Proposal of an innovative benchmark for comparison of the performance of contactless digitizers

Measurement Science and Technology

Volumn 21, Issue 10, 2010, Pages

  Iuliano, Luca ^a   Minetola, Paolo ^a   Salmi, Alessandro ^a  

^a POLITECNICO DI TORINO   (Italy)

Author keywords

Contactless digitizing; Contactless inspection; Optical scanners; Performance; Quality control; Reverse engineering

Indexed keywords

BENCHMARKING; COMPUTER AIDED DESIGN; COORDINATE MEASURING MACHINES; INSPECTION; LASER RECORDING; REVERSE ENGINEERING; SCANNING; THREE DIMENSIONAL COMPUTER GRAPHICS;

ACCURACY AND REPEATABILITIES; CONTACT LESS; ENGINEERING APPLICATIONS; GEOMETRICAL TOLERANCES; OPTICAL MEASURING SYSTEMS; OPTICAL SCANNERS; PERFORMANCE; PERFORMANCE SPECIFICATIONS;

QUALITY CONTROL;

EID: 78149304857     PISSN: 09570233     EISSN: 13616501     Source Type: Journal    
DOI: 10.1088/0957-0233/21/10/105102     Document Type: Article

References (38)

1. Iuliano L, Minetola P and Violante M G 2007 Design and production of fixtures for free-form components using selective laser sintering Rapid Prototyping J. 13 30-7
2. Gao J, Folkes J, Yilmaz O and Gindy N 2005 Investigation of a 3D non-contact measurement based blade repair integration Aircr. Eng. Aerosp. Technol. 77 34-41
3. Bernard A and Veron M 2000 Visibility theory applied to automatic control of 3D complex parts using plane laser sensor CIRP Ann. 49 113
4. Iuliano L and Vezzetti E 2002 Application of reverse engineering to paleontology Proc. Scanning 2002 (Paris, France) pp 145-58
5. Williams F L and Richtsmeier J T 2003 Comparison of mandibular landmarks from computed tomography and 3D digitizer data Clin. Anat. 26 494-500
6. Boehler W and Marbs A 2004 3D scanning and photogrammetry for heritage recording: a comparison Proc. Geoinformatics 2004 (University of Gävle, Sweden) pp 291-8
7. ElMaraghy W and Rolls C 2001 Design by quality product digitization CIRP Ann. 50 93
8. ISO /IEC 2007 International vocabulary of basic and general terms in metrology (VIM) ISO/IEC GUIDE 99:2007 (E/F) 1st edn (Geneva, Switzerland: ISO/IEC)
9. The Association of German Engineers 2002 Optical 3D-measuring systems-optical systems based on area scanning VDI/VDE 2634 part 2
10. The Association of German Engineers 2008 Optical 3D-measuring systems-multiple view systems based on area scanning VDI/VDE 2634 part 3
11. De Chiffre L and Hansen H N 1995 Metrological limitations of optical probing techniques for dimensional measurements CIRP Ann. 44 501
12. Beraldin J A 2008 Digital 3D imaging and modeling: a metrological approach Time Compression Technol. Mag. 33-5 January/February
13. Jecić S and Drvar N 2004 3D shape measurement influencing factors MATEST 2004 (Zagreb, Croatia) pp 109-16
14. Lazzari A and Iuculano G 2004 Evaluation of the uncertainty of an optical machine with a vision system for contact-less three-dimensional measurement Measurement 36 215-31
15. Santo M D, Liguori C, Paolillo A and Pietrosanto A 2004 Standard uncertainty evaluation in image-based measurements Measurement 36 347-58
16. Tsai M J and Hung C C 2006 A fast evaluation approach of geometrical correspondence uncertainty for 3-D vision measurement system JSME Int. J. 49 527-34
17. Dorsch R G, Hausler G and Herrmann J M 1994 Laser triangulation: fundamental uncertainty in distance measurement Appl. Opt. 33 1306-14
18. Marinello F, Bariani P, Savio E, Horsewell A and De Chiffre L 2008 Critical factors in SEM 3D stereo microscopy Meas. Sci. Technol. 19 065705
19. Contri A, Bourdet P and Lartigue C 2006 Quality of 3D digitised points obtained with non-contact optical sensors CIRP Ann. 51 443-6
20. Sansoni G, Carocci M and Rodella R 2000 Calibration and performance evaluation of a 3-D imaging sensor based on the projection of structured light IEEE Trans. Instrum. Meas. 49 628-36
21. Marinello F, Savio E, Carmignato S and De Chiffre L 2008 Calibration artefact for the microscale with high aspect ratio: the fiber gauge CIRP Ann. 57 497-500
22. De Chiffre L, Hansen H N and Morace R E 2005 Comparison of coordinate measuring machines using an optomechanical hole plate CIRP Ann. 54 479-85
23. Sansoni G and Docchio F 2005 In-field performance of an optical digitizer for the reverse engineering of free-form surfaces Int. J. Adv. Manuf. Technol. 26 1353-61
24. Bariani P, De Chiffre L, Hansen H N and Horsewell A 2005 Investigation on the traceability of three dimensional scanning electron microscope measurements based on the stereo-pair technique Precis. Eng. 29 219-28
25. Beraldin J A, Rioux M, Cournoyer L, Blais F, Picard M and Pekelsky J 2007 Traceable 3D imaging metrology Proc. 8th Conf. Optical 3-D Measurement Techniques (Zurich, Switzerland)
26. Vlaar S T and van der Zel J M 2006 Accuracy of dental digitizers Int. Dent. J. 56 301-9
27. Guidi G, Remondino F, Morlando G, Del Mastio A, Uccheddu F and Pelagotti A 2007 Performances evaluation of a low cost active sensor for cultural heritage documentation Proc. 8th Conf. Optical 3-D Measurement Techniques (Zurich, Switzerland) pp 59-69
28. Mechelke K, Kersten T P and Lindstaedt M 2007 Comparative investigations into the accuracy behaviour of the new generation of terrestrial laser scanning system Proc. 8th Conf. Optical 3-D Measurement Techniques (Zurich, Switzerland) pp 319-27
29. US Product Data Association 1996 IGES: initial graphics exchange specifications 5.3 ANS US PRO IPO-100-1996 National Institute of Standards and Technology, US PRO, USA http://wwwnistgov/iges
30. Li Y and Gu P 2005 Inspection of free-form shaped parts Robot. Comput.-Integr. Manuf. 21 421-30
31. Iuliano L and Minetola P 2009 Enhancing moulds manufacturing by means of reverse engineering Int. J. Adv. Manuf. Technol. 43 551-62
32. International Organization for Standardization 2009 Geometrical product specifications (GPS)-acceptance and reverification tests for coordinate measuring machines (CMM): part 2. CMMs used for measuring linear dimensions ISO 10360-2:2009
33. Li Y and Gu P 2005 Feature-based alignment and comparison between portion and whole of free-form surfaces CIRP Ann. 54 135
34. Savio E, De Chiffre L and Schmitt R 2007 Metrology of freeform shaped parts CIRP Ann. 56 810-35
35. Wang Z, Braynston-Cross P J and Whitehouse D J 1996 Phase difference determination by fringe pattern matching Opt. Laser Technol. 28 417-22
36. Perry K E and McKelvie J 1995 Reference phase shift determination in phase-shifting interferometry Opt. Lasers Eng. 22 79-90
37. Pagès J, Salvi J, García R and Matabosch C 2003 Overview of coded light projection techniques for automatic 3D profiling IEEE Int. Conf. Robotics and Automation, ICRA (Taipei, Taiwan) pp 133-8
38. Sirat G Y, Paz F, Agronik G and Wilner K 2005 Conoscopic holography Proc. SPIE 5972 597202.