Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditions

Wear

Volumn 268, Issue 9-10, 2010, Pages 1129-1147

  Nehme, Gabi ^b   Mourhatch, Ramoun ^a   Aswath, Pranesh B ^a  

^a The University of Texas at Arlington   (United States)

^b UNIVERSITY OF BALAMAND   (Lebanon)

Author keywords

Boundary lubrication; Contact loads; Focused ion beam; Nanomechanical properties; Transmission electron microscopy; Tribofilms; XANES

Indexed keywords

BOUNDARY LUBRICATIONS; CONTACT LOAD; CONTACT LOADS; NANOMECHANICAL PROPERTIES; NANOMECHANICAL PROPERTY; TRIBOFILMS; XANES;

CRYSTALLINE MATERIALS; DEBRIS; FOCUSED ION BEAMS; FRICTION; INORGANIC COATINGS; IONS; MIXTURES; OXIDES; PHOSPHATES; PHOSPHORUS; SCANNING ELECTRON MICROSCOPY; SULFUR; TESTING; TRANSMISSION ELECTRON MICROSCOPY; X RAY ANALYSIS; ZINC; ZINC SULFIDE;

TRIBOLOGY;

EID: 77949263577     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2010.01.001     Document Type: Article

References (50)

1. Khorramian B.A., Iyer G.R., Kodali S., Natarajan P., and Tupil R. Review of antiwear additives for crankcase oils. Wear 169 1 (1993) 87-95
2. Hardy W.B. Collected Scientific Papers of Sir William Bate Hardy (1936), Cambridge University Press, Cambridge, England
3. Godot M. Third bodies in tribology. Wear 136 (1990) 29-45
4. Willermet P.A., Dailey D.P., Carter III R.O., Schmitz P.J., and Zhu W. Mechanism of formation of antiwear films from zinc dialkyldithiophosphates. Tribology International 28 3 (1995) 177-187
5. Martin J., Grossiord C., Le Mogne T., and Igarashi J. Transfer films and friction under boundary lubrication. Wear 245 1 (2000) 107-115
6. Yin Z., Kasrai M., Bancroft G.M., Laycock K.F., and Tan K.H. Chemical characterization of antiwear films generated on steel by zinc dialkyl dithiophosphate using X-ray absorption spectroscopy. Tribology International 26 6 (1993) 383-388
7. Spikes H.A. The history and mechanisms of ZDDP. Tribology Letters 17 3 (2004) 469-489
8. So H., and Lin R.C. The combined effects of ZDDP, surface texture and hardness on the running-in of ferrous metals. Tribology International 32 5 (1999) 243-253
9. Sheasby J.S., Caughlin T.A., and Mackwood W.A. The effect of steel hardness on the performance of antiwear additives. Wear 201 1-2 (1996) 209-216
10. Bell J.C., and Richards M.N. Some effects of hardness and microstructure on the lubricated wear of steels. Proceedings of 14th Leeds/Lyon Symposium on Tribology (1987) 343-353
11. Martin J.M., Mansot J.L., Berbezier I., and Dexpert H. The nature and origin of wear particles from boundary lubrication with a zinc dialkyl dithiophosphate. Wear 93 2 (1984) 117-126
12. Cao L.L., Sun Y.M., and Zheng L.Q. Chemical structure characterization of the boundary lubrication film using X-ray photoelectron spectroscopy and scanning auger microprobe techniques. Wear 140 (1990) 345-357
13. Barnes A.M., Bartle K.D., and Thibon V.R.A. A review of zinc dialkyldithiophosphates (ZDDPS): characterization and role in the lubricating oil. Tribology International 34 6 (2001) 389-395
14. Smith G.C. Surface analytical science and automotive lubrication. Applied Physics Letters 33 (2000) 187
15. Coy R.C., and Jones R.B. Chemistry of the thermal degradation of zinc dialkyldithiophosphate additives. ASLE Transactions 24 1 (1981) 91-97
16. Barkshire I.R., Prutton M., and Smith G.C. Multi-spectral Auger microscopy of tribological surfaces. Applied Surface Science 84 (1995) 331-338
17. Tung S.C., and McMillan M.L. Automotive tribology overview of current advances and challenges for the future. Tribology International 37 7 (2004) 517-536
18. Neville A., and Kollia-Rafailidi V. A comparison of boundary wear film formation on steel and a thermal sprayed Co/Cr/Mo coating under sliding conditions. Wear 252 3-4 (2002) 227-239
19. Ning Z., Ming Z.D., Lu J.J., Fang X., and Guan M. Effect of sulphide layers on the tribological behavior of steels under boundary lubrication conditions. Applied Surface Science 181 (2001) 61-67
20. Sheasby J.S., Jennings M.C., and Cassells K.D. The effect of sample spin on boundary lubrication by several oil blends based upon zinc dialkyldithiophosphates. Wear 231 2 (1999) 256-264
21. Sheasby J.S., Caughlin T.A., and Mackwood W.A. A comparison of the boundary lubrication of 52100 steel, zirconia and silicon nitride by S, P, S/P and zinc dialkyl dithiophosphate additives. Wear 196 1-2 (1996) 100-109
22. Gao Y., Wu Z., Zhang Z., and Xue Q. Study on tribological properties of 2,5-dialkoxymethylthio-1,3,4-thiadiazoles. Wear 222 2 (1998) 129-134
23. Grubin A.N. Fundamentals of the Hydrodynamic Theory of Lubrication of Heavily Loaded Cylindrical Surfaces (1949), Central Scientific Research Institute for Technology and Mechanical Engineering, Moscow, USSR pp. 337
24. Dowson D., and Higginson G.R. Elastohydrodynamic Lubrication (1966), Pergamon Press, London, UK pp. 235
25. Archard J.F., and Cowking E.W. Elastohydrodynamic lubrication at point contacts. Proceedings of Institution of Mechanical Engineers 180 3B (1965-1966) 47-56
26. Hamrock B.J., and Dowson D. Isothermal elastohydrodynamic lubrication of point contacts. Journal of Lubrication Technology Transactions ASME 99 Ser F (1977) 15-23
27. Archard J.F. Single contacts and multiple encounters. Journal of Applied Physics 32 8 (1961) 1405-1425
28. Archard J.F. Contact and rubbing of flat surfaces. Journal of Applied Physics 14 (1953) 981-988
29. Finkin E.F. Explanation of the wear of metals. Wear 47 1 (1978) 107-117
30. Kimura Y., Okada K., and Yamamoto T. Wear during lubricated rolling contact. ASLE Transactions 24 1 (1981) 15-22
31. Rabinowicz E., and Hozaki K. Impact wear of ductile metals. Proceedings of the JSLE International Tribology Conference, vol. 2 (1985), Elsevier Science Publishing Co, New York, NY, USA 263-268
32. Smith G.C., and Bell J.C. Multi-technique surface analytical studies of automotive anti-wear films. Applied Surface Science 144-145 (1999) 222-227
33. Fuller M., Yin Z., Kasrai M., Bancroft G.M., Yamaguchi E.S., Ryason P.R., Willermet P.A., and Tan K.H. Chemical characterization of tribochemical and thermal films generated from neutral and basic ZDDPs using X-ray absorption spectroscopy. Tribology International 30 4 (1997) 305-315
34. Somayaji A., Mourhatch R., and Aswath P.B. Nanoscale properties of tribofilms from ZDDP and fluorinated ZDDP in the presence and absence of antioxidants. Journal of Nanoscience and Nanotechnology 7 (2007) 4378-4390
35. Somayaji A., and Aswath P.B. Antiwear behavior of ZDDP and fluorinated ZDDP in the presence of alkylated diphenyl amine antioxidants. Tribology Transactions 51 4 (2008) 403-412
36. Nicholls M.A., Norton P.R., Bancroft G.M., Kasrai M., Do T., Frazer B.H., and De Stasio G. Nanometer scale chemomechanical characterization of antiwear films. Tribology Letters 17 2 (2004) 205-216
37. Martin J.M., Mansot J.L., Berbezier I., Belin M., and Balossier G. Microstructural aspects of lubricated mild wear with zinc dialkyldithiophosphate. Wear 107 4 (1986) 355-366
38. Huq M.Z., Chen X., Aswath P.B., and Elsenbaumer R.L. Thermal degradation behavior of zinc dialkyl dithiophosphate in presence of catalyst and detergents in neutral oil. Tribology Letters 19 2 (2005) 127-134
39. Huq M.Z., Aswath P.B., and Elsenbaumer R.L. TEM studies of anti-wear films/wear particles generated under boundary conditions lubrication. Tribology International 40 1 (2007) 111-116
40. Ito K., Martin J., Minfray C., and Kato K. Low-friction tribofilm formed by the reaction of ZDDP on iron oxide. Tribology International 39 12 (2006) 1538-1544
41. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load displacement sensing indentation experiments. Journal of Material Research 7 (1992) 1564-1583
42. Bec S., Tonck A., Georges J.M., Coy R.C., Bell J.C., and Roper G.W. Relationship between mechanical properties and structures of zinc dithiophosphate anti-wear films. Proceedings of Royal Society of London A 455 (1999) 4181-4203
43. Aktary M., McDermott M.T., and McAlpine G.A. Morphology and nanomechanical properties of ZDDP antiwear films as a function of tribological contact time. Tribology Letters 12 3 (2002) 155-163
44. Ye J., Araki S., Kano M., and Yasuda Y. Nanometer scale mechanical/structural properties of molybdenum dithiocarbamate and zinc dialkylsithiophosphate tribofilms and friction reduction mechanism. Japanese Journal of Applied Physics 44 7B (2005) 5358-5361
45. Mosey N.J., Woo T.K., Kasrai M., Norton P.R., Bancroft G.M., and Muser M.H. Interpretation of experiments on ZDDP antiwear films through pressure induced cross linking. Tribology Letters 24 (2006) 105
46. D. Shakhvorostov, M.A. Nicholls, P.R. Norton, M.H. Muser, Mechanical properties of zinc and calcium phosphates: structural insights and relevance to anti-wear functionality, Tribology Letters, in press.
47. Najman M., Kasrai M., Bancroft G.M., and Davidson R. Combination of ashless antiwear additives with metallic detergents: interactions with neutral and overbased calcium sulfonates. Tribology International 39 (2006) 342-355
48. Willermet P.A., Dailey D.P., Carter III R.O., Schmitz P.J., Zhu W., and Bell J.C. The composition of lubricant-derived surface layers formed in a lubricated cam tappet contact. II: Effects of adding overbased detergent and dispersant to simple ZDDP solution. Tribology International 28 (1995) 163-175
49. de Groot F.M.F., Grioni M., Fuggle J.C., Ghijsen J., Sawatzky G.A., and Petersen H. Oxygen 1s X-ray-absorption edges of transition-metal oxides. Physical Review B (Condensed Matter) 40 8 (1989) 5715-5723
50. 3 nanocrystal observed by O K-Edge X-ray absorption spectroscopy. Nuclear Instruments & Methods in Physics Research Section B (Beam Interactions with Materials and Atoms) 199 (2003) 291-294