Characterization of microvascular-based self-healing coatings

Experimental Mechanics

Volumn 49, Issue 5, 2009, Pages 707-717

  Toohey, K S ^a   Sottos, N R ^a   White, S R ^a  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

Author keywords

Autonomic; Coating; Fracture toughness; Microvascular; Self healing; Substrate

Indexed keywords

AUTONOMIC; BEAM BENDING; BIO-INSPIRED; CAPILLARY ACTION; CRACK PLANE; EPOXY COATINGS; FOUR-POINT; MATERIALS SYSTEMS; MICROCAPSULES; MICROVASCULAR; MICROVASCULAR NETWORK; NETWORK CHANNEL; POLYMER COATING; SELF-HEALING; SELF-HEALING COATING; SELF-HEALING OF CRACKS; SINGLE CRACK;

CATALYSIS; CATALYSTS; COATINGS; CRACKING (CHEMICAL); CRACKS; EPOXY RESINS; FRACTURE; NETWORK PROTOCOLS; PLASTIC COATINGS; SUBSTRATES;

FRACTURE TOUGHNESS;

EID: 68649104274     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-008-9176-7     Document Type: Article

References (40)

1. White SR, Sottos NR, Geubelle PH, Moore JS, Kessler MR, Sriram SR et al (2001) Autonomic healing of polymer composites. Nature 409:794-797. doi: 10.1038/35057232
2. Rule JD, Brown EN, Sottos NR, White SR, Moore JS (2005) Wax-protected catalyst microspheres for efficient self-healing. Adv Mater 172:205-208. doi: 10.1002/adma.200400607
3. Brown EN, Sottos NR, White SR (2002) Fracture testing of a self-healing polymer composite. Exp Mech 424:372-379. doi: 10.1007/BF02412141
4. Brown EN, White SR, Sottos NR (2004) Microcapsule induced toughening in a self-healing polymer composite. J Mater Sci 39:1703-1710. doi: 10.1023/ B:JMSC.0000016173.73733.dc
5. Brown EN, White SR, Sottos NR (2006) Fatigue crack propagation in microcapsule toughened epoxy. J Mater Sci 41:6266-6273. doi: 10.1007/ s10853-006-0512-y
6. Brown EN, White SR, Sottos NR (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite - part 1: Manual infiltration. Compos Sci Technol 65:2466-2473. doi: 10.1016/ j.compscitech.2005.04.020
7. Brown EN, White SR, Sottos NR (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite - part 2: In situ self-healing. Compos Sci Technol 65:2474-2480. doi: 10.1016/ j.compscitech.2005.04.053
8. Kessler MR, Sottos NR, White SR (2003) Self-healing structural composite materials. Compos Part A 34:743-753. doi: 10.1016/S1359-835X(03)00138-6
9. Dry C (1996) Procedures developed for self-repair of polymer matrix composite materials. Compos Struct 35:263-269. doi: 10.1016/ 0263-8223(96)00033-5
10. Pang JWC, Bond IP (2005) 'Bleeding composites' - enhanced damage detection and self repair using a biomimetic approach. Compos Part A 36:183-188
11. Pang JWC, Bond IP (2005) A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility. Compos Sci Technol 65:1791-1799. doi: 10.1016/j.compscitech.2005.03.008
12. Trask RS, Williams GJ, Bond IP (2007) Bioinspired self-healing of advanced composite structures using hollow glass fibres. J R Soc Interface 4:363-371. doi: 10.1098/rsif.2006.0194
13. Trask RS, Bond IP (2006) Biomimetic self-healing of advanced composite structures using hollow glass fibres. Smart Mater Struct 15:704-710. doi: 10.1088/0964-1726/15/3/005
14. Chen X, Dam MA, Ono K, Mal A, Shen H, Nutt SR et al (2002) A thermally re-mendable cross-linked polymeric material. Science 295:1698-1702. doi: 10.1126/science.1065879
15. Chen X, Wudl F, Mal AK, Shen H, Nutt SR (2003) New thermally remendable highly cross-linked polymeric materials. Macromolecules 36:1802-1807. doi: 10.1021/ma0210675
16. Kalista SJ Jr, Ward TC (2007) Thermal characteristics of the self-healing response in poly(ethylene-co-methacrylic acid) copolymers. J R Soc Interface 4:405-411. doi: 10.1098/rsif.2006.0169
17. Hayes SA, Jones FR, Marshiya K, Zhang W (2007) A self-healing thermosetting composite material. Compos Part A 384:1116-1120. doi: 10.1016/j.compositesa.2006.06.008
18. Hayes SA, Zhang W, Branthwaite M, Jones FR (2007) Self-healing of damage in fibre-reinforced polymer-matrix composites. J R Soc Interface 413:381-387. doi: 10.1098/rsif.2006.0209
19. Toohey KS (2007) Microvascular networks for continuous self-healing materials. Ph.D. thesis, Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign
20. Toohey KS, Sottos NR, Lewis JA, Moore JS, White SR (2007) Self-healing materials with microvascular networks. Nat Mater 68:581-585. doi: 10.1038/nmat1934
21. Aragón AM, Hansen CJ, Wu W, Geubelle PH, Lewis JA, White SR (2007) Computational design and optimization of a biomimetic self-healing/cooling material. In: Dapino MJ (ed) Proceedings of SPIE, vol 6526. SPIE, Bellingham, WA, p 65261G
22. Kim S, Lorente S, Bejan A (2006) Vascularized materials: Tree-shaped flow architectures matched canopy to canopy. J Appl Phys 1008:063525. doi: 10.1063/1.2349479
23. Williams HR, Trask RS, Knights AC, Williams ER, Bond IP (2008) Biomimetic reliability strategies for self-healing vascular networks in engineering materials. J R Soc Interface 524:735-747. doi: 10.1098/ rsif.2007.1251
24. Williams HR, Trask RS, Weaver PM, Bond IP (2008) Minimum mass vascular networks in multifunctional materials. J R Soc Interface 518:55-65. doi: 10.1098/rsif.2007.1022
25. Therriault D (2003) Directed assembly of three-dimensional microvascular networks. Ph.D. thesis, Department of Aerospace Engineering, University of Illinois at Urbana-Champaign
26. Therriault D, White SR, Lewis JA (2003) Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly. Nat Mater 24:265-271. doi: 10.1038/nmat863 doi: 10.1038/nmat863
27. Runyon MK, Johnson-Kerner BL, Ismagilov RF (2004) Minimal functional models of hemostasis in a biomimetic microfluidic system. Angew Chem Int Ed 43:1531-1536. doi: 10.1002/anie.200353428
28. Stroock AD, Cabodi M (2006) Microfluidic biomaterials. MRS Bull 31:114-119
29. Lim D, Kamotani Y, Cho B, Mazumder J, Takayama S (2003) Fabrication of microfluidic mixers and artificial vasculatures using a high-brightness diode-pumped Nd:YAG laser direct write method. Lab Chip 3:318-323. doi: 10.1039/b308452c
30. Williams HR, Trask RS, Bond IP (2007) Self-healing composite sandwich structures. Smart Mater Struct 164:1198-1207. doi: 10.1088/0964-1726/16/ 4/031
31. Brown EN, Kessler MR, Sottos NR, White SR (2003) In situ poly(ureaformaldehyde) microencapsulation of dicyclepentadiene. J Microencapsul 206:719-730. doi: 10.1080/0265204031000154160
32. Jones AS, Rule JD, Moore JS, White SR, Sottos NR (2006) Catalyst morphology and dissolution kinetics for self-healing polymers. Chem Mater 18:1312-1317. doi: 10.1021/cm051864s
33. Kim S-R, Nairn JA (2000) Fracture mechanics analysis of coating/ substrate systems Part I: Analysis of tensile and bending experiments. Eng Fract Mech 65:573-593. doi: 10.1016/S0013-7944(99)00141-1
34. Kim S-R, Nairn JA (2000) Fracture mechanics analysis of coating/ substrate systems part II: Experiments in bending. Eng Fract Mech 65:595-607. doi: 10.1016/S0013-7944(99)00142-3
35. Nairn JA, Kim S-R (1992) A fracture mechanics analysis of multiple cracking in coatings. Eng Fract Mech 421:195-208. doi: 10.1016/ 0013-7944(92)90291-L
36. Anderson TL (1995) Fracture mechanics fundamentals and applications, 2nd edn. CRC, New York, NY
37. Wool RP, O'Connor KM (1982) A theory of crack healing in polymers. J Appl Phys 52:5953-5963. doi: 10.1063/1.328526
38. Jud K, Kausch HH, Williams JG (1981) Fracture mechanics studies of crack healing and welding of polymers. J Mater Sci 16:204-210. doi: 10.1007/ BF00552073
39. Kausch HH, Jud K (1982) Molecular aspects of crack formation and healing in glassy polymers. Plast Rubber Process Appl 2:265-268
40. Wang EP, Lee S, Harmon J (1994) Ethanol-induced crack healing in poly(methyl methacrylate). J Polym Sci B Polym Lett 32:1217-1227