Base triggered release of insecticide from bentonite reinforced citric acid crosslinked carboxymethyl cellulose hydrogel composites

Carbohydrate Polymers

Volumn 156, Issue , 2017, Pages 303-311

  Sarkar, Dhruba Jyoti ^a   Singh, Anupama ^a  

^a INDIAN AGRICULTURAL RESEARCH INSTITUTE   (India)

Author keywords

Biopolymeric hydrogel; Gallagher Corrigan; Thiamethoxam; Triggered release formulations

Indexed keywords

ALKALINITY; BENTONITE; CELLULOSE; CITRIC ACID;

CARBOXY-METHYL CELLULOSE; EFFICIENT CONTROL; HYDROGELS COMPOSITES; KINETICS ANALYSIS; KINETICS STUDIES; NEUTRAL CONDITIONS; THIAMETHOXAM; TRIGGERED RELEASE;

HYDROGELS;

CITRIC ACID; COMPOSITES; CROSS LINKING; ENCAPSULATION; INSECTICIDES;

BENTONITE; CARBOXYMETHYLCELLULOSE; CITRIC ACID; INSECTICIDE;

CHEMISTRY; HYDROGEL;

BENTONITE; CARBOXYMETHYLCELLULOSE SODIUM; CITRIC ACID; HYDROGELS; INSECTICIDES;

EID: 84988447859     PISSN: 01448617     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbpol.2016.09.045     Document Type: Article

References (52)

1. Abu-Jdayil, B., Ghannam, M., The modification of rheological properties of sodium bentonite-water dispersions with low viscosity CMC polymer effect. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 36:10 (2014), 1037–1048.
2. Angelo, M.J., The law and ecology of pesticides and pest management. 2016, Routledge, New York.
3. Barbucci, R., Magnani, A., Consumi, M., Swelling behavior of carboxymethylcellulose hydrogels in relation to cross-linking, pH and charge density. Macromolecules 33 (2000), 7475–7480.
4. Bohnhoff, G.L., Shackelford, C.D., Malusis, M.A., Scalia, J., Benson, C.H., Edil, T.B., et al. Novel bentonites for containment barrier applications. Delage, P., Desrues, J., Frank, R., Puech, A., Schlosser, F., (eds.) Proceedings, 18th international conference on soil mechanics and geotechnical engineering-Challenges and innovations in geotechnics, Vol. 4, 2013, Presses des Ponts, Paris, 2997–3000.
5. Buczkowski, G., Roper, E., Chin, D., Mothapo, N., Wossler, T., Hydrogel baits with low‐dose thiamethoxam for sustainable Argentine ant management in commercial orchards. Entomologia Experimentalis et Applicata 153:3 (2014), 183–190.
6. Bueno, V.B., Bentini, R., Catalani, L.H., Petri, D.F.S., Synthesis and swelling behavior of xanthan-based hydrogels. Carbohydrate Polymers 92 (2013), 1091–1099.
7. Capitani, D., Porro, F., Segre, A.L., High field NMR analysis of the degree of substitution in carboxymethyl cellulose sodium salt. Carbohydrate Polymers 42:3 (2000), 283–286.
8. Chen, L., Ahadi, A., Zhou, J., Sta°hl, J.E., Modeling effect of surface roughness on nanoindentation tests. Procedia CIRP 8 (2013), 334–339.
9. Davidson, D., Gu, F.X., Materials for sustained and controlled release of nutrients and molecules to support plant growth. Journal of Agricultural and Food Chemistry 60:4 (2012), 870–876.
10. Di, J., Yao, S., Ye, Y., Cui, Z., Yu, J., Ghosh, T.K., et al. Stretch-triggered drug delivery from wearable elastomer films containing therapeutic depots. ACS Nano 9:9 (2015), 9407–9415.
11. Dow, J.A., pH gradients in lepidopteran midgut. Journal of Experimental Biology 172 (1992), 355–375.
12. Flory, P.J., Principles of polymer chemistry. 1953, Cornell University, New York: Ithaca.
13. Gallagher, K.M., Corrigan, O.I., Mechanistic aspects of the release of levamisole hydrochloride from biodegradable polymers. Journal of Controlled Release 69:2 (2000), 261–272.
14. Gupta, P., Vermani, K., Garg, S., Hydrogels: From controlled release to pH-responsive drug delivery. Drug Discovery Today 7:10 (2002), 569–579.
15. Hashem, M., Sharaf, S., Abd El-Hady, M.M., Hebeish, A., Synthesis and characterization of novel carboxymethylcellulose hydrogels and carboxymethylcellulolse-hydrogel-ZnO-nanocomposites. Carbohydrate Polymers 95 (2013), 421–427.
16. Hilton, M.J., Jarvis, T.D., Ricketts, D.C., The degradation rate of thiamethoxam in European field studies. Pest Management Science 72 (2016), 388–397.
17. Hosseini, H., Tenhu, H., Hietala, S., Rheological properties of thermoresponsive nanocomposite hydrogels. Journal of Applied Polymer Science, 133, 2016, 43123.
18. Hu, R., Ren, X., Hou, G., Shao, D., Gong, Y., Chen, X., et al. Carboxymethyl cellulose modified magnetic bentonite composite for efficient enrichment of radionuclides. RSC Advances 6 (2016), 65136–65145.
19. Huang, X., Brazel, C.S., On the importance and mechanisms of burst release in matrix-controlled drug delivery systems. Journal of Controlled Release 73 (2001), 121–136.
20. Jianga, H., Sua, W., Mathera, P.T., Bunninga, T.J., Rheology of highly swollen chitosan/polyacrylate hydrogels. Polymer 40 (1999), 4593–4602.
21. Karmakar, R., Singh, S.B., Kulshrestha, G., Kinetics and mechanism of the hydrolysis of thiamethoxam. Journal of Environmental Science Health B 44:5 (2009), 435–441.
22. Kim, B., Flamme, K.L., Peppas, N.A., Dynamic swelling behavior of pH-sensitive anionic hydrogels used for protein delivery. Journal of Applied Polymer Science 89 (2003), 1606–1613.
23. Kono, H., Oshima, K., Hashimoto, H., Shimizu, Y., Tajima, K., NMR characterization of sodium carboxymethyl cellulose: Substituent distribution and mole fraction of monomers in the polymer chains. Carbohydrate Polymers 146 (2016), 1–9.
24. Kydonius, A.F., Fundamental concepts of Controlled release. Kydonius, A.F., (eds.) Controlled release technologies: Methods theory and applications, 1980, CRC Press, Boca Raton FL, 1–20.
25. Li, A., Wang, A., Chen, J., Studies on poly(acrylic acid)/attapulgite superabsorbent composite. I. Synthesis and characterization. Journal of Applied Polymer Science 92 (2004), 1596–1603.
26. Li, J., Lu, J., Li, Y., Carboxylmethylcellulose/bentonite composite gels: Water sorption behavior and controlled release of herbicide. Journal of Applied Polymer Science 112 (2009), 261–268.
27. Liu, Y., Wang, W., Yang, J., Zhou, C., Sun, J., pH-sensitive polymeric micelles triggered drug release for extracellular and intracellular drug targeting delivery. Asian Journal of Pharmaceutical Sciences 8 (2013), 159–167.
28. Marcombe, R., Cai, S., Hong, W., Zhao, X., Lapusta, Y., Suo, Z., A theory of constrained swelling of a pH-sensitive hydrogel. Soft Matter 6 (2010), 784–793.
29. Mitra, N.K., Sandilya, B., Role of exchangeable cations on the dehydration-rehydration flexibility of bentonite clay. Transactions of the Indian Ceramic Society 28:2 (1969), 52–58.
30. Mulla, M.S., Mian, L.S., Biological and environmental impact of insecticides malathion and parathion on nontarget biota in aquatic ecosystems. Gunther, F.A., Gunther, G.D., (eds.) Residue reviews: Residues of pesticides and other contaminants in the total environment, 1981, Springer, New York, 101–136.
31. Ninni, L., Ermatchkov, V., Hasse, H., Maurer, G., Influence of salt and pH on the swelling equilibrium of ionizable N-IPAAm based hydrogels: Experimental results and modeling. Sadowski, G., Richtering, W., (eds.) Intelligent hydrogels, 2013, 163–173 Progress in Colloid and Polymer Science, 140, Springer International Publishing.
32. Omidian, H., Hashemi, S.A., Sammes, P.G., Meldrum, I., A model for the swelling of superabsorbent polymers. Polymer 39:26 (1998), 6697–6704.
33. Ranđelović, M.S., Purenović, M.M., Matović, B.Z., Zarubica, A.R., Momčilović, M.Z., Purenović, J.M., Structural, textural and adsorption characteristics of bentonite-based composite. Microporous and Mesoporous Materials 195 (2014), 67–74.
34. Ritger, P.L., Peppas, N.A., A simple equation for description of solute release I. Fickian and anomalous release from non swellable devices in the form of slabs, spheres, cylinders or discs. Journal of Controlled Release 5 (1987), 23–36.
35. Roy, A., Singh, S.K., Bajpai, J., Bajpai, A.K., Controlled pesticide release from biodegradable polymers. Central European Journal of Chemistry 12:4 (2014), 453–469.
36. Rozema, D.B., Blokhin, A.V., Wakefield, D.H., Benson, J.D., Carlson, J.C., Klein, J.J., et al. Protease-triggered siRNA delivery vehicles. Journal of Controlled Release 209 (2015), 57–66.
37. Rudzinski, W.E., Dave, A.M., Vaishnav, U.H., Kumbar, S.G., Kulkarni, A.R., Aminabhavi, T.M., Hydrogels as controlled release devices in agriculture. Designed Monomers and Polymers 5:1 (2002), 39–65.
38. Saini, D.R., Shenoy, A.V., Viscoelastic properties of highly loaded ferrite-filled polymeric systems. Polymer Engineering & Science 26 (1986), 441–445.
39. Sarkar, M., Dana, K., Ghatak, S., Banerjee, A., Polypropylene-clay composite prepared from Indian bentonite. Bulletin of Material Science 31:1 (2008), 23–28.
40. Sarkar, D.J., Kumar, J., Shakil, N.A., Walia, S., Release kinetics of controlled release formulations of thiamethoxam employing nano-ranged amphiphilic PEG and diacid based block polymers in soil. Journal of Environmental Science and Health Part A 47:11 (2012), 1701–1712.
41. Sarkar, D.J., Singh, A., Mandal, P., Kumar, A., Parmar, B.S., Synthesis and characterization of poly (cmc-g-cl-paam/zeolite) superabsorbent composites for controlled delivery of zinc micronutrient: Swelling and release behavior. Polymer-Plastics Technology and Engineering 54:4 (2015), 357–367.
42. Sarkar, D.J., Singh, A., Gaur, S.R., Shenoy, A.V., Viscoelastic properties of borax loaded CMC-g-cl-Poly(AAm) hydrogel composites and their boron nutrient release behavior. Journal of Applied Polymer Science, 133(38), 2016, 43969.
43. Scher, H.B., Microencapsulated pesticides. Scher, H.B., (eds.) Controlled release pesticides, 1977, ACS Symposium Series; American Chemical Society, Washington, DC, 126–144.
44. Seo, S., Lee, C.S., Jung, Y.S., Na, K., Thermo-sensitivity and triggered drug release of polysaccharide nanogels derived from pullulan-g-poly(l-lactide) copolymers. Carbohydrate Polymers 87:2 (2012), 1105–1111.
45. Shenoy, A.V., Rheology of filled polymer systems. 1999, Springer, Netherland.
46. Sun, D., Sun, W., Fang, L., Swelling characteristics of Gaomiaozi bentonite and its prediction. Journal of Rock Mechanics and Geotechnical Engineering 6:2 (2014), 113–118.
47. 13C NMR study of the dissociation of tartaric and citric acids. Theoretical and Experimental Chemistry 26:6 (1991), 660–664.
48. Tavares, D.A., Roat, T.C., Carvalho, S.M., Silva-Zacarin, E.C.M., Malaspina, O., In vitro effects of thiamethoxam on larvae of Africanized honey bee Apis mellifera (Hymenoptera: Apidae). Chemosphere 135 (2015), 370–378.
49. Yang, K., Wan, S., Chen, B., Gao, W., Chen, J., Liu, M., et al. Dual pH and temperature responsive hydrogels based on β-cyclodextrin derivatives for atorvastatin delivery. Carbohydrate Polymers 136 (2016), 300–306.
50. Zhang, J., Wang, Q., Wang, A., Synthesis and characterization of chitosan-g-poly(acrylic acid)/attapulgite superabsorbent composites. Carbohydrate Polymers 68 (2007), 367–374.
51. Zhao, J., Chitosan-based gels for the drug delivery system. Yao, K., Li, J., Yao, F., Yin, Y., (eds.) Chitosan-based hydrogels: Functions and applications, 2012, CRC Press, Boca Raton, FL, 263–314.
52. Zustiak, S.P., Leach, J.B., Hydrolytically degradable poly(ethylene glycol) hydrogel scaffolds with tunable degradation and mechanical properties. Biomacromolecules 11:5 (2010), 1348–1357.