Rational design of all-solid-state ion-selective electrodes and reference electrodes

TrAC - Trends in Analytical Chemistry

Volumn 76, Issue , 2016, Pages 102-114

  Hu, Jinbo ^a   Stein, Andreas ^a   Bühlmann, Philippe ^a  

^a UNIVERSITY OF MINNESOTA   (United States)

Author keywords

Calibration free sensor; Ion sensing; Ion selective electrode; Ion to electron transduction; Reference electrode; Sensor miniaturization; Solid contact

Indexed keywords

ANALYTIC EQUIPMENT; BACTERIOPHAGES; CALIBRATION; CHEMICAL SENSORS; ELECTRODES; IONS; SOLID-STATE SENSORS;

CALIBRATION FREE; ION SENSING; REFERENCE ELECTRODES; SENSOR MINIATURIZATION; SOLID CONTACTS;

ION SELECTIVE ELECTRODES;

CALIBRATION; CAPACITANCE BLOOD VESSEL; ELECTROCHEMISTRY; ELECTRODE; ELECTRON TRANSPORT; HYDROPHOBICITY; ION SELECTIVE ELECTRODE; LIMIT OF DETECTION; POTENTIOMETRY; PRIORITY JOURNAL; REFERENCE ELECTRODE; REPRODUCIBILITY; REVIEW; SENSOR; SIGNAL TRANSDUCTION; SOLID STATE;

EID: 84950997910     PISSN: 01659936     EISSN: 18793142     Source Type: Journal    
DOI: 10.1016/j.trac.2015.11.004     Document Type: Review

References (150)

1. Bakker E., Bühlmann P., Pretsch E. Carrier-based ion-selective electrodes and bulk optodes. 1. general characteristics. Chem. Rev 1997, 97:3083-3132.
2. Bühlmann P., Pretsch E., Bakker E. Carrier-based ion-selective electrodes and bulk optodes. 2. ionophores for potentiometric and optical sensors. Chem. Rev 1998, 98:1593-1688.
3. Johnson R.D., Bachas L. Ionophore-based ion-selective potentiometric and optical sensors. Anal. Bioanal. Chem 2003, 376:328-341.
4. Amemiya S. Potentiometric ion-selective electrodes. Handbook of Electrochemistry 2007, Elsevier, Amsterdam. C.G. Zoski (Ed.).
5. Bobacka J., Ivaska A., Lewenstam A. Potentiometric ion sensors. Chem. Rev 2008, 108:329-351.
6. Lewenstam A. Routines and challenges in clinical application of electrochemical ion-sensors. Electroanalysis 2014, 26:1171-1181.
7. Lindner E., Gyurcsányi R.E. Quality control criteria for solid-contact, solvent polymeric membrane ion-selective electrodes. J. Solid State Electrochem 2009, 13:51-68.
8. Ammann D. Ion-Selective Microelectrodes: Principles, Designs and Application 1986, Springer-Verlag, Berlin.
9. Morf W.E. The Principles of Ion-Selective Electrodes and of Membrane Transport 1981, Elsevier, New York, NY.
10. Pretsch E. The new wave of ion-selective electrodes. TrAC, Trends Anal. Chem 2007, 26:46-51.
11. Michalska A. All-solid-state ion selective and all-solid-state reference electrodes. Electroanalysis 2012, 24:1253-1265.
12. Gyurcsányi R.E., Pretsch E. Nanoscale potentiometry. Nanoelectrochemistry 2015, CRC Press, Boca Raton, FL. M.V. Mirkin, S. Amemiya (Eds.).
13. Hirata H., Date K. Copper(I) sulphide-impregnated silicone rubber membranes as selective electrodes for copper(II) ions. Talanta 1970, 17:883-887.
14. Cattrall R.W., Freiser H. Coated wire ion-selective electrodes. Anal. Chem 1971, 43:1905-1906.
15. Nikolskii B.P., Materowa E.A. Solid sontact in membrane ion-selective electrodes. Ion-Sel. Electrode Rev 1985, 7:3.
16. Cattrall R.W., Drew D.M., Hamilton I.C. Some alkylphosphoric acid esters for use in coated-wire calcium-selective electrodes: part I. Response characteristics. Anal. Chim. Acta 1975, 76:269-277.
17. Hulanicki A., Trojanowicz M. Calcium-selective electrodes with PVC membranes and solid internal contacts. Anal. Chim. Acta 1976, 87:411-417.
18. Lindner E., Umezawa Y. Performance evaluation criteria for preparation and measurement of macro- and microfabricated ion-selective electrodes (IUPAC Technical Report). Pure Appl. Chem 2008, 80:85-104.
19. Bakker E. Enhancing ion-selective polymeric membrane electrodes by instrumental control. TrAC, Trends Anal. Chem 2014, 53:98-105.
20. Guo J., Amemiya S. Voltammetric heparin-selective electrode based on thin liquid membrane with conducting polymer-modified solid support. Anal. Chem 2006, 78:6893-6902.
21. Kim Y., Rodgers P.J., Ishimatsu R., Amemiya S. Subnanomolar Ion detection by stripping voltammetry with solid-supported thin polymeric membrane. Anal. Chem 2009, 81:7262-7270.
22. Jarolimova Z., Crespo G.A., Afshar M.G., Pawlak M., Bakker E. All solid state chronopotentiometric ion-selective electrodes based on ferrocene functionalized PVC. J. Electroanal. Chem 2013, 709:118-125.
23. Jarolímová Z., Crespo G.A., Xie X., Ghahraman Afshar M., Pawlak M., Bakker E. Chronopotentiometric carbonate detection with all-solid-state ionophore-based electrodes. Anal. Chem 2014, 86:6307-6314.
24. Bobacka J. Conducting polymer-based solid-state ion-selective electrodes. Electroanalysis 2006, 18:7-18.
25. Yin T., Qin W. Applications of nanomaterials in potentiometric sensors. TrAC, Trends Anal. Chem 2013, 51:79-86.
26. Bühlmann P., Chen L.D. Ion-selective electrodes with ionophore-doped sensing membranes. Supramolecular Chemistry: From Molecules to Nanomaterials 2012, John Wiley & Sons, New York, NY. J.W. Steed, P.A. Gale (Eds.).
27. Bakker E., Bühlmann P., Pretsch E. The phase-boundary potential model. Talanta 2004, 63:3-20.
28. Cadogan A., Gao Z., Lewenstam A., Ivaska A., Diamond D. All-solid-state sodium-selective electrode based on a calixarene ionophore in a poly(vinyl chloride) membrane with a polypyrrole solid contact. Anal. Chem 1992, 64:2496-2501.
29. Bobacka J., McCarrick M., Lewenstam A., Ivaska A. All solid-state poly(vinyl chloride) membrane ion-selective electrodes with poly(3-octylthiophene) solid internal contact. Analyst 1994, 119:1985-1991.
30. Bobacka J., Lindfors T., McCarrick M., Ivaska A., Lewenstam A. Single-piece all-solid-state ion-selective Electrode. Anal. Chem 1995, 67:3819-3823.
31. Bobacka J. Potential stability of all-solid-state ion-selective electrodes using conducting polymers as ion-to-electron transducers. Anal. Chem 1999, 71:4932-4937.
32. Lindfors T., Ivaska A. pH sensitivity of polyaniline and its substituted derivatives. J. Electroanal. Chem 2002, 531:43-52.
33. +-selective electrodes based on plasticized poly(vinyl chloride). Anal. Chem 2004, 76:4387-4394.
34. + based on poly(3-octylthiophene) (POT). J. Solid State Electrochem 2005, 9:865-873.
35. Veder J.-P., De Marco R., Patel K., Si P., Grygolowicz-Pawlak E., James M., et al. Evidence for a surface confined ion-to-electron transduction reaction in solid-contact ion-selective electrodes based on poly(3-octylthiophene). Anal. Chem 2013, 85:10495-10502.
36. Liu D., Meruva R.K., Brown R.B., Meyerhoff M.E. Enhancing EMF stability of solid-state ion-selective sensors by incorporating lipophilic silver-ligand complexes within polymeric films. Anal. Chim. Acta 1996, 321:173-183.
37. Fibbioli M., Bandyopadhyay K., Liu S.-G., Echegoyen L., Enger O., Diederich F., et al. Redox-active self-assembled monolayers as novel solid contacts for ion-selective electrodes. Chem. Commun 2000, 339-340.
38. Fibbioli M., Bandyopadhyay K., Liu S.-G., Echegoyen L., Enger O., Diederich F., et al. Redox-active self-assembled monolayers for solid-contact polymeric membrane ion-selective electrodes. Chem. Mater 2002, 14:1721-1729.
39. Grygołowicz-Pawlak E., Wygladacz K., Sek S., Bilewicz R., Brzózka Z., Malinowska E. Studies on ferrocene organothiol monolayer as an intermediate phase of potentiometric sensors with gold inner contact. Sens. Actuators B 2005, 111-112:310-316.
40. Gabrielli C., Hémery P., Liatsi P., Masure M., Perrot H. An electrogravimetric study of an all-solid-state potassium selective electrode with prussian blue as the electroactive solid internal contact. J. Electrochem. Soc 2005, 152:H219-H224.
41. -) anions doped nanocluster films. Anal. Chem 2012, 84:3480-3483.
42. Zou X.U., Cheong J.H., Taitt B.J., Bühlmann P. Solid contact ion-selective electrodes with a well-controlled Co(II)/Co(III) redox buffer layer. Anal. Chem 2013, 85:9350-9355.
43. Zou X.U., Zhen X.V., Cheong J.H., Bühlmann P. Calibration-free ionophore-based ion-selective electrodes with a Co(II)/Co(III) redox couple-based solid contact. Anal. Chem 2014, 86:8687-8692.
44. Sharp M., Johansson G. Ion-selective electrodes based on 7,7,8,8-tetracyanoquinodimethane-radical salts. Anal. Chim. Acta 1971, 54:13-21.
45. + electrodes. Anal. Chem 2015, 87:1718-1725.
46. Piek M., Piech R., Paczosa-Bator B. Improved nitrate sensing using solid contact ion selective electrodes based on TTF and its radical salt. J. Electrochem. Soc 2015, 162:B257-B263.
47. Crespo G.A., Macho S., Bobacka J., Rius F.X. Transduction mechanism of carbon nanotubes in solid-contact ion-selective electrodes. Anal. Chem 2008, 81:676-681.
48. Ruzicka J., Rald K. The liquid-state, iodide-selective electrode. Anal. Chim. Acta 1971, 53:1-12.
49. Ruzicka J., Lamm C.G., Tjell J.C. Selectrode-the universal ion-selective electrode: part III. Concept, constructions and materials. Anal. Chim. Acta 1972, 62:15-28.
50. Vamvakaki M., Chaniotakis N.A. Solid-contact ion-selective electrode with stable internal electrode. Anal. Chim. Acta 1996, 320:53-61.
51. Chaniotakis N.A., West S.J. Solid contact ion-selective electrode 1998, U.S. Patent; 5,840,168.
52. Lai C.-Z., Fierke M.A., Stein A., Bühlmann P. Ion-selective electrodes with three-dimensionally ordered macroporous carbon as the solid contact. Anal. Chem 2007, 79:4621-4626.
53. Crespo G.A., Macho S., Rius F.X. Ion-selective electrodes using carbon nanotubes as ion-to-electron transducers. Anal. Chem 2008, 80:1316-1322.
54. Fouskaki M., Chaniotakis N. Fullerene-based electrochemical buffer layer for ion-selective electrodes. Analyst 2008, 133:1072-1075.
55. 60 as solid contact. Anal. Chim. Acta 2015, 876:49-54.
56. Ping J., Wang Y., Wu J., Ying Y. Development of an all-solid-state potassium ion-selective electrode using graphene as the solid-contact transducer. Electrochem. Commun 2011, 13:1529-1532.
57. Hernández R., Riu J., Bobacka J., Vallés C., Jiménez P., Benito A.M., et al. Reduced graphene oxide films as solid transducers in potentiometric all-solid-state ion-selective electrodes. J. Phys. Chem. C 2012, 116:22570-22578.
58. Li F., Ye J., Zhou M., Gan S., Zhang Q., Han D., et al. All-solid-state Potassium-selective electrode using graphene as the solid contact. Analyst 2012, 137:618-623.
59. +. Adv. Healthcare Mater 2014, 3:876-881.
60. Hu J., Zou X.U., Stein A., Bühlmann P. Ion-selective electrodes with colloid-imprinted mesoporous carbon as solid contact. Anal. Chem 2014, 86:7111-7118.
61. 2-C dominant porous carbon sub-micrometer spheres as solid transducers in ion-selective electrodes. Electrochem. Commun 2015, 50:60-63.
62. Walcarius A., Kuhn A. Ordered porous thin films in electrochemical analysis. TrAC, Trends Anal. Chem 2008, 27:593-603.
63. Walcarius A. Mesoporous materials and electrochemistry. Chem. Soc. Rev 2013, 42:4098-4140.
64. Jaworska E., Wójcik M., Kisiel A., Mieczkowski J., Michalska A. Gold nanoparticles solid contact for ion-selective electrodes of highly stable potential readings. Talanta 2011, 85:1986-1989.
65. Paczosa-Bator B., Cabaj L., Piech R., Skupień K. Potentiometric sensors with carbon black supporting platinum nanoparticles. Anal. Chem 2013, 85:10255-10261.
66. Yin T., Pan D., Qin W. All-solid-state polymeric membrane ion-selective miniaturized electrodes based on a nanoporous gold film as solid contact. Anal. Chem 2014, 86:11038-11044.
67. Dohner R.E., Wegmann D., Morf W.E., Simon W. Reference electrode with free-flowing free-diffusion liquid junction. Anal. Chem 1986, 58:2585-2589.
68. Mousavi M.P.S., Bühlmann P. Reference electrodes with salt bridges contained in nanoporous glass: an underappreciated source of error. Anal. Chem 2013, 85:8895-8901.
69. Bakker E. Hydrophobic membranes as liquid junction-free reference electrodes. Electroanalysis 1999, 11:788-792.
70. Kisiel A., Marcisz H., Michalska A., Maksymiuk K. All-solid-state reference electrodes based on conducting polymers. Analyst 2005, 130:1655-1662.
71. Mousavi Z., Granholm K., Sokalski T., Lewenstam A. An analytical quality solid-state composite reference electrode. Analyst 2013, 138:5216-5220.
72. Kakiuchi T., Yoshimatsu T. A new salt bridge based on the hydrophobic room-temperature molten salt. Bull. Chem. Soc. Jpn 2006, 79:1017-1024.
73. Rius-Ruiz F.X., Kisiel A., Michalska A., Maksymiuk K., Riu J., Rius F.X. Solid-state reference electrodes based on carbon nanotubes and polyacrylate membranes. Anal. Bioanal. Chem 2011, 399:3613-3622.
74. Rius-Ruiz F.X., Bejarano-Nosas D., Blondeau P., Riu J., Rius F.X. Disposable planar reference electrode based on carbon nanotubes and polyacrylate membrane. Anal. Chem 2011, 83:5783-5788.
75. Ping J., Wang Y., Fan K., Tang W., Wu J., Ying Y. High-performance flexible potentiometric sensing devices using free-standing graphene paper. J. Mater. Chem. B 2013, 1:4781-4791.
76. Cicmil D., Anastasova S., Kavanagh A., Diamond D., Mattinen U., Bobacka J., et al. Ionic liquid-based, liquid-junction-free reference electrode. Electroanalysis 2011, 23:1881-1890.
77. Zhang T., Lai C.-Z., Fierke M.A., Stein A., Bühlmann P. Advantages and limitations of reference electrodes with an ionic liquid junction and three-dimensionally ordered macroporous carbon as solid contact. Anal. Chem 2012, 84:7771-7778.
78. Hu J., Ho K.T., Zou X.U., Smyrl W.H., Stein A., Bühlmann P. All-Solid-state reference electrodes based on colloid-imprinted mesoporous carbon and their application in disposable paper-based potentiometric sensing devices. Anal. Chem 2015, 87:2981-2987.
79. Zou X.U., Chen L.D., Lai C.-Z., Bühlmann P. Ionic liquid reference electrodes with a well-controlled Co(II)/Co(III) redox buffer as solid contact. Electroanalysis 2015, 27:602-608.
80. Inzelt G., Lewenstam A., Scholz F. Handbook of Reference Electrodes 2013, Springer-Verlag, Berlin Heidelberg.
81. Laboratory requirements, code of federal regulations 2003, Section 493.931, Title 42.
82. Abad J., Espinosa N., Ferrer P., Garcia-Valverde R., Miguel C., Padilla J., et al. Molecular structure of poly(3-alkyl-thiophenes) investigated by calorimetry and grazing incidence X-ray scattering. Sol. Energy Mater. Sol. Cells 2012, 97:109-118.
83. Csahok E., Vieil E., Inzelt G. In situ DC conductivity study of the redox transformations and relaxation of polyaniline films. J. Electroanal. Chem 2000, 482:168-177.
84. 3-doped poly(3-octylthiophene). J. Polym. Res 1997, 4:261-265.
85. Vorotyntsev M.A., Heinze J. Charging process in electron conducting polymers: dimerization model. Electrochim. Acta 2001, 46:3309-3324.
86. Kobashi M., Takeuchi H. Inhomogeneity of spin-coated and cast non-regioregular poly(3-hexylthiophene) films. Structures and electrical and photophysical properties. Macromolecules 1998, 31:7273-7278.
87. Lindfors T., Szücs J., Sundfors F., Gyurcsányi R.E. Polyaniline nanoparticle-based solid-contact silicone rubber ion-selective electrodes for ultratrace measurements. Anal. Chem 2010, 82:9425-9432.
88. Vanamo U., Bobacka J. Electrochemical control of the standard potential of solid-contact ion-selective electrodes having a conducting polymer as ion-to-electron transducer. Electrochim. Acta 2014, 122:316-321.
89. Vanamo U., Bobacka J. Instrument-free control of the standard potential of potentiometric solid-contact ion-selective electrodes by short-circuiting with a conventional reference electrode. Anal. Chem 2014, 86:10540-10545.
90. de Levie R. Redox buffer strength. J. Chem. Educ 1999, 76:574.
91. Zou X.U., Zhen X.V., Hu J., Stein A., Bühlmann P. Lipophilic redox buffers with solvent polymeric solid-contact electrodes (and reference electrodes), 48th Heyrovský Discussion 2015, Progress in Electrochemistry at Liquid-Liquid Interfaces and Liquid Membranes, Třešť, Czech Republic; June 14-19.
92. Fierke M.A., Lai C.-Z., Bühlmann P., Stein A. Effects of architecture and surface chemistry of three-dimensionally ordered macroporous carbon solid contacts on performance of ion-selective electrodes. Anal. Chem 2010, 82:680-688.
93. Sun Q., Li W., Su B. Highly hydrophobic solid contact based on graphene-hybrid nanocomposites for all solid state potentiometric sensors with well-formulated phase boundary potentials. J. Electroanal. Chem 2015, 740:21-27.
94. Guzinski M., Jarvis J.M., Pendley B.D., Lindner E. Equilibration time of solid contact ion-selective electrodes. Anal. Chem 2015, 87:6654-6659.
95. 2O distribution in ion-selective membranes. Sens. Actuators B 1990, 1:275-280.
96. Chan A.D.C., Harrison D.J. NMR study of the state of water in ion-selective electrode membranes. Anal. Chem 1993, 65:32-36.
97. Fibbioli M., Morf W.E., Badertscher M., de Rooij N.F., Pretsch E. Potential drifts of solid-contacted ion-selective electrodes due to zero-current ion fluxes through the sensor membrane. Electroanalysis 2000, 12:1286-1292.
98. De Marco R., Veder J.-P., Clarke G., Nelson A., Prince K., Pretsch E., et al. Evidence of a water layer in solid-contact polymeric ion sensors. Phys. Chem. Chem. Phys 2008, 10:73-76.
99. Sundfors F., Lindfors T., Höfler L., Bereczki R., Gyurcsányi R.E. FTIR-ATR Study of water uptake and diffusion through ion-selective membranes based on poly(acrylates) and silicone rubber. Anal. Chem 2009, 81:5925-5934.
100. Lindfors T., Sundfors F., Höfler L., Gyurcsányi R.E. FTIR-ATR study of water uptake and diffusion through ion-selective membranes based on plasticized poly(vinyl chloride). Electroanalysis 2009, 21:1914-1922.
101. He N., Lindfors T. Determination of water uptake of polymeric ion-selective membranes with the coulometric karl fischer and FT-IR-attenuated total reflection techniques. Anal. Chem 2013, 85:1006-1012.
102. Appiah-Kusi C., Kew S.J., Hall E. Water transport in poly(n-butyl acrylate) ion-selective membranes. Electroanalysis 2009, 21:1992-2003.
103. Veder J.-P., De Marco R., Clarke G., Chester R., Nelson A., Prince K., et al. Elimination of undesirable water layers in solid-contact polymeric ion-selective electrodes. Anal. Chem 2008, 80:6731-6740.
104. Veder J.-P., Patel K., Clarke G., Grygolowicz-Pawlak E., Silvester D.S., De Marco R., et al. Synchrotron radiation/fourier transform-infrared microspectroscopy study of undesirable water inclusions in solid-contact polymeric ion-selective electrodes. Anal. Chem 2010, 82:6203-6207.
105. Lindfors T., Höfler L., Jágerszki G., Gyurcsányi R.E. Hyphenated FT-IR-attenuated total reflection and electrochemical impedance spectroscopy technique to study the water uptake and potential stability of polymeric solid-contact ion-selective electrodes. Anal. Chem 2011, 83:4902-4908.
106. 2+-selective pvc-membrane electrode with a nanomolar detection limit. Anal. Bioanal. Chem 2004, 380:7-14.
107. Ampurdanés J., Crespo G.A., Maroto A., Sarmentero M.A., Ballester P., Rius F.X. Determination of choline and derivatives with a solid-contact ion-selective electrode based on octaamide cavitand and crbon nanotubes. Biosens. Bioelectron 2009, 25:344-349.
108. Hernandez R., Riu J., Rius F.X. Determination of calcium ion in sap using carbon nanotube-based ion-selective electrodes. Analyst 2010, 135:1979-1985.
109. Gyurcsányi R.E., Rangisetty N., Clifton S., Pendley B.D., Lindner E. Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts. Talanta 2004, 63:89-99.
110. Yuan D., Anthis A.H., Ghahraman Afshar M., Pankratova N., Cuartero M., Crespo G.A., et al. All-solid-state potentiometric sensors with a multiwalled carbon nanotube inner transducing layer for anion detection in environmental samples. Anal. Chem 2015, 87:8640-8645.
111. Lindner E., Cosofret V.V., Ufer S., Buck R.P., Kusy R.P., Ash R.B., et al. Flexible (kapton-based) microsensor arrays of high stability for cardiovascular applications. J. Chem. Soc. Faraday Trans 1993, 89:361-367.
112. Lindfors T. Light sensitivity and potential stability of electrically conducting polymers commonly used in solid contact ion-selective electrodes. J. Solid State Electrochem 2009, 13:77-89.
113. Kankare J., Vinokurov I.A. Potentiometric response of conducting polymer electrodes for oxygen in neutral aqueous solutions. Anal. Chem 1997, 69:2337-2342.
114. Vázquez M., Bobacka J., Ivaska A., Lewenstam A. Influence of oxygen and carbon dioxide on the electrochemical stability of poly(3,4-ethylenedioxythiophene) used as ion-to-electron transducer in all-solid-state ion-selective electrodes. Sens. Actuators B 2002, 82:7-13.
115. Sokalski T., Ceresa A., Zwickl T., Pretsch E. Large improvement of the lower detection limit of ion-selective polymer membrane electrodes. J. Am. Chem. Soc 1997, 119:11347-11348.
116. Bühlmann P., Yajima S., Tohda K., Umezawa K., Nishizawa S., Umezawa Y. Studies on the phase boundaries and the significance of ionic sites of liquid membrane ion-selective electrodes. Electroanalysis 1995, 7:811-816.
117. Michalska A., Konopka A., Maj-Zurawska M. All-solid-state calcium solvent polymeric membrane electrode for low-level concentration measurements. Anal. Chem 2003, 75:141-144.
118. Konopka A., Sokalski T., Michalska A., Lewenstam A., Maj-Zurawska M. Factors affecting the potentiometric response of all-solid-state solvent polymeric membrane calcium-selective electrode for low-level measurements. Anal. Chem 2004, 76:6410-6418.
119. Lindner E., Gyurcsányi R.E., Buck R.P. Tailored transport through ion-selective membranes for improved detection limits and selectivity coefficients. Electroanalysis 1999, 11:695-702.
120. Michalska A., Dumańska J., Maksymiuk K. Lowering the detection limit of ion-selective plastic membrane electrodes with conducting polymer solid contact and conducting polymer potentiometric sensors. Anal. Chem 2003, 75:4964-4974.
121. Bakker E., Pretsch E.P. Advances in Potentiometry, Electroanalytical Chemistry 2011, 1-74. CRC Press.
122. Höfler L., Bedlechowicz I., Vigassy T., Gyurcsányi R.E., Bakker E., Pretsch E. Limitations of current polarization for lowering the detection limit of potentiometric polymeric membrane sensors. Anal. Chem 2009, 81:3592-3599.
123. Sutter J., Radu A., Peper S., Bakker E., Pretsch E. Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range. Anal. Chim. Acta 2004, 523:53-59.
124. Chumbimuni-Torres K.Y., Rubinova N., Radu A., Kubota L.T., Bakker E. Solid contact potentiometric sensors for trace level measurements. Anal. Chem 2006, 78:1318-1322.
125. + using paper-strip ion-selective electrodes. Anal. Chem 2014, 86:7269-7273.
126. Ceresa A., Bakker E., Hattendorf B., Günther D., Pretsch E. Potentiometric polymeric membrane electrodes for measurement of environmental samples at trace levels: new requirements for selectivities and measuring protocols, and comparison with ICPMS. Anal. Chem 2001, 73:343-351.
127. Boswell P.G., Bühlmann P. Fluorous bulk membranes for potentiometric sensors with wide selectivity ranges: observation of exceptionally strong ion pair formation. J. Am. Chem. Soc 2005, 127:8958-8959.
128. Boswell P.G., Szíjjártó C., Jurisch M., Gladysz J.A., Rábai J., Bühlmann P. Fluorophilic ionophores for potentiometric PH determinations with fluorous membranes of exceptional selectivity. Anal. Chem 2008, 80:2084-2090.
129. Lai C.-Z., Fierke M.A., da Costa R.C., Gladysz J.A., Stein A., Bühlmann P. Highly selective detection of silver in the low ppt range with ion-selective electrodes based on ionophore-doped fluorous membranes. Anal. Chem 2010, 82:7634-7640.
130. Chen L.D., Lai C.-Z., Granda L.P., Fierke M.A., Mandal D., Stein A., et al. Fluorous membrane ion-selective electrodes for perfluorinated surfactants: trace-level detection and in situ monitoring of adsorption. Anal. Chem 2013, 85:7471-7477.
131. Lai C.-Z., Joyer M.M., Fierke M.A., Petkovich N.D., Stein A., Bühlmann P. Subnanomolar detection limit application of ion-selective electrodes with three-dimensionally ordered macroporous (3DOM) carbon solid contacts. J. Solid State Electrochem 2009, 13:123-128.
132. 2+-selective electrode with a low detection limit. Sens. Actuators B 2011, 155:919-922.
133. Guziński M., Lisak G., Sokalski T., Bobacka J., Ivaska A., Bocheńska M., et al. Solid-contact ion-selective electrodes with highly selective thioamide derivatives of p-tert-butylcalix[4]arene for the determination of lead(II) in environmental samples. Anal. Chem 2013, 85:1555-1561.
134. Mendecki L., Fayose T., Stockmal K.A., Wei J., Granados-Focil S., McGraw C.M., et al. Robust and ultrasensitive polymer membrane-based carbonate-selective electrodes. Anal. Chem 2015, 87:7515-7518.
135. Gyurcsanyi R.E., Nyback A.-S., Ivaska A., Toth K., Nagy G. Novel polypyrrole based all-solid-state potassium-selective microelectrodes. Analyst 1998, 123:1339-1344.
136. Hayashi K., Yamanaka M., Toko K., Yamafuji K. Multichannel taste sensor using lipid membranes. Sens. Actuators B 1990, 2:205-213.
137. Lvova L., Kim S.S., Legin A., Vlasov Y., Yang J.S., Cha G.S., et al. All-solid-state electronic tongue and its application for beverage analysis. Anal. Chim. Acta 2002, 468:303-314.
138. Walter B. Dry reagent chemistries. Anal. Chem 1983, 55:498A-514A.
139. Rius-Ruiz F.X., Crespo G.A., Bejarano-Nosas D., Blondeau P., Riu J., Rius F.X. Potentiometric strip cell based on carbon nanotubes as transducer layer: toward low-cost decentralized measurements. Anal. Chem 2011, 83:8810-8815.
140. Novell M., Parrilla M., Crespo G.A., Rius F.X., Andrade F.J. Paper-based ion-selective potentiometric sensors. Anal. Chem 2012, 84:4695-4702.
141. Cuartero M., del Río J.S., Blondeau P., Ortuño J.A., Rius F.X., Andrade F.J. Rubber-based substrates modified with carbon nanotubes inks to build flexible electrochemical sensors. Anal. Chim. Acta 2014, 827:95-102.
142. Novell M., Guinovart T., Blondeau P., Rius F.X., Andrade F.J. A paper-based potentiometric cell for decentralized monitoring of li levels in whole blood. Lab Chip 2014, 14:1308-1314.
143. Martinez A.W., Phillips S.T., Butte M.J., Whitesides G.M. Patterned paper as a platform for inexpensive, low-volume, portable bioassays. Angew. Chem., Int. Ed 2007, 46:1318-1320.
144. Szucs J., Gyurcsányi R.E. Towards protein assays on paper platforms with potentiometric detection. Electroanalysis 2012, 24:146-152.
145. Cui J., Lisak G., Strzalkowska S., Bobacka J. Potentiometric sensing utilizing paper-based microfluidic sampling. Analyst 2014, 139:2133-2136.
146. Lisak G., Cui J., Bobacka J. Paper-based microfluidic sampling for potentiometric determination of ions. Sens. Actuators B 2015, 207:933-939.
147. Lan W.-J., Zou X.U., Hamedi M.M., Hu J., Parolo C., Maxwell E.J., et al. Paper-based potentiometric ion sensing. Anal. Chem 2014, 86:9548-9553.
148. Cuartero M., Crespo G.A., Bakker E. Paper-based thin-layer coulometric sensor for halide determination. Anal. Chem 2015, 87:1981-1990.
149. Kofler J., Nau S., List-Kratochvil E.J.W. A paper based, all organic, reference-electrode-free ion sensing platform. J. Mater. Chem. B 2015, 3:5095-5102.
150. Wang X., Qin Y., Meyerhoff M.E. Paper-based plasticizer-free sodium ion-selective sensor with camera phone as a detector. Chem. Commun 2015, 51:15176-15179.