Metrological characterization of 3D imaging systems: Progress report on standards developments

17th International Congress of Metrology, CIM 2015

Volumn , Issue , 2015, Pages

  Beraldin, J Angelo ^a   MacKinnon, David ^a   Cournoyer, Luc ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOBILE MANUFACTURE; MANUFACTURE; SCHEDULING; SPECIFICATIONS; UNITS OF MEASUREMENT;

CHARACTERIZATION METHODS; MAINTENANCE CONTRACTS; MANUFACTURING ACTIVITIES; METROLOGICAL CHARACTERIZATION; PRODUCTION PIPELINES; SPECIFICATION SHEETS; STANDARDS DEVELOPMENT; THREE-DIMENSIONAL (3D) IMAGING SYSTEMS;

IMAGING SYSTEMS;

EID: 84980407318     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1051/metrology/20150013003     Document Type: Conference Paper

References (53)

1. G. Vosselman, H. Mass (Ed.), Airborne and Terrestrial Laser Scanning (Whittles Publishing 2010)
2. N. Pears, Y. Liu, P. Bunting (Ed.), 3D Imaging, Analysis and Applications (Springer-Verlag 2012)
3. R. Leach (Ed.) Optical Measurement of Surface Topography (Springer-Verlag 2011)
4. T. Luhmann, S. Robson, S. Kyle, J. Boehm, Close-Range Photogrammetry and 3D Imaging (De Gruyter Textbook, 2nd ed. xviii, 2013)
5. ISO/IEC Guide 2:2004, Standardization and related activities-General vocabulary.
6. JCGM, International vocabulary of metrology, 3rd edition, JCGM 200 (2012)
7. R.F. Aubin, A World Wide Assessment of Rapid Prototyping Technologies, Report No.9413 (United Technologies Research Center, East Hartford, CT 06108, Jan. 1994)
8. J.-A. Beraldin, B. Carrier, D. MacKinnon, L. Cournoyer, "Characterization of Triangulation-Based 3D Imaging Systems Using Certified Artifacts", NCSL International Measure: The Journal of Measurement Science 12/2012; 7(4), 80.
9. D.J. Whitehouse, Handbook of surface and nanometrology (CRC Press 1993)
10. K. J. Stout, L. Blunt, Three dimensional surface topography (Butterworth Heinemann June 2000)
11. R. Leach, Characterisation of areal surface texture (Springer-Verlag 2013)
12. ISO/TC 213 Dimensional and geometrical product specifications and verification. WG 16 Areal and profile surface texture.
13. T. Luhmann, K. Wendt, "Recommendations for an acceptance and verification test of optical 3-D measurement systems", International Archives of Photogrammetry and Remote Sensing. Vol. XXXIII/B5 493-500 (Amsterdam 2000)
14. VDI, Optical 3D measuring systems, VDI/VDE 2634.
15. C.P. Keferstein, R., Züst, "Minimizing technical and financial risk when integrating and applying optical sensors for in-process measurement", IMS International Forum, 475-482 (2004).
16. S. Carmignato, "Experimental study on performance verification tests for coordinate measuring systems with optical distance sensors", Three-Dimensional Imaging Metrology, Proc. of SPIE-IS&T Electronic Imaging, SPIE 7239, 72390I, 2009.
17. ISO, Geometrical Product Specifications (GPS)-Acceptance and reverification tests for coordinate measuring machines (CMM), ISO 10360.
18. G.S. Cheok, A. M. Lytle, K. S. Saidi, "ASTM E57 3D imaging systems committee: An update", Proceedings of SPIE-The International Society for Optical Engineering (Impact Factor: 0.2). 05 (2008)
19. ASTM (E57), Committee E57 on 3D Imaging Systems, ASTM International.
20. R. Gottwald, Field Procedures for Testing Terrestrial Laser Scanners (TLS) A Contribution to a Future ISO Standard (FIG 2008)
21. ISO, Optics and optical instruments-Field procedures for testing geodetic and surveying instruments, ISO 17123.
22. ISO, Optics and optical instruments-Laboratory procedures for testing surveying and construction instruments, ISO 16331.
23. ISO 25178-3:2012, Geometrical product specifications (GPS)-Surface texture: Areal-Part 3: Specification operators.
24. ISO 16610-Geometrical product specifications (GPS)-Filtration.
25. R.K. Leach, H. Haitjema, Limitations and comparisons of surface texture measuring instruments, Meas. Sci. Technol. 21, 32001 (2010).
26. B46.1-2009, Surface Texture (Surface Roughness, Waviness, Lay).
27. X. J. Jiang, D.J. Whitehouse, Technological shifts in surface metrology, CIRP Annals-Manufacturing Technology, 61(2), 815-836, (2012)
28. C.L. Giusca, R.K. Leach, "Calibration of the metrological characteristics of Imaging Confocal Microscopes (ICMs), Measurement Good Practice Guide No. 128 National Physical Laboratory. (2013)
29. R.K. Leach, "Some issues of traceability in the field of surface topography measurement", Wear, 257/12, 1246-1249 (2004)
30. Y. Zhou, A.P. Fard, A. Davies," Characterization of instrument drift using a spherical artifact", Precision Engineering, 38(2), 443-447 (2014)
31. R.K. Leach, C.L. Giusca, P. Rubert, "A single set of material measures for the calibration of areal surface topography measuring instruments: the NPL Areal Bento Box, Metrology and Properties of Engineering Surfaces, 2013": Proc. of the 14th International Conference (14th MPES), 17-21 June 2013, Taipei, Taiwan, 406-413 (2013)
32. R.K. Leach, C. Evans, L. He, A. Davies, A. Duparré, A. Henning, C.W. Jone, D. O'Connor, Open questions in surface topography measurement: a roadmap, Surf. Topogr.: Metrol. Prop. 3, 013001 (2015)
33. W. Ehrig, U. Neuschaefer-Rube, Artefacts with rough surfaces for verification of optical microsensors, Proc. SPIE 6616, Optical Measurement Systems for Industrial Inspection V, 661626 (18 June 2007)
34. U. Neuschaefer-Rube; M. Neugebauer, T.Dziomba, H.U. Danzebrink, L. Koenders, H. Bosse, New developments of measurement standards and procedures for micro and nanometrology, PTB, 11th International Symposium on Measurement and Quality Control Sept. 11-13, Cracow-Kielce, Poland (2013)
35. VDI-Standard: VDI/VDE 2617 Blatt 6.2 Accuracy of coordinate measuring machines-Characteristics and their testing-Guideline for the application of DIN EN ISO 10360 to coordinate measuring machines with optical distance sensors. http://www.vdi.eu/(last accessed June 2015)
36. ISO 14253-1 1998 Geometrical product specifications (GPS)-Inspection by measurement of workpieces and measuring equipment-Decision rules for proving conformity or nonconformity with specifications.
37. ISO 23165:2006 Geometrical product specifications (GPS)-Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty.
38. ISO 10360-8: 2013-Acceptance and reverification tests for coordinate measuring machine (CMM)-Part 8: CMMs with optical distance sensors.
39. A. Voltan, Metrological performance verification of optical Coordinate Measuring Systems [PhD thesis], 163 pp. University of Padova, Italy (2010)
40. Robson, S., Beraldin, J.-A., Brownhill, A., MacDonald, L., "Artefacts for optical surface measurement", Videometrics, Range Imaging, Applications XI, 8085(1) (25 May 2011)
41. G. Guidi, M., Russo, G., Magrassi, M., Bordegoni, "Resolution characterization of 3D cameras", Proc. SPIE 7239, Three-Dimensional Imaging Metrology, 72390O (January 19, 2009)
42. ASTM (E57 E2544-11a), Committee E57 on 3D Imaging Systems, Standard Terminology for Three-Dimensional (3D) Imaging Systems, doi 10.1520/E2544-11A, ASTM International.
43. E. Savio, L. De Chiffre, R. Schmitt, "Metrology of freeform shaped parts", CIRP Annals Manufacturing Technology 56/2, 810-835 (2007)
44. H. Schwenke, F. Wäldele, K. Wendt, Abnahme, Überwachung und Kalibrierung von flexiblen Industriemeßsystemen mit CCD-Kameras, Final report of project: Flexible 3-D-Industriemesssysteme (EA-3-DIMSY), (1998).
45. B. Acko, M. McCarthy, F. Haertig, B. Buchmeister, "Standards for testing freeform measurement capability of optical and tactile coordinate measuring machines", Meas. Sci. Technol. 23 094013 (2012)
46. L. Iuliano, P. Minetola, A. Salmi, "Proposal of an innovative benchmark for comparison of the performance of contactless digitizers", Meas. Sci. Technol. 21, 105102-105114 (2010)
47. D. MacKinnon, B. Carrier, J.-A. Beraldin, L. Cournoyer, GD&T-Based Characterization of Short-Range Non-contact 3D Imaging Systems, Int J Comput Vis. 102, 56-72 (2013)
48. G.S. Lane, "The application of stereographic techniques to the scanning electron microscope", Journal of Physics E. Scientific Instruments 2, 565 (1969)
49. T. Luhmann, F. Bethmann, B. Herd, J. Ohm, "Comparison and verification of optical 3-d surface measurement systems", The Intern. Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, V. XXXVII. Part B5, 51-56 (2008)
50. I. Toschi, J.-A. Beraldin, L. Cournoyer, L. De Luca, A. Capra, "Evaluating Dense 3D Surface Reconstruction Techniques using a Metrological Approach", NCSLI Measure J. Meas. Sci., 10/1, 38-48 (2015).
51. X. Colonna de Lega, P. J. de Groot, "Lateral resolution and instrument transfer function as criteria for selecting surface metrology instruments", Imaging and Applied Optics Digest (2012)
52. R. Leach and B. Sherlock, Applications of superresolution imaging in the field of surface topography measurement, Surf. Topogr.: Metrol. Prop. 2 (2014) 023001.
53. D. MacKinnon, J.-A. Beraldin, L. Cournoyer, M. Picard, F. Blais, "Lateral resolution challenges for triangulation-based three-dimensional imaging systems", Optical Engineering 03, 51(2) (2012)