Solid lubricants and self-lubricating films

Modern Tribology Handbook: Volume One: Principles of Tribology

Volumn , Issue , 2000, Pages 787-825

  Erdemir, Ali ^a  

^a ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056931470     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (174)

1. Ahsley, S. (1992), Lubricating ceramic engines with exhaust, Mechanical Eng., 114, 72-73.
2. Ajayi, O.O., Erdemir, A., Hsieh, J.H., Erck, R.A., Fenske, G.R., and Nichols, F.A. (1993), Boundary film for structural ceramic materials, Wear, 164, 1150-1155.
3. Ajayi, O.O., Erdemir, A., Fenske, G.R., Erck, R.A., Hsieh, J.H., and Nichols F.A. (1994), Effect of metalliccoating properties on the tribology of coated and oil-lubricated ceramics, Tribol. Trans., 37, 656-661.
4. Barnett, R.S. (1977), Molybdenum disulfide as an additive for lubricating greases, Lubr. Eng., 33, 308-313.
5. Bahadur, S. and Gong, D. (1992), The action of fillers in the modification of the tribological behavior of polymers, Wear, 158, 41-59.
6. 2 coatings on ceramics, Tribol. Trans., 36, 621-626.
7. Bhattacharya, R.S., Rai, A.K., Zabinski, J.S., McDevitt, N.T., and Neil, T. (1994), Ion beam modification of fullerene films and their frictional behavior, J. Mat. Res., 9, 1615-1618.
8. 60 films for tribology, Appl. Phys. Lett., 62, 3253-3255.
9. Bindal C. and Erdemir, A. (1996), Ultralow friction behavior of borided steel surfaces after flash-annealing, Appl. Phys. Lett., 68, 923-926.
10. Blanchet, T.A. and Kennedy, F.E. (1992), Sliding wear mechanism of polytetrafluoroethylene (PTFE) and PTFE composites, Wear, 153, 229-243.
11. Blanchet, T.A., Lauer, J.L., Liew, Y.-F., Rhee, S.J., and Sawyer, W.G. (1994), Solid lubrication by decomposition of carbon monoxide and other gases, Surf. Coat. Technol., 68-69, 446-452.
12. Boes, D.J. and Chamberlain, B. (1968), Chemical interactions involved in the formation of oxidationresistant solid lubricant composites, ASLE Trans., 11, 131-139.
13. 2 films, Surf. Coat. Technol., 46, 207-216.
14. Briscoe, B.J. (1990), Materials aspects of polymer wear, Scripta Met. Material., 24, 839-844.
15. Broman, V.E., DeJovine, J., DeVries, D.L., and Keller, G.H. (1978), Testing of Friction Modified Crankcase Oils for Improved Fuel Economy, SAE Reprint No. 780597.
16. Buckley, D. (1978), Friction and transfer behavior of pyrolytic boron nitride in contact with various metals, ASLE Trans., 21, 118-124.
17. Burton, R.A. and Burton, R.G. (1989), Friction and wear experiments on glassy carbon based materials, Proc. 35th Meet. IEEE Holm Conf. on Electrical Contacts, IEEE, New York, 31-34.
18. Clauss, F.J. (1972), Solid Lubricants and Self-lubricating Solids, Academic Press, New York.
19. Dayson, C. (1971), The friction of very thin solid film lubricants on surfaces of finite roughness, ASLE Trans., 14, 105-115.
20. DellaCorte C. and Fellenstein, J.A. (1997), The effect of compositional tailoring on the thermal expansion and tribological properties of PS300: a solid lubricant composite coating, Tribol. Trans., 40, 639-645.
21. DellaCorte, C., Sliney, H.E., and Deadmore, D.L. (1988), Sputtered silver films to improve chromium carbide based solid lubricant coatings for use to 900°C., STLE Trans., 31, 329-334.
22. DellaCorte, C. and Sliney, H.E. (1987), Composition optimization of self-lubricating chromium-carbide based composite coatings for use to 760°C, ASLE Trans., 30, 77-83.
23. DellaCorte, C. (1998), The Evaluation of a Modified Chrome Oxide Based High Temperature Solid Lubricant Coating for Foil Bearings, NASA/TM-1998-208660.
24. DellaCorte, C. and Sliney, H.E. (1990), Tribological Properties of PM 212: A High-temperature Self- Lubricating Powder Metallurgy Composite, NASA TM-102355.
25. Denton, R.M. and Fang, Z. (1995), Rock Bit Grease Composition, U.S. Pat. No. 5589443.
26. Donnet C. (1996), Advanced solid lubricant coatings for high vacuum environments, Surf. Coat Technol., 80, 151-156.
27. 2 coatings in ultrahigh vacuum, Surf. Coat. Technol., 62, 406-411.
28. Dresselhaus, M.S. (1996), Intercalation in Layered Materials, NATO ASI Series, Vol. 148, Plenum Press, New York.
29. 2 deposited by ion beam assisted deposition: 2H or random layer structure?, J. Mat. Res., 13, 3001-3007.
30. El-Sherbiny, M. and Salem, F. (1986), Tribological properties of PVD silver films, STLE Trans., 29, 223-228.
31. Erck, R.A., Erdemir, A., Fenske, G.R., and Hsieh, J.-H. (1992), Ion-beam assisted surface modifications for friction and wear reduction, Lubr. Eng., 48, 307-312.
32. Erdemir, A., Fenske, G.R., Erck R.A., and Cheng, C.C. (1990a), Ion-assisted deposition of silver films on ceramics for friction and wear control, Lubr. Eng., 46, 23-30.
33. Erdemir, A., Fenske, G.R., and Erck, R.A. (1990b), A study of the formation and self-lubricating mechanisms of boric acid films on boric oxide coatings, Surf. Coat. Technol., 43/44, 588-532.
34. Erdemir, A., Fenske, G.R., Nichols F.A., and Erck, R.A. (1990c), Solid lubrication of ceramic surfaces by IAD-silver coatings for heat engine applications, Tribol. Trans., 33, 511-516.
35. Erdemir, A. (1991), Tribological properties of boric acid and boric-acid-forming surfaces. I. Crystal chemistry and mechanism of self-lubrication of boric acid, Lubr. Eng., 47, 168-172.
36. Erdemir, A., Erck, R.A., and Robles, J. (1991a), The relation of Hertzian contact pressure to friction behavior of self-lubricating boric acid films, Surf. Coat. Technol., 49, 435-438.
37. Erdemir, A., Busch, D.E., Erck, R.A., Fenske, G.R., and Lee, R.H. (1991b), Ion-beam-assisted deposition of silver films on zirconia ceramics for improved tribological behavior, Lubr. Eng., 47, 863-867.
38. Erdemir, A., Fenske, G.R., Erck, R.A., Nichols F.A., and Busch, D.E. (1991c), Tribological properties of boric acid and boric-acid-forming surfaces. II. Mechanisms of formation and self-lubrication of boric acid films on boron- and boric oxide-containing surfaces, Lubr. Eng., 47, 179-185.
39. Erdemir, A., Erck, R.A., Fenske, G.R., and Hong, H. (1996a), Solid/liquid lubrication of ceramics at elevated temperature, Wear, 203/204, 588-594.
40. Erdemir, A., Bindal, C., Zuiker, C., and Savrun, E. (1996b), Tribology of naturally-occurring boric acid films on boron carbide, Surf. Coat. Technol., 86/87, 507-511.
41. Erdemir, A., Fenske, G.R., and Munson, J.H. (1996c), Proc. 29th Int. Symp. on Automotive Technology and Automation, June 3-6, 1996, Florence, Italy, 766.
42. Erdemir, A., Halter, M., and Fenske, G.R. (1996d), Preparation of ultralow-friction surface films on vanadium diboride, Wear, 205, 236-240.
43. Erdemir, A. and Erck, R.A. (1996), Effect of niobium interlayer on high-temperature sliding friction and wear of silver films on alumina, Tribol. Lett., 2, 23-28.
44. 2 ceramics, Tribol. Trans., 35, 287-292.
45. Erdemir, A. (1993), Friction and Wear of Ceramics, S. Jahanmir (Ed.), Marcel Dekker, New York, 119-162.
46. Erdemir, A., Eryilmaz, O.L., Nilufer, I.B., and Fenske, G.R. (2000), Effect of source gas chemistry on tribological performance of diamondlike carbon films, Diamond Rel. Mat., 9, 632-637.
47. Erdemir, A., Eryilmaz, O.L., and Fenske, G.R. (1999), Self-replenishing solid lubricant films on boron carbide, Surf. Eng., 15, 291-295.
48. Erdemir, A. (2000a), A crystal chemical approach to lubrication by solid oxides, Tribol. Lett., 8, 97-102.
49. Erdemir, A. (1994), Crystal chemistry and self-lubricating properties of monochalcogenides gallium selenide and tin selenide, Tribol. Trans., 37, 471-476.
50. Erdemir, A., Bindal, C., and Fenske, G.R. (1998), Lubricated Boride Surfaces, U.S. Pat. No. 5, 840, 132.
51. Erdemir A. and Fenske G.R. (1998), Clean and Cost-Effective Dry Boundary Lubricants for Aluminum Forming, SAE Paper No. 980453.
52. Erdemir, A. (1995), Lubrication from Mixture of Boric Acid with Oils and Greases, U.S. Patent No. 5, 431, 830.
53. Erdemir, A. (2000b), Lubrication with Boric Acid Additives, U.S. Patent No. 6,025,306.
54. Falvo, M.R., Taylor, R.M., Helser, A., Chi, V., Brooks, F.P., Washburn, S., and Superfine, R. (1999), Nanometre-scale rolling and sliding of carbon nanotubes, Nature, 397, 236-238
55. Farr, L.P.G. (1975), Molybdenum disulfide in lubrication. A review, Wear, 35, 1-22.
56. Fox, V., Hampshire J., and Teer, D. (1999), MoS2/metal composite coatings deposited by closed-field unbalanced magnetron sputtering: tribological properties and industrial uses, Surf. Coat. Technol., 112, 118-122.
57. Friedrich, K., Lu, Z., and Hager, A.M. (1995), Recent advances in polymer composites’ tribology, Wear, 190, 139-144.
58. Funatani, K. and Kurosawa, K. (1994), Composite coatings improve engines, Adv. Mat. Proc., 146, 27-29.
59. Fusaro, R.L. (1988), Evaluation of several polymer materials for use as solid lubricants in space, Tribol. Trans., 31, 174-181.
60. Fusaro, R.L. and Sliney, H.E. (1970), Graphite fluoride (CFx)n — A new solid lubricant, ASLE Trans., 13, 56-65.
61. Fusaro, R.L. and Sliney, H.E. (1973), Lubricating characteristics of polyimide bonded graphite fluoride and polyimide thin films, ASLE Trans., 16, 189-196.
62. Fusaro, R.L. (1990), Self-lubricating polymer composites and polymer transfer film lubrication for space applications, Tribol. Int., 23, 105-108.
63. Fusaro, R.L. (1978), Lubrication and Failure Mechanisms of Molybdenum Disulfide Films. Part I. Effect of Atmosphere, NASA TP-1343.
64. Gangopadhyay, A. and Jahanmir, S. (1991), Friction and wear characteristics of silicon nitride-graphite and alumina-graphite composites, Tribol. Trans., 34, 257-265.
65. 2-x). II. Experimental evidence, Tribol. Trans., 32, 209-220.
66. 2-x), Proc. 6th Int. Congr. on Tribology, Eurotrib 93, M. Kozma (Ed.), Vol. 3, Aug. 30-Sept. 2, 201-206.
67. 2 Lubricant Compact, ASLE Preprint # 84-AM-6C-1
68. 2-x), Tribol. Trans., 31, 427-436.
69. 2 coatings produced by DC magnetron co-deposition, Surf. Coat. Technol., 108-109, 345-351.
70. 2, Surf. Coat. Technol., 105, 45-50.
71. Gogotsi, Y.G., Jeon, I.D., and McNallan, M.J. (1997), Carbon coatings on silicon carbide by reaction with chlorine containing gases, J. Mater. Chem., 7, 1841-1848.
72. Gresham, R.M. (1997), Bonded solid lubricants, CRC Handbook of Lubrication: Theory and Practice of Tribology, Vol. 3, E. R. Booser (Ed.), CRC Press, Boca Raton, FL, 167-181.
73. Heshmat, H. and Heshmat, C.A. (1999), The effect of slider geometry on the performance of a powder lubricated bearing, Tribol. Trans., 42, 640-646.
74. 2 as powder lubricants in high speed, multi-pad journal bearings, J. Tribol., 121, 625-630.
75. 2 solid lubricant films having tailored metal-multilayer nanostructures, Surf. Coat. Technol., 53, 13-23.
76. 2 solid lubricant thin films, J. Mat. Res., 13, 1022-1032.
77. 2 solid lubricants films, Advances in Engineering Tribology, Chung, Y.W. and Cheng, H.S., (Eds.), STLE SP-31, 31-36.
78. Jamison, W.E. (1978), Electronic effects on the lubricating properties of molybdenum disulfide and related materials, ASLE Proc. 2nd Int. Conf. Solid Lubrication, ASLE Sp-6, STLE, Park Ridge, IL, 1-8.
79. Jamison, W.E. (1972), Structure and bonding effects on the lubrication properties of crystalline solids, ASLE Trans., 15, 296-305.
80. Jamison, W.E. (1994), Plastics and plastic matrix composites, in CRC Handbook of Tribology and Lubrication, Vol. 3, CRC Press, Boca Raton, FL, 121-147.
81. Jayaram, G., Marks, L.D., and Hilton, M.R. (1995), Nanostructure of Au-20%Pd layers in MoS2 multilayer solid lubricant films, Surf. Coat. Technol., 77, 393-39.
82. John, P.J. and Zabinski, J.S. (1999), Sulfate based coatings for use as high temperature lubricants, Tribol. Lett., 7, 31-37.
83. Kanakia, M.D. and Peterson, M.B. (1987), Literature Review of the Solid Lubrication Mechanisms, Southwest Research Institute, Interim Report, BFLRF #213, San Antonio, TX, 6-18.
84. Kanakia, M., Owens, M.E., and Ling, F.F. (1984), in Proc. Workshop on Fundamentals of High Temperature Friction and Wear with Emphasis on Solid Lubrication for Heat Engines, Ling, F.F. (Ed.), Industrial Tribology Institute, Troy, NY, pp. 19-38.
85. Kimura, Y., Wakabayashi, T., Okada, K., Wada, T., and Nishikawa, H. (1999), Boron nitride as a lubricant additive, Wear, 232, 199-206.
86. King, J.P. and Forster, N.H. (1990), Synthesis and Evaluation of Novel High Temperature Solid Lubricants, AIAA Paper # 90-2044.
87. Kobs, K., Dimigen, H., Huebsch, H., Tolle, H.J., Leutenecker, R., and Ryssel, H. (1986), Enhanced endurance life of sputtered MoSx films on steel by ion beam mixing, Mat. Sci. Eng., 90,281-286.
88. Kumar, R. and Sudarshan, T.S. (1996), Self-lubricating composites: graphite-copper, Mat. Technol., 11, 191-194.
89. Kurtz, S.M., Muratoglu, O.K., Evans, M.E., and Avram A. (1999), Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty, Biomaterials, 20, 1659-1688.
90. Lancaster, J.K. (1984), Solid lubricants, in CRC Handbook of Lubrication: Theory and Practice of Tribology, Vol. II, Theory and Design, Booser, E.R. (Ed.), CRC Press, Boca Raton, FL, 269-290.
91. Langlade, C., Fayeulle, S., and Olier, R. (1994), Role of additives in the physico-chemistry of graphitebased transfer films, Thin Solid Films, 237 38-47.
92. Lansdown, A.R. (1999), Molybdenum Disulphide Lubrication, Tribology Series, 35, Dowson, D. (Ed.), Elsevier, Amsterdam.
93. Lauer, J.L. and Bunting, B.G. (1988), High temperature solid lubrication by catalytically generated carbon, Tribol. Trans., 31, 339-350.
94. Levy, F. (1979), Intercalated Layered Materials, D. Reidel, Boston.
95. 2 films, J. Mater. Res., 2, 827-838.
96. Maillat, M., Chattopadhya, A.K., and Hintermann, H.E. (1993), Preparation of silver coatings to obtain low friction in alternating sliding at 570°C, Surf. Coat. Technol., 61, 25-29.
97. Martin, J.M., LeMogne, T., Chassagnette, C., and Gardos, M.N. (1992), Friction of hexagonal boron nitride in various environments, Tribol. Trans., 35, 463-472.
98. Martin, J.M., Pascal, H., Donnet, C., LeMogne, T., Loubet, J.L., and Epicier, T. (1994), Superlubricity of MoS2: crystal orientation mechanisms, Surf. Coat. Technol., 68-69, 427-432.
99. Martin, J.M., Donnet, C., LeMogne, T., and Epicier, T. (1993), Superlubricity of molybdenum disulfphide, Phys. Rev., B48, 10583-10586.
100. Mate, M.C., McClelland, G.M., Erlandsson, R., and Chiang, S. (1987), Atomic-scale friction of a tungsten tip on a graphite surface, Phys. Rev. Lett., 59, 1942-1945.
101. McMurtrey, E.L. (1985), Lubrication Handbook for the Space Industry. Part A. Solid Lubricants, 1985, NASA TM-86556
102. Miyoshi, K. (1996), Solid Lubrication Fundamentals and Applications, NASA TM-107249.
103. 2 composite coatings, Z. fur Metallkunde, 88, 498-501.
104. 2-x lubricating films: structure and wear mechanisms investigated by cross-sectional transmission electron microscopy, Thin Solid Films, 228, 257-260.
105. Peterson, M.B., Murray, S.F., and Florek, J.J. (1960), Consideration of lubricants for temperatures above 1000°F, Trans. ASLE, 2, 225-233.
106. Peterson, M.B., Calabrese S.B., and Stupp, B. (1982), Lubrication with Naturally Occurring Double Oxide Films, Office of Naval Research, Final Report, Contract No: N00014-82-C-0247.
107. Peterson, M.B., Li, S.Z., and Murray, S.F. (1994), Wear Resisting Oxide Films for 900°C, Final Report, Argonne National Laboratory, ANL/OTM/CR-5.
108. Peterson, M.B. (1953), Friction and Wear Investigation of Molybdenum Disulfide. I. Effect of Moisture, NACA TN-3055.
109. Peterson, M.B., Calabrese, S.J., Li, S.Z., and Jiang, X.X. (1994), Friction of alloys at high temperature, J. Mater. Sci. Technol., 10, 313-318.
110. Phillips, J.C. (1969), Excitonic instabilities and bond theory of III-VI sandwich semiconductors, Phys. Rev., 188, 1225-1228.
111. Prasad, S.V., Zabinski, J.S., and McDevitt, N.T. (1995), Friction behavior of pulsed laser deposited tungsten disulfide films, Tribol. Trans., 38, 57-62.
112. Prasad, S.V. and Mecklenburg, K.R. (1994), Self-lubricating aluminum metal-matrix composites containing tungsten disulfide and silicon carbide, Lubr. Eng., 50, 511-518.
113. Prasad, S.V. and McConnell, B.D. (1991), Tribology of aluminum metal-matrix composites, Lubrication by graphite, Wear, 149, 241-253.
114. Pushpavanam, M. and Natarajan, S.R. (1995), Nickel-boron nitride electrocomposites, Metal Finish., 93, 97-99.
115. Quinn, T.F.J. and Winer, W.O. (1985), Thermal aspects of oxidational wear, Wear, 102, 67-76.
116. Rabinowicz, E. and Imai, M. (1964), Frictional properties of pyrolytic boron nitride and graphite, Wear, 7, 298-300.
117. 2 coatings, Surf. Coat. Technol., 92, 120-128.
118. 2 as potential solid-state lubricants, Nature, 387, 791-793.
119. Rohatgi, P.K., Ray, S., and Liu, Y. (1992), Tribological properties of metal matrix-graphite particle composites, Int. Mat. Rev., 37, 129-149.
120. Rowe, G.W. (1960), Some observation on the frictional behavior of boron nitride and graphite, Wear, 3, 274-285
121. Savage, R.H. (1948), Graphite lubrication, J. Appl. Phys., 19, 1-10.
122. 2S gas admixtures to room temperature air, Wear, 225, 581-586.
123. Seitzman, L.E., Singer, I.L., Bolster, R.N., and Gossett, C.R. (1992), Effect of titanium nitride interlayer on the endurance of composition of a molybdenum disulfide coating prepared by ion-beam assisted deposition, Surf. Coat. Technol., 51, 232-236.
124. 2 coatings, Thin Solid Films, 260, 143-147.
125. Seki, K., Suzuki, M., Nishimura, M., Hasegawa, M., and Moriyama, M. (1995), Performance of ball bearings operated at temperatures up to 500°C in vacuum, Lubr. Eng., 51, 753-763.
126. Sherbiney, M.A. and Halling, J. (1977), Friction and wear of ion-plated soft metallic films, Wear, 45, 211-220.
127. Simmonds, M.C., Savan, A., Van Swygenhoven, H., Pfluger, E., and Mikhailov, S. (1998), Structural, morphological, chemical and tribological investigations of sputter deposited MoSx/metal multilayer coatings, Surf. Coat. Technol., 108-109, 340-344.
128. Singer, I.L. (1992), Solid Lubrication Processes, in Fundamentals of Friction: Macroscopic and Microscopic Processes, Singer, I.L. and Pollock, H.M. (Eds.), NATO-ASI Series, Vol. 220, Kluwer Academic, London, 237-261.
129. 2S at gas pressures between 4 and 40 Pa, Tribol. Trans., 39, 950-956.
130. Singer, I.L. (1989), Solid lubricating films for extreme environments, in New Materials Approaches to Tribology, Pope, L.E., Fehrenhacher, L., and Winer, W.O. (Eds.), MRS Proc., 140, 215-226.
131. 2S gases, J. Vac. Sci. Technol. A, 14, 38-45.
132. Singer, I.L., Bolster, R.N., Seitzman, L.E., Wahl, K.J., and Mowery, R.L. (1994), Advanced Solid Lubricant Films by Ion-Beam Assisted Deposition., Naval Research Laboratory, NRL/MR/6170-94-7633.
133. Singer, I.L. (1998), How third-body processes affect friction and wear, MRS Bull., 23 (6), 37-40
134. 2 coatings, Appl. Phys. Lett., 57, 995-997.
135. Sliney, H.E. (1993), Solid lubricants, Metals Handbook, Vol. 18. Friction, Lubrication, and Wear Technology, ASM-International, Metals Park, OH, 115-122.
136. Sliney, H.E. (1982), Solid lubricant materials for high temperatures. A review, Tribol. Int., 15, 293-302.
137. Sliney, H.E., Storm, T.N., and Allen, G.P. (1965), Fluoride solid lubricants for extreme temperatures and corrosive environments, ASLE Trans., 8, 307-322.
138. Sliney, H.E. (1969), Rare Earth Fluorides and Oxides — An Exploratory Study of Their Use as Solid Lubricants at Temperatures to 1800°F, NASA TN D-5301.
139. Sliney, H.E. (1986), The use of silver in self-lubricating coatings for extreme temperatures, Trans. ASLE, 29, 370-375.
140. 2 films in relation to film morphology, Thin Solid Films, 73, 291-297.
141. 2 films sputtered from a compact target, Thin Solid Films, 118, 374-384.
142. 2 films by physical sputtering and their lubrication properties in vacuum, ASLE Trans., 12, 36-43.
143. 2 films, ASLE Trans., 14, 267-274.
144. 2 films: principles, operation and limitations, J. Mat. Eng. Perform., 1, 347-352.
145. 4 and SiC Surfaces for Increased Tribological Performance, NASA TM-207415.
146. Spalvins, T. and Sliney, H.E. (1994), Frictional Behavior and Adhesion of Ag and Au Films Applied to Aluminum Oxide by Oxygen-ion Assisted Screen Cage Ion Plating (SCIP), NASA TM-106522.
147. 2, Thin Solid Films, 84, 257-266.
148. Sutor, P. (1991), Solid lubricants: overview and recent developments, MRS Bull., 16, 24-30.
149. 2 films coated with different apparatus, Wear, 218, 110-118.
150. 2/metal composite coatings deposited by closed field magnetron sputtering, Surf. Coat. Technol., 94-95, 572-578.
151. Tenne, R., Margulis, L., Genut, M., and Hodes, G. (1992), Polyhedral and cylindrical structures of tungsten disulphide, Nature, 360, 444-445.
152. Voevodin, A.A., Bultman, J., and Zabinski, J.S. (1998), Investigation into three-dimensional laser processing of tribological coatings, Surf. Coat. Technol., 107, 12-19.
153. Voevodin, A.A., O’Neill, J.P., and Zabinski, J.S. (1999), Nanocomposite tribological coatings for aerospace applications, Surf. Coat. Technol., 119, 36-45.
154. Wahl, K.J., Seitzman, L.E., Bolster, R.N., Singer I.L., and Peterson, M.B. (1997), Ion-beam deposited Cu-Mo coatings as high temperature solid lubricants, Surf. Coat. Technol., 89, 245-251.
155. Wahl, K.J., Dunn, D.N., Singer, I.L. (1999), Wear behavior of Pb-Mo-S solid lubricating coatings, Wear, 230, 175-183.
156. Wahl, K.J, Seitzman, L.E., Bolster, R.N., and Singer, I.L. (1995), Low-friction, high-endurance, ion-beamdeposited Pb-Mo-S coatings, Surf. Coat. Technol., 73, 152-159.
157. 2 solid film lubricants by transmission electron microscopy, Thin Solid Films, 305, 130-143.
158. 2 by transmission electron microscopy, J. Mat. Res., 9, 236-245.
159. Wang, A., Sun, D.C., Stark, C., and Dumbleton, J.H. (1995), Wear mechanisms of UHMWPE in total joint replacements, Wear, 181/183, 241-249.
160. Wells, A. and De Wet, D.J. (1988), The use of platinum in thin tribological coatings, Wear, 127, 269-281.
161. Westergard, R., Ahlin, A., Axen, N., and Hogmark, S. (1998), Sliding wear and friction of Si3N4-SiCbased ceramic composites containing hexagonal boron nitride, J. Eng. Tribol., 212, 381-387.
162. Willson, B. (1992), PTFE as a friction modifier in engine oil, Ind. Lubr. Tribol., 44, 3-5.
163. Winer, W.O. (1967), Molybdenum disulfide as a lubricant: a review of the fundamental knowledge, Wear, 10, 422-452.
164. Woydt, M., Skopp, A., Dorfel, I., and Witke, K. (1999), Tribol. Trans., 42, 21-31.
165. Yu, C.-Y. and Kellett, B.J. (1996), Tribology of alumina-graphite composites, Proc. Ceramic Engineering and Science, 20th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures — American Ceramic Soc., Westerville, OH, 17, 220-227.
166. Zabinski, J.S., Donley, M.S., Prasad, S.V., and McDevitt, N.T. (1994), Synthesis and characterization of tungsten disulphide films grown by pulsed-laser deposition, J. Mater. Sci., 29, 4834-4839.
167. 2 lubricant systems using Raman spectroscopy, Wear, 165, 103-108.
168. Zabinski, J.S., Corneille, J., Prasad, S.V., McDevitt, N.T., and Bultman, J.B. (1997), Lubricious zinc oxide films: synthesis, characterization and tribological behaviour, J. Mat. Sci., 32, 5313-5319.
169. 2 films, Tribol. Trans., 38, 894-904.
170. 2 films grown by pulsed laser deposition, Thin Solid Films, 214, 156-163.
171. 2/graphite fluoride thin films grown by pulsed laser deposition Surf. Coat. Technol., 76-77, 400-406.
172. Zabinski, J.S., Saunders, J.H., Nainaparampil, J., and Prasad, S.V. (2000), Lubrication using a microstructurally engineered oxide: performance and mechanisms, Tribol. Lett., 103-116.
173. Zallen, R. and Slade, M. (1974), Rigid-layer modes in chalcogenide crystals, Phys. Rev. B., 9, 1627-1637.
174. Zhang, S.W. (1998), State-of-the-art of polymer tribology, Tribol. Int., 31, 49-60.