Deflocculation of Cellulosic Suspensions with Anionic High Molecular Weight Polyelectrolytes

BioResources

Volumn 9, Issue 2, 2014, Pages 3550-3570

  Korhonen, Markus H J ^a   Sorvari, Anni ^a   Saarinen, Tapio ^a   Seppälä, Jukka ^a   Laine, Janne ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Anionic polyacrylamide; Deflocculation; Dewatering; Microfibrillated cellulose; Nanofibrillated cellulose; Pulp fibers; Rheology

Indexed keywords

CELLULOSE; CELLULOSE NANOCRYSTALS; DEWATERING; FLOCCULATION; MOLECULAR WEIGHT; NANOCELLULOSE; OSTWALD RIPENING; SHEAR FLOW; SWELLING;

ADSORPTION EXPERIMENT; ANIONIC POLY-ELECTROLYTES; ANIONIC POLYACRYLAMIDES; CELLULOSIC MATERIAL; FLOCCULATION MECHANISMS; HIGH MOLECULAR WEIGHT POLYELECTROLYTES; MICROFIBRILLATED CELLULOSE (MFC); RHEOLOGICAL EXPERIMENT;

POLYELECTROLYTES;

CELLULOSE; FLOCCULATION; MOLECULAR WEIGHT; SHEAR FLOW; SWELLING; WATER REMOVAL;

EID: 84944208791     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.9.2.3550-3570     Document Type: Article

References (52)

1. Ahola, S., Myllytie, P., Osterberg, M., Teerinen, T., and Laine, J. (2008). “Effect of polymer adsorption on cellulose nanofibril water binding capacity and aggregation,” BioResources 3, 1315-1328.
2. Beghello, L., and Lindstrom, T. (1998a). “The influence of carboxymethylation on the fiber flocculation process,” Nord. Pulp Pap Res. J. 13(4), 269-274.
3. Beghello, L. (1998b). “Some factors that influence fiber flocculation,” Nord. Pulp Pap Res. J. 13(4), 274-279.
4. Beghello, L., and Eklund, D. (1999). “The influence of the chemical environment on fiber flocculation,” J. Pulp Pap. Sci. 25(7), 246-250.
5. Blanco, A., Fuente, E., Negro, C., Monte, M. C., and Tijero, J. (2002). “Focused beam reflectant measurement as a tool to measure flocculation,” Tappi J. 1(10), 14-20
6. Britt, K. W., and Unbehend, J. E. (1976). “New method of monitoring retention,” Tappi 59(2), 67-70.
7. Buscall, R. (2010). “Letter to the Editor: Wall slip in dispersion rheometry,” J. Rheol. 54(6), 1177-1183.
8. Christiernin, M., Henriksson, G., Lindström, M., Brumer, H., Teeri, T., Lindström, T., and Laine, J. (2003). “The effects of xyloglucan on the properties of paper made from bleached kraft pulp,” Nord. Pulp Pap Res. J. 18(2), 182-187.
9. Cichoracki, T., Gullichsen, J., and Paulapuro, H. (2001). “High consistency forming - A new concept,” Tappi J. 84(3), 61.
10. De Roos, A. (1958). “Stabilization of fibre suspensions,” Tappi 41(7), 343-358
11. Eronen, P., Österberg, M., Heikkinen, S., Tenkanen, M., and Laine, J. (2011). “Interactions of structurally different hemicelluloses with cellulose nanofibrillar films,” Carbohydr. Polym. 86(3), 1281-1290.
12. Ferry, J. D. (1980). “Viscoelastic properties of polymers,” 3rd edition, John Wiley & Sons, Inc., New York.
13. Giri, M., Simonsen, J., and Rochefort, W. (2000). “Dispersion of pulp slurries using carboxymethylcellulose,” Tappi J. 83(10), 1-14.
14. Hubbe, M. A. (1986). “Retention and hydrodynamic shear,” Tappi J. 69(8), 116-117. Hubbe, M. A. (2007). “Flocculation of cellulose fibers,” BioResources 2(2), 296-331.
15. Hubbe, M. A., and Heitmann, J. (2007). “Review of factors affecting the release of water from cellulosic fibers during paper manufacture,” BioResources 2(3), 500-533.
16. Hubbe, M. A., Chen, H., and Heitmann, J. (2009). “Permeability reduction phenomena in packed beds, fiber mats, and wet webs of paper exposed to flow of liquids and suspensions: A review,” BioResources 4(1), 405-451.
17. Karppinen, A., Saarinen, T., Salmela, J., Laukkanen, A., Nuopponen, M., and Seppala, J. (2012). “Flocculation of microfibrillated cellulose in shear flow,” Cellulose 19, 18071819.
18. Katz, S., Beatson, R. P., and Scallan, A. M. (1984). “The determination of strong and weak acidic groups in sulfite pulp,” Sven. Papperstidn. 87, R48-R53.
19. Kerekes, R. J. (2006). “Rheology of fibre suspensions in papermaking: An overview of recent research,” Nord. Pulp Pap Res. J. 21(5), 598-612
20. Koljonen, K., Mustaranta, A., and Stenius, P. (2004). “Surface characterisation of mechanical pulps by polyelectrolyte adsorption,” Nord. Pulp Pap Res. J. 19(4), 495505.
21. Kontturi, K., Kontturi, E., and Laine, J. (2013). “Specific water uptake of thin films from nanofibrillar cellulose,” J. Mater. Chem. A 1, 13655-13663.
22. Lee, P., and Lindstrom, T. (1989). “Effects of high molecular mass anionic polymers on paper sheet formation,” Nord. Pulp Pap Res. J. 4(2), 61-70.
23. Martinez, D. M., Kiiskinen, H., Ahlman, A.-K., and Kerekes, R. J. (2003). “On the mobility of flowing papermaking suspensions and its relationship to formation,” J. Pulp Pap. Sci. 29(10), 341-347.
24. Nomura, T., Kiyoshi, W., and Shimizu, T. (1989). “High consistency sheet forming -Part 1: Research and development of head boxes,” Tappi J. 72, 115-122.
25. Norman, B. (2008). Papermaking Science and Technology Book 8, Chapter 6, H. Paulapuro (ed.), Fapet, Finland.
26. Ntalikwa, J. W. (2007). “Determination of surface charge density of α-alumina by acidbase titration,” Bull. Chem. Soc. Ethiop. 21(1), 117-128.
27. Olszewska, A., Valle-Delgado, J., Nikinmaa, M., Laine, J., and Osterberg, M. (2013). “Direct measurements of non-ionic attraction and nanoscaled lubrication in biomimetic composites from nanofibrillated cellulose and modified carboxymethylated cellulose,” Nanoscale 5, 11837-11844.
28. Ordóñez, R., Hermosilla, D., de la Fuente, E., and Blanco, A. (2009). “Influence of water quality on the efficiency of retention aids systems for the paper industry,” Ind. Eng. Chem. Res. 48(23), 10247-10252.
29. Palonen, H., and Jokinen, O. (1986). “Interdependence of retention and formation in the manufacture of SC paper,” Paperi Puu 11, 801-808.
30. Qasaimeh, M. A. (2011). “Causes of transient flocculation of fines with polyethylene oxide and a cofactor: Implications for mill performance," Coll. Surf. A 386, 125-130.
31. Qasaimeh, M. A., Bani Hani, F., and Dawagreh. A. M. (2011). “Neutral polyethylene oxide with a cofactor recommended for particle flocculation,” Braz. J. Chem. Eng. 28(3), 467-473.
32. Roberts, J. C. (ed.) (1996). The Chemistry of Paper, Royal Society of Chemistry, Cambridge, UK, 64-82.
33. Rodahl, K., Höök, F., Krozer, A., Brzezinski, P., and Kasemo, B. (1995). “Quartz crystal microbalance setup for frequency and Q-factor measurements in gaseous and liquid environments,” Rev. Sci. Intrum. 66, 3924-3930.
34. Saarinen, T., Österberg, M., and Laine J. (2009). “Properties of cationic polyelectrolyte layers adsorbed on silica and cellulose surfaces studied by QCM-D - Effect of polyelectrolyte charge density and molecular weight,” J. Dispersion Sci. Technol. 30(6), 969-979.
35. Saito, T., Nishiyama, Y., Putaux, J. L., Vignon, M., and Isogai, A. (2006). “Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose,” Biomacromolecules 7(6), 1687-1691.
36. Sikora, M., and Stratton, R. A. (1981). “The shear stability of flocculated colloids,” Tappi 64(11), 97-101.
37. Silveira, M., Ferreira, A., and Lobo, L. (2002). “The viscosity of aqueous suspensions of cellulose fibers - Part 1. Influence of consistency and fiber length,” Silva Lusitana 10(2), 171-178.
38. Spence, K. L., Venditti, R. A., Rojas, O. J., Habibi, Y., and Pawlak, J. J. (2010). “The effect of chemical composition on microfibrillar cellulose films from wood pulps: Water interactions and physical properties for packaging applications,” Cellulose 17(4), 835-848.
39. Spence, K. L., Venditti, R. A., Rojas, O. J., Habibi, Y., and Pawlak, J. J. (2011). “A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods,” Cellulose 18(4), 1097-1111.
40. Svedberg, A. (2012). “Improvement of the retention-formation relationship using three component retention aid systems,” Doctoral dissertation, Department of Fibre and Polymer Technology, Royal Institute of Technology, Stockholm, Sweden.
41. Swerin, A., Ödberg, L., and Lindström, T. (1990). “Deswelling of hardwood kraft pulp fibres by cationic polymers: The effect of wet pressing and sheet properties,” Nord. Pulp Pap Res. J. 5(4), 188-196.
42. Taipale, T., Holappa, S., Ahlgren, J., Cecchini, J., and Laine, J. (2010). “Interactions of thermo mechanical pulp fractions with high molar mass cationic polyacrylamides: Part 2. Flocculation,” Nord. Pulp Pap Res. J. 25(3), 310-318.
43. Tanaka, H., Swerin, A., and Ödberg, L. (1993). “Transfer of cationic retention aid from fibers to fine particles and cleavage of polymer chains under wet-end papermaking conditions,” Tappi J. 76(5), 157-163.
44. Vartiainen, J., Pöhler, T., Sirola, K., Pylkkänen, L., Alenius, H., Hokkinen, J., Tapper, U., Lahtinen, P., Kapanen, A., Putkisto, K., Hiekkataipale, P., Eronen, P., Ruokolainen, J., and Laukkanen, A., (2011). “Health and environmental safety aspects of friction grinding and spray drying of microfibrillated cellulose,” Cellulose 18(3), 775-786.
45. van de Ven, T. G. M., Qasaimeh, M. A., and Paris, J. (2005). “Fines deposition on pulp fibers in a turbulent flow loop,” Ind. Eng. Chem. Res. 44(5), 1291-1295.
46. Wang, Q. Q., Zhu, J. Y., Gleisner, R., Kuster, T. A., Baxa, U. S., and McNeil, E. (2012). “Morphological development of cellulose fibrils of a bleached eucalyptus pulp by mechanical fibrillation,” Cellulose 19(5), 1631-1643.
47. Wasser, R. B. (1978). “Formation aids for paper - An evaluation of chemical additives for dispersing long fibered pulps,” Tappi 61(11), 115-118.
48. Yan, H., and Norman, B. (2006a). “Fibre floc behaviour of softwood kraft pulp in flowing suspensions,” Nord. Pulp Pap Res. J. 21(1), 24-29.
49. Yan, H., Lindström, T., and Christiernin, M. (2006b). “Fibre length effect on fibre suspension flocculation and sheet formation,” Nord. Pulp Pap Res. J. 21(1), 30-35.
50. Yan, H., Lindstrom, T., and Christiernin M. (2006c). “Some ways to decrease fibre suspension flocculation and improve sheet formation,” Nord. Pulp Pap Res. J. 21(1), 36-43.
51. Zauscher, S., and Klingenberg D. (2001). “Friction between cellulose surfaces measured with colloidal probe microscopy,” Coll. Surf. A 178, 213-229.
52. Zhao, R. H., and Kerekes, R. J. (1993). “The effect of suspending liquid viscosity on fiber flocculation,” Tappi J. 76(2), 183-188.