From 3D sensing to printing: A survey

ACM Transactions on Multimedia Computing, Communications and Applications

Volumn 12, Issue 2, 2015, Pages

  Zhang, Longyu ^a   Dong, Haiwei ^a   El Saddik, Abdulmotaleb ^a  

^a UNIVERSITY OF OTTAWA   (Canada)

Author keywords

3D model reconstruction; 3D printers; 3D sensing technologies

Indexed keywords

3D MODELING; PIPELINES; PRINTING PRESSES; THREE DIMENSIONAL COMPUTER GRAPHICS;

3-D SENSING; 3D MODEL RECONSTRUCTION; COMMERCIAL DEPLOYMENT; POTENTIAL RISKS; PRINTING TECHNIQUES; PRINTING TECHNOLOGIES; RESEARCH TRENDS; THREEDIMENSIONAL (3-D);

3D PRINTERS;

EID: 84946043444     PISSN: 15516857     EISSN: 15516865     Source Type: Journal    
DOI: 10.1145/2818710     Document Type: Review

References (111)

1. Mai Adm and Abas Said. 2012. Interactive image-based 3D modeling. In Proceedings of International Conference on Computer & Information Science. 1000-1005.
2. SungHoon Ahn, Michael Montero, Dan Odell, Shad Roundy, and Paul Wright. 2002. Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyping Journal 8(2002), 248-257.
3. Brett Allen, Brian Curless, and Zoran Popović. 2003. The space of human body shapes: Reconstruction and parameterization from range scans. ACM Transactions on Graphics 22(2003), 587-594.
4. Dean Anderson, Herman Herman, and Alonzo Kelly. 2005. Experimental characterization of commercial flash ladar devices. In Proceedings of International Conference of Sensing and Technology. 17-23.
5. Luigi Barazzetti, Marco Scaioni, and Fabio Remondino. 2010. Orientation and 3D modelling from markerless terrestrial images: Combining accuracy with automation. Photogrammetric Record 25(2010), 356-381.
6. Mark Beard, Oana Ghita, and Ken Evans. 2011. Using Raman spectroscopy to monitor surface finish and roughness of components manufactured by selective laser sintering. Journal of Raman Spectroscopy 42(2011), 744-748.
7. Thabo Beeler, Bernd Bickel, Paul Beardsley, Bob Sumner, and Markus Gross. 2010. High-quality single-shot capture of facial geometry. ACM Transactions on Graphics 29(2010), 40:1-40:9.
8. Paul Besl and Neil McKay. 1992. A method for registration of 3-D shapes. IEEE Transactions on Pattern Analysis and Machine Intelligence 14(1992), 239-256.
9. François Blais. 2004. Review of 20 years of range sensor development. Journal of Electronic Imaging 13(2004), 231-243.
10. Don Brutzman and Leonard Daly. 2010. X3D: Extensible 3D Graphics for Web Authors. Morgan Kaufmann.
11. Thomas Campbell, Christopher Williams, Olga Ivanova, and Banning Garrett. 2011. Could 3D printing change the world? In Proceedings of Technologies, Potential, and Implications of Additive Manufacturing. 1-14.
12. Avishek Chatterjee, Suraj Jain, and Venu Madhav Govindu. 2012. A pipeline for building 3D models using depth cameras. In Proceedings of the 8th Indian Conference on Computer Vision, Graphics and Image Processing. 38:1-38.8.
13. Desai Chen, David Levin, Piotr Didyk, Pitchaya Sitthi-Amorn, and Wojciech Matusik. 2013. Spec2Fab: A reducer-tuner model for translating specifications to 3D prints. ACM Transactions on Graphics 32(2013), 135:1-135:10.
14. Yang Chen and Gérard Medioni. 1992. Object modelling by registration of multiple range images. Image and Vision Computing 10(1992), 145-155.
15. Edward Ciaccio, Christina Tennyson, Govind Bhagat, Suzanne Lewis, and Peter Green. 2013. Use of shapefrom-shading to estimate three-dimensional architecture in the small intestinal lumen of celiac and control patients. Computer Methods and Programs in Biomedicine 111(2013), 676-684.
16. Laura Clemente, Andrew Davison, Ian Reid, José Neira, and Juan Tardós. 2007. Mapping large loops with a single hand-held camera. In Proceedings of the Robotics: Science and Systems Conference.
17. Creatform. 2015. Creatform MetraSCAN 210. (2015). Retrieved February 26, 2015, from http://www.creaform3d.com/en.
18. Yan Cui, Sebastian Schuon, Derek Chan, Sebastian Thrun, and Christian Theobalt. 2010. 3D shape scanning with a time-of-flight camera. In Proceedings of IEEE Conference on Computer Vision and Pattern Recognition. 1173-1180.
19. Yan Cui, Sebastian Schuon, Sebastian Thrun, Didier Stricker, and Christian Theobalt. 2013. Algorithms for 3D shape scanning with a depth camera. IEEE Transactions on Pattern Analysis and Machine Intelligence 35(2013), 1039-1050.
20. Cyberware. 2015. Cyberware whole body color 3D scanner bundle. (2015). Retrieved February 26, 2015, from http://cyberware.com/pricing/domest-icPriceList.html.
21. Leonardo De Chiffre, Simone Carmignato, Jean-Pierre Kruth, Robert Schmitt, and Albert Weckenmann. 2014. Industrial applications of computed tomography. Manufacturing Technology 63(2014), 655-677.
22. Ryan Dehoff, Chad Duty, William Peter, Yukinori Yamamoto, Wei Chen, Craig Blue, and Cory Tallman. 2013. Case study: Additive manufacturing of aerospace brackets. Advanced Materials & Processes 171(2013), 19-22.
23. Jose Echevarria, Derek Bradley, Diego Gutierrez, and Thabo Beeler. 2014. Capturing and stylizing hair for 3D fabrication. ACM Transactions on Graphics 33(2014), 125:1-125:11.
24. Stephen Ellerin. 2004. The art and science of 3D printing. Emedia 17(2004), 14.
25. EosSystems. 2015. Photomodeler. (2015). Retrieved February 26, 2015, from http://www.photomodeler.com/index.html.
26. Jacques Feldmar and Nicholas Ayache. 1996. Rigid, affine and locally affine registration of free-form surfaces. International Journal of Computer Vision 18(1996), 99-119.
27. Nadia Figueroa, Haiwei Dong, and Abdulmotaleb El Saddik. 2013. From sense to print: Towards automatic 3D printing from 3D sensing devices. In Proceedings of IEEE International Conference on Systems, Man, and Cybernetics. 4897-4904.
28. Timothy Fish. 2011. Extending Art of Illusion: A Reference for Creating Plugins and Scripts. Timothy Fish.
29. Yasutaka Furukawa and Jean Ponce. 2010. Accurate, dense, and robust multiview stereopsis. IEEE Transactions on Pattern Analysis and Machine Intelligence 32(2010), 1362-1376.
30. Gartner. 2015. Cool Vendors in 3D Printing. (2015). Retrieved February26, 2015, from https://www.gartner.com/doc/2471215/cool-vendors-d-printing.
31. Burak Gokturk, Hakan Yalcin, and Cyrus Bamji. 2004. A time-of-flight depth sensor-system description, issues and solutions. In Proceedings of Computer Vision and Pattern Recognition Workshop. 35-35.
32. Leonardo Gomes, Olga Bellon, and Luciano Silva. 2014. 3D reconstruction methods for digital preservation of cultural heritage: A survey. Pattern Recognition Letters 50(2014), 3-14.
33. Eli Greenbaum. 2013. Three-dimensional printing and open source hardware. Journal of Intellectual Property and Entertainment Law at New York University 2(2013), 257-369.
34. Alper Hacioʇlu. 2014. GNU-General Public License.
35. Miles Hansard, Seungkyu Lee, Ouk Choi, and Radu Patrice Horaud. 2012. Time-of-Flight Cameras: Principles, Methods and Applications. Springer Science & Business Media.
36. Peter Henry, Michael Krainin, Evan Herbst, Xiaofeng Ren, and Dieter Fox. 2014. RGB-D mapping: Using depth cameras for dense 3D modeling of indoor environments. In Proceedings of Experimental Robotics. 477-491.
37. Joan Horvath. 2014. A brief history of 3D printing. In Mastering 3D Printing. Springer, Berlin, 3-10.
38. Cətəlin Iancu, Daniela Iancu, and Alin Stəncioiu. 2010. From CAD model to 3D print via "STL" file format. Fiability & Durability 1(2010), 73-80.
39. Katsushi Ikeuchi. 2001. Modeling from reality. In Proceedings of the 3rd IEEE International Conference on 3-D Digital Imaging and Modeling. 117-124.
40. i.materialise. 2015. i.materialise. (2015). Retrieved February26, 2015, from http://i.materialise.com/.
41. Shahram Izadi, David Kim, Otmar Hilliges, David Molyneaux, Richard Newcombe, Pushmeet Kohli, Jamie Shotton, Steve Hodges, Dustin Freeman, Andrew Davison, and Andrew Fitzgibbon. 2011. KinectFusion: Real-time 3D reconstruction and interaction using a moving depth camera. In Proceedings of the 24th Annual ACM Symposium on User Interface Software and Technology. 559-568.
42. Bahram Javidi, Myungiin Cho, Inkyu Moon, Arun Anand, Manuel Martinez-Corral, Adrian Stern, Abhijit Mahalanobis, and Zeev Zalevsky. 2013. 3D imaging and visualization: An overview of recent advances. In Proceedings of Workshop on Information Optics. 1-3.
43. Yunsuk Kang and Yosung Ho. 2010. High-quality multi-view depth generation using multiple color and depth cameras. In Proceedings of IEEE International Conference on Multimedia and Expo. 1405-1410.
44. Hadi Kaveh, Mohammad-Shahram Moin, and Farbod Razzazi. 2013. A novel steganography approach for 3D polygonal meshes using surfacelet transform. In Proceedings of the 8th Iranian Conference on Machine Vision and Image Processing. 304-309.
45. Michael Kazhdan, Matthew Bolitho, and Hugues Hoppe. 2006. Poisson surface reconstruction. In Proceedings of the 4th Eurographics Symposium on Geometry Processing.
46. Richard Ketcham and William Carlson. 2001. Acquisition, optimization and interpretation of X-ray computed tomographic imagery: Applications to the geosciences. Computers & Geosciences 27(2001), 381-400.
47. Kourosh Khoshelham and Sander Oude Elberink. 2012. Accuracy and resolution of kinect depth data for indoor mapping applications. Sensors 12(2012), 1437-1454.
48. Kinect. 2010. Kinect v1. (2010). Retrieved February 26, 2015, from http://www.microsoft.com/en-us/kinectforwindows/.
49. Ahmed Kirmani, Arrigo Benedetti, and Philip A. Chou. 2013. Spumic: Simultaneous phase unwrapping and multipath interference cancellation in time-of-flight cameras using spectral methods. In Proceedings of IEEE International Conference on Multimedia and Expo. 1-6.
50. Andreas Kolb, Erhardt Barth, Reinhard Koch, and Rasmus Larsen. 2009. Time-of-flight sensors in computer graphics. In Proceedings of Eurographics (State-of-the-Art Report). 119-134.
51. Jean Pierre Kruth, Markus Bartscher, Simone Carmignato, Robert Schmitt, Leonardo De Chiffre, and Albert Weckenmann. 2011. Computed tomography for dimensional metrology. Manufacturing Technology 60(2011), 821-842.
52. Robert Lange and Peter Seitz. 2001. Solid-state time-of-flight range camera. IEEE Journal of Quantum Electronics 37(2001), 390-397.
53. Marc Levoy, Kari Pulli, Brian Curless, Szymon Rusinkiewicz, David Koller, Lucas Pereira, Matt Ginzton, Sean Anderson, James Davis, Jeremy Ginsberg, et al. 2000. The digital Michelangelo project: 3D scanningoflarge statues. InProceedings of the 27th Annual Conference on Computer Graphics and Interactive Techniques. 131-144.
54. Hod Lipson and Melba Kurman. 2013. Fabricated: The New World of 3D Printing. John Wiley & Sons.
55. Hod Lipson, Francis C. Moon, Jimmy Hai, and Carlo Paventi. 2005. 3-D printing the history of mechanisms. Journal of Mechanical Design 127(2005), 1029-1033.
56. Kai Liu, Yongchang Wang, Daniel Lau, Qi Hao, and Laurence Hassebrook. 2010a. Dual-frequency pattern scheme for high-speed 3-D shape measurement. Optics Express 18(2010), 5229-5244.
57. Kai Liu, Yongchang Wang, Daniel Lau, Qi Hao, and Laurence Hassebrook. 2010b. Gamma model and its analysis for phase measuring profilometry. Journal of the Optical Society of America A 27(2010), 553-562.
58. Shoubin Liu and Wenguang Niu. 2012. A novel algorithm for segmentation of complex point cloud with 3D elastic model. In Proceedings of International Conference on Computer Science and Automation Engineering. 407-411.
59. Diego Manfredi, Flaviana Calignano, Manickavasagam Krishnan, Riccardo Canali, Elisa Paola Ambrosio, and Eleonora Atzeni. 2013. From powders to dense metal parts: Characterization of a commercial AlSiMg alloy processed through direct metal laser sintering. Materials 6(2013), 856-869.
60. Julie Marcoux and Kenneth-Roy Bonin. 2012. Three dimensional printing: An introduction for information professionals. In Proceedings of the 6th International Conference on Digital Society. 54-58.
61. Primoz Markelj, Dejan Tomaževič, Bostjan Likar, and Franjo Pernuš. 2012. A review of 3D/2D registration methods for image-guided interventions. Medical Image Analysis 16(2012), 642-661.
62. MenciSoftware. 2015. Menci. (2015). Retrieved February 26, 2015, from http://www.menci.com/.
63. MESA-Imaging. 2015. SwissRanger 4500. (2015). Retrieved February 26, 2015, from http://www.mesa-imaging.ch/swissranger4500.php.
64. Microsoft. 2015. Microsoft Kinect. (2015). Retrieved February 26, 2015, from http://www.microsoft.com/en-us/kinectforwindows/.
65. Simone Milani and Giancarlo Calvagno. 2011. A cognitive approach for effective coding and transmission of 3D video. ACM Transactions on Multimedia Computing, Communications, and Applications 7S (2011), 23:1-23:21.
66. Tobias Möller, Holger Kraft, Jochen Frey, Martin Albrecht, and Robert Lange. 2005. Robust 3D measurement with Pmd sensors. In Proceedings of the 1st Range Imaging Research Day. 8.
67. Kamran Mumtaz and Neil Hopkinson. 2010. Selective laser melting of thin wall parts using pulse shaping. Journal of Materials Processing Technology 210(2010), 279-287.
68. Richard A. Newcombe, Andrew J. Davison, Shahram Izadi, Pushmeet Kohli, Otmar Hilliges, Jamie Shotton, David Molyneaux, Steve Hodges, David Kim, and Andrew Fitzgibbon. 2011. KinectFusion: Real-time dense surface mapping and tracking. In Proceedings of IEEE International Symposium on Mixed and Augmented Reality. 127-136.
69. North-Star-Imaging. 2015. X-View X5000. (2015). Retrieved February 26, 2015, from http://www.xviewct.com/industrial-ct-systems/x-view-computed-tomography/m5000-series.
70. Rachel Opitz, Katie Simon, Adam Barnes, Kevin Fisher, and Lauren Lippiello. 2012. Close-range photogrammetry vs. 3D scanning: Comparing data capture, processing and model generation in the field and the lab. In Proceedings of Computer Applications and Quantitative Methods in Archaeology Conference.
71. Tong Pan, Xiao Jing Li, Hao Peng Wang, and Ting Ting Liu. 2013. Researchonmethod of 3D models viewpoint control based on VRML. Advanced Materials Research 753(2013), 1283-1286.
72. Narendra Patel and Mukesh Zaveri. 2012. 3D model reconstruction and animation from single view face image. In Proceedings of International Conference on Audio, Language and Image Processing. 674-682.
73. Joshua Pearce, Morris Blair, KI Laciak, Rob Andrews, Amir Nosrat, and Ivana ZelenikaZovko. 2010. 3-D printing of open source appropriate technologies for self-directed sustainable development. Journal of Sustainable Development 3(2010), 17-29.
74. Jeanne Pellerin, Bruno Lévy, Guillaume Caumon, and Arnaud Botella. 2014. Automatic surface remeshing of 3D structural models at specified resolution: A method based on Voronoi diagrams. Computers & Geosciences 62(2014), 103-116.
75. Bre Pettis, Anna Kaziunas France, and Jay Shergill. 2012. Getting Started with MakerBot. O'Reilly Media.
76. Ponoko. 2015. Ponoko. (2015). Retrieved February 26, 2015, from https://www.ponoko.com/.
77. JiannYeou Rau and PoChia Yeh. 2012. A semi-automatic image-based close range 3D modeling pipeline using a multi-camera configuration. Sensors 12(2012), 11271-11293.
78. Fabio Remondino and Sabry El-Hakim. 2006. Image-based 3D modelling: A review. Photogrammetric Record 21(2006), 269-291.
79. Martijn Rooker, Alfred Angerer, Jose Capco, Christoph Heindl, Aitor Olarra, Elena Fuentes, Christian Wögerer, and Andreas Pichler. 2013. Flexible grasping of electronic consumer goods. In Robotics in Smart Manufacturing. Springer, Berlin, 158-169.
80. Joaquim Salvi, Sergio Fernandez, Tomislav Pribanic, and Xavier Llado. 2010. A state of the art in structured light patterns for surface profilometry. Pattern Recognition 43(2010), 2666-2680.
81. Giovanna Sansoni, Marco Trebeschi, and Franco Docchio. 2009. State-of-the-art and applications of 3D imaging sensors in industry, cultural heritage, medicine, and criminal investigation. Sensors 9(2009), 568-601.
82. Sculpteo. 2015. Sculpteo. (2015). Retrieved February 26, 2015, from http://www.sculpteo.com/en/.
83. Henry Segerman. 2012. 3D printing for mathematical visualisation. Mathematical Intelligencer 34(2012), 1-7.
84. Ed Sells, Zach Smith, Sebastien Bailard, Adrian Bowyer, and Vik Olliver. 2009. RepRap: The Replicating Rapid Prototyper - maximizing customizability by breeding the means of production. In Handbook of Research in Mass Customization and Personalization, F. T. Piller and M. M. Tseng (Eds.). Vol. 1. World Scientific, 568-580.
85. Shapesways. 2015. Shapesways. (2015). Retrieved February 26, 2015, from http://www.shapeways.com/.
86. Jamie Shotton, Andrew Fitzgibbon, Mat Cook, Toby Sharp, Mark Finocchio, Richard Moore, Alex Kipman, and Andrew Blake. 2011. Real-time human pose recognition in parts from single depth images. In Proceedings of IEEE Conference on Computer Vision and Pattern Recognition. 129-134.
87. Elizabeth Ann Slavkovsky. 2012. Feasibility Study for Teaching Geometry and Other Topics Using Three-Dimensional Printers. Master's thesis. Harvard University.
88. Jan Smisek, Michal Jancosek, and Tomas Pajdla. 2013. 3D with Kinect. In Consumer Depth Cameras for Computer Vision. Springer, London, 3-25.
89. Elena Stoykova, A. Aydin Alatan, Philip Benzie, Nikolaos Grammalidis, Sotiris Malassiotis, Joern Ostermann, Sergej Piekh, Ventseslav Sainov, Christian Theobalt, Thangavel Thevar, et al. 2007. IEEE Transactions on Circuits and Systems 17(2007), 1568-1586.
90. Jürgen Sturm, Erik Bylow, Fredrik Kahl, and Daniel Cremers. 2013. CopyMe3D: Scanning and printing persons in 3D. In Pattern Recognition. Springer, Berlin, 405-414.
91. 3D Systems. 2015. 3D Systems. (2015). Retrieved February 26, 2015, from www.3dsystems.com.
92. Liangwen Tang, Sheng Yang, Nong Cheng, and Qing Li. 2014. Toward autonomous navigation using an RGB-D camera for flight in unknown indoor environments. In Proceedings of IEEE Chinese Guidance, Navigation and Control Conference. 2007-2012.
93. LMI Technologies. 2015. HDI Advance R3x. (2015). Retrieved February 26, 2015, from http://www.creaform3d.com/en.
94. Jing Tong, Jin Zhou, Ligang Liu, Zhigeng Pan, and Hao Yan. 2012. Scanning 3D full human bodies using kinects. IEEE Transactions on Visualization and Computer Graphics 18(2012), 643-650.
95. Toshiba. 2015. TOSCANER 20000AV. (2015). Retrieved February 26, 2015, from http://www.toshiba-itc.com/cat/en/prod01.html.
96. Ben Utela, Duane Storti, Rhonda Anderson, and Mark Ganter. 2008. A review of process development steps for new material systems in three dimensional printing (3DP). Journal of Manufacturing Processes 10(2008), 96-104.
97. Boštjan Vaupotič, Miran Brezočnik, and Jože Balič. 2006. Use of PolyJet technology in manufacture of new product. Journal of Achievements in Materials and Manufacturing Engineering 18(2006), 1-2.
98. Kiril Vidimče, Szu-Po Wang, Jonathan Ragan-Kelley, and Wojciech Matusik. 2013. OpenFab: A programmable pipeline for multi-material fabrication. ACM Transactions on Graphics 32(2013), 136.
99. Jinfeng Wang and Guoqing Yao. 2011. Obj three-dimensional model file format in OpenGL, input and processing. Computer Knowledge and Technology 10(2011), 068.
100. Jianfeng Wang, Cha Zhang, Wenwu Zhu, Zhengyou Zhang, Zixiang Xiong, and Philip A. Chou. 2012. 3D scene reconstruction by multiple structured-light based commodity depth cameras. In Proceedings of IEEE International Conference on Acoustics, Speech and Signal Processing. 5429-5432.
101. Udaya Wijenayake, SeungHae Baek, and SoonYong Park. 2012. An error correcting 3D scanning technique using dual pseudorandom arrays. In Proceedings of International Conference on 3D Imaging, Modeling, Processing, Visualization and Transmission. 517-523.
102. Karl Willis, Eric Brockmeyer, Scott Hudson, and Ivan Poupyrev. 2012. Printed optics: 3D printing of embedded optical elements for interactive devices. In Proceedings of the 25th Annual ACM Symposium on User Interface Software and Technology. 589-598.
103. Genyuan Xia and Li Chen. 2014. 3D dental mesh repairing using template-based deformation. In Proceedings of the 7th International Conference on Biomedical Engineering and Informatics. 410-414.
104. Lin Yang, Longyu Zhang, Haiwei Dong, Abdulhameed Alelaiwi, and Abdulmotaleb El Saddik. 2015. Evaluating and improving the depth accuracy of Kinect for Windows v2. IEEE Sensors Journal 15(2015), 4275-4285.
105. Klemen Žbontar, Matjaž Mihelj, Boštjan Podobnik, Franc Povše, and Marko Munih. 2013. Dynamic symmetrical pattern projection based laser triangulation sensor for precise surface position measurement of various material types. Applied Optics 52(2013), 2750-2760.
106. Longyu Zhang, Jamal Saboune, and Abdulmotaleb El Saddik. 2014. Transforming a regular screen into a touch screen using a single webcam. Journal of Display Technology 10(2014), 647-659.
107. Zhengyou Zhang. 1994. Iterative point matching for registration of free-form curves and surfaces. International Journal of Computer Vision 13(1994), 119-152.
108. Zheng Zhang and Hock Soon Seah. 2012. CUDA acceleration of 3D dynamic scene reconstruction and 3D motion estimation for motion capture. In Proceedings of International Conference on Parallel and Distributed Systems. 284-291.
109. Yin Zhou, Kai Liu, Jinglun Gao, Kenneth Barner, and Fouad Kiamilev. 2013. High-speed structured light scanning system and 3D gestural point cloud recognition. In Proceedings of IEEE Conference on Information Sciences and Systems. 1-6.
110. Jiejie Zhu, Liang Wang, Ruigang Yang, and James Davis. 2008. Fusion of time-of-flight depth and stereo for high accuracy depth maps. In Proceedings of IEEE Conference on Computer Vision and Pattern Recognition. 1-8.
111. Shiping Zhu and Jie Gao. 2012. 3D modeling and rendering based on uncalibrated single view image in undergraduate final design. In Proceedings of International Conference on Computer Science and Information Processing. 1336-1340.