Light and gas barrier properties of PLLA/metallic nanoparticles composite films

European Polymer Journal

Volumn 91, Issue , 2017, Pages 10-20

  Lizundia, Erlantz ^a   Vilas, José Luis ^a,b   Sangroniz, Ainara ^c   Etxeberria, Agustin ^c  

^a UNIVERSITY OF THE BASQUE COUNTRY UPV EHU   (Spain)

^b BASQUE CENTER FOR MATERIALS   (Spain)

^c UNIVERSITY OF THE BASQUE COUNTRY UPV EHU   (Spain)

Author keywords

Gas transport; Metallic nanoparticle, nanocomposites; Packaging; Poly(L lactide)

Indexed keywords

COMPOSITE FILMS; DIFFERENTIAL SCANNING CALORIMETRY; DISPERSIONS; ELECTRON MICROSCOPY; GAS PERMEABILITY; GASES; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; METAL NANOPARTICLES; METALS; NANOCOMPOSITE FILMS; NANOCOMPOSITES; NANOPARTICLES; OXYGEN; PACKAGING; POLYESTERS; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY; WATER VAPOR;

GAS TRANSPORT; GAS TRANSPORT PROPERTIES; METAL OXIDE NANOPARTICLES; METALLIC NANOPARTICLES; NANO-PARTICLE DISPERSIONS; POLY (L-LACTIDE); POLYMER-BASED NANOCOMPOSITES; ZETA POTENTIAL MEASUREMENTS;

GAS PERMEABLE MEMBRANES;

EID: 85016425930     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2017.03.043     Document Type: Article

References (65)

1. [1] Drumright, R.E., Gruber, P.R., Henton, D.E., Polylactic acid technology. Adv. Mater. 12 (2000), 1841–1846.
2. [2] Ray, S.S., Bousmina, M., Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog. Mater Sci. 50 (2005), 962–1079.
3. [3] Koronis, G., Silva, A., Fontul, M., Composites: Part B Green composites: a review of adequate materials for automotive applications. Compos. Part B 44 (2013), 120–127.
4. [4] Gross, R.A., Kalra, B., Biodegradable polymers for the environment. Science 297 (2002), 803–807.
5. [5] Del Nobile, M.A., Conte, A., Incoronato, A.L., Panza, O., Antimicrobial efficacy and release kinetics of thymol from zein films. J. Food Eng. 89 (2008), 57–63.
6. [6] Auras, R., Harte, B., Selke, S., An overview of polylactides as packaging materials. Macromol. Biosci. 4 (2004), 835–864.
7. [7] Lasprilla, A.J.R., Martinez, G.A.R., Lunelli, B.H., Jardini, A.L., Filho, R.M., Poly-lactic acid synthesis for application in biomedical devices - A review. Biotechnol. Adv. 30 (2012), 321–328.
8. [8] Lizundia, E., Ruiz-Rubio, L., Vilas, J. Luis, Manuel Leon, L., Poly(L-lactide)/ZnO nanocomposites as efficient UV-shielding coatings for packaging applications. J. Appl. Polym. Sci., 132, 2016, 42426.
9. [9] Liu, G., Zhang, X., Wang, D., Tailoring crystallization: towards high-performance poly(lactic acid). Adv. Mater., 1–7, 2014.
10. [10] Meaurio, E., Martinez De Arenaza, I., Lizundia, E., Sarasua, J.R., Analysis of the C[dbnd]O stretching band of the α-crystal of poly(L-lactide). Macromolecules 42 (2009), 5717–5727.
11. [11] Lizundia, E., Petisco, S., Sarasua, J.R., Phase-structure and mechanical properties of isothermally melt-and cold-crystallized poly (L-lactide). J. Mech. Behav. Biomed. Mater. 17 (2012), 242–251.
12. [12] Lehermeier, H.J., Dorgan, J.R., Way, J.D., Gas permeation properties of poly(lactic acid). J. Membr. Sci. 190 (2001), 243–251.
13. [13] Auras, R.A., Singh, S.P., Singh, J.J., Evaluation of oriented poly(lactide) polymers vs. existing PET and oriented PS for fresh food service containers. Packag. Technol. Sci. 18 (2005), 207–216.
14. [14] Van Amerongen, G.J., Influence of structure of elastomers on their permeability to gases. Rubber Chem. Technol. 24 (1951), 109–131.
15. [15] Tsuda, K., Diffusion in polymers. Sen-Ito Kogyo 3 (1970), 729–734.
16. [16] Vrentas, J.S., Vrentas, C.M., Diffusion in glassy polymers. J. Polym. Sci., Part B: Polym. Phys. 41 (2003), 785–788.
17. [17] Merkel, T.C., He, Z., Pinnau, I., Freeman, B.D., Meakin, P., Hill, A.J., Effect of nanoparticles on gas sorption and transport in poly(1-trimethylsilyl-1-propyne). Macromolecules 36 (2003), 6844–6855.
18. [18] Su, N.C., Buss, H.G., McCloskey, B.D., Urban, J.J., Enhancing separation and mechanical performance of hybrid membranes through nanoparticle surface modification. ACS Macro Lett. 4 (2015), 1239–1243.
19. [19] Gorrasi, G., Bugatti, V., Vittoria, V., Pectins filled with LDH-antimicrobial molecules: preparation, characterization and physical properties. Carbohyd. Polym. 89 (2012), 132–137.
20. [20] Sondi, I., Salopek-Sondi, B., Silver nanoparticles as antimicrobial agent: a case study on E-coli as a model for Gram-negative bacteria. J. Colloid Interface Sci. 275 (2004), 177–182.
21. 2 nanoparticle nanocomposite films with high transparency and efficient photodegradability. Polym. Degrad. Stab. 92 (2007), 1255–1264.
22. [22] Liao, R., Yang, B., Yu, W., Zhou, C., Isothermal cold crystallization kinetics of polylactide/nucleating agents. J. Appl. Polym. Sci. 104 (2007), 310–317.
23. [23] Chen, C., Lv, G., Pan, C., Song, M., Wu, C., Guo, D., Wang, X., Chen, B., Gu, Z., Poly(lactic acid) (PLA) based nanocomposites-a novel way of drug-releasing. Biomed. Mater. 2 (2007), L1–L4.
24. [24] Zou, H., Wu, S., Shen, J., Polymer/silica nanocomposites: preparation, characterization, properties, and applications. Chem. Rev. 108 (2008), 3893–3957.
25. [25] Yan, S., Yin, J., Yang, J., Chen, X., Structural characteristics and thermal properties of plasticized poly(L-lactide)-silica nanocomposites synthesized by sol-gel method. Mater. Lett. 61 (2007), 2683–2686.
26. [26] Bruce, I.J., Taylor, J., Todd, M., Davies, M.J., Borioni, E., Sangregorio, C., Sen, T., Synthesis, characterisation and application of silica-magnetite nanocomposites. J. Magn. Magn. Mater. 284 (2004), 145–160.
27. [27] Lee, D., Zhang, L., Oyama, S.T., Niu, S., Saraf, R.F., Synthesis, characterization, and gas permeation properties of a hydrogen permeable silica membrane supported on porous alumina. J. Membr. Sci. 231 (2004), 117–126.
28. [28] Guo, Z., Pereira, T., Choi, O., Wang, Y., Hahn, H.T., Surface functionalized alumina nanoparticle filled polymeric nanocomposites with enhanced mechanical properties. J. Mater. Chem. 16 (2006), 2800–2808.
29. [29] Liang, X., King, D.M., Groner, M.D., Blackson, J.H., Harris, J.D., George, S.M., Weimer, A.W., Barrier properties of polymer/alumina nanocomposite membranes fabricated by atomic layer deposition. J. Membr. Sci. 322 (2008), 105–112.
30. [30] del Rio, J., Etxeberria, A., Lopez-Rodriguez, N., Lizundia, E., Sarasua, J.R., A PALS contribution to the supramolecular structure of poly(L-lactide). Macromolecules 43 (2010), 4698–4707.
31. [31] Sarasua, J.R., Prud'homme, R.E., Wisniewski, M., Le Borgne, A., Spassky, N., Crystallization and melting behavior of polylactides. Macromolecules 31 (1998), 3895–3905.
32. [32] Garcia, A., Eceolaza, S., Iriarte, M., Uriarte, C., Etxeberria, A., Barrier character improvement of an amorphous polyamide (Trogamid) by the addition of a nanoclay. J. Membr. Sci. 301 (2007), 190–199.
33. [33] Miguel, O., Iruin, J.J., Fernandez-Berridi, M.J., Survey on transport properties of liquids, vapors, and gases in biodegradable poly(3-hydroxybutyrate) (PHB). J. Appl. Polym. Sci. 64 (1996), 1849–1859.
34. [34] Mesquita-Guimarães, J., Leite, M.A., Souza, J.C.M., Henriques, B., Silva, F.S., Hotza, D., Boccaccini, A.R., Fredel, M.C., Processing and strengthening of 58S bioactive glass-infiltrated titania scaffolds. J. Biomed. Mater. Res. A 105 (2016), 590–600.
35. [35] Matori, K.A., Wah, L.C., Hashim, M., Ismail, I., Zaid, M.H. Mohd, Phase transformations of α-alumina made from waste aluminum via a precipitation technique. Int. J. Mol. Sci. 13 (2012), 16812–16821.
36. [36] Wu, W., Xiao, X.H., Zhang, S.F., Peng, T.C., Zhou, J., Ren, F., Jiang, C.Z., Synthesis and magnetic properties of Maghemite (gamma-Fe(2)O(3)) short-nanotubes. Nanoscale Res. Lett. 5 (2010), 1474–1479.
37. [37] Pfeiffer, C., Rehbock, C., Hühn, D., Carrillo-Carrion, C., de Aberasturi, D.J., Merk, V., Barcikowski, S., Parak, W.J., Interaction of colloidal nanoparticles with their local environment: the (ionic) nanoenvironment around nanoparticles is different from bulk and determines the physico-chemical properties of the nanoparticles. J. R. Soc. Interface, 11, 2014 20130931–20130931.
38. [38] Berg, J.M., Romoser, A., Banerjee, N., Zebda, R., Sayes, C.M., The relationship between pH and zeta potential of ∼30 nm metal oxide nanoparticle suspensions relevant to in vitro toxicological evaluations. Nanotoxicology. 3 (2009), 276–283.
39. [39] Noh, M.W., Lee, D.C., Synthesis and characterization of PS-clay nanocomposite by emulsion polymerization. Polym. Bull. 42 (1999), 619–626.
40. [40] Zheng, J., Siegel, R.W., Toney, C.G., Polymer crystalline structure and morphology changes in nylon-6/ZnO nanocomposites. J. Appl. Polym. Sci. 41 (2003), 1033–1050.
41. [41] Chan, C.M., Wu, J., Cheung, Y.K., Polypropylene/calcium carbonate nanocomposites. Polymer 43 (2002), 2981–2992.
42. 2 separation using mixed matrix membranes (MMMs): an overview on current status and future directions. Prog. Polym. Sci. 39 (2014), 817–861.
43. [43] Mahajan, R., Koros, W.J., Mixed matrix membrane materials with glassy polymers. Part 1. Polym. Eng. Sci. 42 (2002), 1420–1431.
44. [44] Lizundia, E., Sarasua, J.R., D ‘angelo, F., Orlacchio, A., Martino, S., Kenny, J.M., Armentano, I., Biocompatible poly(L-lactide)/MWCNT nanocomposites: morphological characterization, electrical properties, and stem cell interaction. Macromol. Biosci. 12 (2012), 870–881.
45. [45] Le, D., Kongparakul, S., Samart, C., Phanthong, P., Karnjanakom, S., Abudula, A., Guan, G., Preparing hydrophobic nanocellulose-silica film by a facile one-pot method. Carbohyd. Polym. 153 (2016), 266–274.
46. [46] Kamaly, N., Yameen, B., Wu, J., Farokhzad, O.C., Degradable controlled-release polymers and polymeric nanoparticles: mechanisms of controlling drug release. Chem. Rev. 116 (2016), 2602–2663.
47. [47] Correa, C.R., Klein, A., Measurement of permeability, diffusion and solubility coefficients. A testing method. Polym. Test. 9 (1990), 271–277.
48. [48] Silvestre, C., Duraccio, D., Cimmino, S., Food packaging based on polymer nanomaterials. Prog. Polym. Sci. 36 (2011), 1766–1782.
49. [49] Kubacka, A., Fernández-García, M., Colón, G., Advanced nanoarchitectures for solar photocatalytic applications. Chem. Rev. 112 (2012), 1555–1614.
50. [50] Althues, H., Henle, J., Kaskel, S., Functional inorganic nanofillers for transparent polymers. Chem. Soc. Rev. 36 (2007), 1454–1465.
51. [51] Courgneau, C., Domenek, S., Guinault, A., Avérous, L., Ducruet, V., Analysis of the structure-properties relationships of different multiphase systems based on plasticized poly(lactic acid). J. Polym. Environ. 19 (2011), 362–371.
52. [52] Duan, Z., Thomas, N.L., Huang, W., Water vapour permeability of poly(lactic acid) nanocomposites. J. Membr. Sci. 445 (2013), 112–118.
53. [53] Choudalakis, G., Gotsis, A.D., Permeability of polymer/clay nanocomposites: a review. Eur. Polym. J. 45 (2009), 967–984.
54. [54] Tantekin-Ersolmaz, S.B., Atalay-Oral, C., Tatlier, M., Erdem-Senatalar, A., Schoeman, B., Sterte, J., Effect of zeolite particle size on the performance of polymer-zeolite mixed matrix membranes. J. Membr. Sci. 175 (2000), 285–288.
55. [55] Klopffer, M.H., Flaconnèche, B., Transport properties of gases in polymers: bibliographic review. Oil Gas Sci. Technol. 56 (2001), 223–244.
56. [56] Williams, J.L., Hopfenberg, H.B., Stannet, V., Water transport and clustering in poly(vinyl cloride), poly(oxymethylene) and other polymers. Macromol. Sci. Phys. 3 (1969), 711–725.
57. [57] Vieth, W.R., Amini, M.A., Generalized dual sorption theory. Hopfenberg, H.B., (eds.) Permeability of Plastic Films and Coatings to Gases, Vapors and Liquids, 1974, Plenum Press, London, 49–61.
58. [58] Alberton, J., Martelli, S.M., Fakhouri, F.M., Soldi, V., Mechanical and moisture barrier properties of titanium dioxide nanoparticles and halloysite nanotubes reinforced polylactic acid (PLA). IOP Conf. Ser. Mater. Sci. Eng., 64, 2014, 01201.
59. [59] Bao, L., Dorgan, J.R., Knauss, D., Hait, S., Oliveira, N.S., Maruccho, I.M., Gas permeation properties of poly(lactic acid) revisited. J. Membr. Sci. 285 (2006), 166–172.
60. [60] Gonçalves, C.M.B., Tomé, L.C., García, H., Brandao, L., Mendes, A.M., Marrucho, I.M., Effect of natural and synthetic antioxidants incorporation on the gas permeation properties of poly(lactic acid) films. J. Food Eng. 116 (2013), 562–571.
61. [61] Bhunia, K., Dhawan, S., Sablani, S.S., Modeling the oxygen diffusion of nanocomposite-based food packaging films. J. Food Sci. 77 (2012), N29–N38.
62. [62] Krizan, T.D., Coburn, J.C., Blatz, P.S., Structure of amorphous polyamides. Effect on oxygen permeation properties. Koros, W.J., (eds.) Barrier Polymers and Structures, vol. 423, 1990, American Chemical Society, Washington, 111–125.
63. [63] García, A., Eceolaza, S., Iriarte, M., Uriarte, C., Etxeberria, A., Barrier character improvement of an amorphous polyamide (Trogamid) by the addition of a nanoclay. J. Membr. Sci. 301 (2007), 190–199.
64. [64] Eceolaza, S., Iriarte, M., Uriarte, C., Etxeberria, A., Barrier property enhancement of polyamide 6 by blending with a polyhydroxyamino-ether resin. J. Polym. Sci., Part B: Polym. Phys. 47 (2009), 1625–1634.
65. [65] Gonzo, E.E., Parentis, M.L., Gottifredi, J.C., Estimating models for predicting effective permeability of mixed matrix membranes. J. Membr. Sci. 277 (2006), 46–54.