Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Chinese Journal of Aeronautics

Volumn 28, Issue 2, 2015, Pages 570-581

  Zhang, Dongkun ^a   Li, Changhe ^a   Jia, Dongzhou ^a   Zhang, Yanbin ^a   Zhang, Xiaowei ^a  

^a QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

Grinding; Minimal quantity of lubrication (MQL); Nanoparticle; Specific grinding energy; Surface roughness

Indexed keywords

CARBON NANOTUBES; FLOODS; LAYERED SEMICONDUCTORS; LUBRICATION; MOLYBDENUM COMPOUNDS; NANOPARTICLES; SURFACE ROUGHNESS; TOPOGRAPHY; ZIRCONIA;

COOLING LUBRICANTS; GRINDING SURFACES; LUBRICATION EFFECT; MINIMAL QUANTITY OF LUBRICATION (MQL); MINIMUM QUANTITY LUBRICATION; SPECIFIC GRINDING ENERGY; VOLUME CONCENTRATION; ZRO2 NANOPARTICLES;

GRINDING (MACHINING);

EID: 84928053976     PISSN: 10009361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cja.2014.12.035     Document Type: Article

References (52)

1. B. Shen, and A.J. Shih Minimum quantity lubrication (MQL) grinding using vitrified CBN wheels Trans NAMRI/SME 37 2009 129 136
2. A.W. Khan, and W.Y. Chen Systematic geometric error modeling for workspace volumetric calibration of a 5-axis turbine blade grinding machine Chin J Aeronaut 23 5 2010 604 615
3. X. Li, Z.T. Chen, and W.Y. Chen Suppression of surface burn in grinding of titanium alloy TC4 using a self-inhaling internal cooling wheel Chin J Aeronaut 24 1 2011 96 101
4. C.H. Li, C. Du, G.Y. Liu, and Y. Zhou Performance evaluation of minimum quantity cooling lubrication using CBN grinding wheel Adv Mater Res 97 4 2010 1827 1831
5. M.A. EI Baradie Cutting fluids: Part I. characterisation J Mater 56 1-4 1996 786 797
6. Z.G. Jiang, H. Zhang, and X. Luo Study on the cutting technology based on green manufacturing Key Eng Mater 375-376 2008 158 162
7. W.F. Ding, J.H. Xu, Z.Z. Chen, H.H. Su, and Y.C. Fu Grindability and surface integrity of cast nickel-based superalloy in creep feed grinding with brazed CBN abrasive wheels Chin J Aeronaut 23 4 2010 501 510
8. S. Malkin, and C. Guo Thermal analysis of grinding CIRP Ann Manuf Technol 56 2 2007 760 782
9. T. Jin, and D.J. Stephenson A study of the convection heat transfer coefficients of grinding fluids CIRP Ann Manuf Technol 57 1 2008 367 370
10. U. Heisel, D. Lutz, R. Wassmer, and U. Walter The minimum quantity lubricant technique and its application in the cutting process Mach Met Mag 386 1998 22 38
11. J.P. Davim, P.S. Sreejith, R. Gomes, and C. Peixoto Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions Proc Inst Mech Eng Part B J Eng Manuf 220 10 2006 1605 1611
12. C.H. Li, Y.L. Hou, S.C. Xiu, and Q.C. Cai Application of lubrication theory to near-dry-green grinding - feasibility analysis Adv Mater Res 44-46 2008 135 142
13. N.R. Dhar, M.T. Ahmed, and S. Islam An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel J Mach Tools Manuf 47 5 2007 748 753
14. V.N. Gaitondea, S.R. Karnikb, and J.P. Davimc Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass J Mater Process Technol 204 1 2008 459 464
15. L.M. Barczak, A.D.L. Batako, and M.N. Morgan A study of plane surface grinding under minimum quantity lubrication (MQL) conditions Int J Mach Tools Manuf 50 11 2010 977 985
16. L.R. Silva, E.C. Bianchi, R.E. Catai, R.Y. Fusse, T.V. Franca, and P.R. Aguiar Study on the behavior of the minimum quantity lubricant-MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steel J Braz Soc Mech Sci Eng 27 2 2005 192 199
17. M.H. Sadeghi, M.J. Haddad, T. Tawakoli, and M. Emami Minimal quantity lubrication-MQL in grinding of Ti-6Al-4V titanium alloy Int J Adv Manuf Technol 44 5-6 2009 487 500
18. A.L. Wang, Y.Q. Wei, X.J. Zhu, and J.Y. Wang Grinding performances of the machining fluids of oils on water Chin J Mech Eng 41 1 2005 208 211 [Chinese]
19. C.H. Li, S. Wang, Q. Zhang, and D.Z. Jia Evaluation of minimum quantity lubrication grinding with nano-particles and recent related patents Recent Pat Nanotech 7 2 2013 167 181
20. X. Li, Z.T. Chen, and W.Y. Chen Suppression of surface burn in grinding of titanium alloy TC4 using a self-inhaling internal cooling wheel Chin J Aeronaut 24 1 2011 96 101
21. S. Wang, C.H. Li, and Q. Zhang Evaluation of grinding performance in minimum quantity lubrication with nanoparticles Manuf Tech Mach Tool 2 2013 86 89
22. P. Krajnik, F. Pusavec, and A. Rashid Nanofluids: properties, applications and sustainability aspects in materials processing technologies G. Seliger, M.M.K. Khraisheh, I.S. Jawahir, Advanced Sustainable Manufacturing 2011 107 113
23. T. Hisakado, T. Tsukizoe, and H. Yoshikawa Lubrication mechanism of solid lubricants in oils J Lubr Technol 105 2 1983 245 252
24. P.H. Lee, J.S. Nam, C. Li, and S.W. Lee An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL) Int J Precis Eng Manuf 13 3 2012 331 338
25. S. Prabhu, and B.K. Vinayagam Nano surface generation of grinding process using carbon nano tubes Sadhana 35 6 2010 747 760
26. M. Sayuti, A.A.D. Sarhan, T. Tanaka, M. Hamdi, and Y. Saito Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system Int J Adv Manuf Technol 65 9-12 2013 1493 1500
27. M. Alberts, K. Kalaitzidou, and S. Melkote An investigation of graphite nanoplatelets as lubricant in grinding Int J Mach Tools Manuf 49 12 2009 966 970
28. S. Prabhu, and B.K. Vinayagam Fractal dimensional surface analysis of AISI D2 tool steel material with nanofluids in grinding process using atomic force microscopy J Braz Soc Mech Sci Eng 33 4 2011 459 466
29. Y.S. Liao, Y.P. Yu, and C.H. Chang Effects of cutting fluid with nano particles on the grinding of titanium alloys Adv Mater Res 126 2010 353 358
30. 3 nanoparticles on surface roughness, tool wear and temperature dissipation in machining Inconel 600 alloy Proc Inst Mech Eng Part N J Nanoeng Nanosyst 225 1 2011 3 16
31. C. Mao, X.J. Tang, H.F. Zou, X.M. Huang, and Z.X. Zhou Investigation of grinding characteristic using nanofluid minimum quantity lubrication Int J Precis Eng Manuf 13 10 2012 1745 1752
32. 2 nanoparticles based grinding fluids in minimum quantity lubrication grinding Trans NAMRI/SME 36 2008 357 364
33. T.K. Nguyen, I. Do, and P. Kwon A tribological study of vegetable oil enhanced by nano-platelets and implication in MQL machining Int J Precis Eng Manuf 13 7 2012 1077 1083
34. M.Y. Tsai, and S.X. Jian Development of a micro-graphite impregnated grinding wheel Int J Precis Eng Manuf 56 2012 94 101
35. P. Kalita, A.P. Malshe, S. Arun Kumar, V.G. Yoganath, and T. Gurumurthy Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants J Manuf Processes 14 2 2012 160 166
36. L.M. Barczak, A.D.L. Batako, and M.N. Morgan A study of plane surface grinding under minimum quantity lubrication (MQL) conditions Int J Mach Tools Manuf 50 11 2010 977 985
37. B. Shen, A.J. Shih, and S.C. Tung Application of nanofluids in minimum quantity lubrication grinding Tribol Trans 51 6 2008 730 737
38. C. Choi, M. Jung, Y. Choi, J. Lee, and J. Oh Tribological properties of lubricating oil-based nanofluids with metal/carbon nanoparticles J Nanosci Nanotechnol 11 1 2011 368 371
39. Y. Hwang, H.S. Park, J.K. Lee, and W.H. Jung Thermal conductivity and lubrication characteristics of nanofluid Curr Appl Phys 6 Suppl. 1 2006 e67 e71
40. Li CH, Jia DZ, Wang S. Oil film formation device by coupling magnetic nano-particle jet flow and magnetic work table. China patent CN 103192323A. 2013 [Chinese].
41. T. Xu, J. Zhao, K. Xu, and Q. Xue Study on the tribological properties of ultradispersed diamond containing soot as an oil additive© Tribol Trans 40 1 1997 178 182
42. P. Kalita, A.P. Malshe, W. Jiang, and A.J. Shih Tribological study of nano lubricant integrated soybean oil for minimum quantity lubrication (MQL) grinding Trans NAMRI/SME 38 2010 137 144
43. P. Kalita, A.P. Malshe, and K.P. Rajurkar Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication grinding CIRP Ann Manuf Technol 61 1 2012 327 330
44. R.L. Wang Lubricants tribochemistry 1994 China Petrochemical Press Beijing [Chinese]
45. S. Chen, and W.M. Liu Tribological properties of capped ZnS nanoparticles as oil additive Lubr Eng 1 2003 5 [Chinese]
46. Y. Ye, J.X. Dong, B.S. Chen, Z.S. Hu, J.F. Fan, and X.J. Ye Effect of wear resistance on nanometer lanthanum borate in lubricating oils Lubr Eng 2 2000 7 [Chinese]
47. L.T. Zhao, G.X. Chen, Y.J. Gao, and P. Cheng Self-repair principle of friction and wear and research progress of self-repair nano-additive Lubr Eng 21 5A 2007 27 29 [Chinese]
48. A. Verma, W. Jiang, H.H. Abu Safe, W.D. Brown, and A.P. Malshe Tribological behavior of deagglomerated active inorganic nanoparticles for advanced lubrication Tribol Trans 51 5 2008 673 678
49. S. Malkin, and C. Guo Grinding technology: theory and application of machining with abrasives 2008 Industrial Press Inc
50. Li CH, Wang S, Zhang Q. Method and device for the prediction of the grinding surface roughness under nano-particle jet MQL. China patent CN 102954756A. 2013 [Chinese].
51. S. Wang, C.H. Li, D.K. Zhang, D.Z. Jia, and Y.B. Zhang Modeling the operation of a common grinding wheel with nanoparticle jet flow minimal quantity lubrication Int J Adv Manuf Technol 74 5-8 2014 835 850
52. Y.L. Qiao Lubrication and selfrepairing technology of nano particles 2005 National Defense Industry Press Beijing [Chinese]