Self-healing epoxies and their composites

Self-Healing Polymers: From Principles to Applications

Volumn , Issue , 2013, Pages 361-380

  Jin, Henghua ^a   Hart, Kevin R ^a   Coppola, Anthony M ^a   Gergely, Ryan C ^a   Moore, Jeffrey S ^a   Sottos, Nancy R ^a   White, Scott R ^a  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

Author keywords

Capsule microcapsule healing; Fatigue; Fracture toughness; Impact damage; Intrinsic healing; Vascular healing

Indexed keywords

FATIGUE OF MATERIALS;

CAPSULE/MICROCAPSULE HEALING; IMPACT DAMAGES; INTRINSIC HEALING; SELF-HEALING; VASCULAR HEALING;

FRACTURE TOUGHNESS;

EID: 85018224084     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527670185.ch15     Document Type: Chapter

References (95)

1. Hollaway, L. (1993) Polymer Composites for Civil and Structural Engineering, Blackie Academic and Professional, London.
2. Baker, A.A., Jones, R., and Callinan, R.J. (1985) Damage tolerance of graphite epoxy composites. Compos. Struct., 4, 15-44.
3. Blaiszik, B.J., Kramer, S.L.B., Olugebefola, S.C., Moore, J.S., Sottos, N.R., and White, S.R. (2010) Self-healing polymers and composites. Annu. Rev. Mater. Res., 40, 179-211.
4. White, S.R., Sottos, N.R., Moore, J.S., Geubelle, P.H., Kessler, M.R., et al. (2001) Autonomic healing of polymer composites. Nature, 409, 794-797.
5. Caruso, M.M., Blaiszik, B.J., White, S.R., Sottos, N.R., and Moore, J.S. (2008) Full recovery of fracture toughness using a non-toxic solvent-based self-healing system. Adv. Funct. Mater., 18, 1898-1904.
6. Brown, E.N., White, S.R., and Sottos, N.R. (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite -part 2: in situ self-healing. Compos. Sci. Technol., 65, 2474-2480.
7. Brown, E.N., White, S.R., and Sottos, N.R. (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite -part 1: manual infiltration. Compos. Sci. Technol., 65, 2466-2473.
8. Jin, H., Miller, G.M., Sottos, N.R., and White, S.R. (2011) Fracture and fatigue response of a self-healing epoxy adhesive. Polymer, 52, 1628-1634.
9. Mangun, C.L., Mader, A.C., Sottos, N.R., and White, S.R. (2010) Self-healing of a high temperature cured epoxy using poly(dimethylsiloxane) chemistry. Polymer, 51, 4063-4068.
10. Liu, X., Zhang, H., Wang, J., Wang, Z., and Wang, S. (2012) Preparation of epoxy microcapsule based self-healing coatings and their behavior. Surf. Coat. Technol., 206, 4976-4980.
11. Kirkby, E.L., Michaud, V.J., Månson, J.A.E., Sottos, N.R., and White, S.R. (2009) Performance of self-healing epoxy with microencapsulated healing agent and shape memory alloy wires. Polymer, 50, 5533-5538.
12. Kirkby, E.L., Rule, J.D., Michaud, V.J., Sottos, N.R., White, S.R., and Månson, J.A.E. (2008) Embedded shape-memory alloy wires for improved performance of self-healing polymers. Adv. Funct. Mater., 18, 2253-2260.
13. Wilson, G.O., Caruso, M.M., Schelkopf, S.R., Sottos, N.R., White, S.R., and Moore, J.S. (2011) Adhesion promotion via noncovalent interactions in selfhealing polymers. ACS Appl. Mater. Inter., 3, 3072-3077.
14. Brown, E.N., Sottos, N.R., and White, S.R. (2002) Fracture testing of a self-healing polymer composite. Exp. Mech., 42, 372-379.
15. Rule, J.D., Brown, E.N., Sottos, N.R., White, S.R., and Moore, J.S. (2005) Wax-protected catalyst microcapsules for efficient self-healing materials. Adv. Mater., 17, 205-208.
16. Patel, A.J. 2011, Autonomic Healing of Low-velocity Impact Damage in Woven Fiver-Reinforced Composites. PhD Thesis. Dissertation. University of Illinois at Urbana-Champaign.
17. Jackson, A.C., Bartelet, J.A., Marczewski, K., Sottos, N.R., and Braun, P.V. (2011) Silica-protected micron and sub-micron capsules and particles for self-healing at the microscale. Macromol. Rapid Commun., 32, 82-87.
18. Jones, A.S., Rule, J.D., Moore, J.S., White, S.R., and Sottos, N.R. (2006) Catalyst morphology and dissolution kinetics for self-healing polymers'. Chem. Mater., 18, 1312-1317.
19. Wilson, G.O., Caruso, M.M., Reimer, N.T., White, S.R., Sottos, N.R., and Moore, J.S. (2008) Evaluation of ruthenium catalysts for ring-opening metathesis polymerization-based self-healing applications. Chem. Mater., 20, 3288-3297.
20. Guadagno, L., Longo, P., Raimondo, M., Naddeo, C., Mariconda, A., et al. (2011) Use of hoveyda-grubbs' second generation catalyst in self-healing epoxy mixtures. Compos. B, 42, 296-301.
21. Kamphaus, J.M., Rule, J.D., Moore, J.S., Sottos, N.R., and White, S.R. (2008) A new self-healing epoxy with tungsten (VI) chloride catalyst. J. R. Soc. Interface, 5, 95-103.
22. Li, H., Wang, R., and Liu, W. (2012) Preparation and self-healing performance of epoxy composites with microcapsules and tungsten (VI) chloride catalyst. J. Reinf. Plast. Compos., 31, 924-932.
23. Coope, T.S., Mayer, U.F.J., Wass, D.F., Trask, R.S., and Bond, I.P. (2011) Self-healing of an epoxy resin using scandium(III) triflate as a catalytic curing agent. Adv. Funct. Mater., 21, 4624-4631.
24. Cho, S.H., White, S.R., and Braun, P.V. (2009) Self-healing polymer coatings. Adv. Mater., 21, 645-649.
25. Yuan, Y.C., Rong, M.Z., Zhang, M.Q., Chen, B., Yang, G.C., and Li, X.M. (2008) Self-healing polymeric materials using epoxy/mercaptan as the healant. Macromolecules, 41, 5197-5202.
26. Yuan, Y.C., Ye, X.J., Rong, M.Z., Zhang, M.Q., Yang, G.C., and Zhao, J.Q. (2011) Self-healing epoxy composite with heat-resistant healant. ACS Appl. Mater. Interfaces, 3, 4487-4495.
27. Xiao, D.S., Yuan, Y.C., Rong, M.Z., and Zhang, M.Q. (2009) Self-healing epoxy based on cationic chain polymerization. Polymer, 50, 2967-2975.
28. Xiao, D.S., Yuan, Y.C., Rong, M.Z., and Zhang, M.Q. (2008) Hollow polymeric microcapsules: preparation, characterization and application in holding boron trifluoride diethyl etherate. Polymer, 50, 560-568.
29. Jin, H., Mangun, C.L., Stradley, D.S., Moore, J.S., Sottos, N.R., and White, S.R. (2012) Self-healing thermoset using encapsulated epoxy-amine healing chemistry. Polymer, 53, 581-587.
30. Caruso, M.M., Delafuente, D.A., Ho, V., Sottos, N.R., Moore, J.S., and White, S.R. (2007) Solvent-promoted self-healing epoxy materials. Macromolecules, 4, 8830-8832.
31. Sauvant-Moynot, V., Gonzalez, S., and Kittel, J. (2008) Self-healing coatings: an alternative route for anticorrosion protection. Prog. Org. Coat., 63, 307-315.
32. Grigoriev, D.O., Kohler, K., Skorb, E., Shchukin, D.G., and Mohwald, H. (2009) Polyelectrolyte complexes as a "smart" depot for self-healing anticorrosion coatings. Soft Matter, 5, 1426-1432.
33. Xiao, D.S., Yuan, Y.C., Rong, M.Z., and Zhang, M.Q. (2009) A facile strategy for preparing self-healing polymer composites by incorporation of cationic catalyst-loaded vegetable fibers. Adv. Funct. Mater., 19, 2289-2296.
34. Neuser, S., Michaud, S., and White, S.R. (2012) Improving solvent-based self-healing materials through shape memory alloys. Polymer, 53, 370-378.
35. Samadzadeh, M., Boura, S.H., Peikari, M., Ashrafi, A., and Kasiriha, M. (2011) Tung oil: an autonomous repairing agent for self-healing epoxy coatings. Prog. Org. Coat., 70, 383-387.
36. Jadhav, R.S., Hundiwale, D.G., and Mahulikar, P.P. (2010) Synthesis and characterization of phenol-formaldehyde microcapsules containing linseed oil and its use in epoxy for self-healing and anticorrosive coating. J. Appl. Polym. Sci., 119, 2911-2916.
37. Suryanarayana, C., Rao, K.C., and Kumar, D. (2008) Preparation and characterization of microcapsules containing linseed oil and its use in self-healing coatings. Prog. Org. Coat., 63, 72-78.
38. Kessler, M.R., and White, S.R. (2001) Self-activated healing of delamination damage in woven composites. Compos. A Appl. Sci. Manuf., 32, 683-699.
39. Kessler, M.R., Sottos, N.R., and White, S.R. (2003) Self-healing structural composite materials. Compos. A Appl. Sci. Manuf., 34, 743-753.
40. Yin, T., Rong, M.Z., Zhang, M.Q., and Zhao, J.Q. (2009) Durability of selfhealing woven glass fabric/epoxy composites. Smart Mater. Struct., 18, 074001.
41. Yin, T., Zhou, L., Rong, M.Z., and Zhang, M.Q. (2008) Self-healing woven glass fabric/epoxy composites with the healant consisting of micro-encapsulated epoxy and latent curing agent. Smart Mater. Struct., 17, 015019.
42. Patel, A.J., Sottos, N.R., Wetzel, E.D., and White, S.R. (2010) Autonomic healing of low-velocity impact damage in fiberreinforced composites. Compos. A Appl. Sci. Manuf., 41, 360-368.
43. Sanada, K., Itaya, N., and Shindo, Y. (2008) Self-healing of interfacial debonding in fiber-reinforced polymers and effect of microstructure on strength recovery. Open Mech. Eng. J., 2, 97-103.
44. Moll, J.L., White, S.R., and Sottos, N.R. (2010) A self-sealing fiber-reinforced composite. J. Compos. Mater., 44, 2573-2585.
45. Yin, T., Rong, M.Z., Wu, J., Chen, H., and Zhang, M.Q. (2008) Healing of impact damage in woven glass fabric reinforced epoxy composites. Compos. A Appl. Sci. Manuf., 39, 1479-1487.
46. Yuan, Y.C., Ye, Y., Rong, M.Z., Chen, H., Zhang, M.Q., et al. (2011) Self-healing of low-velocity impact damage in glass fabric/epoxy composites using an epoxy-mercaptan healing agent. Smart Mater. Struct., 20, 015024.
47. Barbero, E.J., and Ford, K.J. (2007) Characterization of self-healing fiberreinforced polymer-matrix composite with distributed damage. J. Adv. Mater., 39, 20-27.
48. Sanada, K., Yasuda, I., and Shindo, Y. (2006) Transverse tensile strength of unidirectional fibre-reinforced polymers and self-healing of interfacial debonding. Plast. Rubber Compos., 35, 67-72.
49. Blaiszik, B.J., Baginska, M., White, S.R., and Sottos, N.R. (2010) Autonomic recovery of fiber/matrix interfacial bond strength in a model composite. Adv. Funct. Mater., 20, 3547-3554.
50. Dry, C. (1996) Procedures developed for self-repair of polymer matrix composite materials. Compos. Struct., 35, 263-269.
51. Motuku, M., Vaidya, U.K., and Janowski, G.M. (1999) Parametric studies on self-repairing approaches for resin infused composites subjected to low velocity impact. Smart Mater. Struct., 8, 623-638.
52. Pang, J.W.C., and Bond, I.P. (2005) "Bleeding composites" -damage detection and self-repair using a biomimetic approach. Compos. A Appl. Sci. Manuf., 36, 183-188.
53. Bleay, S.M., Loader, C.B., Hawyes, V.J., Humberstone, L., and Curtis, P.T. (2001) A smart repair system for polymer matrix composites. Compos. A Appl. Sci. Manuf., 32, 1767-1776.
54. Pang, J.W.C., and Bond, I.P. (2005) A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility. Compos. Sci. Technol., 65, 1791-1799.
55. Hamilton, A.R., Sottos, N.R., and White, S.R. (2010) Self-healing of internal damage in synthetic vascular materials. Adv. Mater., 22, 5159-5163.
56. Toohey, K.S., Sottos, N.R., Lewis, J.A., Moore, J.S., and White, S.R. (2007) Self-healing materials with microvascular networks. Nat. Mater., 6, 581-585.
57. Trask, R.S., and Bond, I.P. (2006) Biomimetic self-healing of advanced composite structures using hollow glass fibres. Smart Mater. Struct., 15, 704-710.
58. Trask, R.S., Williams, G.J., and Bond, I.P. (2007) Bioinspired self-healing of advanced composite structures using hollow glass fibres. J. R. Soc. Interface, 4, 363-371.
59. Williams, G., Trask, R., and Bond, I. (2007) A self-healing carbon fibre reinforced polymer for aerospace applications. Compos. A Appl. Sci. Manuf., 38, 1525-1532.
60. Hamilton, A.R., Sottos, N.R., and White, S.R. (2012) Pressurized vascular systems for self-healing materials. J. R. Soc. Interface, 9, 1020-1028.
61. Wu, A.S., Coppola, A.M., Sinnott, M.J., Chou, T.-W., Thostenson, E.T., et al. (2012) Sensing of damage and healing in three-dimensional braided composites with vascular channels. Compos. Sci. Technol., 72, 1618-1626.
62. Norris, C.J., Meadway, G.J., O'sullivan, M.J., Bond, I.P., and Trask, R.S. (2011) Self-healing fibre reinforced composites via a bioinspired vasculature. Adv. Funct. Mater., 21, 3624-3633.
63. Toohey, K.S., Sottos, N.R., and White, S.R. (2009) Characterization of microvascular-based self-healing coatings. Exp. Mech., 49, 707-717.
64. Toohey, K.S., Hansen, C.J., Lewis, J.A., White, S.R., and Sottos, N.R. (2009) Delivery of two-part self-healing chemistry via microvascular networks. Adv. Funct. Mater., 19, 1399-1405.
65. Hansen, C.J., Wu, W., Toohey, K.S., Sottos, N.R., White, S.R., and Lewis, J.A. (2009) Self-healing materials with interpenetrating microvascular networks. Adv. Mater., 21, 4143-4147.
66. Hansen, C.J., White, S.R., Sottos, N.R., and Lewis, J.A. (2011) Accelerated self-healing via ternary interpenetrating microvascular networks. Adv. Funct. Mater., 21, 4320-4326.
67. Esser-Kahn, A.P., Thakre, P.R., Dong, H.F., Patrick, J.F., Vlasko-Vlasov, V.K., et al. (2011) Three-dimensional microvascular fiber-reinforced composites. Adv. Mater., 23, 3654-3658.
68. Huang, J.H., Kim, J., Agrawal, N., Sudarson, A.P., Maxim, J.E., et al. (2009) Rapid fabrication of bio-inspired 3D microfluidic vascular networks. Adv. Mater., 21, 3567-3571.
69. Bellan, L.M., Singh, S.P., Henderson, P.W., Porri, T.J., Craighead, H.G., and Spector, J.A. (2009) Fabrication of an artificial 3-dimensional vascular network using sacrificial sugar structures. Soft Matter, 5, 1354-1357.
70. Hong, Y., and Su, M. (2012) Multifunctional self-healing and self-reporting polymer composite with integrated conductive microwire networks. ACS Appl. Mater. Interfaces, 4, 3759-3764.
71. Rahmathullah, M.A.M., and Palmese, G.R. (2009) Crack-healing behavior of epoxy-amine thermosets. J. Appl. Polym. Sci., 113, 2191-2201.
72. Hayes, S.A., Jones, F.R., Marshiya, K., and Zhang, W. (2007) A self-healing thermosetting composite material. Compos. A Appl. Sci. Manuf., 38, 1116-1120.
73. Luo, X.F., Ou, R.Q., Eberly, D.E., Singhal, A., Viratyaporn, W., and Mather, P.T. (2009) A thermoplastic/thermoset blend exhibiting thermal mending and reversible adhesion. ACS Appl. Mater. Interfaces, 1, 612-620.
74. Pingkarawat, K., Wang, C.H., Varley, R.J., and Mouritz, A.P. (2012) Self-healing of delamination cracks in mendable epoxy matrix laminates using poly[ethylene-co-(methacrylic acid)] thermoplastic. Compos. A Appl. Sci. Manuf., 43, 1301-1307.
75. Outwater, J.O., and Gerry, D.J. (1969) On the fracture energy, rehealing velocity and refracture energy of cast epoxy resin. J. Adhes., 1, 290-298.
76. Miller, B., and Gaur, U. (1989) Regeneration of adhesive bonding in fiber resin systems. J. Adhes., 29, 103-110.
77. Tian, Q.A., Rong, M.Z., Zhang, M.Q., and Yuan, Y.C. (2010) Synthesis and characterization of epoxy with improved thermal remendability based on Diels-Alder reaction. Polym. Int., 59, 1339-1345.
78. Peterson, A.M., Jensen, R.E., and Palmese, G.R. (2010) Room-temperature healing of a thermosetting polymer using the Diels-Alder reaction. ACS Appl. Mater. Interfaces, 2, 1141-1149.
79. Peterson, A.M., Jensen, R.E., and Palmese, G.R. (2011) Thermoreversible and remendable glass-polymer interface for fiber-reinforced composites. Compos. Sci. Technol., 71, 586-592.
80. Jones, F.R., Zhang, W., and Hayes, S.A. (2007) Thermally induced self healing of thermosetting resins and matrices in smart composites.in Self Healing Materials, ed. S. van der Zwaag, Springer Series in Materials Science, vol. 100, pp. 69-93.
81. Hayes, S.A., Zhang, W., Branthwaite, M., and Jones, F.R. (2007) Self-healing of damage in fibre-reinforced polymermatrix composites. J. R. Soc. Interface, 4, 381-387.
82. Peterson, A.M., Kotthapalli, H., Rahmathullah, M.A.M., and Palmese, G.R. (2012) Investigation of interpenetrating polymer networks for self-healing applications. Compos. Sci. Technol., 72, 330-336.
83. Zako, M., and Takano, N. (1999) Intelligent material systems using epoxy particles to repair microcracks and delamination damage in GFRP. J. Intel. Mater. Syst. Struct., 10, 836-841.
84. Peterson, A.M., Jensen, R.E., and Palmese, G.R. (2009) Reversibly cross-linked polymer gels as healing agents for epoxy-amine thermosets. ACS Appl. Mater. Interfaces, 1, 992-995.
85. Meure, S., Wu, D.Y., and Furman, S. (2009) Polyethylene-co-methacrylic acid healing agents for mendable epoxy resins. Acta Mater., 57, 4312-4320.
86. Meure, S., Varley, R.J., Wu, D.Y., Mayo, S., Nairn, K., and Furman, S. (2012) Confirmation of the healing mechanism in a mendable EMAA-epoxy resin. Eur. Polym. J., 48, 524-531.
87. Meure, S., Wu, D.Y., and Furman, S.A. (2010) FTIR study of bonding between a thermoplastic healing agent and a mendable epoxy resin. Vib. Spectrosc., 52, 10-15.
88. Meure, S., Furman, S., and Khor, S. (2010) Poly[ethylene-co-(methacrylic acid)] healing agents for mendable carbon fiber laminates. Macromol. Mater. Eng., 295, 420-424.
89. Varley, R.J., and Charve, F. (2012) EMAA as a healing agent for mendable high temperature epoxy amine thermosets. Compos. A Appl. Sci. Manuf., 43, 1073-1080.
90. Varley, R.J., and Parn, G.P. (2012) Thermally activated healing in a mendable resin using a non woven EMAA fabric. Compos. Sci. Technol., 72, 453-460.
91. Wang, C.H., Sidhu, K., Yang, T., Zhang, J., and Shanks, R. (2012) Interlayer self-healing and toughening of carbon fibre/epoxy composites using copolymer films. Compos. A Appl. Sci. Manuf., 43, 512-518.
92. Yang, T., Wang, C.H., Zhang, J., He, S., and Mouritz, A.P. (2012) Toughening and self-healing of epoxy matrix laminates using mendable polymer stitching. Compos. Sci. Technol., 72, 1396-1401.
93. Pingkarawat, K., Wang, C.H., Varley, R.J., and Mouritz, A.P. (2012) Self-healing of delamination fatigue cracks in carbon fibre-epoxy laminate using mendable thermoplastic. J. Mater. Sci., 47, 4449-4456.
94. Hargou, K., Pingkarawat, K., Mouritz, A.P., and Wang, C.H. (2012) Ultrasonic activation of mendable polymer for self-healing carbon-epoxy laminates. J. Mater. Sci., 47, 4449-4456.
95. Rodriguez, E.D., Luo, X.F., and Mather, P.T. (2011) Linear/network poly(epsiloncaprolactone) blends exhibiting shape memory assisted self-healing (SMASH). ACS Appl. Mater. Inter., 3, 152-161.