Da-KGM based GO-reinforced FMBO-loaded aerogels for efficient arsenic removal in aqueous solution

International Journal of Biological Macromolecules

Volumn 94, Issue , 2017, Pages 527-534

  Ye, Shuxin ^a   Jin, Weiping ^a   Huang, Qing ^a   Hu, Ying ^a   Li, Yan ^a   Li, Jing ^a,b   Li, Bin ^a,b  

^a HUAZHONG AGRICULTURAL UNIVERSITY   (China)

^b HUBEI UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Arsenic adsorption; Da KGM GO aerogels; FMBO

Indexed keywords

ARSENIC ACID; ARSENIC TRIOXIDE; DEACETYLATED KONJAC GLUCOMANNAN; GRAPHENE OXIDE; POLYSACCHARIDE; UNCLASSIFIED DRUG; (1-6)-ALPHA-GLUCOMANNAN; ARSENIC; GEL; GRAPHITE; MANNAN; OXIDE; WATER POLLUTANT;

ADSORPTION KINETICS; AEROGEL; ARTICLE; COMPRESSION; GENERAL DEVICE; HYDROGEN BOND; INFRARED SPECTROSCOPY; ISOTHERM; SCANNING ELECTRON MICROSCOPY; THERMOGRAVIMETRY; WASTE COMPONENT REMOVAL; WATER CONTAMINATION; X RAY DIFFRACTION; ADSORPTION; CHEMISTRY; COMPRESSIVE STRENGTH; GEL; ISOLATION AND PURIFICATION; KINETICS; THERMODYNAMICS; WATER MANAGEMENT; WATER POLLUTANT;

ADSORPTION; ARSENIC; COMPRESSIVE STRENGTH; GELS; GRAPHITE; KINETICS; MANNANS; OXIDES; THERMODYNAMICS; WATER POLLUTANTS, CHEMICAL; WATER PURIFICATION;

EID: 84993978151     PISSN: 01418130     EISSN: 18790003     Source Type: Journal    
DOI: 10.1016/j.ijbiomac.2016.10.059     Document Type: Article

References (46)

1. [1] Boddu, V.M., Abburi, K., Talbott, J.L., Smith, E.D., Haasch, R., Removal of arsenic(III) and arsenic(V) from aqueous medium using chitosan-coated biosorbent. Water Res. 42 (2008), 633–642.
2. [2] Bissen, M., Frimmel, F.H., Arsenic—a review. Part I: occurrence toxicity, speciation, mobility. Acta Hydroch. Hydrob. 31 (2003), 9–18.
3. 2 and chitosan/CuO composite sorbents. Carbohydr. Polym. 134 (2015), 190–204.
4. [4] Schnoor, J.L., Environmental Modeling: Fate and Transport of Pollutants in Water, Air, and Soil. 1996, John Wiley and Sons.
5. [5] Wu, Z., Li, W., Webley, P.A., Zhao, D., General and controllable synthesis of novel mesoporous magnetic iron oxide@ carbon encapsulates for efficient arsenic removal. Adv. Mater. 24 (2012), 485–491.
6. [6] Jacukowicz-Sobala, I., Ociński, D., Kociołek-Balawejder, E.B., Synthesis and evaluation of a novel hybrid polymer containing manganese and iron oxides as a sorbent for As(III) and As(V) removal. Ind. Eng. Chem. Res. 52 (2013), 6453–6461.
7. [7] González, J.A., Villanueva, M.E., Piehl, L.L., Copello, G.J., Development of a chitin/graphene oxide hybrid composite for the removal of pollutant dyes: adsorption and desorption study. Chem. Eng. J. 280 (2015), 41–48.
8. [8] Zhang, G., Qu, J., Liu, H., Liu, R., Wu, R., Preparation and evaluation of a novel Fe–Mn binary oxide adsorbent for effective arsenite removal. Water Res. 41 (2007), 1921–1928.
9. [9] Chang, F., Qu, J., Liu, R., Zhao, X., Lei, P., Practical performance and its efficiency of arsenic removal from groundwater using Fe-Mn binary oxide. J. Environ. Sci. 22 (2010), 1–6.
10. [10] Wu, K., Wang, H., Liu, R., Zhao, X., Liu, H., Qu, J., Arsenic removal from a high-arsenic wastewater using in situ formed Fe–Mn binary oxide combined with coagulation by poly-aluminum chloride. J. Hazard. Mater. 185 (2011), 990–995.
11. [11] Wu, K., Liu, R.-P., Liu, H.-J., Lan, H.-C., Qu, J.-H., Enhanced arsenic removal by in situ formed Fe–Mn binary oxide in the aeration-direct filtration process. J. Hazard. Mater. 239 (2012), 308–315.
12. [12] Li, X., He, K., Pan, B., Zhang, S., Lu, L., Zhang, W., Efficient As(III) removal by macroporous anion exchanger-supported Fe–Mn binary oxide: behavior and mechanism. Chem. Eng. J. 193 (2012), 131–138.
13. [13] Gohari, R.J., Lau, W.J., Matsuura, T., Ismail, A.F., Fabrication and characterization of novel PES/Fe–Mn binary oxide UF mixed matrix membrane for adsorptive removal of As(III) from contaminated water solution. Sep. Purif. Technol. 118 (2013), 64–72.
14. [14] Du, X., Li, J., Chen, J., Li, B., Effect of degree of deacetylation on physicochemical and gelation properties of konjac glucomannan. Food Res. Int. 46 (2012), 270–278.
15. [15] Zhu, W.K., Cong, H.P., Yao, H.B., Mao, L.B., Asiri, A.M., Alamry, K.A., Marwani, H.M., Yu, S.H., Bioinspired, ultrastrong, highly biocompatible, and bioactive natural polymer/graphene oxide nanocomposite films. Small 11 (2015), 4298–4302.
16. [16] Park, S., Dikin, D.A., Nguyen, S.T., Ruoff, R.S., Graphene oxide sheets chemically cross-linked by polyallylamine. J. Phys. Chem. C 113 (2009), 15801–15804.
17. [17] Cheng, Q., Wu, M., Li, M., Jiang, L., Tang, Z., Ultratough artificial nacre based on conjugated cross-linked graphene oxide. Angew. Chem. 125 (2013), 3838–3843.
18. [18] Fan, L., Luo, C., Sun, M., Li, X., Lu, F., Qiu, H., Preparation of novel magnetic chitosan/graphene oxide composite as effective adsorbents toward methylene blue. Bioresour. Technol. 114 (2012), 703–706.
19. [19] Zhang, K., Dwivedi, V., Chi, C., Wu, J., Graphene oxide/ferric hydroxide composites for efficient arsenate removal from drinking water. J. Hazard. Mater. 182 (2010), 162–168.
20. 2 and graphene oxide for photocatalytic decolorization of methylene blue. Chem. Eng. J. 193 (2012), 203–210.
21. [21] Li, J., Ye, T., Zhou, B., Li, B., Facile preparation of clay reinforced konjac glucomannan aerogels. RSC Adv. 4 (2014), 22251–22254.
22. [22] Liu, Y., Ma, J., Wu, T., Wang, X., Huang, G., Liu, Y., Qiu, H., Li, Y., Wang, W., Gao, J., Cost-effective reduced graphene oxide-coated polyurethane sponge as a highly efficient and reusable oil-absorbent. ACS Appl. Mater. Interfaces 5 (2013), 10018–10026.
23. [23] Kargarzadeh, H., Ahmad, I., Abdullah, I., Dufresne, A., Zainudin, S.Y., Sheltami, R.M., Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers. Cellulose 19 (2012), 855–866.
24. [24] An, N.T., Thien, D.T., Dong, N.T., Dung, P.L., Du, N.V., Characterization of glucomannan from some Amorphophallus species in Vietnam. Carbohydr. Polym. 80 (2010), 308–311.
25. [25] Ye, S., Jin, W., Huang, Q., Hu, Y., Shah, B.R., Li, Y., Li, B., Development of Mag-FMBO in clay-reinforced KGM aerogels for arsenite removal. Int. J. Biol. Macromol. 87 (2016), 77–84.
26. 2+ ions. Carbon 50 (2012), 4856–4864.
27. [27] Li, B., Xu, Z., Xie, B., Preparation and temperature effect on the swelling behavior of konjac glucomannan—methylcellulose blend film. Eur. Food Res. Technol. 223 (2006), 132–138.
28. [28] Chen, J., Liu, C., Chen, Y., Chen, Y., Chang, P.R., Structural characterization and properties of starch/konjac glucomannan blend films. Carbohydr. Polym. 74 (2008), 946–952.
29. [29] Ye, X., Kennedy, J., Li, B., Xie, B., Condensed state structure and biocompatibility of the konjac glucomannan/chitosan blend films. Carbohydr. Polym. 64 (2006), 532–538.
30. [30] Xiao, C., Liu, H., Lu, Y., Zhang, L., Characterization of poly (vinylpyrrolidone)–konjac glucomannan blend films. J. Appl. Polym. Sci. 81 (2001), 1049–1055.
31. [31] Heux, L., Hägglund, P., Putaux, J.-L., Chanzy, H., Structural aspects in semicrystalline samples of the mannan II family. Biomacromolecules 6 (2005), 324–332.
32. [32] Liu, Z.-H., Wang, Z.-M., Yang, X., Ooi, K., Intercalation of organic ammonium ions into layered graphite oxide. Langmuir 18 (2002), 4926–4932.
33. [33] Wu, K., Liu, R., Liu, H., Chang, F., Lan, H., Qu, J., Arsenic species transformation and transportation in arsenic removal by Fe-Mn binary oxide–coated diatomite: pilot-scale field Study. J. Environ. Eng. 137 (2011), 1122–1127.
34. [34] Kong, S., Wang, Y., Zhan, H., Yuan, S., Yu, M., Liu, M., Adsorption/oxidation of arsenic in groundwater by nanoscale Fe-Mn binary oxides loaded on zeolite. Water Environ. Res. 86 (2014), 147–155.
35. [35] Deschamps, E., Ciminelli, V.S., Höll, W.H., Removal of As(III) and As(V) from water using a natural Fe and Mn enriched sample. Water Res. 39 (2005), 5212–5220.
36. [36] Inbaraj, B.S., Chiu, C., Ho, G., Yang, J., Chen, B., Effects of temperature and pH on adsorption of basic brown 1 by the bacterial biopolymer poly (γ-glutamic acid). Bioresour. Technol. 99 (2008), 1026–1035.
37. [37] Inbaraj, B.S., Wang, J., Lu, J., Siao, F., Chen, B., Adsorption of toxic mercury(II) by an extracellular biopolymer poly (γ-glutamic acid). Bioresour. Technol. 100 (2009), 200–207.
38. [38] Maliyekkal, S.M., Philip, L., Pradeep, T., As(III) removal from drinking water using manganese oxide-coated-alumina: performance evaluation and mechanistic details of surface binding. Chem. Eng. J. 153 (2009), 101–107.
39. [39] Nguyen, D.C., Park, H.J., Dockko, S., Han, M.Y., Arsenic removal using novel combined Fe/Mn adsorbent modified with silica. Water Sci. Technol.: Water Supply 13 (2013), 1109–1115.
40. [40] Gang, D.D., Deng, B., Lin, L., As(III) removal using an iron-impregnated chitosan sorbent. J. Hazard. Mater. 182 (2010), 156–161.
41. [41] Chang, F., Qu, J., Liu, H., Liu, R., Zhao, X., Fe–Mn binary oxide incorporated into diatomite as an adsorbent for arsenite removal: preparation and evaluation. J. Colloid Interface Sci. 338 (2009), 353–358.
42. [42] Kundu, S., Gupta, A., Adsorption characteristics of As(III) from aqueous solution on iron oxide coated cement (IOCC). J. Hazard. Mater. 142 (2007), 97–104.
43. 2-loaded polystyrene resin. Sci. Total Environ. 326 (2004), 197–207.
44. [44] Guo, X., Chen, F., Removal of arsenic by bead cellulose loaded with iron oxyhydroxide from groundwater. Environ. Sci. Technol. 39 (2005), 6808–6818.
45. [45] Balaji, T., Yokoyama, T., Matsunaga, H., Adsorption and removal of As(V) and As(III) using Zr-loaded lysine diacetic acid chelating resin. Chemosphere 59 (2005), 1169–1174.
46. [46] Sposito, G., The Surface Chemistry of Soils. 1984, Oxford University Press.