Coating and drying processes for functional films in polymer solar cells: From laboratory to pilot scale

Coating and Drying Processes for Functional Films in Polymer Solar Cells: From Laboratory to Pilot Scale

Volumn , Issue , 2014, Pages 1-218

  Wengeler, Lukas ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

DRYING; PLASTIC COATINGS; POLYMER FILMS; SOLAR CELLS;

COATING METHODS; EXPERIMENTAL SET UP; FILM PROPERTIES; FUNCTIONAL FILMS; PROCESS PARAMETERS; PROCESS STABILITY; ROLL-TO-ROLL PROCESSING; SOLVENT COMPOSITION;

POLYMER SOLAR CELLS;

EID: 84938517661     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.5445/KSP/1000039966     Document Type: Book

References (140)

1. Aernouts, T., T. Aleksandrov, et al. (2008). "Polymer based organic solar cells using ink-jet printed active layers." Applied Physics Letters 92: 033306.
2. Angmo, D., M. Hösel, et al. (2012). "All solution processing of ITO-free organic solar cell modules directly on barrier foil." Solar Energy Materials and Solar Cells.
3. Blankenburg, L., K. Schultheis, et al. (2009). "Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells." Solar Energy Materials and Solar Cells 93(4): 476-483.
4. Brabec, C. J. (2004). "Organic photovoltaics: technology and market." Solar Energy Materials and Solar Cells 83(2): 273-292.
5. Brabec, C. J. (2008). Organic photovoltaics materials, device physics, and manufacturing technologies. Weinheim, Wiley-VCH-Verl.
6. Brabec, C. J., A. Cravino, et al. (2001). "Origin of the open circuit voltage of plastic solar cells." Advanced Functional Materials 11(5): 374-380.
7. Buss, F., B. Schmidt-Hansberg, et al. (2013). Trocknung und Strukturbildung von Polymersolarzellen (Poster). Jahrestreffen der Fachgruppe Trocknungstechnik Magdeburg, Germany.
8. Cavadini, P., J. Krenn, et al. (2012a). "Investigation of surface deformation during drying of thin polymer films due to Marangoni convection." Chemical Engineering and Processing: Process Intensification.
9. Cavadini, P., W. Schabel, et al. (2013a). Device for transferring heat or mass, comprising hexagonal jet nozzles, and method for treating surface layers., WO Patent 2,013,045,026.
10. Cavadini, P., P. Scharfer, et al. (2012b). Investigation of heat transfer within an array of impinging jets with local extraction of spent fluid. 16th International Coating Science and Technology (ISCST) Symposium, Atlanta, GA.
11. Cavadini, P., P. Scharfer, et al. (2013b). Numerical and experimental investigation of the heat transfer coefficient distribution at target plate under an array of impinging jets with local removal of the spent fluid. 10th European Coating Symposium, Mons, Belgium.
12. Chang, C.-C., C.-L. Pai, et al. (2005). "Spin coating of conjugated polymers for electronic and optoelectronic applications." Thin Solid Films 479(1): 254-260.
13. Chang, Y. H., S. R. Tseng, et al. (2009). "Polymer solar cell by blade coating." Organic Electronics 10(5): 741-746.
14. Chen, H.-Y., J. Hou, et al. (2009). "Polymer solar cells with enhanced open-circuit voltage and efficiency." Nat Photon 3(11): 649-653.
15. Coatema-GmbH (2010). Base Coater - Manual - Volume 1 and 2. Dormagen.
16. Colsmann, A. (2008). Ladungstransportschichten für effiziente organische Halbleiterbauelemente. Karlsruhe, Universitätsverlag Karlsruhe.
17. Colsmann, A., A. Puetz, et al. (2011). "Efficient Semi-Transparent Organic Solar Cells with Good Transparency Color Perception and Rendering Properties." Advanced Energy Materials 1(4): 599-603.
18. Connors, K. A. and J. L. Wright (1989). "Dependence of surface tension on composition of binary aqueous-organic solutions." Analytical Chemistry 61(3): 194-198.
19. Conti, J. and P. Holtberg (2011). "International energy outlook 2011." US Energy Information Administration 5.
20. Cros, S., R. De Bettignies, et al. (2011). "Definition of encapsulation barrier requirements: A method applied to organic solar cells." Solar Energy Materials and Solar Cells 95: S65-S69.
21. Darmstädter, P. (2012). Konstruktion und Inbetriebnahme eines Gravurwalzenmoduls zur Beschichtung halbleitender Filme für polymerbasierte Solarzellen. Institut für Thermische Verfahrenstechnik, Karlsruher Institut für Technologie.
22. De Gennes, P.-G. (1985). "Wetting: statics and dynamics." Reviews of Modern Physics 57(3): 827.
23. Dennler, G., C. Lungenschmied, et al. (2006). "A new encapsulation solution for flexible organic solar cells." Thin Solid Films 511: 349-353.
24. Dennler, G., M. C. Scharber, et al. (2009). "Polymer-Fullerene Bulk-Heterojunction Solar Cells." Advanced Materials 21(13): 1323-1338.
25. Dimitriev, O. P., D. A. Grinko, et al. (2009). "PEDOT:PSS films-Effect of organic solvent additives and annealing on the film conductivity." Synthetic Metals 159(21-22): 2237-2239.
26. Dixit, S. K., S. Madan, et al. (2012). "Bulk heterojunction formation with induced concentration gradient from a bilayer structure of P3HT: CdSe/ZnS quantum dots using interdiffusion process for developing high efficiency solar cell." Organic Electronics 13(4): 710-714.
27. Döll, H. (2009). Development Coater - Technical documentation. T.-T. Engineering. Murgenthal.
28. Döll, H. (2013). Angabe zu ungefährer Genauigkeit des Lippen-Substratabstand.
29. Durst, F. and H.-G. Wagner (1997). Slot coating. Liquid Film Coating, Springer: 401-426.
30. Duvivier, D., T. D. Blake, et al. (2013). "Toward a Predictive Theory of Wetting Dynamics." Langmuir 29(32): 10132-10140.
31. Eastman, S. A., S. Kim, et al. (2012). "Effect of Confinement on Structure, Water Solubility, and Water Transport in Nafion Thin Films." Macromolecules 45(19): 7920-7930.
32. Eastoe, J. and J. S. Dalton (2000). "Dynamic surface tension and adsorption mechanisms of surfactants at the air-water interface." Advances in Colloid and Interface Science 85(2-3): 103-144.
33. Eom, S. H., H. Park, et al. (2010). "High efficiency polymer solar cells via sequential inkjetprinting of PEDOT: PSS and P3HT: PCBM inks with additives." Organic Electronics 11(9): 1516-1522.
34. Europe, S. S. E. I. f. (2012). "Alarming situation for european solar companies." from http://www.prosun.org/en/fair-competition/alarming-situation.html.
35. Florschuetz, L., D. Metzger, et al. (1981). "Streamwise flow and heat transfer distributions for jet array impingement with crossflow." Galagan, Y., E. W. Coenen, et al. (2012). "Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells." Solar Energy Materials and Solar Cells 104: 32-38.
36. Galagan, Y., I. G. de Vries, et al. (2011). "Technology development for roll-to-roll production of organic photovoltaics." Chemical Engineering and Processing 50(5-6): 454-461.
37. Gonzalez, B., N. Calvar, et al. (2007). "Density, dynamic viscosity, and derived properties of binary mixtures of methanol or ethanol with water, ethyl acetate, and methyl acetate at T=(293.15, 298.15, and 303.15) K." Journal of Chemical Thermodynamics 39(12): 1578-1588.
38. Griese, D. (2011). Untersuchung der Beschichtung funktionaler Schichten für organische Leuchtdioden. Institut für Thermische Verfahrenstechnik. Karlsruhe, Karlsruher Institut für Technologie. Studienarbeit.
39. Gutoff, E. B. and E. D. Cohen (2006). Coating and drying defects: troubleshooting operating problems, Wiley-Interscience.
40. Helgesen, M., R. Sondergaard, et al. (2010). "Advanced materials and processes for polymer solar cell devices." Journal of Materials Chemistry 20(1): 36-60.
41. Hlawacek, G. (2005). "Kontaktwinkelmessung." Retrieved 24.07., 2013, from http://institute.unileoben.ac.at/physik/Me%DFtechnik/Kontaktwinkelmessung.pdf.
42. Hoth, C. N., S. A. Choulis, et al. (2009a). "On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells." Journal of Materials Chemistry 19(30): 5398-5404.
43. Hoth, C. N., R. Steim, et al. (2009b). "Topographical and morphological aspects of spray coated organic photovoltaics." Organic Electronics 10(4): 587-593.
44. Hotz, C. (2012). "Inbetriebnahme und Einstellung der Prozessparameter einer Batch-Anlage zur inerten Beschichtung von organische Leuchtdioden." Studienarbeit, Karlsuher Institut für Technologie.
45. Hou, J., M.-H. Park, et al. (2008). "Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo [1, 2-b: 4, 5-b'] dithiophene." Macromolecules 41(16): 6012-6018.
46. Hua, X. Y. and M. J. Rosen (1988). "Dynamic surface tension of aqueous surfactant solutions: I. Basic paremeters." Journal of Colloid and Interface Science 124(2): 652-659.
47. Huang, J., P. F. Miller, et al. (2005). "Investigation of the Effects of Doping and Post- Deposition Treatments on the Conductivity, Morphology, and Work Function of Poly (3, 4-ethylenedioxythiophene)/Poly (styrene sulfonate) Films." Advanced Functional Materials 15(2): 290-296.
48. Irwin, M. D., D. B. Buchholz, et al. (2008). "p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells." Proceedings of the National Academy of Sciences 105(8): 2783-2787.
49. Jakubka, F., M. Heyder, et al. (2013). "Determining the coating speed limitations for organic photovoltaic inks." Solar Energy Materials and Solar Cells 109: 120-125.
50. Jasper, J. J. (1972). "The Surface Tension of Pure Liquid Compounds." Journal of Physical and Chemical Reference Data 1(4): 841-1010.
51. Jørgensen, M., K. Norrman, et al. (2008). "Stability/degradation of polymer solar cells." Solar Energy Materials and Solar Cells 92(7): 686-714.
52. Joskow, P. L. and J. E. Parsons (2012). "The future of nuclear power after Fukushima." Kapur, N. (2003). "A parametric study of direct gravure coating." Chemical Engineering Science 58(13): 2875-2882.
53. Keddie, J. and A. F. Routh (2010). Fundamentals of latex film formation: processes and properties, Springer.
54. Khan, A., M. Kasagi, et al. (1982.). Heat transfer augmentation in an axisymmetric impinging jet. Proceedings of the seventh international heat transfer conference., Hemisphere, New York.
55. Kim, H., W. W. So, et al. (2007a). "The importance of post-annealing process in the device performance of poly(3-hexylthiophene): Methanofullerene polymer solar cell." Solar Energy Materials and Solar Cells 91(7): 581-587.
56. Kim, S. S., S. I. Na, et al. (2007b). "Efficient polymer solar cells fabricated by simple brush painting." Advanced Materials 19(24): 4410-4415.
57. Kim, Y. H., C. Sachse, et al. (2011). "Highly Conductive PEDOT: PSS Electrode with Optimized Solvent and Thermal Post-Treatment for ITO-Free Organic Solar Cells." Advanced Functional Materials 21(6): 1076-1081.
58. Kistler, S. F. and P. M. Schweizer (1997). Liquid Film Coating. London, Chapman and Hall Kopola, P., T. Aernouts, et al. (2010). "High efficient plastic solar cells fabricated with a highthroughput gravure printing method." Solar Energy Materials and Solar Cells 94(10): 1673-1680.
59. Kopola, P., M. Tuomikoski, et al. (2009). "Gravure printed organic light emitting diodes for lighting applications." Thin Solid Films 517(19): 5757-5762.
60. Krebs, F. C. (2009a). "Fabrication and processing of polymer solar cells: A review of printing and coating techniques." Solar Energy Materials and Solar Cells 93(4): 394-412.
61. Krebs, F. C. (2009b). "Polymer solar cell modules prepared using roll-to-roll methods: Knifeover-edge coating, slot-die coating and screen printing." Solar Energy Materials and Solar Cells 93(4): 465-475.
62. Krebs, F. C. (2009c). "Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide." Solar Energy Materials and Solar Cells 93(9): 1636-1641.
63. Krebs, F. C., M. Jorgensen, et al. (2009). "A complete process for production of flexible large area polymer solar cells entirely using screen printing-First public demonstration." Solar Energy Materials and Solar Cells 93(4): 422-441.
64. Kumar, S. and G. D. Scholes (2008). "Colloidal nanocrystal solar cells." Microchimica Acta 160(3): 315-325.
65. Kumberg, J. (2012). Thermische Behandlung von Polymer-Nanopartikel-Filmen zur Verbesserung der opto-elektrischen Eigenschaften in Polymersolarzellen. Institut für Thermische Verfahrenstechnik. Karlsruhe, Universität Karlsruhe - KIT (TH). Bachelorarbeit.
66. Lee, K.-Y., L.-D. Liu, et al. (1992). "Minimum wet thickness in extrusion slot coating." Chemical Engineering Science 47(7): 1703-1713.
67. Li, G., V. Shrotriya, et al. (2005). "High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends." Nat Mater 4(11): 864-868.
68. Lightfood, T. (2009). Gravure Coating. European Coating Symposium: Short Course. Karlsruhe, Germany.
69. Lin, Y., Y. Li, et al. (2012). "Small molecule semiconductors for high-efficiency organic photovoltaics." Chemical Society Reviews 41(11): 4245-4272.
70. Lunt, R. R., N. C. Giebink, et al. (2009). "Exciton diffusion lengths of organic semiconductor thin films measured by spectrally resolved photoluminescence quenching." Journal of Applied Physics 105(5): 053711-053711-053717.
71. Ma, C. (2012). Charakterisierung von Elektroden für Lithium-Ionen-Batterien -Parameterstudie, Karlsruher Institut für Technologie. Diplomarbeit.
72. Ma, W., C. Yang, et al. (2005). "Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology." Advanced Functional Materials 15(10): 1617-1622.
73. Machui, F., S. Langner, et al. (2012). "Determination of the P3HT: PCBM solubility parameters via a binary solvent gradient method: Impact of solubility on the photovoltaic performance." Solar Energy Materials and Solar Cells 100: 138-146.
74. Macosko, C. and R. Larson (1994). Rheology: principles, measurements, and applications. New York, WILEY-VCH.
75. Martin, H. (2002). Gk1-6: Wärmeübertragung in Prallströmung. VDI-Wärmeatlas: Berechnungsunterlagen Für Druckverlust, Wärme-und Stoffübergang. Berlin, Springer DE. 1.
76. Mihailetchi, V. D., H. X. Xie, et al. (2006). "Origin of the enhanced performance in poly(3-hexylthiophene): [6,6]-phenyl C-61-butyric acid methyl ester solar cells upon slow drying of the active layer." Applied Physics Letters 89(1): -.
77. Miller, S., G. Fanchini, et al. (2008). "Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing." Journal of Materials Chemistry 18(3): 306-312.
78. National-Geographic-Online. (2012). "Solar Energy." Retrieved 19.11., from http://environment.nationalgeographic.com/environment/global-warming/solar-powerprofile/.
79. Owens, D. K. and R. C. Wendt (1969). "Estimation of Surface Free Energy of Polymers." Journal of Applied Polymer Science 13(8): 1741-&.
80. Park, H. J., M. G. Kang, et al. (2010). "A Facile Route to Polymer Solar Cells with Optimum Morphology Readily Applicable to a Roll-to-Roll Process without Sacrificing High Device Performances." Advanced Materials.
81. Pearson, A. J., T. Wang, et al. (2012). "Rationalizing phase transitions with thermal annealing temperatures for P3HT: PCBM organic photovoltaic devices." Macromolecules 45(3): 1499-1508.
82. Peet, J., M. L. Senatore, et al. (2009). "The Role of Processing in the Fabrication and Optimization of Plastic Solar Cells." Advanced Materials 21(14-15): 1521-1527.
83. Peters, K. (2013). Liquid film coating of small molecule OLEDs. Institut für Thermische Verfahrenstechnik - Thin Film Technology. Karlsruhe, Karlsruher Institut für Technologie (KIT). Dr.-Ing.
84. Roesch, R., K.-R. Eberhardt, et al. (2013). "Polymer solar cells with enhanced lifetime by improved electrode stability and sealing." Solar Energy Materials and Solar Cells 117: 59-66.
85. Romero, O., W. Suszynski, et al. (2004). "Low-flow limit in slot coating of dilute solutions of high molecular weight polymer." Journal of Non-Newtonian Fluid Mechanics 118(2): 137-156.
86. Ruschak, K. J. (1976). "Limiting flow in a pre-metered coating device." Chemical Engineering Science 31(11): 1057-1060.
87. Sanyal, M., B. Schmidt-Hansberg, et al. (2011a). "Effect of photovoltaic polymer/fullerene blend composition ratio on microstructure evolution during film solidification investigated in real time by X-ray diffraction." Macromolecules 44(10): 3795-3800.
88. Sanyal, M., B. Schmidt-Hansberg, et al. (2011b). "In Situ X-Ray Study of Drying-Temperature Influence on the Structural Evolution of Bulk-Heterojunction Polymer-Fullerene Solar Cells Processed by Doctor-Blading." Advanced Energy Materials 1(3): 363-367.
89. Schabel, W. and H. Martin (2010). G10 Impinging Jet Flow Heat Transfer. VDI Heat Atlas, Springer: 745-752.
90. Scharber, M. C., D. Mühlbacher, et al. (2006). "Design rules for donors in bulk-heterojunction solar cells-Towards 10% energy-conversion efficiency." Advanced Materials 18(6): 789-794.
91. Schlegel, U. (2011). Numerische Untersuchungen des Stoffübergangs in Prallstrahlsystemen bei simultaner Absaugung. Institut für Thermische Verfahrenstechnik, Karlsruher Institut für Technologie.
92. Schmidt-Hansberg, B. (2012). Process-structure-property Relationship of Polymer-fullerene Bulk Heterojunction Films for Organic Solar Cells: Drying Process, Film Structure and Optoelectronic Properties, Cuvillier.
93. Schmidt-Hansberg, B., M. Baunach, et al. (2011a). "Spatially resolved drying kinetics of multicomponent solution cast films for organic electronics." Chemical Engineering and Processing: Process Intensification 50(5): 509-515.
94. Schmidt-Hansberg, B., H. Do, et al. (2009a). "Drying of thin film polymer solar cells." European Physical Journal-Special Topics 166: 49-53.
95. Schmidt-Hansberg, B., M. F. G. Klein, et al. (2009b). "In situ monitoring the drying kinetics of knife coated polymer-fullerene films for organic solar cells." Journal of Applied Physics 106(12): -.
96. Schmidt-Hansberg, B., M. Sanyal, et al. (2012). "Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer-fullerene solar cells." Solar Energy Materials and Solar Cells 96: 195-201.
97. Schmidt-Hansberg, B., M. Sanyal, et al. (2011b). "Moving through the phase diagram: morphology formation in solution cast polymer-fullerene blend films for organic solar cells." Acs Nano 5(11): 8579-8590.
98. Schmidt-Hansberg, B., M. Sanyal, et al. (2011c). "Moving through the Phase Diagram: Morphology Formation in Solution Cast Polymer-Fullerene Blend Films for Organic Solar Cells." Acs Nano 5(11): 8579-8590.
99. Schmitt, M., M. Baunach, et al. (2013). "Slot-die processing of lithium-ion battery electrodes-Coating window characterization." Chemical Engineering and Processing: Process Intensification 68(0): 32-37.
100. Schrödner, M., S. Sensfuss, et al. (2012). "Reel-to-reel wet coating by variation of solvents and compounds of photoactive inks for polymer solar cell production." Solar Energy Materials and Solar Cells 107(0): 283-291.
101. Service, R. F. (2011). "Outlook Brightens for Plastic Solar Cells." Science 332(6027): 293.
102. Shaheen, S. E., C. J. Brabec, et al. (2001a). "2.5% efficient organic plastic solar cells." Applied Physics Letters 78(6): 841-843.
103. Shaheen, S. E., R. Radspinner, et al. (2001b). "Fabrication of bulk heterojunction plastic solar cells by screen printing." Applied Physics Letters 79(18): 2996-2998.
104. Sharma, A. and E. Ruckenstein (1990). "Energetic criteria for the breakup of liquid films on nonwetting solid surfaces." Journal of Colloid and Interface Science 137(2): 433-445.
105. Sigma-Aldrich. (2013). "Product Category: Organic and Printed Electronics." Retrieved 12.07., 2013, from http://www.sigmaaldrich.com.
106. Smits, F. (1958). "Measurement of sheet resistivities with the four-point probe." Bell Syst. Tech. J 37(3): 711-718.
107. Snoeijer, J. H. and B. Andreotti (2013). "Moving contact lines: Scales, regimes, and dynamical transitions." Annual review of fluid mechanics 45: 269-292.
108. Solarwirtschaft, B. (2013). "Photovoltaik Preisindex." Retrieved 01.06., 2013, from http://www.solarwirtschaft.de/preisindex.
109. Søndergaard, R., M. Hösel, et al. (2012a). "Roll-to-roll fabrication of polymer solar cells." Materials Today 15(1): 36-49.
110. Søndergaard, R., M. Hösel, et al. (2012b). "Roll-to-roll fabrication of polymer solar cells." Materials Today 15(1-2): 36-49.
111. Søndergaard, R. R., M. Hösel, et al. (2013). "Roll-to-Roll fabrication of large area functional organic materials." Journal of Polymer Science Part B: Polymer Physics 51(1): 16-34.
112. Stephan, I. K. (1994). Konvektiver Wärme-und Stoffübergang. Strömungen mit Phasenumwandlungen. Wärme-und Stoffübertragung, Springer: 415-515.
113. Sun, B. and H. Sirringhaus (2006). "Surface tension and fluid flow driven self-assembly of ordered ZnO nanorod films for high-performance field effect transistors." Journal of the American Chemical Society 128(50): 16231-16237.
114. Susanna, G., L. Salamandra, et al. (2011). "Airbrush spray-coating of polymer bulkheterojunction solar cells." Solar Energy Materials and Solar Cells 95(7): 1775-1778.
115. Takano, T., H. Masunaga, et al. (2012). "PEDOT Nanocrystal in Highly Conductive PEDOT: PSS Polymer Films." Macromolecules 45(9): 3859-3865.
116. Teja, A. S. and P. Rice (1981). "Generalized Corresponding States Method for the Viscosities of Liquid-Mixtures." Industrial & Engineering Chemistry Fundamentals 20(1): 77-81.
117. Thon, A. H., S. M., et al. (2012). "Hybrid passivated colloidal quantum dot solids." Nat Nano 7(9): 577-582.
118. Vak, D. J., S. S. Kim, et al. (2007). "Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation." Applied Physics Letters 91(8): -.
119. Vattenfall AB. (2013). "Moabit Fakten." Retrieved 24.06., 2013, from http://kraftwerke.vattenfall.de/powerplant/moabit.
120. VDI (2002). VDI-Wärmeatlas: Berechnungsblätter für den Wärmeübergang. Düsseldorf, Vdi-Verlag.
121. Vogt, B. D., C. L. Soles, et al. (2005). "Moisture absorption into ultrathin hydrophilic polymer films on different substrate surfaces." Polymer 46(5): 1635-1642.
122. Voigt, M. M., R. C. I. Mackenzie, et al. (2012). "Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance." Solar Energy Materials and Solar Cells 105: 77-85.
123. Walker, S. B. and J. A. Lewis (2012). "Reactive silver inks for patterning high-conductivity features at mild temperatures." Journal of the American Chemical Society 134(3): 1419-1421.
124. Walker, W. H., W. K. Lewis, et al. (1923). "Principles of chemical engineering."
125. Wang, J., X. Ren, et al. (2011). "Charge accumulation induced S-shape< i> J-< i> V curves in bilayer heterojunction organic solar cells." Organic Electronics 12(6): 880-885.
126. Wengeler, L., K. Peters, et al. (2013). "Fluid-dynamic properties and wetting behavior of coating inks for roll-to-roll production of polymer-based solar cells." Journal of Coatings Technology and Research: 1-9.
127. Wengeler, L. and W. Schabel (2010). "Verfahrenstechnische Herausforderungen für die Herstellung großflächiger organischer und hybrider Solarzellen." Nanotechnik/ Photonik, AT-Fachverlag, Stuttgart(August 2010, No-4).
128. Wengeler, L., B. Schmidt-Hansberg, et al. (2011). "Investigations on knife and slot die coating and processing of polymer nanoparticle films for hybrid polymer solar cells." Chemical Engineering and Processing: Process Intensification 50(5-6): 478-482.
129. Wengeler, L., M. Schmitt, et al. (2012). "Comparison of large scale coating techniques for organic and hybrid films in polymer based solar cells." Chemical Engineering and Processing: Process Intensification(0).
130. Wenz, T. (2012). Benetzungseigenschaften von Flüssigkeiten und Oberflächen für polymerbasierte Solarzellen. Institut für Thermische Verfahrenstechnik, Universität Karlsruhe - KIT (TH). Studienarbeit.
131. Willenbacher, N. (2013). Rheologie von Beschichtungsfluiden. Hochschulkurs: Beschichtung und Trocknung von dünnen Schichten. Karlsruhe, Germany.
132. Willinger, B. (2013). Theoretische und fluiddynamische Betrachtung von Beschichtungsströmungen. Hochschulkurs Beschichten und Trocknen von dünnen Schichten. Karlsruhe, Germany.
133. Wilson, G. (2013). "Research cell efficiency records." Retrieved 25.05., 2013, from http://www.nrel.gov/ncpv/images/efficiency_chart.jpg.
134. Wolf, R. and A. C. Sparavigna (2010). "Role of Plasma Surface Treatments on Wetting and Adhesion." Engineering 2(6): 397-402.
135. Wu, Y. and G. Zhang (2010). "Performance enhancement of hybrid solar cells through chemical vapor annealing." Nano Letters 10(5): 1628-1631.
136. Xia, Y. J., K. Sun, et al. (2012). "Solution-Processed Metallic Conducting Polymer Films as Transparent Electrode of Optoelectronic Devices." Advanced Materials 24(18): 2436-2440.
137. Yang, H., T. J. Shin, et al. (2005). "Effect of mesoscale crystalline structure on the field-effect mobility of regioregular poly (3-hexyl thiophene) in thin-film transistors." Advanced Functional Materials 15(4): 671-676.
138. Yaws, C. (1999). Chemical properties handbook: physical thermodynamic, environmental, transport, safety and health related properties for organic and inorganic chemicals. New York, McGraw-Hill.
139. Zhou, Y. F., F. S. Riehle, et al. (2010). "Improved efficiency of hybrid solar cells based on nonligand-exchanged CdSe quantum dots and poly(3-hexylthiophene)." Applied Physics Letters 96(1): -.
140. Zimmermann, B., H. F. Schleiermacher, et al. (2011). "ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating." Solar Energy Materials and Solar Cells 95(7): 1587-1589.