Rheological properties and processing of polymer blends with micro- and nanofibrillated cellulose

Agricultural Biomass Based Potential Materials

Volumn , Issue , 2015, Pages 259-291

  Taheri, Hesam ^a   Samyn, Pieter ^a  

^a UNIVERSITY OF FREIBURG   (Germany)

Author keywords

Nanofibrillated cellulose; Processing; Rheology; Suspension

Indexed keywords

EID: 84944241435     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-319-13847-3_13     Document Type: Book

References (143)

1. Abdul Khalil APS, Bhat AH, Ireana Yusra AF (2012) Green composites from sustainable cellulose nanofibrils: a review. Carbohydr Polym 87:963-979
2. Agoda-Tandjawa G, Durand S, Berot S, Blassel C, Gaillard C, Garnier C (2010) Rheological characterization of microfibrillated cellulose suspensions after freezing. Carbohydr Polym 80(3):677-686
3. Agoda-Tandjawa G, Durand S, Gaillard C, Garnier C, Doublier JL (2012) Rheological behaviour and microstructure of microfibrillated cellulose suspensions/low-methoxyl pectin mixed systems. Carbohydr Polym 87:1045-1057
4. Ahola S, Myllytie P, Österberg M, Teerinen T, Laine J (2008) Effect of polymer adsorption on cellulose nanofibril water binding capacity and aggregation. Bioresources 3:1315-1328
5. Ajayan PM, Schadler LS, Braun PV (2003) Nanocomposite science and technology. Wiley, Wein-heim
6. Alemdar A, Sain M (2008a) Isolation and characterization of nanofibres from agricultural residues-wheat straw and soy hulls. Bioresour Technol 99:1664-1671
7. Alila S, Besbas I, Vilar MR, Mutjé P, Boufi S (2013) Non-woody plants as raw materials for production of microfibrillated cellulose (MFC): A comparative study. Ind Crops Prod 41:250-259
8. Araki J, Wada M, Kuga S, Okano T (1998) Flow properties of microcrystalline cellulose suspension prepared by acid treatment of native cellulose. Colloid Surf A 142:75-82
9. Barnes HA (1995) A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure. J Non-Newton Fluid Mech 56:221-251
10. Barnes HA (1997) Thixotropy: a review. J Non-Newton Fluid Mech 70:1-33
11. Bendahou A, Kaddami H, Dufresne A (2010) Investigation on the effect of cellulosic nanoparticles’ morphology on the properties of natural rubber based nanocomposites. Eur Polym J 46:609-620
12. Bhattacharya D, Germinario LT, Winter WT (2008) Isolation, preparation and characterization of cellulose microfibers obtained from bagasse. Carbohydr Polym 73(3):371-377
13. Boissard CIR, Bourban PE, Plummer CJG, Neagu RC, Månson JAE (2012) Cellular biocomposites from polylactide and microfibrillated cellulose. J Cellular Plast 48(5):445-458
14. Bulian F, Graystone JA (2009) Properties of wood coatings-testing and characterisation. In: Bulian F, Graystone JA (eds) Wood coatings. Elsevier, Amsterdam, pp 155-194
15. Bulota M, Kreitsmann K, Hughes M, Paltakari J (2012) Acetylated microfibrillated cellulose as toughening agent in polylactic acid. J Appl Polym Sci 126:448-457
16. Celzard A, Fierro V, Kerekes R (2009) Flocculation of cellulose fibers: new comparison of crowding factor with percolation and effective-medium theories. Cellulose 16:983-987
17. Charani PR, Firouzabadi MD, Afra E, Shakeri A (2013) Rheological characterization of high concentrated MFC gel from kenaf unbleached pulp. Cellulose 20:727-740
18. Chen X, Guo Q, Mi Y (1998) Bamboo fiber-reinforced polypropylene composites: a study of the mechanical properties. J Appl Polym Sci 69:1891-1899
19. Cheng DC (1986) Yield stress: a time-dependent property and how to measure it. Rheol Acta 25:542-554
20. Chinga-Carrasco G (2011) Cellulose fibres, nanofibrils and microfibrils: the morphological sequence of MFC components from a plant physiology and fibre technology point of view. Nanoscale Res Lett 6:417
21. Cho SY, Park HH, Yun YS, Jin HJ (2013) Influence of cellulose nanofibers on the morphology and physical properties of poly(lactic acid) foaming by supercritical carbon dioxide. Macromol Res 21(5):529-533
22. Cobut A, Sehaqui H, Berglund LA (2014) Cellulose nanocomposites by melt compounding of TEMPO-treated wood fibers in thermoplastic starch matrix. Bioresources 9(2):3276-3289
23. Cristobal C, Encarnacion R, Ignacio B, Maria JN, Eulogio C (2006) Enhanced enzymatic hydrolysis of olive tree wood by steam explosion and alkaline peroxide delignification. Process Biochem 41:423-429
24. Das M, Chakraborty D (2006) Influence of alkali treatment on the fine structure and morphology of bamboo fibers. J Appl Polym Sci 102:5050-5056
25. Das M, Chakraborty D (2007) Role of mercerization of the bamboo strips on the impact properties and morphology of unidirectional bamboo strips-novolac composites. Polym Compos 28:57-60
26. Das M, Pal A, Chakraborty D (2006) Effects of mercerization of bamboo strips on mechanical properties of unidirectional bamboo-novolac composites. J Appl Polym Sci 100:238-244
27. Dealy M, Wissbrun KF (1999) Melt rheology and its role in plastic processing theory and application. Kluwer, Dordrecht
28. Derakhshandeh B, Hatzikiriakos SG, Bennington CPJ (2010) The apparent yield stress of pulp fiber suspensions. J Rheol 54:1137-1154
29. Dhont JKG, Briels WJ (2003) Viscoelasticity of suspensions of long, rigid rods. Colloid Surf A 213:131-156
30. Dinand E, Chanzy H, Vignon MR (1996) Parenchymal cell cellulose from sugar beet pulp: preparation and properties. Cellulose 3:183-188
31. Diotallevi F, Mulder B (2007) The cellulose synthase complex: a polymerization driven supramolecular motor. Biophys J 92:2666-2673
32. Djafari Petroudy SR, Syverud K, Chinga-Carrasco G, Ghasemain A, Resalati H (2014) Effects of bagasse microfibrillated cellulose and cationic polyacrylamide on key properties of bagasse paper. Carbohydr Polym 99:311-318
33. Duan X, Xu J, He B, Li J, Sun Y (2011) Preparation and rheological properties of cellulose/chitosan homogeneous solution in ionic liquid. Bioresources 6(4):4640-4651
34. Duanmu J, Gamstedt EK, Rosling A (2012) Bulk composites from microfibrillated cellulose-reinforced thermoset starch made from enzymatically degraded allyl glycidyl ether-modified starch. J Compos Mater 46:3201-3208
35. Dufresne A (2010) Processing of polymer nanocomposites reinforced with polysaccharide nano-crystals. Molecules 15:4111-4128
36. Dufresne A (2012) Nanocellulose from nature to high performance tailored materials. Walter de Gruyter, Berlin
37. Ferreira AM, Carvalho AJF (2014) TPS nanocomposite reinforced by MFC by melting process. Materials Research (in press)
38. Fortunato G, Zimmermann T, Lübben J, Bordeanu N, Hufenus R (2012) Reinforcement of polymeric submicrometer-sized fibers by microfibrillated cellulose. Macromol Mater Eng 297:576-584
39. Frenot A, Henriksson MW, Walkenström P (2007) Electrospinning of cellulose-based nanofibers. J Appl Polym Sci 103(3):1473-1482
40. Fujisawa S, Okita Y, Fukuzumi H, Saito T, Isodai A (2011) Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups. Carbohydr Polym 84:579-583
41. Goffin AL, Raquez JM, Duquesne E, Siqueira G, Habibi Y, Dufresne A, Dubois Ph (2011) Poly(∈-caprolactone) based nanocomposites reinforced by surface-grafted cellulose nanowhiskers via extrusion processing: morphology, rheology, and thermo-mechanical properties. Polymer 52:1532-1538
42. Goldsmith HL, Mason SG (1967) The microrheology of dispersions. In: Eirich FR (ed) Rheology: theory and applications, vol 4. Academic Press, New York, pp 85-250
43. Goussé C, Chanzy H, Cerrada ML, Fleury E (2004) Surface silylation of cellulose microfibtrils: preparation and rheological properties. Polymer 45:1569-1575
44. Grüneberger F, Kunniger T, Zimmermann T, Arnold M (2014) Rheology of nanofibrillated cellulose/acrylate systems for coating applications. Cellulose 21:1313-1326
45. Haavisto S, Liukkonen J, Jäsberg A, Koponen A, Lille M, Salmela J (2011) Laboratory-scale pipe rheometry: a study of microfibrillated cellulose suspensions. Proc Papercon 2011:704-717
46. Haavisto S, Koponen A, Salmela J (2014) New insight into rheology and flow properties of complex fluids with Doppler optical coherence tomography. Front Chem 27:1-6
47. Habibi Y, Vignon MR (2007) Optimization of cellouronic acid synthesis by TEMPO-mediated oxidation of cellulose III from sugar beet pulp. Cellulose 15(1):177-185
48. Han SO, Son WK, Youk JH, Park WH (2008) Electrospinning of ultrafine cellulose fibers and fabrication of poly(butylene succinate) biocomposites reinforced by them. J Appl Polym Sci 107(3):1954-1959
49. Härdelin L, Thunberg J, Perzon E, Westman G, Walkenström P, Gatenholm P (2011) Electros-pinning of cellulose nanofibers from ionic liquids: The effect of different cosolvents. J Appl Polym Sci 125:1901-1909. doi:10.1002/app.36323
50. Hassan ML, Hassan EA, Oksman KN (2011) Effect of pretreatment of bagasse fibers on the properties of chitosan/microfibrillated cellulose nanocomposites. J Mater Sci 46:1732-1740
51. Herrick FW, Casebier RL, Hamilton JK, Sandberg KR (1983) Microfibrillat cellulose: morphology and accessibility. J Appl Polym Sci Polym Symp 37:797-813
52. Hill RJ (2008) Elastic modulus of microfibrillar cellulose gels. Biomacromolecules 9:2963-2966
53. Hlisnikovská K, Järnström L (2011) Polymer adsorption on nano fibrillar cellulose and its effects on suspension rheology. TAPPI international conference on nanotechnology for renewable ma-terials
54. Hubbe MA (2007) Flocculation and redispersion of cellulosic fiber suspension: a review of effects of hydrodynamic shear and polyelectrolyte. Bioresources 2:296-331
55. Hubbe MA, Rojas OJ, Lucia LA, Sain M (2008) Cellulosic nanocomposites: a review. Biore-sources 3:929-980
56. Iotti M, Gregersen Ø, Moe S, Lenes M (2011) Rheological studies of microfibrillar cellulose water dispersions. J Polym Environ 19(1):137-145
57. Iwamoto S, Lee SH, Endo T (2014) Relationship between aspect ratio and suspension viscosity of wood cellulose nanofibers. Polym J 46:73-76
58. Janardhnan S, Sain M (2011) Targeted disruption of hydroxyl chemistry and crystallinity in natural fibers for the isolation of cellulose nano-fibers via enzymatic treatment. Bioresources 6(2):1242-1250
59. Jonoobi M, Harun J, Mathew AP, Oksman K (2010) Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion. Compos Sci Technol 70:1742-1747
60. Jonoobi M, Mathew AP, Abdi MM, Davoodi Makinejad M, Oksman K (2012) A comparison of modified and unmodified cellulose nanofiber reinforced polylactic acid (PLA) prepared by twin screw extrusion. J Polym Environ 20:991-997
61. Jowkarderis L, Van de Ven TGM (2014) Intrinsic viscosity of aqueous suspensions of cellulose nanofibrils. Cellulose 21:2511-2517
62. Karppinen A, Vesterinen AH, Saarinen T, Inen PP, Seppälaä J (2011) Effect of cationic polymethacrylates on the rheology and flocculation of microfibrillated cellulose. Cellulose 18:1381-1390
63. Karppinen A, Saarinen T, Salmela J, Laukkanen A, Nuopponen M, Seppälä J (2012) Flocculation of microfibrillated cellulose in shear flow. Cellulose 19(6):1807-1819
64. Kaushik A, Singh M, Verma G (2010) Green nanocomposites bades on thermoplastic startch and steam exploded cellulose nanofibrils from whear straw. Carbohydr Polym 63:337-345
65. Klemm D, Heublein B, Fink HP, Bohn A (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Ed 44:3358-3393
66. Klemm D, Kramer F, Moritz S, Lindström T, Ankerfors M, Gray D, Dorris A (2011) Nanocellu-loses: a new family of nature- based materials. Angew Chem Int Ed 50(24):5438-5466
67. Kopania E, Wietecha J, Ciechańska D (2012) Studies on isolation of cellulose fibres from waste plant biomass. Fibers Text East Eur 6B(96):167-172
68. Korhonen M, Sorvari A, Saarinen T, Seppälä J, Laine J (2014) Deflocculation of cellulosic suspensions with anionic high molecular weight polyelectrolytes. Bioresources 9:3550-3570
69. Kumar H, Siddaramaiah (2005) Study of chemical and tensile properties of polyurethane and polyurethane/polyacrylonitrile coated bamboo fibers. J Reinf Plast Compos 24(2):209-213
70. Kumar H, Siddaramaiah, Roopa S (2005) Chemical and tensile properties of unsaturated polyester and polyacrylonitrile semi-interpenetrating polymer network coated bamboo fibers. J Reinf Plast Compos 24(2):215-218
71. Larson RG (1999) The structure and rheology of complex fluids. Oxford University, New York
72. Lasseuguette E, Roux D, Nishiyama Y (2008) Rheological properties of microfibrillar suspension of TEMPO-oxidized pulp. Cellulose 15:425-433
73. Lavoine N, Desloges I, Dufresne A, Bras J (2012) Microfibrillated cellulose-Its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90:735-764
74. Lee SH, Wang S (2006) Biodegradable polymers/bamboo fiber biocomposite with biobased coupling agent. Composites A 37:80-91
75. Lemahieu L, Bras J, Tiquet P, Augier S, Dufresne A (2011) Extrusion of nanocellulose-reinforced nanocomposites using the dispersed nano-objects protective encapsulation (DOPE) process. Macromol Mater Eng 296(11):984-991
76. Li J, Wei X, Wang Q, Chen J, Chang G, Kong L, Su J, Liu Y (2012) Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization. Carbohydr Polym 90:1609-1613
77. Liu D, Chen X, Yue Y, Chen M, Wu Q (2011) Structure and rheology of nanocrystalline cellulose. Carbohydr Polym 84:316-322
78. Lönnberg H, Larsson K, Lindström T, Hult A, Malmström E (2011) Synthesis of polycaprolactone-grafted microfibrillated cellulose for use in novel bionanocomposites -Influence of the graft length on the mechanical properties. ACS Appl Mater Interfaces 3:1426-1433
79. Lönnberg H, Larsson K, Lindström T, Hult A, Malmström E (2011) Synthjesis of plycaprolactone-grafted microfibrillated cellulose for use in novel biocomposites. ACS Appl Mater Interfaces 3:1426-1433
80. Loranger E, Piché AO, Daneault C (2012) Influence of high shear dispersion on the production of cellulose nanofibers by ultrasound-assisted TEMPO-oxidation of kraft pulp. Nanomaterials 2:286-297
81. Lowys MP, Desbrieres J, Rinaudo M (2001) Rheological characterization of cellulosic microfibril suspensions: role of polymeric additives. Food Hydrocoll 15:25-32
82. Lu J, Drzal LT (2008) Preparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials. Compos A 39:738-746
83. Mabrouk AB, Magnin A, Belgacem MN, Boufi S (2011) Melt rheology of nanocomposites based on acrylic copolymer and cellulose whiskers. Comp Sci Tech 71:818-827
84. Martinez DG, Stading M, Hermansson AM (2012) Correlation between viscoelasticity and micro-structure of a hierarchical soft composite based on nanocellulose and carrageenan. Ann Trans Nord Rheol Soc 20:117-121
85. Mewis J, Wagner NJ (2009a) Current trends in suspension rheology. J Non-Newton Fluid Mech 157:147-150
86. Mewis J, Wagner NJ (2009b) Thixotropy. Adv Colloid Interface Sci 147-148:214-227
87. Mewis J, Wagner NJ (2012) Colloidal suspension rheology. Cambridge University Press, New York
88. Mi Y, Chen X, Guo Q (1997) Bamboo fiber-reinforced polypropylene composites: crystallization and interfacial morphology. J Appl Polym Sci 64:1267-1273
89. Missoum K, Belgacem N, Krouit M, Martin C, Tapin-Lingua S, Bras J (2010) Influence of fibrillation degree and surface grafting of microfibrillated cellulose on their rheological behavior in aqueous suspension. TAPPI Nanotechnology conference for the forest product industry
90. Miyauchi M, Miao J, Simmons TJ, Lee JW, Doherty TV, Dordick JS, Linhardt RJ (2010) Conductive cable fibers with insulating surface prepared by coaxial electrospinning of multiwalled nanotubes and cellulose. Biomacromolecules 11(9):2440-2445
91. Moberg T, Rigdahl M, Stading M, Bragd EL (2014) Extensional viscosity of microfibrillated cellulose suspensions. Carbohydr Polym 102:409-412
92. Mohtaschemi M, Dimic-Misic K, Puisto A, Korhonen M, Maloney T, Paltakari J, Alava MJ (2014) Rheological characterization of fibrillated cellulose suspensions via bucket vane viscometer. Cellulose 21:1305-1312
93. Murali K, Rao M, Rao KM (2007) Extraction and tensile properties of natural fibers: vakka, date and bamboo. Compos Struct 77:288-295
94. Naderi A, Lindström T (2014) Carboxymethylated nanofibrillated cellulose: effect of monovalent electrolytes on the rheological properties. Cellulose 21:3507-3514. doi:10.1007/s10570-014-0394-0
95. Naderi A, Lindström T, Sundström J (2014) Carboxymethylated nanofibrillated cellulose: rheo-logical studies. Cellulose 21:1561-1571
96. Nakagaito AN, Fujimura A, Sakai T, Hama Y, Yano H (2009) Production of microfibrillated cel-lulose (MFC)-reinforced polylactic acid (PLA) nanocomposites from sheets obtained by a papermaking-like process. Comp Sci Technol 69:1293-1297
97. Nechita P, Panaitescu DM (2013) Improving the dispersibility of cellulose microfibrillated structures in a polymer matrix by controlling drying conditions and chemical surface modifications. Cell Chem Technol 47:711-719
98. Nechyporchuk O, Belgacem MN, Pignon F (2014) Rheological properties of micro-/nanofibrillated cellulose suspensions: wall-slip and shear banding phenomena. Carbohydr Polym 112:432-439
99. Newman RH (2004) Carbon-13 NMR evidence for cocrystallization of cellulose as a mechanism for hornification of bleached kraft pulp. Cellulose 11:46-52
100. Nguyen HD, Mai TT, Nguyen NB, Dang TD, Le ML, Dang TT, Tran VM (2013) A novel method for preparing microfibrillated cellulose from bamboo fibers. Adv Nat Sci Nanosci Nanotechnol 4:015016(9p)
101. Okubo K, Fujii T, Yamamoto Y (2004) Development of bamboo-based polymer composites and their mechanical properties. Compos A 35:377-383
102. Okubo K, Fujii T, Thostenson ET (2009) Multi-scale hybrid biocomposite: processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose. Compos A 40:469-475
103. 1H spin-spin relaxation time of water and rheological properties of cellulose nanofiber dispersion, transparent cellulose hydrogel (TCG). Polym J 36:684-694
104. O’Sullivan AC (1997) Cellulose: the structure slowly unravels. Cellulose 4:173-207
105. Paakko M, Ankerfors M, Kosonen H, Nykanen A, Ahola S, Osterberg M (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8:1934-1941
106. Peng Y, Gardner DJ, Han Y (2011) Drying cellulose nanofibrils: in search of a suitable method. Cellulose 19:91-102. doi: 10.1007/s10570-011-9630-z
107. Peng Y, Han Y, Gardner DJ (2012) Spray-drying cellulose nanofibrils: effect of drying process parameters on particle morphology and size distribution. Wood Fiber Sci 44:1-14
108. Phiriyawirut M, Chotirat N, Phromsiri S, Lohapaisarn I (2010) Preparation and properties of natural rubber-cellulose microfibril nanocomposite films. Adv Mater Res 93-94:328-331
109. Plummer CJ, Choo CK, Boissard C, Bourban P, Manson JA (2013) Morphological investigation of polylactide/microfibrillated cellulose composites. Colloid Polym Sci 291:2203-2211
110. Puisto A, Illa X, Mohtaschemi M, Alava M (2012) Modeling the rheology of nanocellulose suspensions. Nord Pulp Paper Res J 27:277-281
111. Qi H, Sui X, Yuan J, Wei Y, Zhang L (2010) Electrospinning of cellulose-based fibers from NaOH/Urea aqueous system. Macromol Mater Eng 295(8):695-700
112. Rajulu AV, Rao BR, Reddy RL, Sanjeevi R (2001) Chemical resistance and tensile properties of epoxy/polycarbonate blend coated bamboo fibres. J Reinf Plast Compos 20(4):335-340
113. Rastogi VK, Samyn P (2014) Novel production method for in-situ hydrophobization of a microfibrillated cellulose network. Mater Lett 120:196-199
114. Rezayati Charani P, Dehghani-Firouzabadi M, Afra E, Blademo Å, Naderi A, Lindström T (2013) Production of microfibrillated cellulose from unbleached kraft pulp of Kenaf and Scotch Pine and its effect on the properties of hardwood kraft: microfibrillated cellulose paper. Cellulose 20:2559-2567
115. Saarikoski E, Saarinen T, Salmela J, Seppälä J (2012) Flocculated flow of microfibrillated cellulose water suspensions: an imaging approach for characterisation of rheological behavior. Cellulose 19(3):647-659
116. Saarinen T, Haavisto S, Sorvari A, Salmela J, Seppala J (2014) The effect of wall depletion on the rheology of microfibrillated cellulose water suspensions by optical coherence tomography. Cellulose 21:1261-1275
117. Saito T, Nishiyama Y, Putaux J-L, Vignon M, Isogai A (2006) Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose. Biomacromolecules 7(6):1687-1691
118. Salmela J, Haavisto S, Koponen A, Jäsberg A, Kataja M (2013) Rheological characterization of micro-fibrillated cellulose fiber suspension using multi scale velocity profile measurements. Advances in pulp and paper research, 15th fundamental research symposium, Cambridge, Eng-land
119. Saxena M, Gowri VS (2003) Studies on bamboo polymer composites with polyester amide polyol as interfacial agent. Polym Compos 24(3):428-436
120. Shafiei-Sabet S, Hamad WY, Hatzikiriakos SG (2012) Rheology of nano-crystalline nellulose aqueous suspensions. Langmuir 28:17124-17133
121. Shumigin D, Tarasova E, Krumme A, Meier P (2011) Rheological and mechanical properties of poly(lactic) acid/cellulose and LDPE/cellulose composites. Mater Sci 17(1):32-37
122. Siddiqui N, Mills RH, Gardner DJ, Bousfield D (2011) Production and characterization of cellulose nanofibers from wood pulp. J Adhes Sci Technol 25(6-7):709-721
123. Siqueira G, Tadokoro SK, Mathew AP, Oksman K (2010) Carrot nanofibers and nanocomposites applications. 7th international symposium on natural polymers and composites, Gramado, Brazil
124. Siró I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17:459-494
125. Spence KL, Venditti RA, Rojas OJ, Habibi Y, Pawlak JJ (2011) A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different pro-cessing methods. Cellulose 18:1097-1111
126. Šutka A, Kukle S, Gravitis J (2013) An environmentally friendly method for microfibrillated cellulose extraction from hemp. In: Proceedings of 10th international conference of young scientists on energy issues, Lithuania, Kaunas, 29-31 May 2013. (Kaunas: Lithuanian Energy Institute, 2013, pp. 81-86. ISSN 1822-7554)
127. Suzuki K, Sato A, Okumura H, Hushimoto T, Nakagito AN, Yano H (2014) Novel high-strength microfibrillated cellulose reinforced polypropylene composites using a cationic polymer as compatibilizer. Cellulose 21:507-518
128. Taipele T, Österberg M, Nykänen A, Ruokolainen J, Laine J (2010) Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 17:1005-1020
129. Takagi H, Ichihara Y (2004) Effect of fiber length on mechanical properties of '‘Green" composites using a starch-based resin and short bamboo fibers. JSME Int J Ser A Solid Mech Mater Eng 47:551-555
130. Tanpichai S, Quero F, Nogi M, Yano H, Young RJ, Lindström T, Sampson WW, Eichhorn SJ (2012) Effective young’s modulus of bacterial and microfibrillated cellulose fibrils in fibrous networks. Biomacromolecules 13(5):1340-1349
131. Tatsumi D, Ishioka S, Matsumoto T (2002) Effect of fiber concentration and axial ratio on the rheological properties of cellulose fiber suspensions. J Soc Rheol Jpn 30:27-32
132. Tingaut P, Zimmermann T (2011) Functional polymer nanocomposite materials from microfibrillated cellulose, In: Nanocomposites, Editor: Abbass Hashim, Editions InTech (ISBN 978-953-308-55-0)
133. Urena-Benavides EE, Ao G, Davis VA, Kitchens CL (2011) Rheology and phase behavior of lyo-tropic cellulose nanocrystal suspensions. Macromolecules 44:8990-8998
134. Wicaksono R, Syamsy K, Yuliasih I, Nasir M (2013) Cellulose nanofibers from cassava bagasse: characterization and application on tapioca film. Chem Mater Res 3:79-87
135. Wierenga AM, Philipse AP (1998) Low-shear viscosity of isotropic dispersions of (Brownian) rods and fibres: a review of theory and experiments. Colloid Surf A 137:355-372
136. Wiklund J, Stading M (2006) Application of in-line ultrasound Doppler based UVP-PD method to concentrated model and industrial suspensions. In: Proceedings of 5th international symposium on ultrasonic doppler methods for fluid mechanics and fluid engineering, Zürich, 12-14 Sept 2006, pp 145-148
137. Zepic V, Fabjan E, Kasynic M, Korosec RC, Hancic A, Oven P, Perse LS (2014) Morphological, thermal, and structural aspects of dried and redispersed nanofibrillated cellulose. Holzforschung 68:657-667
138. 2 and water as co-blowing agents. Ind Eng Chem Res 53:11962-11972
139. Zhou C, Wu Q, Zhang Q (2011) Dynamic rheological studies of in-situ polymerization process of polyacrylamide-cellulose nanocrystal composite hydrogels. Colloid Polym Sci 289:247-255
140. Zhu AJ, Sternstein SS (2003) Nonlinear viscoelasticity of nanofilled polymers: interfaces, chain statistics and properties recovery kinetics. Comp Sci Tech 63:1113-1126
141. Zimmermann T, Bordeanu N, Strub E (2010) Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential. Carbohydr Polym 79:1086-1093
142. Zirnsak MA, Hur DU, Boger DV (1994) Normal stresses in fibre suspensions. J Non-Newtonian Fluid Mech 54:153-193
143. Zuluaga R, Putaux JL, Restrepo A, Mondragon I, Gañán P (2007) Cellulose microfibrils from banana farming residues: isolation and characterization. Cellulose 14(6):585-592