The influence of DLC coating on EHL friction coefficient

Tribology Letters

Volumn 47, Issue 2, 2012, Pages 285-294

  Bjorling M ^a   Isaksson, P ^a   Marklund, P ^a   Larsson, R ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

Ball on disc; Coating; Diamond like carbon (DLC); EHL; Friction; Thermal effects

Indexed keywords

BALL ON DISC; BOUNDARY LUBRICATIONS; CHEMICAL INERTNESS; COEFFICIENT OF FRICTIONS; DIAMOND-LIKE CARBON; DIAMOND-LIKE CARBON COATINGS; DLC COATINGS; EHL; EHL FRICTION; FRICTION COEFFICIENTS; HIGH ELASTIC MODULUS; HIGH HARDNESS; LOW FRICTION; LUBRICANT FILMS; MIXED LUBRICATION; SLIDE-TO-ROLL RATIO; SLIDING CONTACTS; THERMAL SIMULATIONS; TRIBOTESTER; WEAR AND CORROSION RESISTANCE; WEAR AND FRICTION;

CARBON; COATINGS; COMPUTER SIMULATION; CORROSION RESISTANCE; DISKS (MACHINE COMPONENTS); FRICTION; SHAFTS (MACHINE COMPONENTS); THERMAL EFFECTS; TRIBOLOGY;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 84864649000     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-012-9987-7     Document Type: Article

References (28)

1. Ronkainen, H., Varjus, D., Holmberg, K.: Friction and wear properties in dry, water- and oil-lubricated DLC against alumina and DLC against steel contacts. Wear 222(2), 120 (1998)
2. Zhou, Z., Li, K., Bello, I., Lee, C., Lee, S.: Study of tribological performance of ECR-CVD diamond-like carbon coatings on steel substrates. Part 2. The analysis of wear mechanism. Wear 258(10), 1589 (2005)
3. Podgornik, B., Jacobson, S., Hogmark, S.: DLC coating of boundary lubricated components-advantages of coating one of the contact surfaces rather than both or none. Tribol. Int. 36(11), 843 (2003)
4. Podgornik, B., Jacobson, S., Hogmark, S.: Influence of EP additive concentration on the tribological behaviour of DLCcoated steel surfaces. Surf. Coat. Technol. 191(2-3), 357 (2005)
5. Podgornik, B., Hren, D., Vižintin, J.: Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces. Wear 261(1), 32 (2006)
6. Mistry, K., Morina, A., Neville, A.: Tribo-chemistry of lubricated DLC coatings for engineering components under extreme-pressure contact conditions. Tribol. Lubr. Technol. 66(5), 16 (2010)
7. 2 single sheet formed by MoDTC and ZDDP lubricants. Lubr. Sci. 18(3), 141 (2006)
8. de Barros'Bochet, M., Martin, J., Le-Mogne, T., Vacher, B.: Boundary lubrication mechanisms of carbon coatings by MoDTC and ZDDP additives. Tribol. Int. 38(3), 257 (2005)
9. Miyake, S., Saito, T., Yasuda, Y., Okamato, Y., Kano, M.: Improvement of boundary lubrication properties of diamond-like carbon (DLC) films due to metal addition. Tribol. Int. 37(9), 751 (2004)
10. Haque, T., Morina, A., Neville, A., Kapadia, R., Arrowsmith, S.: Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions. Wear 266(1-2), 147 (2009)
11. Kalin, M., Roman, E., Ožbolt, L., Vižintin, J.: Metal-doped (Ti, WC) diamond-like-carbon coatings: reactions with extremepressure oil additives under tribological and static conditions. Thin Solid Films 518(15), 4336 (2010)
12. Topolovec-Miklozic, K., Lockwood, F., Spikes, H.: Behaviour of boundary lubricating additives on DLC coatings. Wear 265(11-12), 1893 (2008)
13. Yoshida, K., Horiuchi, T., Kano, M., Kumagai, M.: Effect of a tribochemical reacted film on friction and wear properties of DLC coatings. Plasma Process. Polym. 6(1), S96 (2009)
14. Renodeau, H., Papke, B., Pozebanchukz, M., Parthasarathy, P.: Tribological properties of diamond-like carbon coatings in lubricated automotive applications. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 223(3), 405 (2009)
15. Kalin, M., Vižintin, J.: Differences in the tribological mechanisms when using non-doped, metal-doped (Ti, WC), and nonmetal-doped (Si) diamond-like carbon against steel under boundary lubrication, with and without oil additives. Thin Solid Films 515(4), 2734 (2006)
16. Bobzin, K., Bagcivan, N., Goebbels, N., Yilmaz, K., Hoehn, B.R., Michaelis, K., Hochmann, M.: Lubricated PVD CrAlN and WC/C coatings for automotive applications. Surf. Coat. Technol. 204(6-7), 1097 (2009)
17. Xu, H.: Development of a generalized mechanical efficiency prediction methodology for gear pairs. PhD thesis, Graduate School of The Ohio State University (2005)
18. Evans, R., Cogdell, J., Richter, G.: Traction of lubricated rolling contacts between thin-film coatings and steel. Tribol. Trans. 52(1), 106 (2009)
19. Choo, J., Glovnea, R., Forrest, A., Spikes, H.: A low friction bearing based on liquid slip at the wall. J. Tribol. 129(3), 611 (2007)
20. Björling, M., Larsson, R., Marklund, P., Kassfeldt, E.: Elastohydrodynamic lubrication friction mapping-the influence of lubricant, roughness, speed, and slide-to-roll ratio. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 225(7), 671 (2011)
21. Larsson, R., Larsson, P., Eriksson, E., Sjoberg, M., Hoglund, E.: Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 214(1), 17 (2000)
22. Habchi, W., Eyheramendy, D., Bair, S., Vergne, P., Morales-Espejel, G.: Thermal elastohydrodynamic lubrication of point contacts using a newtonian/generalized newtonian lubricant. Tribol. lett. 30(1), 41 (2008)
23. Kim, J., Yang, H.S., Jun, Y., Kim, K.: Interfacial effect on thermal conductivity of diamond-like carbon films. J. Mech. Sci. Technol. 24(7), 1511 (2010)
24. Wojciechowski, K., Zybala, R., Mania, R.: Application of DLC layers in 3-omega thermal conductivity method. J. Achiev. Mater. Manuf. Eng. 37(2), 512 (2009)
25. Hakovirta, M., Vuorinen, J., He, X., Nastasi, M., Schwarz, R.: Heat capacity of hydrogenated diamond-like carbon films. Appl. Phys. Lett. 77(15), 2340 (2000)
26. Oka, Y., Kirinuki, M., Suzuki, T., Yatsuzuka, M., Yatsui, K.: Effect of ion beam implantation on density of DLC prepared by plasma-based ion implantation and deposition. Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. At. 242(1-2), 335 (2006)
27. Hamrock, B., Schmid, S., Jacobson, B.: Fundamentals of Fluid Film Lubrication, 2nd edn. Marcel Dekker Inc., New York (2004)
28. Hsu, C.H., Lee, R.T.: An efficient algorithm for thermal elastohydrodynamic lubrication under rolling/sliding line contacts. J. Tribol. 116(4), 762 (1994)