Comparison of spray drying, electroblowing and electrospinning for preparation of Eudragit E and itraconazole solid dispersions

International Journal of Pharmaceutics

Volumn 494, Issue 1, 2015, Pages 23-30

  Sóti, Péter Lajos ^a   Bocz, Katalin ^a   Pataki, Hajnalka ^a   Eke, Zsuzsanna ^b   Farkas, Attila ^a   Verreck, Geert ^c   Kiss, Éva ^b   Fekete, Pál ^a,d   Vigh, Tamás ^a   Wagner, István ^a   Nagy, Zsombor K ^a   Marosi, György ^a  

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

^b EÖTVÖS LORÁND UNIVERSITY   (Hungary)

^c JANSSEN RESEARCH AND DEVELOPMENT   (Belgium)

^d Ady Endre Str 1   (Hungary)

Author keywords

Electroblowing; Electrospinning; Itraconazole; Raman mapping; Rapid dissolution; Spray drying

Indexed keywords

EUDRAGIT; ITRACONAZOLE; DRUG CARRIER; EUDRAGIT-E; METHACRYLIC ACID METHYL ESTER; METHYLMETHACRYLATE-METHACRYLIC ACID COPOLYMER; POLYMER; POLYMETHACRYLIC ACID DERIVATIVE; POWDER; SOLVENT;

ARTICLE; CONTACT ANGLE; CONTROLLED STUDY; DIFFERENTIAL SCANNING CALORIMETRY; DISPERSION; DRUG RELEASE; DRUG SOLUBILITY; ELECTROBLOWING; ELECTROSPINNING; EVAPORATION; INTERMETHOD COMPARISON; MASS FRAGMENTOGRAPHY; PHASE SEPARATION; PRIORITY JOURNAL; ROOM TEMPERATURE; SCANNING ELECTRON MICROSCOPY; SOLID; SPRAY DRYING; WETTABILITY; X RAY POWDER DIFFRACTION; CHEMISTRY; COMPARATIVE STUDY; DESICCATION; MEDICINAL CHEMISTRY; PHARMACEUTICS; POWDER; PROCEDURES; SOLUBILITY; X RAY DIFFRACTION;

CALORIMETRY, DIFFERENTIAL SCANNING; CHEMISTRY, PHARMACEUTICAL; DESICCATION; DRUG CARRIERS; ITRACONAZOLE; METHYLMETHACRYLATES; POLYMERS; POLYMETHACRYLIC ACIDS; POWDERS; SOLUBILITY; SOLVENTS; TECHNOLOGY, PHARMACEUTICAL; WETTABILITY; X-RAY DIFFRACTION;

EID: 84939475503     PISSN: 03785173     EISSN: 18733476     Source Type: Journal    
DOI: 10.1016/j.ijpharm.2015.07.076     Document Type: Article

References (39)

1. S. Agharkar, S. Lindenbaum, and T. Higuchi Enhancement of solubility of drug salts by hydrophilic counterions: properties of organic salts of an antimalarial drug J. Pharm. Sci. 65 1976 747 749 10.1002/jps.2600650533
2. K. Amin, R.-M. Dannenfelser, J. Zielinski, and B. Wang Lyophilization of polyethylene glycol mixtures J. Pharm. Sci. 93 2004 2244 2249 10.1002/jps.20135
3. A.C. Anselmo, and S. Mitragotri An overview of clinical and commercial impact of drug delivery systems J. Control. Release 190 2014 15 28 10.1016/j.jconrel.2014.03.053
4. A.F. Asker, and C.H. Becker Some spray-dried formulations of sulfaethylthiadiazole for prolonged-release medication J. Pharm. Sci. 55 1966 90 94 10.1002/jps.2600550119
5. A. Balogh, T. Horváthová, Z. Fülöp, T. Loftsson, A.H. Harasztos, G. Marosi, and Z.K. Nagy Electroblowing and electrospinning of fibrous diclofenac sodium-cyclodextrin complex-based reconstitution injection J. Drug Deliv. Sci. Technol. 26 2015 28 34 10.1016/j.jddst.2015.02.003
6. J. Broadhead, S.K. Edmond Rouan, and C.T. Rhodes The spray drying of pharmaceuticals Drug Dev. Ind. Pharm. 8 1992 1169 1206 10.3109/03639049209046327
7. K. Cal, and K. Sollohub Spray drying technique. I: hardware and process parameters J. Pharm. Sci. 99 2010 575 586 10.1002/jps
8. R. Casella, D.A. Williams, and S.S. Jambhekar Solid-state β-cyclodextrin complexes containing indomethacin, ammonia and water. I. Formation studies Int. J. Pharm. 165 1998 1 14 10.1016/S0378-5173(97)00330-X
9. C. Draheim, F. de Crécy, S. Hansen, E.-M. Collnot, and C.-M. Lehr A design of experiment study of nanoprecipitation and nano spray drying as processes to prepare PLGA nano- and microparticles with defined sizes and size distributions Pharm. Res. 2015 10.1007/s11095-015-1647-9
10. A. Fahr, and X. Liu Drug delivery strategies for poorly water-soluble drugs Expert Opin. Drug Deliv. 4 2007 403 416 10.1517/17425247.4.4.403
11. M.C. Fontana, T.L. Durli, A.R. Pohlmann, S.S. Guterres, and R.C.R. Beck Polymeric controlled release inhalable powder produced by vibrational spray-drying: one-step preparation and in vitro lung deposition Powder Technol. 258 2014 49 59 10.1016/j.powtec.2014.03.011
12. A. Glasmacher, and A. Prentice Current experience with itraconazole in neutropenic patients: a concise overview of pharmacological properties and use in prophylactic and empirical antifungal therapy Clin. Microbiol. Infect. 12 2006 84 90 10.1111/j.1469-0691.2006.01609.x
13. A.J. Humberstone, and W.N. Charman Lipid-based vehicles for the oral delivery of poorly water soluble drugs Adv. Drug Deliv. Rev. 25 1997 103 128 10.1016/S0169-409X(96)00494-2
14. F. Ignatious, L. Sun, C.-P. Lee, and J. Baldoni Electrospun nanofibers in oral drug delivery Pharm. Res. 27 2010 576 588 10.1007/s11095-010-0061-6
15. S. Janssens, A. De Zeure, A. Paudel, J. Van Humbeeck, P. Rombaut, and G. Van den Mooter Influence of preparation methods on solid state supersaturation of amorphous solid dispersions: a case study with itraconazole and Eudragit E100 Pharm. Res. 27 2010 775 785 10.1007/s11095-010-0069-y
16. J.Y. Jung, S.D. Yoo, S.H. Lee, K.H. Kim, D.S. Yoon, and K.H. Lee Enhanced solubility and dissolution rate of itraconazole by a solid dispersion technique Int. J. Pharm. 187 1999 209 218
17. Y. Kawabata, K. Wada, M. Nakatani, S. Yamada, and S. Onoue Formulation design for poorly water-soluble drugs based on biopharmaceutics classification system: basic approaches and practical applications Int. J. Pharm. 420 1 2011 1 10 10.1016/j.ijpharm.2011.08.032
18. E.-R. Kenawy, G.L. Bowlin, K. Mansfield, J. Layman, D.G. Simpson, E.H. Sanders, and G.E. Wnek Release of tetracycline hydrochloride from electrospun poly(ethylene-co-vinylacetate), poly(lactic acid), and a blend J. Control. Release 81 2002 57 64 10.1016/S0168-3659(02)00041-X
19. Kim, Y.M., Sung, Y., Bin, Jang, R.S., Ahn, K.R., 2003. A manufacturing device and the method of preparing for the nanofibers via electroblowing spinning process. WO 03/080905 A1.
20. R. Macarron Critical review of the role of HTS in drug discovery Drug Discov. Today 11 2006 277 279 10.1016/j.drudis.2006.02.001
21. Z.K. Nagy, K. Nyúl, I. Wagner, K. Molnár, and G. Marosi Electrospun water soluble polymer mat for ultrafast release of Donepezil HCl Express Polym. Lett. 4 2010 763 772 10.3144/expresspolymlett.2010.92
22. Z.K. Nagy, A. Balogh, B. Démuth, H. Pataki, T. Vigh, B. Szabó, K. Molnár, B.T. Schmidt, P. Horák, G. Marosi, G. Verreck, I. Van Assche, and M.E. Brewster High speed electrospinning for scaled-up production of amorphous solid dispersion of itraconazole Int. J. Pharm. 480 2015 137 142 10.1016/j.ijpharm.2015.01.025
23. A.L. Sarode, P. Wang, S. Obara, and D.R. Worthen Supersaturation, nucleation, and crystal growth during single- and biphasic dissolution of amorphous solid dispersions: polymer effects and implications for oral bioavailability enhancement of poorly water soluble drugs Eur. J. Pharm. Biopharm. 86 2014 351 360 10.1016/j.ejpb.2013.10.005
24. K. Sekiguchi, N. Obi, and Y. Ueda Studies on absorption of eutectic mixture. II. Absorption of fused conglomerates of chloramphenicol and urea in rabbits Chem. Pharm. Bull. 12 1964 134 144
25. A.P. Simonelli, S.C. Mehta, and W.I. Higuchi Dissolution rates of high energy polyvinylpyrrolidone (PVP) sulfathiazole coprecipitates J. Pharm. Sci. 58 1969 538 549 10.1002/jps.2600580503
26. K. Six, C. Leuner, J. Dressman, G. Verreck, J. Peeters, N. Blaton, P. Augustijns, R. Kinget, and G. Van den Mooter Thermal properties of hot-stage extrudates of itraconazole and Eudragit E100. Phase separation and polymorphism J. Therm. Anal. Calorim. 68 2002 591 601 10.1023/A:1016056222881
27. K. Six, H. Berghmans, C. Leuner, J. Dressman, K. Van Werde, J. Mullens, L. Benoist, M. Thimon, L. Meublat, G. Verreck, J. Peeters, M. Brewster, and G. Van den Mooter Characterization of solid dispersions of itraconazole and hydroxypropylmethylcellulose prepared by melt extrusion, part II Pharm. Res. 20 2003 1047 1054
28. P.L. Sóti, Z.K. Nagy, G. Serneels, B. Vajna, A. Farkas, F. Van der Gucht, P. Fekete, T. Vigh, I. Wagner, A. Balogh, H. Pataki, G. Mezo, and G. Marosi Preparation and comparison of spray dried and electrospun bioresorbable drug delivery systems Eur. Polym. J. 2015 10.1016/j.eurpolymj.2015.03.035
29. V.P. Torchilin Micellar nanocarriers: pharmaceutical perspectives Pharm. Res. 24 1 2007 1 16 10.1007/s11095-006-9132-0
30. D.J. Van Drooge, W.L.J. Hinrichs, M.R. Visser, and H.W. Frijlink Characterization of the molecular distribution of drugs in glassy solid dispersions at the nano-meter scale, using differential scanning calorimetry and gravimetric water vapour sorption techniques Int. J. Pharm. 310 2006 220 229 10.1016/j.ijpharm.2005.12.007
31. T. Vasconcelos, B. Sarmento, and P. Costa Solid dispersions as strategy to improve oral bioavailability of poor water soluble drugs Drug Discov. Today 12 2007 1068 1075 10.1016/j.drudis.2007.09.005
32. T. Vigh, T. Horváthová, A. Balogh, P.L. Sóti, G. Drávavölgyi, Z.K. Nagy, and G. Marosi Polymer-free and polyvinylpirrolidone-based electrospun solid dosage forms for drug dissolution enhancement Eur. J. Pharm. Sci. 49 2013 595 602 10.1016/j.ejps.2013.04.034
33. W.R. Whitney, and A.A. Noyes The rate of solution of solide substances in thier own solutions J. Am. Chem. Soc. 19 12 1897 930 934 10.1021/ja02086a003
34. S.M. Wong, I.W. Kellaway, and S. Murdan Enhancement of the dissolution rate and oral absorption of a poorly water soluble drug by formation of surfactant-containing microparticles Int. J. Pharm. 317 2006 61 68 10.1016/j.ijpharm.2006.03.001
35. C.-Y. Wu, and L.Z. Benet Predicting drug disposition via application of BCS: transport/absorption/elimination interplay and development of a biopharmaceutics drug disposition classification system Pharm. Res. 22 2005 11 23 10.1007/s11095-004-9004-4
36. D.-G. Yu, J.-M. Yang, C. Branford-White, P. Lu, L. Zhang, and L.-M. Zhu Third generation solid dispersions of ferulic acid in electrospun composite nanofibers Int. J. Pharm. 400 2010 158 164 10.1016/j.ijpharm.2010.08.010
37. D.-G. Yu, L.-M. Zhu, C.J. Branford-White, J.-H. Yang, X. Wang, Y. Li, and W. Qian Solid dispersions in the form of electrospun core-sheath nanofibers Int. J. Nanomed. 6 2011 3271 3280 10.2147/IJN.S27468
38. D.-G. Yu, X. Wang, X.Y. Li, W. Chian, Y. Li, and Y.Z. Liao Electrospun biphasic drug release polyvinylpyrrolidone/ethyl cellulose core/sheath nanofibers Acta Biomater. 9 2013 5665 5672 10.1016/j.actbio.2012.10.021
39. F.-L. Zhou, R.-H. Gong, and I. Porat Mass production of nanofibre assemblies by electrostatic spinning Polym. Int. 58 2009 331 342 10.1002/pi.2521