Indentation for evaluating cracking and delamination of thin coatings using finite element analysis

Vacuum

Volumn 122, Issue , 2015, Pages 17-30

  Xiao, Yangyi ^a   Shi, Wankai ^a   Luo, Jing ^a  

^a CHONGQING UNIVERSITY   (China)

Author keywords

Coating cracking; Cohesive zone model; Indentation; Interfacial delamination

Indexed keywords

CARBON; CRACKS; DELAMINATION; ELASTIC MODULI; FAILURE (MECHANICAL); FINITE ELEMENT METHOD; INDENTATION; THICKNESS MEASUREMENT;

COATING THICKNESS; COHESIVE STRENGTH; COHESIVE ZONE MODEL; CRITICAL THICKNESS; DIAMOND LIKE CARBON COATINGS; INTERFACE ADHESIVES; INTERFACIAL DELAMINATION; NUMERICAL RESULTS;

COATINGS;

EID: 84941286095     PISSN: 0042207X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.vacuum.2015.09.003     Document Type: Article

References (37)

1. S. Hainsworth, M. McGurk, and T. Page The effect of coating cracking on the indentation response of thin hard-coated systems Surf. Coat. Technol. 102 1998 97 107
2. S.A. Oliveira, and A.F. Bower An analysis of fracture and delamination in thin coatings subjected to contact loading Wear 198 1996 15 32
3. K. Holmberg, H. Ronkainen, A. Laukkanen, and K. Wallin Friction and wear of coated surfaces - scales, modelling and simulation of tribomechanisms Surf. Coat. Technol. 202 2007 1034 1049
4. X. Peng, and T. Clyne Mechanical stability of DLC films on metallic substrates part II - interfacial toughness, debonding and blistering Thin Solid Films 312 1998 219 227
5. J. Michler, M. Tobler, and E. Blank Thermal annealing behaviour of alloyed DLC films on steel: determination and modelling of mechanical properties Diam. Relat. Mater. 8 1999 510 516
6. A.A. Gharam, M. Lukitsch, M. Balogh, N. Irish, and A. Alpas High temperature tribological behavior of W-DLC against aluminum Surf. Coat. Technol. 206 2011 1905 1912
7. M. Swain, and J. Menčik Mechanical property characterization of thin films using spherical tipped indenters Thin Solid Films 253 1994 204 211
8. J. Michler, and E. Blank Analysis of coating fracture and substrate plasticity induced by spherical indentors: diamond and diamond-like carbon layers on steel substrates Thin Solid Films 381 2001 119 134
9. Y. Sun, A. Bloyce, and T. Bell Finite element analysis of plastic deformation of various TiN coating/substrate systems under normal contact with a rigid sphere Thin Solid Films 271 1995 122 131
10. K. Holmberg, A. Laukkanen, H. Ronkainen, K. Wallin, and S. Varjus A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces Wear 254 2003 278 291
11. X. Zhao, Z. Xie, and P. Munroe Nanoindentation of hard multilayer coatings: finite element modelling Mater. Sci. Eng. A 528 2011 1111 1116
12. M.T. Tilbrook, D.J. Paton, Z. Xie, and M. Hoffman Microstructural effects on indentation failure mechanisms in TiN coatings: finite element simulations Acta Mater. 55 2007 2489 2501
13. Z.C. Xia, and J.W. Hutchinson Crack patterns in thin films J. Mech. Phys. Solids 48 2000 1107 1131
14. S. Steffensen, and H.M. Jensen Circular channel cracks during indentation in thin films on ductile substrates Comput. Mater. Sci. 98 2015 263 270
15. A. Abdul-Baqi, and E. Van der Giessen Numerical analysis of indentation-induced cracking of brittle coatings on ductile substrates Int. J. Solids Struct. 39 2002 1427 1442
16. A. Abdul-Baqi, and E. Van der Giessen Indentation-induced interface delamination of a strong film on a ductile substrate Thin Solid Films 381 2001 143 154
17. W. Li, and T. Siegmund An analysis of the indentation test to determine the interface toughness in a weakly bonded thin film coating-substrate system Acta Mater. 52 2004 2989 2999
18. P. Liu, Y. Zhang, K. Zeng, C. Lu, and K. Lam Finite element analysis of interface delamination and buckling in thin film systems by wedge indentation Eng. Fract. Mech. 74 2007 1118 1125
19. Y. Zhang, K. Zeng, and R. Thampurun Interface delamination generated by indentation in thin film systems - a computational mechanics study Mater. Sci. Eng. A 319 2001 893 897
20. A. Voevodin, S. Walck, and J. Zabinski Architecture of multilayer nanocomposite coatings with super-hard diamond-like carbon layers for wear protection at high contact loads Wear 203 1997 516 527
21. J. Hu, Y. Chou, and R. Thompson Cohesive zone effects on coating failure evaluations of diamond-coated tools Surf. Coat. Technol. 203 2008 730 735
22. C.V. Di Leo, J. Luk-Cyr, H. Liu, K. Loeffel, K. Al-Athel, and L. Anand A new methodology for characterizing traction-separation relations for interfacial delamination of thermal barrier coatings Acta Mater. 71 2014 306 318
23. N. Chandra, H. Li, C. Shet, and H. Ghonem Some issues in the application of cohesive zone models for metal-ceramic interfaces Int. J. Solids Struct. 39 2002 2827 2855
24. P. Lemoine, J. Quinn, P. Maguire, and J. McLaughlin Tribology of Diamond-like Carbon Films 2008 Springer Science New York
25. W. Zhu, L. Yang, J. Guo, Y. Zhou, and C. Lu Determination of interfacial adhesion energies of thermal barrier coatings by compression test combined with a cohesive zone finite element model Int. J. Plasticity 64 2015 76 87
26. M. Białas, P. Majerus, R. Herzog, and Z. Mróz Numerical simulation of segmentation cracking in thermal barrier coatings by means of cohesive zone elements Mater. Sci. Eng. A 412 2005 241 251
27. C.G. Dávila, P.P. Camanho, and M.F. de Moura Mixed-mode decohesion elements for analyses of progressive delamination Proceedings of the 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Seattle, WA 2001
28. X. Li, L. Liang, J. Xie, L. Chen, and Y. Wei Thickness-dependent fracture characteristics of ceramic coatings bonded on the alloy substrates Surf. Coat. Technol. 258 2014 1039 1047
29. P.P. Camanho, and C.G. Dávila Mixed-mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials 2002
30. J. Parmigiani, and M. Thouless The roles of toughness and cohesive strength on crack deflection at interfaces J. Mech. Phys. Solids 54 2006 266 287
31. J. Wang, Y. Sugimura, A. Evans, and W. Tredway The mechanical performance of DLC films on steel substrates Thin Solid Films 325 1998 163 174
32. Z.-H. Xie, R. Singh, A. Bendavid, P. Martin, P. Munroe, and M. Hoffman Contact damage evolution in a diamond-like carbon (DLC) coating on a stainless steel substrate Thin Solid Films 515 2007 3196 3201
33. A. Ogwu, T. Coyle, T. Okpalugo, P. Kearney, P. Maguire, and J. McLaughlin The influence of biological fluids on crack spacing distribution in Si-DLC films on steel substrates Acta Mater. 51 2003 3455 3465
34. S. Parthasarathi, B. Tittmann, and R. Ianno Quantitative acoustic microscopy for characterization of the interface strength of diamond-like carbon thin films Thin Solid Films 300 1997 42 50
35. S. Xia, Y. Gao, A.F. Bower, L.C. Lev, and Y.-T. Cheng Delamination mechanism maps for a strong elastic coating on an elastic-plastic substrate subjected to contact loading Int. J. Solids Struct. 44 2007 3685 3699
36. J.W. Hutchinson, and Z. Suo Mixed mode cracking in layered materials Adv. Appl. Mech. 29 1992 191
37. N. Madsen, S. Steffensen, H. Jensen, and J. Bøttiger Toughness measurement of thin films based on circumferential cracks induced at conical indentation Int. J. Fract. 2015 1 14