Effect of flexure hinge type on a 3D printed fully compliant prosthetic finger

IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM

Volumn 2015-August, Issue , 2015, Pages 790-795

  Mutlu, Rahim ^a   Alici, Gursel ^a   Panhuis, Marc In Het ^a   Spinks, Geoff ^a  

^a UNIVERSITY OF WOLLONGONG   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

COMPLIANT MECHANISMS; COSTS; FINITE ELEMENT METHOD; HINGES; INTELLIGENT MECHATRONICS; MANUFACTURE; MECHANISMS; PROSTHETICS; ROBOTICS; STRUCTURES (BUILT OBJECTS);

ASSEMBLY OPERATIONS; BENDING PERFORMANCE; COMPLIANT FINGERS; FULLY COMPLIANT MECHANISM; FUSED DEPOSITION MODELLING; NUMERICAL RESULTS; PROSTHETIC DEVICES; PROSTHETIC FINGERS;

3D PRINTERS;

EID: 84951115378     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/AIM.2015.7222634     Document Type: Conference Paper

References (31)

1. N. Lobontiu, Compliant Mechanisms: Design of Flexure Hinges: CRC Press, 2002.
2. N. D. Mankame and G. K. Ananthasuresh, "A Novel Compliant Mechanism for Converting Reciprocating Translation Into Enclosing Curved Paths, " Journal of Mechanical Design, vol. 126, pp. 667-672, 2004.
3. J. Speich and M. Goldfarb, "A compliant-mechanism-based three degree-of-freedom manipulator for small-scale manipulation, " Robotica, vol. 18, pp. 95-104, 2000.
4. Y.-M. Moon, "Bio-mimetic design of finger mechanism with contact aided compliant mechanism, " Mechanism and Machine Theory, vol. 42, pp. 600-611, 2007.
5. L. Rubbert, S. Caro, J. Gangloff, and P. Renaud, "Using Singularities of Parallel Manipulators to Enhance the Rigid-Body Replacement Design Method of Compliant Mechanisms, " Journal of Mechanical Design, vol. 136, pp. 051010-051010, 2014.
6. M. L. Culpepper, C. M. DiBiasio, R. M. Panas, S. Magleby, and L. L. Howell, "Simulation of a carbon nanotube-based compliant parallelguiding mechanism: A nanomechanical building block, " Applied Physics Letters, vol. 89, p. 203111, 2006.
7. W. M. Kier and K. K. Smith, "Tongues, tentacles and trunks: The biomechanics of movement in muscular-hydrostats, " Zoological Journal of the Linnean Society, vol. 83, pp. 307-324, 1985.
8. L. Margheri and B. Trimmer, "Soft Robotics Community Events: Meeting Different Backgrounds for Common Challenges, " Soft Robotics, vol. 1, pp. 236-238, 2014/12/01 2014.
9. S. Hirose and M. Mori, "Biologically Inspired Snake-like Robots, " in Robotics and Biomimetics, 2004. ROBIO 2004. IEEE International Conference on, 2004, pp. 1-7.
10. B. Atakan, A. M. Erkmen, and I. Erkmen, 3-D grasping during serpentine motion with a snake-like robot, 2005.
11. R. Kang, A. Kazakidi, E. Guglielmino, D. T. Branson, D. P. Tsakiris, J. A. Ekaterinaris, and D. G. Caldwell, "Dynamic model of a hyperredundant, octopus-like manipulator for underwater applications, " in Intelligent Robots and Systems (IROS), 2011 IEEE/RSJ International Conference on, 2011, pp. 4054-4059.
12. C. Laschi, B. Mazzolai, V. Mattoli, M. Cianchetti, and P. Dario, "Design of a biomimetic robotic octopus arm, " Bioinspiration & Biomimetics, vol. 4, p. 015006, 2009.
13. Y. Yekutieli, R. Sagiv-Zohar, R. Aharonov, Y. Engel, B. Hochner, and T. Flash, "Dynamic Model of the Octopus Arm. I. Biomechanics of the Octopus Reaching Movement, " Journal of Neurophysiology, vol. 94, pp. 1443-1458, 2005.
14. M. W. Hannan and I. D. Walker, "Kinematics and the Implementation of an Elephant's Trunk Manipulator and Other Continuum Style Robots, " Journal of Robotic Systems, vol. 20, pp. 45-63, 2003.
15. O. Salomon and A. Wolf, "Inclined Links Hyper-Redundant Elephant Trunk-Like Robot, " Journal of Mechanisms and Robotics-Transactions of the Asme, vol. 4, Nov 2012.
16. S. Sangok, C. D. Onal, C. Kyu-Jin, R. J. Wood, D. Rus, and K. Sangbae, "Meshworm: A Peristaltic Soft Robot With Antagonistic Nickel Titanium Coil Actuators, " Mechatronics, IEEE/ASME Transactions on, vol. 18, pp. 1485-1497, 2013.
17. S. M. Felton, M. T. Tolley, C. D. Onal, D. Rus, and R. J. Wood, "Robot Self-Assembly by Folding: A Printed Inchworm Robot, " in 2013 IEEE International Conference on Robotics and Automation (ICRA), 2013.
18. L. Huai-Ti, G. L. Gary, and T. Barry, "GoQBot: A caterpillar-inspired soft-bodied rolling robot, " Bioinspiration & Biomimetics, vol. 6, p. 026007, 2011.
19. M. T. Tolley, R. F. Shepherd, B. Mosadegh, K. C. Galloway, M. Wehner, M. Karpelson, R. J. Wood, and G. M. Whitesides, "A Resilient, Untethered Soft Robot, " Soft Robotics, vol. 1, pp. 213-223, 2014/09/01 2014.
20. J. M. Germann, A. Maesani, R. Pericet Camara, and D. Floreano, "Soft Cells for Programmable Self-Assembly of Robotic Modules, " Soft Robotics, vol. 1, pp. 239-245, 2014.
21. A. D. Marchese, C. D. Onal, and D. Rus, "Autonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators, " Soft Robotics, vol. 1, pp. 75-87, 2014/03/01 2014.
22. Available: http://sssa. bioroboticsinstitute. it/research/softrobotics
23. Available: http://softroboticsinc. com/
24. C. D. Onal and D. Rus, "A modular approach to soft robots, " in Biomedical Robotics and Biomechatronics (BioRob), 2012 4th IEEE RAS & EMBS International Conference on, 2012, pp. 1038-1045.
25. Available: http://www. festo. com/cms/en-corp/13655. htm
26. R. Mutlu, G. Alici, X. Xiang, and W. Li, "An active-compliant microstage based on EAP artificial muscles, " in Advanced Intelligent Mechatronics (AIM), 2014 IEEE/ASME International Conference on, 2014, pp. 611-616.
27. S. Tibbits, "4D Printing: Multi-Material Shape Change, " Architectural Design, vol. 84, pp. 116-121, 2014.
28. S. E. Bakarich, R. Gorkin, M. i. h. Panhuis, and G. M. Spinks, "4D Printing with Mechanically Robust, Thermally Actuating Hydrogels, " Macromolecular Rapid Communications, 2015.
29. R. G. E. Clement, K. E. Bugler, and C. W. Oliver, "Bionic prosthetic hands: A review of present technology and future aspirations, " The Surgeon, vol. 9, pp. 336-340, 2011.
30. R. Elmqvist, "Measuring instrument of the recording type, " U. S. Patent 2566443, 1951.
31. E. Sachs, M. Cima, and J. Cornie, "Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model, " CIRP Annals-Manufacturing Technology, vol. 39, pp. 201-204, 1990.