metal and Ceramic Engine" SAE Paper 890571
23. Hayes, T. K., White, R. A., Peters, J. E., "Combustion Chamber Temperature and Instantaneous Local Heat Flux Measurements in a Spark Ignition Engine" SAE Paper 930217
24. Borman, G., Nishiwaki, K., "Internal-Combustion Engine Heat Transfer" Prog Energy Combust Sci, Vol. 13, pp 1-46, 1987
25. Cho, K., "Characterization of Combustion & Heat Transfer in a Direct Injection Spark Ignition Engine Through Measurements of Instantaneous Combustion Chamber Surface Temperature" Ph.D. Dissertation, 2003, University of Michigan
26. Osborne, R. J., Li, S. M., Stokes J., Lake, T. H., Heikal, M. R., "Evaluation of HCCI for Future Gasoline Powertrains" SAE Paper 2003-01-0750
27. Choi, G. H., Choi, K. H., Lee, J. T., Song, Y. S., Ryu, Y., Cho, J. W., "Analysis of Combustion Chamber Temperature and Heat Flux in a DOHC engine" SAE Paper 970895
28. Gatowski, J. A., Balles, E. N., Chun, K. M., Nelsom, F. E., Ekchian, J. A., Heywood, J. B., "Heat Release Analysis of Engine Pressure Data" SAE Paper 841359
29. Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill, 1988
30. Grimm, B. M., Johnson, R. T., "Review of Simple Heat Release Computations" SAE Paper 900445
31. Homsy, S. C., Atreya, A., "An Experimental Heat Release Rate Analysis of a Diesel Engine Operating under Steady State Conditions" SAE Paper 970889
32. Brunt, M. F., Rai, H., Emtage A. L., "The Calculation of Heat Release Energy from Engine Cylinder Pressure Data" SAE Paper 981052
33. Jensen, T. K., Schrammof, J., "Three-Zone Heat Release Model for Combustion Analysis in a Natural Gas SI Engine: Effects of Crevices and Cyclic Variations on UHC Emissions" SAE Paper 2000-01-2802
34. Press, W. H., Teukolsky, S. A., Vetterling, W. T., Flannery, B. P., Numerical Recipes in C, 2nd Edition, Cambridge University Press, 1992, pp. 650-655.
35. Sta, J., "A Universally Applicable Thermodynamic Method for T.D.C. Determination" SAE Paper 2000-01-0561
36. Brunt, M. F., Pond, C. R., "Evaluation of Techniques for Absolute Cylinder Pressure Correction" SAE Paper 970036
37. Klein, M., Eriksson, L., "A Specific Heat Ratio Model for Single-Zone Heat Release Models" SAE Paper 2004-01-1464
38. Depcik, C., "Open-Ended Thermodynamic Cycle Simulation" M.S. Thesis, 2000, University of Michigan, Ann Arbor
39. Mansouri, S. H., Heywood, J. B., Radhakrishnan, K., "Divided-Chamber Diesel Engine, Part I: A Cycle-Simulation which Predicts Performance and Emissions" SAE Paper 820273
40. Agarwal, A., Filipi, Z. S., Assanis, D. N., "Assessment of Single-and Two-Zone Turbulence Formulations for Quasi-Dimensional Modeling of Spark-Ignition Engine Combustion" Combust. Sci. and Tech., 1998, Vol. 136, pp 13-39 (Pubitemid 128484958)
41. Tsurushima, T., Kunishima, E., Asaumi, Y., Aoyagi, Y., Enomoto, Y., "The Effect of Knock on Heat Loss in Homogeneous Charge Compression Ignition Engines" SAE Paper 2002-01-0108
42. Product Information Coaxial Surface Thermocouple Probes, Medtherm Corporation, Huntsville, Alabama USA
43. Dent, J.C., and Sulaiman, S. J., "Convective and Radiative Heat Transfer in a High Swirl Direct Injection Diesel Engine" SAE Paper 770407
44. Amano, T., Morimoto, S., and Kawabata, Y., "Modeling of the Effect of Air/Fuel Ratio and Temperature Distribution on HCCI Engine" SAE Paper 2001-01-1024
45. Yelvington, P. E., Green, W. H., "Prediction of the Knock Limit and Viable Operating Range for a Homogeneous-Charge, Compression-Ignition (HCCI) Engine" SAE Paper 2003-01-1092
46. Aceves, S., M., Flowers, D. L., Westbrook, C. K., Smith, J. R., Pitz, W., Dibble, R., Christensen, M., Johansson, B., "A Multi-Zone Model for Prediction of HCCI Combustion and Emissions" SAE Paper 2000-01-0327