Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding

International Journal of Machine Tools and Manufacture

Volumn 99, Issue , 2015, Pages 19-33

  Zhang, Yanbin ^a   Li, Changhe ^a   Jia, Dongzhou ^a   Zhang, Dongkun ^a   Zhang, Xiaowei ^a  

^a QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

Coefficient of friction; Grinding; Grinding force; Minimum quantity lubrication; MoS2 CNT nanofluids; Surface roughness

Indexed keywords

FRICTION; GRINDING (MACHINING); HEAT TRANSFER; LAYERED SEMICONDUCTORS; LUBRICATION; MOLYBDENUM COMPOUNDS; NANOPARTICLES; NICKEL ALLOYS; SURFACE ROUGHNESS;

COEFFICIENT OF FRICTIONS; EXPERIMENTAL EVALUATION; GRINDING FORCE; HEAT TRANSFER PERFORMANCE; HEAT-CONDUCTIVITY COEFFICIENTS; MINIMAL QUANTITY LUBRICATIONS; MINIMUM QUANTITY LUBRICATION; NANOFLUIDS;

NANOFLUIDICS;

EID: 84941891520     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2015.09.003     Document Type: Article

References (42)

1. D.Z. Jia, C.H. Li, D.K. Zhang, Y.B. Zhang, and X.W. Zhang Experimental verification of nano-particle jet minimum quantity lubrication effectiveness in grinding J. Nanopart. Res. 16 12 2014 1 15
2. C.H. Li, Y.L. Hou, S.C. Xiu, and G.Q. Cai Application of lubrication theory to near-dry-green grinding - feasibility analysis Adv. Mater. Res. 135 4 2008 44 46
3. S. Malkin, and C. Guo Thermal analysis of grinding CIRP Ann. 56 2 2007 760 782
4. C.H. Li, J.Y. Li, S. Wang, and D.Z. Jia Modeling and numerical simulation of the grinding temperature distribution with nano-particle jet of MQL Adv. Mech. Eng. 7 2 2013 167 181
5. T. Tawakoli, M.J. Hadad, and M.H. Sadeghi Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant-lubricant types Int. J. Mach. Tools Manuf. 50 8 2010 698 708
6. M.J. Hadad, T. Tawakoli, M.H. Sadeghi, and B. Sadeghi Temperature and energy partition in minimum quantity lubrication-MQL grinding process Int. J. Mach. Tools Manuf. 54 2012 10 17
7. M. Hadad, and B. Sadeghi Thermal analysis of minimum quantity lubrication-MQL grinding process Int. J. Mach. Tools Manuf. 63 2012 1 15
8. L.M. Barczak, A.D.L. Batako, and M.N. Morgan A study of plane surface grinding under minimum quantity lubrication (MQL) conditions Int. J. Mach. Tools Manuf. 50 11 2010 977 985
9. M. Alberts, K. Kalaitzidou, and S. Melkote An investigation of graphite nanoplatelets as lubricant in grinding Int. J. Mach. Tools Manuf. 49 12 2009 966 970
10. C. Choi, M. Jung, Y. Choi, J. Lee, and J. Oh Tribological properties of lubricating oil-based nanofluids with metal/carbon nano-particles J. Nanosci. Nanotechnol. 11 1 2011 368 371
11. B. Shen, and A.J. Shih Minimum quantity lubrication (MQL) grinding using vitrified CBN whee Trans. NAMRI/SME 37 2009 129 136
12. 2 nano-particles based grinding fluids in minimum quantity lubrication grinding Trans. NAMRI/SME 36 2008 357 364
13. 2 in liquid paraffin Tribol. Lett. 40 1 2010 155 165
14. P. Kalita, P. Ajay, S. Malshe, V.G. Arun Kumar, T. Yoganath, and Gurumurthy Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants J. Manuf. Process. 14 2 2012 160 166
15. P. Kalita, A.P. Malshe, W. Jiang, and W.E.N.P.I.N.G.,A.J. Shih Tribological study of nano lubricant integrated soybean oil for minimum quantity lubrication (MQL) grinding Trans. NAMRI/SME 38 2010 137 144
16. P.H. Lee, T.S. Nam, C. Li, S.W. Lee, 2010. Environmentally-friendly nano-fluid minimum quantity lubrication (MQL) meso-scale grinding process using nano-diamond particles, in: Proceedings of International Conference on Manufacturing Automation (ICMA). pp. 44-49
17. C. Mao, X. Tang, H. Zou, X. Huang, and Z. Zhou Investigation of grinding characteristic using nanofluid minimum quantity lubrication Int. J. Precis. Eng. Manuf. 13 10 2012 1745 1752
18. D.K. Zhang, C.H. Li, Y.B. Zhang, D.Z. Jia, and X.W. Zhang Experimental research on the energy ratio coefficient and specific grinding energy in nano-particle jet MQL grinding Int. J. Adv. Manuf. Technol. 78 5-8 2015 1275 1288
19. D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquere, V. Zerrouki, and J. Vigneau A review of developments towards dry and high speed machining of Inconel 718 alloy Int. J. Mach. Tools Manuf. 44 4 2004 439 456
20. E.A. Rahim, and H. Sasahara An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under MQL condition Mach. Sci. Technol. 15 1 2011 76 90
21. M. Imran, P.T. Mativenga, A. Gholinia, and P.J. Withers Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys Int. J. Mach. Tools Manuf. 76 2014 49 60
22. 3 nano-particles J. Mater. Sci. Eng. 23 2 2005 269 272
23. 2-MgO 2007 University of Jinan China Master's thesis
24. 3-Ce2O3 nano-particles Mar. Technol. 2 2010 51 54
25. L. Li, Z.M. Gu, C.X. Gu, D. Yuan, and Z.Y. Zhou Research on the tribological properties of mixtures of nano-particles of CeO2 and TiO2 as lubricating oil additives Mar. Technol. 5 2007 41 43
26. M.J. O'connell, S.M. Bachilo, C.B. Huffman, V.C. Moore, M.S. Strano, E.H. Haroz, and R.E. Smalley Band gap fluorescence from individual single-walled carbon nanotubes Science 297 5581 2002 593 596
27. Z.R. Liu The research of heat transfer theory by nanofluids jet lubrication and the evaluation of the surface integrity in grinding 2010 Qingdao Technological University China Master's thesis
28. W.B. Rowe, B. Dimitrov, and H. Ohmori Tribology of Abrasive Machining Processes 2012 William Andrew New York
29. M.N. Morgan, L. Barczak, and A. Batako. Temperatures in fine grinding with minimum quantity lubrication (MQL) Int. J. Adv. Manuf. Technol. 60 9-12 2012 951 958
30. S. Wang, C.H. Li, D.K. Zhang, D.Z. Jia, and Y.B. Zhang Modeling the operation of a common grinding wheel with nano-particle jet flow minimal quantity lubrication Int. J. Adv. Manuf. Technol. 74 5-8 2014 835 850
31. Y.F. Yang A relation analysis of surface roughness parameters Taiyuan Sci.Tech. 2 2002 46 47
32. R.V. Hogg, J. McKean, and A.T. Craig Introduction to Mathematical Statistics 2005 Pearson Education New York
33. D.Z. Jia, C.H. Li, D.K. Zhang, S. Wang, and Y.L. Hou Investigation into the formation mechanism and distribution characteristics of suspended microparticles in MQL grinding Recent Pat. Mech. Eng. 7 1 2014 52 62
34. 2 lubricating failure Tribol 16 2 1996 168 172
35. T. Yamamoto, S. Noda, and M. Kato A simple and fast method to disperse long single-walled carbon nanotubes introducing few defects Carbon 49 10 2011 3179 3183
36. L.R. Silva, E.C. Bianchi, R.Y. Fusse, R.E. Catai, T.V. Franc, and P.R. Aguiar Analysis of surface integrity for minimum quantity lubricant - MQL in grinding Int. J. Mach. Tools Manuf. 47 2 2007 412 418
37. 2 nano-particles in jet MQL grinding with different types of vegetable oil as base oil J. Clean. Prod. 87 2014 930 940
38. W.W. Kong The influence of additives and nano-particles on surface tension of lithium and ammonia 2012 Harbin institute of technology China Master's thesis
39. A.M. Munshi, V.N. Singh, M. Kumar, and J.P. Singh Effect of nano-particle size on sessile droplet contact angle J. Appl. Phys. 103 8 2008 084315
40. D.Z. Jia, C.H. Li, D.K. Zhang, Y.B. Zhang, X.W. Zhang, Experimental research on the Influence of the jet parameters of minimum quantity lubrication on the lubricating property of ni-based alloy grinding, Int. J. Adv. Manuf. Technol. 10.1007/s00170-015-7381-y, in press
41. S. Huddedar, P. Chitalkar, A. Chavan, and S.R. Pawade Effect of cooling environment on grinding performance of nickel based superalloy inconel 718 J. Appl. Sci. 12 10 2012 947 954
42. P.L. Tso Study on the grinding of Inconel 718 J. Appl. Phys. 55 3 1995 421 426