Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids

Tribology International

Volumn 99, Issue , 2016, Pages 198-210

  Wang, Yaogang ^a   Li, Changhe ^a   Zhang, Yanbin ^a   Li, Benkai ^a   Yang, Min ^a   Zhang, Xianpeng ^a   Guo, Shuming ^a   Liu, Guotao ^a  

^a QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

Friction and wear; Lubrication behavior; MQL grinding; Nanofluids

Indexed keywords

ALUMINUM; CARBON; CARBON NANOTUBES; GRINDING (MACHINING); MOLYBDENUM COMPOUNDS; NANODIAMONDS; NANOFLUIDICS; NANOPARTICLES; NICKEL ALLOYS; WEAR RESISTANCE; YARN; ZIRCONIUM ALLOYS;

EXPERIMENTAL EVALUATION; FRICTION AND WEAR; LUBRICATING PROPERTIES; LUBRICATION PERFORMANCE; MINIMUM QUANTITY LUBRICATION; NANO-DIAMOND PARTICLES; NANOFLUIDS; PHYSICOCHEMICAL PROPERTY;

LUBRICATION;

EID: 84964034478     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2016.03.023     Document Type: Article

References (42)

1. S. Malkin Grinding technology: theory and applications of machining with abrasives Grind Technol Theory Appl Mach Abras 31 2008 435 436
2. W.F. Ding, Y.J. Zhu, L.C. Zhang, J.H. Xu, Y.C. Fu, W.D. Liu, and C.Y. Yang Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels Wear 332 2015 800 809
3. C.H. Li, J.Y. Li, S. Wang, and D.Z. Jia Modeling and numerical simulation of the grinding temperature field with nanoparticle jet of MQL Adv Mech Eng 227 5 2013 167 181
4. U. Baheti, C. Guo, and S. Malkin Environmentally conscious cooling and lubrication for grinding Proc Int Semin Improv Mach Tool Perform 2 1998 643 654
5. C.H. Li, Y.L. Hou, S.C. Xiu, and G.Q. Cai Application of lubrication theory to near-dry green grinding-feasibility analysis Adv Mater Res 44 2008 135 142
6. C. Mao, H.F. Zou, Y. Huang, Y.F. Li, and Z.X. Zhou Analysis of heat transfer coefficient on workpiece surface during minimum quantity lubricant grinding Int J Adv Manuf Technol 66 1-4 2013 363 370
7. D.K. Zhang, C.H. Li, D.Z. Jia, Y.B. Zhang, and X.W. Zhang Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding Chin J Aeronaut 28 2 2015 570 581
8. 3 engineering ceramic J Clean Prod 66 2014 632 643
9. E.A. Rahim, and H. Sasahara An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under MQL condition Mach Sci Technol 15 1 2011 76 90
10. E.A. Rahim, and H. Sasahara Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil Proc Inst Mech Eng, Part B: J Eng Manuf 225 9 2011 1505 1511
11. E.A. Rahim, and H. Sasahara A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys Tribol Int 44 3 2011 309 317
12. C.Z. Hu, M.L. Bai, J.Z. Lv, P. Wang, and X.J. Li Molecular dynamics simulation on the friction properties of nanofluids confined by idealized surfaces Tribol Int 78 2014 152 159
13. B. Shen, A.J. Shih, and S.C. Tung Application of nanofluids in minimum quantity lubrication grinding Tribol Trans 51 6 2008 730 737
14. 2 as additives in grease Tribol Int 92 2015 454 461
15. P. Kalita, A.P. Malshe, S.A. Kumar, V.G. Yoganath, and T. Gurumurthy Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants J Manuf Processes 14 2 2012 160 166
16. P.H. Lee, J.S. Nam, C. Li, and S.W. Lee An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL) Int J Precis Eng Manuf 13 3 2012 331 338
17. C. Mao, X.J. Tang, H.F. Zou, X.M. Huang, and Z.X. Zhou Investigation of grinding characteristic using nanofluid minimum quantity lubrication Int J Precis Eng Manuf 13 10 2012 1745 1752
18. D.Z. Jia, C.H. Li, D.K. Zhang, Y.B. Zhang, and X.W. Zhang Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding J Nanopart Res 16 12 2014 1 15
19. 2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding Int J Mach Tools Manuf 99 2015 19 33
20. S.M. Alves, B.S. Barros, M.F. Trajano, K.S.B. Ribeiro, and E. Moura Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions Tribol Int 65 2013 28 36
21. B. Shen, and A.J. Shih Minimum quantity lubrication (MQL) grinding using vitrified CBN wheels Trans NAMRI/SME 37 2009 129 136
22. Z.R. Liu The Research of Heat Transfer Theory by Nanofluids Jet Lubrication and the Evaluation of the Surface Integrity in Grinding 2010 Qingdao Technological University China
23. S. Malkin, and C. Guo Grinding technology-theory and applications of machining with abrasives 2nd ed. 2008 Industrial Press New York
24. J.H. Zhang, P.Q. Ge, and L. Zhang Research on the grinding force based on the probability statistics China Mech Eng 18 20 2007 2399 2402
25. B.M. Li Modern grinding technology 1th ed. 2003 China Machine Press Beijing 418 419
26. M.A. Younis, and H. Alawi Probabilistic analysis of the surface grinding process Trans Can Soc Mech Eng 8 4 1984 208 213
27. P. Kalita Testing of nano-engineered lubricants for minimum quantity lubrication (MQL) grinding: performance testing and fundamental understanding 2009 University of Arkansas America
28. 2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil J Clean Prod 87 2015 930 940
29. S.M. Alves, J.F.G. Oliveira. Vegetable based cutting fluid-an environmental alternative to grinding process. In: Proceedings of the 15th CIRP International Conference on Life Cycle Engineering, Syndey 2008; pp. 664-668
30. P. Kalita, A.P. Malshe, and K.P. Rajurkar Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding CIRP Ann Manuf Technol 61 1 2012 327 330
31. G. Nehme, R. Mourhatch, and P.B. Aswath Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditions Wear 268 9 2010 1129 1147
32. C.G. Lee, Y.J. Hwang, Y.M. Choi, J.K. Lee, C. Choi, and J.M. Oh A study on the tribological characteristics of graphite nano lubricants International J Precis Eng Manuf 10 1 2009 85 90
33. T. Uemura, M. Ohba, and S. Kitagawa Size and surface effects of prussian blue nanoparticles protected by organic polymers Inorg Chem 43 23 2004 7339 7345
34. T. Tawakoli, M.J. Hadad, and M.H. Sadeghi Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant-lubricant types Int J Mach Tools Manuf 50 8 2010 698 708
35. H.L. Yu, Y. Xu, P.J. Shi, H.M. Wang, M. Wei, K.K. Zhao, and B.S. Xu Microstructure, mechanical properties and tribological behavior of tribofilm generated from natural serpentine mineral powders as lubricant additive Wear 297 1 2013 802 810
36. 2 nanotubes as potential oil additives Wear 280 2012 36 45
37. B. Yu, Z.L. Liu, C.B. Ma, J.J. Sun, W.M. Liu, and F. Zhou Ionic liquid modified multi-walled carbon nanotubes as lubricant additive Tribol Int 81 2015 38 42
38. 2 particles as additive in lubricating oil Lubr Eng 32 5 2007 112 115
39. K. Lee, Y. Hwang, S. Cheong, L. Kwon, S. Kim, and J. Lee Performance evaluation of nano-lubricants of fullerene nanoparticles in refrigeration mineral oil Curr Appl Phys 9 2 2009 128 131
40. O. Elomaa, J. Oksanen, T.J. Hakala, O. Shenderova, and J. Koskinen A comparison of tribological properties of evenly distributed and agglomerated diamond nanoparticles in lubricated high-load steel-steel contact Tribol Int 71 2014 62 68
41. C.H. Li, G.Q. Cai, Q. Li, S.C. Xiu, and F. Liu Investigation on material removal mechanism for abrasive jet precision finishing with grinding wheel as restraint China Mech Eng 16 23 2006 2116 2119
42. D. Setti, M.K. Sinha, S. Ghosh, and P.V. Rao Performance evaluation of Ti-6Al-4V grinding using chip formation and coefficient of friction under the influence of nanofluids Int J Mach Tools Manuf 88 2015 237 248