Ultrasonic technology for desiccant regeneration

Ultrasonic Technology for Desiccant Regeneration

Volumn , Issue , 2014, Pages 1-311

  Yao, Ye ^a   Liu, Shiqing ^b  

^a ZHEJIANG NORMAL UNIVERSITY   (China)

^b SHANGHAI JIAO TONG UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

SILICA; SILICA GEL; ULTRASONIC TRANSDUCERS;

LIQUID DESICCANT; ULTRASONIC TECHNOLOGY;

DRIERS (MATERIALS);

EID: 85015308526     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118921616     Document Type: Book

References (239)

1. Conde, M.R. (2004) Properties of aqueous solutions of lithium and calcium chlorides: formulations for use in air conditioning equipment design. International Journal of Thermal Sciences, 43 (4), 367-382.
2. Patek, J. and Klomfar, J. (2006) Solid-liquid phase equilibrium in the systems of LiBr-H2O and LiCl-H2O. Fluid Phase Equilibria, 250 (1-2), 138-149.
3. Yuan, Z. and Herold, K.E. (2005) Thermodynamic properties of aqueous lithium bromide using a multiproperty free energy correlation. International Journal of HVAC&R Research, 11 (3), 377-393.
4. DiGuilio, R.M., Lee, R.J., Jeter, S.M., Teja, A.S. (1990) Properties of Lithium Bromide-Water solutions at High Temperatures and Concentrations - I. Thermal Conductivity, ASHRAE Transactions, 96(Part 1): 702-708.
5. Soleyn, K. (2003) Humidity control: preventing moisture contamination. Chemical Engineering, 110 (11), 50-51.
6. Chen, X.Y., Jiang, Y., Li, Z. and Qu, K.Y. (2005) Field study on independent dehumidification air-conditioning system-i: performance of liquid desiccant dehumidification system. ASHRAE Transactions, 111 (2), 271-276.
7. Chen, X.Y., Jiang, Y., Li, Z. and Qu, K.Y. (2005) Field study on independent dehumidification air-conditioning system ii: performance of the whole system. ASHRAE Transactions, 111 (2), 277-284.
8. Zhang, L.Z. (2006) Energy performance of independent air dehumidification systems with energy recovery measures. Energy, 31 (8-9), 1228-1242.
9. Cowie, M., Liao, X.H. and Radermacher, R. (2003) Performance comparison of waste heat-driven desiccant systems. ASHRAE Transactions, 109 (2), 572-579.
10. Techajunta, S., Chirarattananon, S. and Exell, R.H.B. (1999) Experiments in a solar simulator on solid desiccant regeneration and air dehumidification for air conditioning in a tropical humid climate. Renewable Energy, 17 (4), 549-568.
11. Demakos, P.G. (2009) Improving IAQ with liquid-desiccant dehumidification. Heating/Piping/Air Conditioning HPAC Engineering, 81 (9), 36-42.
12. Chang, K.S., Wang, H.C. and Chung, T.W. (2004) Effect of regeneration conditions on the adsorption dehumidification process in packed silica gel beds. Applied Thermal Engineering, 24 (5-6), 735-742.
13. Czanderna, A.W., Tillman, N.T. and Herdt, G.C. (1995) Polymers as advanced materials for desiccant applications part 3: alkali salts of PSSA and polyAMPSA and copolymers of polyAMPSASS. ASHRAE Transactions, 101 (1), 697-712.
14. Azuara, E., Garcia, H.S. and Beristain, C.I. (1996) Effect of the centrifugal force on osmotic dehydration of potatoes and apples. Food Research International, 29 (2), 195-200.
15. Chakraborty, M. and Kiran, K.T.S. (2002) Pressure swing adsorption: principles, processes and applications. Chemical Engineering World, 37 (9), 98-100.
16. Yamamoto, T. and Yang, C.L. (1998) Plasma desorption and decomposition. Proceedings of the IEEE-IAS Annual Meeting, Saint Louis, MO, October 12-16,1998, pp. 1877-1883.
17. Yamamoto, T., Tanioka, G. and Kuroki, T. (2007) Water vapor desorption and adsorbent regeneration for air conditioning unit using pulsed corona plasma. Journal of Electrostatics, 65 (4), 221-227.
18. Qi, R., Tian, C. and Shao, S. (2010) Experimental investigation on possibility of electro-osmotic regeneration for solid desiccant. Applied Energy, 87 (7), 2266-2272.
19. Qi, R., Tian, C., Shao, S. et al. (2011) Experimental investigation on performance improvement of electroosmotic regeneration for solid desiccant. Applied Energy, 88 (8), 2816-2823.
20. Yao, Y. and Liu, S.Q. (2008) Ultrasonic-a new regeneration technology for dehumidizer. Fourth International Conference on Cryogenics and Refrigeration, Shanghai, China, April 5-9, 2008, pp. 984-990.
21. Breitbach, M., Bathen, D. and Schmidt-Traub, H. (2002) Desorption of a fixed-bed adsorber by ultrasound. Ultrasonics, 40 (5), 679-682.
22. Hamdaoui, O., Naffrechoux, E. and Tifouti, L. (2005) Ultrasonic desorption of p-chlorophenol from granular activated carbon. Chemical Engineering Journal, 106 (2), 153-161.
23. Lim, J. and Okada, M. (2005) Regeneration of granular activated carbon using ultrasound. Ultrasonics Sonochemistry, 12 (4), 277-282.
24. Oualid, H., Rabiaa, D. and Emmanuel, N. (2005) Desorption ofmetal ions from activated carbon in the presence of ultrasound. Industrial and Engineering Chemistry Research, 44 (13), 4737-4744.
25. Juang, R.S., Lin, S.H. and Cheng, C.H. (2006) Liquid-phase adsorption and desorption of phenol onto activated carbons with ultrasound. Ultrasonics Sonochemistry, 13 (3), 251-260.
26. Yao, Y., Zhang, W. and Liu, S.Q. (2009) Feasibility study on power ultrasound for regeneration of silica gel-A potential desiccant used in air-conditioning system. Applied Energy, 86 (11), 2394-2400.
27. Yao, Y., Zhang, W. and Liu, S.Q. (2009) Parametric study of high-intensity ultrasonic for silica gel regeneration. Energy and Fuels, 23 (6), 3150-3158.
28. Yao, Y., Liu, S.Q. and Zhang, W. (2009) Regeneration of silica gel using ultrasonic under low temperatures. Energy & Fuels, 23 (1), 457-463.
29. Yao, Y., Zhang, X., and Guo, Y. (2010) Experimental study on heat transfer enhancement of water-water shell-and-tube heat exchanger assisted by power ultrasonic. The 13th International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, Indiana, July 12-15, 2010, No. 2400 (eds Groll, E.A. and Braun, J.E.).
30. Yao, Y, Zhang, W, Peng, Y et al. (2010) Modeling of silica gel dehydration assisted by power ultrasonic. The 13th International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, Indiana, July 12-15, 2010 (eds Groll, E.A. and Braun, J.E.), p. 2423.
31. Yao, Y. (2010) Using power ultrasound for the regeneration of dehumidizers in desiccant air-conditioning systems: a review of prospective studies and unexplored issues. Renewable and Sustainable Energy Reviews, 14 (7), 1860-1873.
32. Yao, Y., Zhang, W. and He, B. (2011) Investigation on the kinetic models for the regeneration of silica gel by hot air combined with power ultrasonic. Energy Conversion and Management, 52 (10), 3319-3326.
33. Yao, Y., Zhang, W., Yang, K. and Liu, S.Q. (2012) Theoretical model on the heat and mass transfer in silica gel packed beds during the regeneration assisted by high-intensity ultrasound. International Journal of Heat and Mass Transfer, 55 (23-24), 7133-7143.
34. Yao, Y., Yang, K., and Guo, H. (2013) Regeneration of liquid desiccant assisted by ultrasonic atomizing. Cryogenics and Refrigeration Proceedings of ICCR2013, Hangzhou, China, April 6-8, 2013, Paper ID: D2-40.
35. Yao, Y., Lian, Z.W., and Liu, S.Q. (2007) Desiccant air-conditioning system with ultrasonic-assisted regeneration. China Patent 200510110441.8, Apr. 10 2007.
36. Yao, Y., Liu, S.Q., and Chen, J. (2009) Shell-and-tube heat exchanger enhanced by ultrasound. China Patent 200710173262.8, May 15 2009.
37. Yao, Y., Liu, S.Q., and Chen, J. (2009) Rotary desiccant dehumidifier assisted by high-intensity ultrasound. China Patent 200710173264.7, July 20 2009.
38. Yao, Y., Liu, S.Q., and Chen, J. (2009) Evaporative cooling air-conditioning system based on ultrasonic technology. China Patent 200710173263.2, July 25 2009.
39. Yao, Y., Liu, S.Q., and Chen J. (2012) Desiccant wheel air-conditioning system using power ultrasound for desiccant regeneration and heat pipe for heat recovery. China Patent 201110209559.1, Oct. 20 2012.
40. Yao, Y., Liu, S.Q., and Chen, J (2012) A high-power ultrasonic transducer combined with heat pipe cooling system. China Patent 201110226180.1, Sept. 20 2012.
41. Yao, Y., Liu, S.Q., and Chen J. (2013) Ultrasonic-assisted regenerator for the liquid desiccant. China Patent 201110224732.5, Nov. 05 2013.
42. Zhang, W., Yao, Y. and Wang, R. (2010) Influence of ultrasonic frequency on the regeneration of silica gel by applying high-intensity ultrasound. Applied Thermal Engineering, 30 (14), 2081-2087.
43. Zhang, W., Yao, Y., He, B. and Wang, R. (2011) Specific energy consumption of silica gel regeneration with high-intensity ultrasound. Applied Energy, 88 (6), 2146-2156.
44. Yang, K. and Yao, Y. (2012) Effect of applying ultrasonic on the regeneration of silica gel under different air conditions. International Journal of Thermal Sciences, 61 (11), 67-78.
45. Yang, K. and Yao, Y. (2013) Investigation on applying ultrasonic to the regeneration of a new honeycomb desiccant. International Journal of Thermal Sciences, 72 (10), 159-171.
46. Yang, K., Yao, Y., and He B. (2013) Quantitative study on contributions of highintensity ultrasound to the enhancement of regeneration of silica gel. Cryogenics and Refrigeration Proceedings of ICCR2013, Hangzhou, China, April 6-8, 2013, Paper ID: B3-40.
47. Liu S.Q., Lin S. Effects of geometry dimensions of the tool on the ultrasonic torsional vibration system. Applied Acoustics, 2004, 23(6): 16-19, (in Chinese).
48. Liu S.Q., Lin S. Study on the local resonance in torsional ultrasonic vibration systems. Applied Acoustics, 2004, 23(2): 11-14, (in Chinese).
49. Liu S.Q., Lin S. Study on the equivalent circuit of uniform cross section acoustic waveguide. Journal of Southwest China Normal University, 2005, 45(6): 648-651, (Natural Science, in Chinese).
50. Liu S.Q., Lin S, Guo J. Study on the radial vibration and equivalent circuit of thin elastic annular plate with tapered thickness along radial direction. Piezoelectric and Acoustooptics, 2006, 28(3): 347-349, (in Chinese).
51. Liu S.Q., Qiu Y. Ultrasonic torsional vibration and equivalent circuit of thin annular resonator. Journal of Zhejiang Normal University, 2007, 30(3): 277-281, (Natural Science, in Chinese).
52. Liu S.Q., Yao Y. Radial vibration characteristics of composite pipe power piezoelectric ultrasonic transducer. Journal of Mechanical Engineering, 2008, 44(10): 239-244, (in Chinese).
53. Liu S.Q., Lin S. Radial vibration frequency equation of composite disc piezoelectric ultrasonic transducer. Journal of Mechanical Engineering, 2008, 44(9): 65-69, (in Chinese).
54. Liu, S.Q. and Lin, S. (2009) The analysis of the electro-mechanical model of the cylindrical radial composite piezoelectric ceramic transducer. Sensors and Actuators A, 155 (2), 175-180.
55. Liu S.Q., Yao Y, Lin S. Radial-torional vibration mode of disc-type piezoelectric transducer. Journal of Mechanical Engineering, (in Chinese), 2009, 45(6): 176-180.
56. Liu S.Q., Yao Y, Lin S. Study on the conversion mechanism of radial torsional vibration mode of piezoelectric hybrid disk with multiple diagonal slots. Journal of Shanghai Jiaotong University, 2009, 43(8): 1312-1316, (Natural Science, in Chinese).
57. Liu S.Q., Weizhong P. Load characteristics of composite tubular piezoelectric ultrasonic transducer. Journal of Zhejiang Normal University, 2009, 32(4): 421-425, (Natural Science, in Chinese).
58. Liu S.Q., Su C, Yao Y. Radial vibration characteristics of an annular ultrasonic concentrator with n-th power thickness variations. Journal of Shanghai Jiaotong University), 2011, 45 (6): 940-944, (Natural Science, in Chinese.
59. Liu, S.Q. and Yao, Y. (2010) A type of piezoelectric ultrasonic transducer. China Patent 200710071087.1.
60. Liu, S.Q., Zhang, Z., and Fang, J. (2011) A type of composite tubular ultrasonic transducer. China Patent 200910102269.X.
61. Liu, S.Q., Zhang, Z., and Fang J. (2011) A type of tubular piezoelectric ultrasonic transducer. China Patent 200910102269.X.
62. Liu, S.Q., Zhang, Z., and Fang, J. (2011) A type of cylindrical ultrasonic transducer. China Patent 200920196021.X.
63. Alam, K.C.A., Saha, B.B., Kang, Y.T. et al. (2000) Heat exchanger design effect on the system performance of silica gel adsorption refrigeration systems. International Journal of Heat and Mass Transfer, 43 (24), 4419-4431.
64. Liu, Y.L., Wang, R.Z. and Xia, Z.Z. (2005) Experimental performance of a silica gel-water adsorption chiller. Applied Thermal Engineering, 25 (2-3), 359-375.
65. Lu, Z.S., Wang, R.Z. and Xia, Z.Z. (2013) Experimental analysis of an adsorption air conditioning with micro-porous silica gel-water. Applied Thermal Engineering, 50 (1), 1015-1020.
66. Wu, J.Y. and Li, S. (2009) Study on cyclic characteristics of silica gel-water adsorption cooling system driven by variable heat source. Energy, 34 (11), 1955-1962.
67. Enteria, N., Yoshino, H., Mochida, A. et al. (2012) Performance of solar-desiccant cooling system with Silica-Gel (SiO2) and titanium dioxide (TiO2) desiccant wheel applied in East Asian climates. Solar Energy, 86 (5), 1261-1279.
68. Hougen, O.A. andMarshall, W.R. (1947) Adsorption from a fluid stream flowing through a stationary granular bed. Chemical Engineering Progress, 43 (4), 197-208.
69. Aristov, Y.I., Tokarev, M.M. and Gordeeva, L.G. (1996) Selective water sorbents for multiple applications, 1. CaCl2 confined in mesopores of silica gel: sorption properties. Reaction Kinetics and Catalysis Letters, 59 (2), 325-333.
70. Aristov, Y.I., Tokarev, M.M. and Restuccia, G. (1996) Selective water sorbents for multiple applications, 2. CaCl2 confined in micropores of silica gel: sorption properties. Reaction Kinetics and Catalysis Letters, 59 (2), 335-342.
71. Aristov, Y.I., Tokarev, M.M., Gordeeva, L.G. et al. (1999) New composite sorbents for sorlordriven technology of fresh water production from atmosphere. Solar Energy, 66 (2), 165-168.
72. Aristov, Y.I., Restucia, G., Tokarew, M.M. et al. (2000) Selective water sorbents for multiple applications. 11. CaCl2 confined to expanded vermiculite. Reaction Kinetics and Catalysis Letters, 71 (2), 377-384.
73. Tokarev, M.M. and Aristov, Y.I. (1997) Selective water sorbents for multiple applications, 4. CaCl2 confined in silica gel pores: sorption / desorption kinetics. Reaction Kinetics and Catalysis Letters, 62 (1), 143-150.
74. Thoruwa, T.F.N., Johnstone, C.M., Grant, A.D. and Smith, J.E. (2000) Novel, low cost CaCl2 based desiccants for solar crop drying applications. Renewable Energy, 19 (5), 513-520.
75. Liu, Y.F. andWang, R.Z. (2003) Pore structure of new composite SiO2.xH2O.yCaCl2 with uptake of water air. Science in China, Serials E, 46 (5), 551-559.
76. Jia, C.X., Dai, Y.J., Wu, J.Y. and Wang, R.Z. (2007) Use of compound desiccant to develop high performance desiccant cooling system. International Journal of Refrigeration, 30 (2), 345-353.
77. Misha, S., Mat, S., Ruslan, M.H. and Sopian, K. (2012) Review of solid/liquid desiccant in the drying applications and its regeneration methods. Renewable and Sustainable Energy Reviews, 16 (7), 4686-4707.
78. Jeong, J., Yamaguchi, S., Saito, K. and Kawai, S. (2011) Performance analysis of desiccant dehumidification systems driven by low-grade heat source. International Journal of Refrigeration, 34 (4), 928-945.
79. Thoruwa, T.F.N., Smith, J.E., Grant, A.D., and Johnstone, C.M. (1996) Development in solar drying using forced ventilation and solar regenerated desiccant materials. WREC-IV World Renewable Energy Congress, No. 4, Denver, Colorado, ETATS-UNIS (15/06/1996), 1996, Vol. 9(1-4), pp. 686-689.
80. Thoruwa, T.F.N., Grant, A.D., Smith, J.E. and Johnstone, C.M. (1998) A solar-regenerated desiccant dehumidifier for the aeration of stored grain in the humid tropics. Journal of Agricultural Engineering Research, 71 (4), 257-262.
81. Shanmugam, V. and Natarajan, E. (2006) Experimental investigation of forced convection and desiccant integrated solar dryer. Renewable Energy, 31 (8), 1239-1251.
82. Nagaya, K., Li, Y., Jin, Z. et al. (2006) Low-temperature desiccant-based food drying system with airflow and temperature control. Journal of Food Engineering, 75 (1), 71-77.
83. Madhiyanon, T., Adirekrut, S., Sathiruangsak, P. and Soponron-Narit, S. (2007) Integration of a rotary desiccant wheel into a hot-air drying system: drying performance and product quality studies. Chemical Engineering and Processing, 46 (4), 282-290.
84. Gandhidasan, P.A. (2004) Simplified model for air dehumidification with liquid desiccant. Solar Energy, 76 (4), 409-416.
85. Rane, M.V., Reddy, S.V.K. and Easow, R.R. (2005) Energy efficient liquid desiccant-based dryer. Applied Thermal Engineering, 25 (5-6), 769-781.
86. Barati, A., Kokabi, M. and Famili, N. (2003) Modeling of liquid desiccant drying method for gelcast ceramic parts. Ceramic International, 29 (2), 199-207.
87. Barati, A., Kokabi, M. and Famili, N. (2003) Drying of gelcast ceramic parts via the liquid desiccant method. Journal of the European Ceramic Society, 23 (13), 2265-2272.
88. Zheng, Z., Zhou, D. andGong, S. (2008) Studies of drying and sintering characteristics of gelcast BaTiO3-based ceramic parts. Ceramics International, 34 (3), 551-555.
89. Trunec, M. (2011) Osmotic drying of gelcast bodies in liquid desiccant. Journal of the European Ceramic Society, 31 (14), 2519-2524.
90. Mandegari, M. and Pahlavanzadeh, H. (2009) Introduction of a new definition for effectiveness of desiccant wheels. Energy, 34 (6), 797-803.
91. Bassuoni, M.M. (2011) An experimental study of structured packing dehumidifier / regenerator operating with liquid desiccant. Energy, 36 (5), 2628-2638.
92. Zaltash, A., Petrov, A.Y., Rizy, D.T. et al. (2006) Laboratory R&D on integrated energy systems (IES). Applied Thermal Engineering, 26 (1), 28-35.
93. Lu, S.M., Shyu, R.J., Yan, W.J. and Chung, T.W. (1995) Development and experimental validation of two novel solar desiccant-dehumidification-regeneration systems. Energy, 20 (8), 751-757.
94. Xiong, Z.Q., Dai, Y.J. and Wang, R.Z. (2009) Investigation on a two-stage solar liquid-desiccant (LiBr) dehumidification system assisted by CaCl2 solution. Applied Thermal Engineering, 29 (5-6), 1209-1215.
95. Alosaimy, A.S. and Hamed, A.M. (2011) Theoretical and experimental investigation on the application of solar water heater coupled with air humidifier for regeneration of liquid desiccant. Energy, 36 (7), 3992-4001.
96. Wang, W.C., Calay, R.K. and Chen, Y.K. (2011) Experimental study of an energy efficient hybrid system for surface drying. Applied Thermal Engineering, 31 (4), 425-431.
97. Ania, C.O., Menendez, J.A., Parra, J.B. and Pis, J.J. (2004) Microwave-induced regeneration of activated carbons polluted with phenol: a comparison with conventional thermal regeneration. Carbon, 42 (7), 1377-1381.
98. Liu, X., Gang, L. and Han, W. (2007) Granular activated carbon adsorption and microwave regeneration for the treatment of 2,4,5-trichlorobiphenyl in simulated soil-washing solution. Journal of Hazardous Materials, 147 (3), 746-751.
99. Kim, K.J. and Ahn, H.G. (2008) A study on adsorption characteristics of benzene over activated carbons coated with insulating materials and desorption by microwave irradiation. Jour nal of Korean Industrial and Engineering Chemistry, 19 (4), 445-451.
100. Polaerta, I., Estel, L., Huygheb, R. and Thomasb, M. (2010) Adsorbents regeneration under microwave irradiation for dehydration and volatile organic compounds gas treatment. Chemical Engineering Journal, 162 (3), 941-948.
101. Mitsuhiro, K., Takuya, H., Satoshi, Y. et al. (2011) Water desorption behavior of desiccant rotor under microwave irradiation. Applied Thermal Engineering, 31 (8-9), 1482-1486.
102. Mitsuhiro, K., Takuya, H., Satoshi, Y. and Hitoki, M. (2013) Regeneration characteristics of desiccant rotor with microwave and hot-air heating. Applied Thermal Engineering, 50 (2), 1576-1581.
103. Rautenbach, R. and Albrecht, R. (1989) Membrane Processes, John Wiley & Sons, Inc., New York.
104. Al-Farayedhi, A.A., Gandhidasan, P. and Ahmed, S.Y. (1999) Regeneration of liquid desiccants using membrane technology. Energy Conversion & Management, 40 (13), 1405-1411.
105. Al-Sulaiman, F.A., Gandhidasan, P. and Zubair, S.M. (2007) Liquid desiccant based two-stage evaporative cooling system using reverse osmosis (RO) process for regeneration. Applied Thermal Engineering, 27 (14-15), 2449-2454.
106. Alexander, S.R., Ananda, K.N., Srinivas, G. and Thomas, F.F. (2011) Modeling of a flat plate membranedistillation system for liquid desiccant regeneration in air-conditioning applications. International Journal of Heat and Mass Transfer, 54 (15-16), 3650-3660.
107. Yao, S.H., Hertzog, D.E. and Zeng, S.L. (2003) Porous glass electro osmotic pumps: design and experiments. Journal of Colloid Interface Science, 268 (1), 143-153.
108. Kirby, B.J. and Hasselbrink, E.F. (2004) Zeta potential of micro fluidic substrates: 1. Theory, experimental techniques, and effects on separations. Electrophoresis, 25 (1), 187-202.
109. Santiago, J.G. (2001) Electroosmotic flows in microchannels with finite inertial and pressure forces. Analytical Chemistry, 73 (10), 2353-2365.
110. Li, B., Lin, Q.Y. and Yan, Y.Y. (2012) Development of solid desiccant dehumidification using electro-osmosis regeneration method for HVAC application. Building and Environment, 48 (1), 128-134.
111. Ogata, A., Mizuno, K., Ito, D. et al. (2001) Removal of dilute benzene using zeolite-hybrid plasma reactor. IEEE Transactions on Industry Applications, 37 (4), 959-964.
112. Malik, M.A., Kolb, J.F., Sun, Y. and Schoenbach, K.H. (2011) Comparative study of NO removal in surface-plasma and volume-plasma reactors based on pulsed corona discharges. Journal of Hazardous Materials, 197 (12), 220-228.
113. Song, Y.H., Kim, S.J., Choi, K.I. and Yamamoto, T. (2002) Effects of adsorption and temperature on a nonthermal plasma process for removing VOCs. Journal of Electrostatics, 55 (4), 189-201.
114. Wikipedia http://en.wikipedia.org/wiki/Ultrasound (accessed 9 April 2014).
115. Kudra T, Mujumdar AS in Advanced Drying Technologies, Chapter 13 S. Drying (Ed.) 2nd edn Bosa Roca, FL: CRC Press, Taylor & Francis, 2009.
116. Yiquan, Y. (1992) Ultrasonic Transducer, Nanjing University Press, Najing.
117. Fridman, V.M. (1967) Ultrasonic Chemical Equipment, Mashinostroyennie, Moscow.
118. Boucher, R.M.G. (1959) Drying by airborne ultrasonics. Ultrasonic News, 2, 8-16.
119. Borisov, Y.Y. andGynkina, N.M. (1962) On acoustic drying in a standing soundwave. Soviet Physics Acoustics, 8 (1), 129-131.
120. Zayas, Y. and Pento, V. (1975) Drying of thermally labile solutions in acoustic field. Myasnaya Industriya, 6 (1), 31-33.
121. Bartolome, L.G., Hoff, J.E. and Purdy, K.R. (1969) Effect of resonant acoustic vibrations on drying rates of potato cylinders. Food Technology, 23, 47-50.
122. Muralidhara, H.S. and Ensminger, D. (1986) Acoustic drying of green rice. Drying Technology, 4 (1), 137-143.
123. Greguss, P. (1963) The mechanism and possible applications of drying by ultrasonic irradiation. Ultrasonics, 1, 83-86.
124. Muralidhara, H.S., Chauhan, S.P., Senapati, N. et al. (1988) Electro-acoustic dewatering (EAD): a novel approach for food processing, and recovery. Separation Science and Technology, 23 (12, 13), 2143-2158.
125. Suslick, K.S. (1988) Ultrasound: Its Chemical, Physical and Biological Effects, VCH Publishers, New York.
126. Fairbanks, H.V. and Chen, W.I. (1969) Influence of ultrasonic upon liquid flow through porous media. Ultrasonics, 7 (3), 195-196.
127. Kuznetsov, V.V. and Subbotina, N.I. (1965) An effect of ultrasound on the diffusion of electrolytic hydrogen through the ion membrane. Elektrokhimia, 1 (9), 1096-1098.
128. Kardashev, G.A. (1990) Physical Methods of Process Intensification in Chemical Technologies, Khimiya, Moscow.
129. Strumillo, C. and Kudra, T. (1986) Drying: Principles, Applications and Design, Gordon and Breach Science Publishers, New York.
130. Moy, J.H. and Dimarco, G.R. (1970) Exploring airborne sound in a non-vacuum freeze drying process. Journal of Food Science, 35 (10), 811-817.
131. Ensminger, D.E. (1988) Ultrasonics: Fundamentals, Technology, Applications, Marcel Dekker, Inc., New York and Basel.
132. Gallego-Juarez, J.A., Rodriguez-Corral, G., Galvez-Moraleda, J.C. and Yang, T.S. (1999) A new high-intensity ultrasonic technology for food dehydration. Drying Technology, 17 (3), 597-608.
133. Kaeger, J. and Ruthven, D.M. (1992) Diffusion in Zeolites and Other Microporous Solids, John Wiley & Sons, Inc., New York.
134. Edwards, D.K., Denny, V.E. and Mills, A.F. (1979) Transfer Processes, 2nd edn, Hemisphere/McGraw-Hill Book Company, Inc., New York.
135. Pesaran, A.A. (1983) Moisture transport in silica gel particle beds. PhD Dissertation. School of Engineering and Applied Sciences, University of California, Los Angeles.
136. Roque-Malherbe, R.M.A. (2007) Adsorption and Diffusion in Nanoporous Materials, CRC Press, Taylor & Francis Group, Boca Raton, FL.
137. Sladek, K.J., Gilliland, E.R. and Baddour, R.F. (1974) Diffusion on surface. II. Correlation of diffusivities of physically and chemically adsorbed species. Industrial & Engineering Chemistry Fundamentals, 13 (2), 100-105.
138. Pesaran, A.A. and Mills, A.F. (1987) Moisture transport in silica gel packed beds - II. Experimental study. International Journal of Heat and Mass Transfer, 30 (6), 1051-1060.
139. Muralidhara, H.S. and Ensminger, D. (1986) Acoustic drying of green rice. Drying Technology, 4 (1), 137-143.
140. Kudra, T. and Mujurndar, A.S. (2009) Advanced drying technologies: Chapter 13, in Sonic Drying, 2nd edn, CRC Press, Taylor & Francis, Oxford.
141. Lee, C.P. andWang, T.G. (1990) Outer acoustic streaming. Journal of the Acoustical Society of America, 88 (5), 2367-2375.
142. Hyun, S. and Lee, D.R. (2005) Byoung-Gook Loh. Investigation of convective heat transfer augmentation using acoustic streaming generated by ultrasonic vibrations. International Journal of Heat and Mass Transfer, 48 (3-4), 703-718.
143. Crank, J. (1979) The Mathematics of Diffusion, 2nd edn, Clarendon Press, Oxford.
144. Nuh, D.N. and Brinkworth, B.J. (1997) Novel thin-layer model for crop drying. Transactions of the American Society of Agricultural Engineers, 40 (3), 659-669.
145. Panades, G., Castro, D., Chiralt, A. et al. (2008) Mass transfer mechanisms occurring in osmotic dehydration of guava. Journal of Food Engineering, 87 (3), 386-390.
146. Lu, H., Gong, X., Wang, C. et al. (2008) Effect of vibration onwater transport through carbon nanotubes. Chinese Physics Letter, 25 (3), 1145-1148.
147. Rege, S.U., Yang, R.T. and Cain, C.A. (1998) Desorption by ultrasound: phenol on activated carbon and polymeric resin. AICHE Journal, 44 (7), 1519-1528.
148. Midilli, A. and Kucuk, H. (2003) Mathematical modeling of thin layer drying of pistachio by using solar energy. Energy Conversion and Management, 44 (7), 1111-1122.
149. Sogi, D.S., Shivhare, U.S., Garg, S.K. and Bawa, A.S. (2003)Water sorption isotherm and drying characteristics of tomato seeds. Biosystems Engineering, 84 (3), 297-301.
150. Marabi, A., Dilak, C., Shah, J. and Saguy, L.S. (2004) Kinetics of solids leaching during rehydration of particulate dry vegetables. Journal of Food Science, 69 (3), 91-96.
151. Akpinar, E.K., Bicer, Y. and Cetinkaya, F. (2006) Modeling of thin layer drying of parsley leaves in a convective dryer and under open sun. Journal of Food Engineering, 75 (3), 308-315.
152. Mcminn, W.A.M. (2006) Thin-layer modeling of the convective, microwave, microwave-convective and microwave-vacuum drying of lactose powder. Journal of Food Engineering, 72 (1), 113-123.
153. Sacilik, K. (2007) Effect of drying methods on thin-layer drying characteristics of hull-less seed pumpkin. Journal of Food Engineering, 79 (1), 23-30.
154. Khazaei, J. and Daneshmandi, S. (2007) Modeling of thin-layer drying kinetics of sesame seeds: mathematical and neural networks modeling. International Agrophysics, 21 (4), 335-348.
155. Kocijan, J., Girard, A., Banko, B. and Murray-Smith, R. (2005) Dynamic systems identification with Gaussian processes. Mathematical and Computer Modelling of Dynamical Systems, 11 (4), 411-424.
156. Pedreno-Molina, J.L., Monzo-Cabrera, J., Toledo-Moreo, A. and Sanchez-Hernandez, D. (2005) A novel predictive architecture for microwave-assisted drying processes based on neural network. International Communications in Heat and Mass Transfer, 32 (8), 1026-1033.
157. Crighton, D.E., Dowling, A.P., Williams, J.E.F. et al. (1992) Modern Methods in Analytical Acoustics, Springer, New York.
158. Kumar, T.S., Patle, M.K. and Sujith, R.I. (2007) Characteristics of acoustic standing waves in packed bed columns. AICHE Journal, 53 (2), 297-304.
159. Morse, R.W. (1952) Acoustic propagation in granular media. The Journal of the Acoustical Society of America, 24 (6), 696-700.
160. Kinsler, L.E., Frey, A.R., Coppens, A.B. and Sanders, J.V. (1999) Fundamentals of Acoustics, 4th edn, John Wiley & Sons, Inc., New York.
161. Zwikker, C. and Kosten, C.W. (1949) Sound Absorbing Materials, Elsevier Publishing Company, New York.
162. Biot, M.A. (1956) Theory of propagation of elastic waves in a fluid: saturated porous solid. II. Higher frequency range. The Journal of the Acoustical Society of America, 28 (2), 179-191.
163. Buck, A.L. (1981) New equations for computing vapor pressure and enhancement factor. Journal of Applied Meteorology, 20 (12), 1527-1532.
164. Xu L.H., Yan J. Fundamental of Thermal Engineering and Industrial. Kiln and Metallurgical Industry Press, Beijing, 2006 (in Chinese).
165. Lin, S. and Zhang, F. (2000) Measurement of ultrasonic power and electro-acoustic efficiency of high power transducers. Ultrasonics, 37 (8), 549-554.
166. Awad, M.M., Ramzy, A., Hamed, A.M. and Bekheit, M.M. (2008) Theoretical and experimental investigation on the radial flow desiccant dehumidification bed. Applied Thermal Engineering, 28 (1), 75-85.
167. Chang, K.S., Wang, H.C. and Chung, T.W. (2004) Effect of regeneration conditions on the adsorption dehumidification process in packed silica gel beds. Applied Thermal Engineering, 24 (5-6), 735-742.
168. Herrera, C.A., Levy, E.K. and Ochs, J. (2002) Characteristics of acoustic standing waves in fluidized beds. AICHE Journal, 48 (3), 503-513.
169. Jakevicius, L. and Demcenko, A. (2008) Ultrasound attenuation dependence on air temperature in closed chambers. Ultrasound, 63 (1), 18-22.
170. Sujith, R. and Zinn, B. (2000) A theoretical investigation of enhancement of mass transfer from a packed bed using acoustic oscillations. The Canadian Journal of Chemical Engineering, 78 (6), 1145-1150.
171. García-Pérez J.V., Rossello C., Carcel J.A., Fuente S de la, Mule A. Effect of air temperature on convective drying assisted by high power ultrasound. Defect and Diffusion Forum, 2006, 258-260 (10): 563-574.
172. Sharma, G. and Prasad, S. (2006) Specific energy consumption in microwave drying of garlic cloves. Energy, 31 (12), 1921-1926.
173. Baker, C. and Mckenzie, K. (2005) Energy consumption of industrial spray dryers. Drying Technology, 23 (1), 365-386.
174. Yang, K. and Yao, Y. (2013) Investigation on the performance of applying ultrasonic to the regeneration of a new honeycomb desiccant material. International Journal of Thermal Sciences, 72 (10), 159-171.
175. Zhang, G., Zhang, Y.F. and Fang, L. (2008) Theoretical study on simultaneous water and VOCs adsorption and desorption in a silica gel rotor. Indoor Air, 18 (1), 37-43.
176. Holman, J.P. (2005) Heat Transfer, Mechanical Industry Press, Beijing.
177. Puig, A., Perez-Munuera, I., Carcel, J.A. et al. (2008) Theoretical and experimental investigation on the radial flow desiccant dehumidification bed. Applied Thermal Engineering, 28 (1), 75-85.
178. Lof, G.O.G. (1955) Cooling with solar energy. World Symposium on Applied Solar Energy, Phoenix, AZ, 1955, pp. 171-189.
179. Uemura, T. and Hasaba, S. (1964) Studies on the lithium bromide-water absorption refrigerating machines. Technological Report of Kansai University, 6, 31-55.
180. Mcneely, L.A. (1979) Thermodynamic properties of aqueous solutions of lithium bromide. ASHRAE Transactions, 85 (Part 2), 413-434.
181. Patil, K.R., Tripathi, A.D. and Pathak, G. (1990) Thermodynamic properties of aqueous electrolyte solutions. 1. Vapor pressure of aqueous solutions of LiCl, LiBr and LiI. Journal of Chemical and Engineering Data, 35 (2), 166-168.
182. Chua, H.T., Toh, H.K., Malek, A. et al. (2000) Improved thermodynamic property fields of LiBr-H2O solution. International Journal of Refrigeration, 23 (6), 412-429.
183. Yuan, Z. and Herold, K.E. (2005) Thermodynamic properties of aqueous lithium bromide using a multi-property free energy correlation. International Journal of HVAC&R Research, 11 (3), 377-393.
184. Conde, M.R. (2004) Properties of aqueous solutions of lithium and calcium chlorides: formulations for use in air conditioning equipment design. International Journal of Thermal Sciences, 43 (4), 367-382.
185. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (2003) ASHRAE Handbook of Fundamentals, ASHRAE, Atlanta.
186. Ertas, A., Anderson, E.E. and Kiris, I. (1992) Properties of a new liquid desiccant solution lithium chloride and calthium chloride mixture. Solar Energy, 49 (3), 205-212.
187. (1976) The Editorial Team of Ship AuxiliaryMechanical and Electrical Equipment. Domestic Lithium Bromide Aqueous Solution Property Graph Set (In Chinese).
188. Patek, J. and Klomfar, J. (2006) Solid-liquid phase equilibrium in the systems of LiBr-H2O and LiCl-H2O. Fluid Phase Equilibria, 250 (1-2), 138-149.
189. Lower, H. (1960) Thermodynamische und physlkalische eigenschaften der wassrigen lithium bromide-losung. PhD thesis. Technischen Hochschule Karlsruhe.
190. Feuerecker, G., Scharfe, J., Greiter I. et al. (1994) Measurement of thermo physical properties of aqueous LiBr-solutions at high temperature and concentrations. Proceedings of the International Absorption Heat Pump Conference, New Orleans, LA, AES, 1994, vol. 31, pp. 493-499.
191. Wimby, J.M. and Berntsson, T.S. (1994) Viscosity and density of aqueous solutions of LiBr, LiCl, ZnBr2, CaCl2, and LiNO3. 1. Single salt solutions. Journal of Chemical and Engineering Data, 39 (1), 68-72.
192. Zhao, Y. and Shi, H.M. (2001) The choice of the desiccant solutions in the liquid desiccant air conditioning system. Journal of Engineering Thermophysics, 22 (Supplementary Issue), 165-168.
193. Studak, J.W. and Perterson, J.L. (1988) A preliminary evaluation of alternative liquid desiccants for a hybrid desiccant air conditioner. Proceedings of the Fifth Annual Symposium on Improving Building Energy Efficiency in Hot and Humid Climates, Houston, TX, 1988, vols. 13-14, pp. 155-159.
194. Yi, X.Q. (2009) Study on the characteristics of conventional liquid desiccants. Master dissertation. Tsinghua University.
195. Ahmed, S.Y. and Gandhidasan, P. (1998) Thermodynamic analysis of liquid desiccant. Solar Energy, 62 (1), 11-18.
196. Jain, S., Dhar, P.L. and Kaushik, S.C. (1999) Experimental studies on the dehumidifier and regenerator of a liquid desiccant cooling system. Applied Thermal Engineering, 20 (3), 253-267.
197. Scalabrin, G. and Scaltri, G. (1990) A liquid sorption-desorption system for air conditioning with heat at lower temperature. ASME, Journal of Solar Energy Engineering, 112 (1), 70-75.
198. Chung, T.W., Lai, C. and Wu, H. (1999) Analysis of mass transfer performance in an air stripping tower. Separation Science and Technology, 34 (14), 2837-2851.
199. Factor, H.M. and Grossman, G. (1980) A packed bed dehumidifier/regenerator for solar air conditioning with liquid desiccants. Solar Energy, 24 (5), 541-550.
200. Etras, A., Gandhidsan, P., Kiris, I. and Anderson, E.E. (1994) Experimental study on the performance of a regeneration tower for various climatic conditions. Solar Energy, 53 (1), 125-130.
201. Potniz, S.V. and Lenz, T.G. (1996) Dimensionless mass transfer correlations for packed-bed liquid-desiccant contactors. Industrial and Engineering Chemistry Research, 35 (11), 4185-4193.
202. Martin, V. and Goswami, D.Y. (1999) Heat and mass transfer in packed bed liquid desiccant regenerators e an experimental investigation. Transactions of the ASME-Journal of Solar Energy Engineering, 121 (3), 162-170.
203. Oberg, V.M. and Goswami, D.Y. (2000) Effectiveness of heat and mass transfer processes in packed bed liquid desiccant dehumidifier/regenerator. HVAC & Research, 6 (1), 22-39.
204. Fumo, N. and Goswami, D.Y. (2002) Study of an aqueous lithium chloride desiccant system: air dehumidification and desiccant regeneration. Solar Energy, 72 (4), 351-361.
205. Gandhidsan, P. (2005) Quick performance predictions of liquid desiccant regeneration in a packed bed. Solar Energy, 79 (1), 47-55.
206. Elsarrag, E. (2006) Performance study on a structured packed liquid desiccant regenerator. Solar Energy, 80 (12), 1624-1631.
207. Longo, G.A. and Gasparella, A. (2009) Experimental analysis on desiccant regeneration in a packed column with structured and random packing. Solar Energy, 83 (4), 511-521.
208. Yin, Y. and Zhang, X. (2010) Comparative study on internally heated and adiabatic regenerators in liquid desiccant air conditioning system. Building and Environment, 45 (8), 1799-1807.
209. Raja, S. and Valsaraj, K.T. (2004) Uptake of aromatic hydrocarbon vapors (Benzene and Phenanthrene) at the air-water interface of micron-size water droplets. Journal of the Air and Waste Management Association, 54 (12), 1550-1559.
210. Chen, X.D. (2005) Lower bound estimates of the mass transfer coefficient from an evaporating liquid droplet - the effect of high interfacial vapor velocity. Drying Technology, 23 (1), 59-69.
211. Davis, E.J. and Schweiger, G. (2002) The Airborne Microparticle, Springer, New York.
212. Newbold, F.R. and Amundson, N.R. (1973) A model for evaporation of a multicomponent droplet. AIChE Journal, 19 (1), 22-30.
213. Jennings, S. (1988) The mean free path in air. Journal of Aerosol Science, 19 (2), 159-166.
214. Seinfeld, J.H. and Pandis, S.N. (1998) Atmospheric Chemistry and Physics: From Air Pollution to Climate Change, John Wiley & Sons, Inc., New York.
215. Hopkins, R.J. and Reid, J.P. (2006) A comparative study of the mass and heat transfer dynamics of evaporating ethanol/water, methanol/water, and 1-propanol/water aerosol droplets. Journal of Physical Chemistry B, 110 (7), 3239-3249.
216. Yasuda, K., Bando, Y., Yamaguchi, S. et al. (2005) Analysis of concentration characteristics in ultrasonic atomization by droplet diameter distribution. Ultrasonics Sonochemistry, 12 (1), 37-41.
217. Su, F. (2002) Experiment and theory research of ultrasonic atomization. Doctor dissertation, Tianjin. Hebei University of Technology.
218. Chen, C. and Evans, L.B. (1986) A local composition model for the excess Gibbs energy of aqueous electrolyte systems. AIChE Journal, 32 (3), 444-454.
219. Hsu, H.L., Wu, Y.C. and Lee, L.S. (2003) Vapor pressure of aqueous solution with mixed salts of NaCl + KBr and NaBr + KCl. Journal of Chemical and Engineering Data, 48 (3), 514-518.
220. Neilson, L.E. (1978) Predicting the Properties of Mixtures Predicting the Properties of Mixtures, Mixing Rules in Science and Engineering, Marcel Dekker, Inc., New York.
221. Pitzer, K.S. (1991) Activity Coefficient in Electrolyte Solution, 2nd edn, CRC Press, Boca Raton, FL.
222. Chen, C.C., Britt, H.I., Boston, J.F. and Evans, L.B. (1982) Local composition model for excess Gibbs energy of electrolyte systems. Part 1: single solvent, single completely dissociated electrolyte systems. AIChE Journal, 28 (4), 588-596.
223. Seinfeld, J.H. (1986) Atmospheric Chemistry and Physics of Air Pollution, JohnWiley & Sons, Inc., New York.
224. Treybal, R. (1980) Mass Transfer Operations, McGraw-Hill, New York.
225. Gandhidasan, P. (1986) Calculation of heat and mass transfer coefficients in a packed tower operating with a desiccant-air contact system. Journal of Solar Energy Engineering, 108 (2), 123-128.
226. Incropera, F.P., Dewitt, D.P., Bergman, T.L. and Lavine, A.S. (2007) Fundamentals of Heat and Mass Transfer, 6th edn, John Willey & Sons, Inc., Hoboken, NJ.
227. Manbachi, A. and Cobbold, R.S.C. (2011) Development and application of piezoelectric materials for ultrasound generation and detection. Ultrasound, 19 (4), 187-196.
228. Lin, S.Y. (2003) Composite Ultrasonic Transducers, Shanxi Normal University Press, Xi'an.
229. Zhou, G.P., Liang, Z.F. and Li, Z.Z. (2007) A tubular focused sonochemistry reator. Chinese Science Bulletin, 52 (14), 1902-1905.
230. Liang, Z.F. (2006) Vibration analysis and sound field characteristics of a tubular ultrasonic radiator. Ultrasonics, 45 (1-4), 146-151.
231. Xu, L., Lin, S.Y. and Hu, W.X. (2011) Optimization design of high power ultrasonic circular ring radiator in coupled vibration. Ultrasonics, 51 (7), 815-823.
232. Lin, S.Y. (2008) The radial composite piezoelectric ceramic transducer. Sensors and Actuators A, 141 (2), 136-143.
233. Chen, Q.Y. and Yan, S.B. (1990) Experimental study on a burner with the rod-whistle ultrasonic atomizer. Applied Acoustics, 9 (5), 37-41.
234. Zhu, Y.G. and Wang, X.F. (1967) An experimental study on ultrasonic injection nozzle. Journal of Propulsion Technology, 18 (3), 68-72.
235. Grigoreva, V.M. (1966) Effect of ultrasonic vibrations on personnel working with ultrasonic equipment. Soviet Physics-Acoustics, 11 (3), 426-427.
236. Acton, W.I. (1968) A criterion for the prediction of auditory and subjective effects due to airborne noise from ultrasonic sources. Annals of Occupational Hygiene, 11 (4), 227-234.
237. Acton, W.I. (1974) The effects of industrial airborne ultrasound on humans. Ultrasonics, 12 (5), 124-127.
238. IRPA (1981) Draft: Guidelines on Limits of Human Exposure to Airborne Acoustic Energy Having One-Third Octave Bands with Mid Frequencies from 8 to 50 kHz. International Radiation Protection Association, International Non-Ionizing Radiation Committee (IRPA/INIRC), November 1981.
239. World Health Organization (1982) International Programme on Chemical - Environmental Health Criteria 22: Ultrasound, Geneva, Switzerland.