Surface texturing of tribological interfaces using the vibromechanical texturing method

Journal of Manufacturing Science and Engineering

Volumn 131, Issue 6, 2009, Pages 0610051-0610058

  Greco, Aaron ^a   Raphaelson, Steven ^a   Ehmann, Kornel ^a   Wang, Q Jane ^a   Lin, Chih ^b  

^a Northwestern University   (United States)

^b BAKER HUGHES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM COATED STEEL; COST EFFECTIVENESS; CYLINDERS (SHAPES); HARDENING; SURFACE TOPOGRAPHY; TEXTURES; TOPOGRAPHY;

COST-EFFECTIVE MEANS; FRICTION PERFORMANCE; MECHANICAL COMPONENTS; OPEN-LOOP CONTROL SYSTEMS; PROCESS INDUCED DAMAGE; SLIDING CONTACTS; SURFACE-TEXTURING; WORKPIECE MATERIALS;

TRIBOLOGY;

EID: 77955300348     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4000418     Document Type: Article

References (30)

1. Etsion, I., and Halperin, G., 2002, "A Laser Surface Textured Hydrostatic Mechanical Seal," Tribol. Trans., 45(3), pp. 430-434.
2. Etsion, I., and Burstein, L., 1996, "Model for Mechanical Seals With Regular Microsurface Structure," Tribol. Trans., 39(3), pp. 677-683.
3. Etsion, I., Kligerman, Y., and Halperin, G., 1999, "Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces," Tribol. Trans., 42(3), pp. 511-516.
4. Yu, X. Q., He, S., and Cai, R. L., 2002, "Frictional Characteristics of Mechanical Seals With a Laser-Textured Seal Face," J. Mater. Process. Technol., 129(1-3), pp. 463-466.
5. Wang, X., Kato, K., Adachi, K., and Aizawa, K., 2001, "The Effect of Laser Texturing of SiC Surface on the Critical Load for the Transition of Water Lubrication Mode From Hydrodynamic to Mixed," Tribol. Int., 34(10), pp. 703-711.
6. Wang, X., Kato, K., Adachi, K., and Aizawa, K., 2003, "Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water," Tribol. Int., 36(3), pp. 189-197.
7. Kligerman, Y., Etsion, I., and Shinkarenko, A., 2005, "Improving Tribological Performance of Piston Rings by Partial Surface Texturing," ASME J. Tribol., 127(3), pp. 632-638.
8. Ryk, G., Kligerman, Y., and Etsion, I., 2002, "Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components," Tribol. Trans., 45(4), pp. 444-449.
9. Ryk, G., and Etsion, I., 2006, "Testing Piston Rings With Partial Laser Surface Texturing for Friction Reduction," Wear, 261(7-8), pp. 792-796.
10. Suh, N. P., Mosleh, M., and Howard, P. S., 1994, "Control of Friction," Wear, 175(1-2), pp. 151-158.
11. Tian, H., Saka, N., and Suh, N. P., 1989, "Boundary Lubrication Studies on Undulated Titanium Surfaces," Tribol. Trans., 32(3), pp. 289-296.
12. Pettersson, U., and Jacobson, S., 2003, "Influence of Surface Texture on Boundary Lubricated Sliding Contacts," Tribol. Int., 36(11), pp. 857-864.
13. Wakuda, M., Yamauchi, Y., Kanzaki, S., and Yasuda, Y., 2003, "Effect of Surface Texturing on Friction Reduction Between Ceramic and Steel Materials Under Lubricated Sliding Contact," Wear, 254(3-4), pp. 356-363.
14. Krupka, I., Koutný, D., and Hartl, M., 2008, "Behavior of Real Roughness Features Within Mixed Lubricated Non-Conformal Contacts," Tribol. Int., 41(12), pp. 1153-1160.
15. Nanbu, T., Ren, N., Yasuda, Y., Zhu, D., and Wang, Q. J., 2008, "Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion," Tribol. Lett., 29(3), pp. 241-252.
16. Erdemir, A., 2005, "Review of Engineered Tribological Interfaces for Improved Boundary Lubrication," Tribol. Int., 38(3), pp. 249-256.
17. Mourier, L., Mazuyer, D., Lubrecht, A. A., and Donnet, C., 2006, "Transient Increase of Film Thickness in Micro-Textured EHL Contacts," Tribol. Int., 39(12), pp. 1745-1756.
18. Rivin, E. I., 1999, Stiffness and Damping in Mechanical Design, Dekker, New York.
19. Willis, E., 1986, "Surface Finish in Relation to Cylinder Liners," Wear, 109(1-4), pp. 351-366.
20. Etsion, I., 2005, "State of the Art in Laser Surface Texturing," ASME J. Tribol., 127(1), pp. 248-253.
21. Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., and Etsion, I., 2005, "The Effect of Laser Surface Texturing on Transitions in Lubrication Regimes During Unidirectional Sliding Contact," Tribol. Int., 38(3), pp. 219-225.
22. Pettersson, U., and Jacobson, S., 2006, "Tribological Texturing of Steel Surfaces With a Novel Diamond Embossing Tool Technique," Tribol. Int., 39(7), pp. 695-700.
23. Schneider, Y. G., 1973, "Vibro-Rolling," Machinery and Production Engineering, 122(3147), pp. 342-346.
24. Schneider, Y. G., 1984, "Formation of Surfaces With Uniform Micropatterns on Precision Machine and Instruments Parts," Precis. Eng., 6(4), pp. 219-225.
25. Hong, M. S., and Ehmann, K. F., 1995, "Generation of Engineered Surfaces by the Surface-Shaping System," Int. J. Mach. Tools Manuf., 35(9), pp. 1269-1290.
26. Kim, H.-S., and Kim, E.-J., 2003, "Feed-Forward Control of Fast Tool Servo for Real-Time Correction of Spindle Error in Diamond Turning of Flat Surfaces," Int. J. Mach. Tools Manuf., 43(12), pp. 1177-1183.
27. Zhu, W.-H., Jun, M. B., and Altintas, Y., 2001, "A Fast Tool Servo Design for Precision Turning of Shafts on Conventional CNC Lathes," Int. J. Mach. Tools Manuf., 41(7), pp. 953-965.
28. Qian, L., and Hossan, M. R., 2007, "Effect on Cutting Force in Turning Hardened Tool Steels With Cubic Boron Nitride Inserts," J. Mater. Process. Technol., 191(1-3), pp. 274-278.
29. Etsion, I., Kligerman, Y., and Kadin, Y., 2005, "Unloading of an Elastic-Plastic Loaded Spherical Contact," Int. J. Solids Struct., 42(13), pp. 3716-3729. (Pubitemid 40220202)
30. Matsumoto, Y., Barash, M. M., and Liu, C. R., 1987, "Cutting Mechanism During Machining of Hardened Steel," Mater. Sci. Technol., 3(4), pp. 299-305.