Recent advances in vegetable oils based environment friendly coatings: A review

Industrial Crops and Products

Volumn 76, Issue , 2015, Pages 215-229

  Sharmin, Eram ^a,b   Zafar, Fahmina ^a   Akram, Deewan ^a,c   Alam, Manawwer ^d   Ahmad, Sharif ^a  

^a JAMIA MILLIA ISLAMIA CENTRAL UNIVERSITY   (India)

^b UMM AL QURA UNIVERSITY   (Saudi Arabia)

^c JAZAN UNIVERSITY   (Saudi Arabia)

^d KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

Coatings; Environment friendly; High solids; Hyperbranched; UV curable; Vegetable oils; Waterborne

Indexed keywords

COATINGS; COST EFFECTIVENESS; CURING; MONOMERS; OILS AND FATS; VEGETABLE OILS; WATER BORNE COATINGS;

ENVIRONMENT FRIENDLY; HIGH-SOLIDS; HYPERBRANCHED; UV CURABLE; WATERBORNE;

SUSTAINABLE DEVELOPMENT;

BIODEGRADATION; COATING; ECOLOGICAL ECONOMICS; ENVIRONMENTAL PROTECTION; FOSSIL FUEL; POLYMER; RENEWABLE RESOURCE; SUSTAINABLE DEVELOPMENT; TECHNOLOGICAL DEVELOPMENT; VEGETABLE OIL;

GAMOCHAETA;

EID: 84936117140     PISSN: 09266690     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.indcrop.2015.06.022     Document Type: Review

References (126)

1. Ahmad S., Ashraf S.M., Zafar F. Development of linseed oil based polyesteramide without organic solvent at lower temperature. J. Appl. Polym. Sci. 2007, 104:1143-1148.
2. Ahmad S., Mahfuzul Haque M., Ashraf S.M., Ahmad S. Urethane modified boron filled polyesteramide: a novel anti-microbial polymer from a sustainable resource. Eur. Polym. J. 2004, 40:2097-2104.
3. Ahmad S., Pk N., Riaz U. Effect of microwave processing on the spectral, mechanical, thermal, and morphological characteristics of sustainable resource based castor oil epoxy/PVA blends. Adv. Polym. Technol. 2011, 30:96-109.
4. Aigbodion A.I., Okieimen F.E., Ikhuoria E.U., Bakare I.O., Obazee E.O. Rubber seed oil modified with maleic anhydride and fumaric acid and their alkyd resins as binders in water-reducible coatings. J. Appl. Polym. Sci. 2003, 89:3256-3259.
5. Aigbodion A.I., Okieimen F.E., Obazee E.O., Bakare I.O. Utilisation of maleinized rubber seed oil and its alkyd resin as binders in water-borne coatings. Prog. Org. Coat. 2003, 46:28-31.
6. Aigbodion A.I., Pillai C.K.S. Preparation, analysis and applications of rubber seed oil and its derivatives in surface coatings. Prog. Org. Coat. 2000, 38:187-192.
7. Aigbodion A.I., Pillai C.K.S. Synthesis and molecular weight characterization of rubber seed oil-modified alkyd resins. J. Appl. Polym. Sci. 2001, 79:2431-2438.
8. Akbarinezhad E., Ebrahimi M., Kassiriha S.M., Khorasani M. Synthesis and evaluation of water-reducible acrylic-alkyd resins with high hydrolytic stability. Prog. Org. Coat 2009, 65:217-221.
9. Akram D., Ahmad S., Sharmin E., Ahmad S. Silica reinforced organic-inorganic hybrid polyurethane nanocomposites from sustainable resource. Macromol. Chem. Phys. 2010, 211:412-419.
10. Akram D., Sharmin E., Ahmad S. Synthesis, characterization and corrosion protective properties of boron-modified polyurethane from natural polyol. Prog. Org. Coat. 2008, 63:25-32.
11. Akram D., Sharmin E., Ahmad S. Development and characterization of boron incorporated linseed oil polyurethanes. J. Appl. Polym. Sci. 2010, 116:499-508.
12. Alam M., Akram D., Sharmin E., Zafar F., Ahmad S. Vegetable oils based eco-friendly coating materials: a review article. Arabian J. Chem. 2014, 7:469-479.
13. Athawale V., Nimbalkar R. Waterborne coatings based on renewable oil resources: an overview. J. Am. Oil Chem. Soc. 2011, 88:159-185.
14. Badran B.M., Mohammed H.A., Aglan H.A. Effect of different polymers on the efficiency of water-borne methyl amine adduct as corrosion inhibitor for surface coatings. J. Appl. Polym. Sci. 2002, 85:879-885.
15. Balachandran V.S., Jadhav Fau Vemula -P.K., Vemula Pk Fau John -G., John G. Recent advances in cardanol chemistry in a nutshell: from a nut to nanomaterials. Chem. Soc. Rev. 2013, 42:427-438.
16. Bao Y., He J., Li Y. Facile and efficient synthesis of hyperbranched polyesters based on renewable castor oil. Polym. Int. 2013, 62:1457-1464.
17. Bat E., Gündüz G., Kisakürek D., Akhmedov I.M. Synthesis and characterization of hyperbranched and air drying fatty acid based resins. Prog. Org. Coat. 2006, 55:330-336.
18. Bhabhe M.D., Athawale V.D. Chemoenzymatic synthesis of oil-modified acrylic monomers as reactive diluents for high solids coatings. Prog. Org. Coat. 1997, 30:207-211.
19. Black M., Rawlins J.W. Thiol-ene UV-curable coatings using vegetable oil macromonomers. Eur. Polym. J. 2009, 45:1433-1441.
20. Bordes P., Pollet E., Avérous L. Nano-biocomposites: biodegradable polyester/nanoclay systems. Prog. Polym. Sci. 2009, 34:125-155.
21. Chattha M.S., van Oene H. New approach to high solids coatings. Ind. Eng. Chem. Prod. Res. Dev. 1982, 21:437-441.
22. Chattopadhyay D.K., Raju K.V.S.N. Structural engineering of polyurethane coatings for high performance applications. Prog. Polym. Sci. 2007, 32:352-418.
23. Chen Z., Chisholm B., Patani R., Wu J., Fernando S., Jogodzinski K., Webster D. Soy-based UV-curable thiol-ene coatings. J. Coat. Technol. Res. 2010, 7:603-613.
24. Chen Z., Wu J.F., Fernando S., Jagodzinski K. Soy-based, high biorenewable content UV curable coatings. Prog. Org. Coat. 2011, 71:98-109.
25. Crivello J.V., Narayan R. Epoxidized triglycerides as renewable monomers in photoinitiated cationic polymerization. Chem. Mater. 1992, 4:692-699.
26. Czub P. Application of modified natural oils as reactive diluents for epoxy resins. Macromol. Symp. 2006, 242:60-64.
27. Dara R., Jaiswal G., Mirchandani G., Parmar R., Haseebuddin S., Waghoo G., Ghosh S. Synthesis of polymeric dispersants from renewable DCO fatty acid and their multifunctional behavior in waterborne flat paint. J. Coat. Technol. Res. 2009, 6:493-499.
28. Das B., Konwar U., Mandal M., Karak N. Sunflower oil based biodegradable hyperbranched polyurethane as a thin film material. Ind. Crops Prod. 2013, 44:396-404.
29. Das G., Karak N. Epoxidized Mesua ferrea L. seed oil-based reactive diluent for BPA epoxy resin and their green nanocomposites. Prog. Org. Coat. 2009, 66:59-64.
30. De B., Gupta K., Mandal M., Karak N. Biodegradable hyperbranched epoxy from castor oil-based hyperbranched polyester polyol. ACS Sust. Chem. Eng. 2014, 2:445-453.
31. De B., Karak N. Tough hyperbranched epoxy/poly(amido-amine) modified bentonite thermosetting nanocomposites. J. Appl. Polym. Sci. 2014, 131:40327-40335.
32. Decker C., Nguyen Thi Viet T., Pham Thi H. Photoinitiated cationic polymerization of epoxides. Polym. Int. 2001, 50:986-997.
33. Deka H., Karak N. Vegetable oil-based hyperbranched thermosetting polyurethane/clay nanocomposites. Nanoscale Res. Lett. 2009, 4:758-765.
34. Deka H., Karak N. Bio-based hyperbranched polyurethanes for surface coating applications. Prog. Org. Coat. 2009, 66:192-198.
35. Deka H., Karak N. Influence of highly branched poly(amido amine) on the properties of hyperbranched polyurethane/clay nanocomposites. Mater. Chem. Phys. 2010, 124:120-128.
36. Deka H., Karak N. Bio-based hyperbranched polyurethane/clay nanocomposites: adhesive, mechanical, and thermal properties. Polym. Adv. Technol. 2011, 22:973-980.
37. Deka H., Karak N., Kalita R.D., Buragohain A.K. Bio-based thermostable, biodegradable and biocompatible hyperbranched polyurethane/Ag nanocomposites with antimicrobial activity. Polym. Degrad. Stab. 2010, 95:1509-1517.
38. Deka H., Karak N., Kalita R.D., Buragohain A.K. Biocompatible hyperbranched polyurethane/multi-walled carbon nanotube composites as shape memory materials. Carbon 2010, 48:2013-2022.
39. Diez-Pascual A.M., Diez-Vicente A.L. Development of linseed oil-TiO2 green nanocomposites as antimicrobial coatings. J. Mater. Chem. B 2015, 3:4458-4471.
40. Džunuzović E., Tasić S., Božić B., Jeremić K., Dunjić B. Photoreactive hyperbranched urethane acrylates modified with a branched saturated fatty acid. React. Funct. Polym. 2006, 66:1097-1105.
41. Fertier L., Koleilat H., Stemmelen M., Giani O., Joly-Duhamel C., Lapinte V., Robin J.-J. The use of renewable feedstock in UV-curable materials-a new age for polymers and green chemistry. Prog. Polym. Sci. 2013, 38:932-962.
42. Ghosal A., Shah J., Kotnala R.K., Ahmad S. Facile green synthesis of nickel nanostructures using natural polyol and morphology dependent dye adsorption properties. J. Mater. Chem. A 2013, 1:12868-12878.
43. Gianni A., Bongiovanni R., Turri S., Deflorian F., Malucelli G., Rizza G. UV-cured coatings based on waterborne resins and SiO2 nanoparticles. J. Coat. Technol. Res. 2009, 6:177-185.
44. Gunstone F.D. Chemical reactions of fatty acids with special reference to the carboxyl group. Eur. J. Lipid Sci. Technol. 2001, 103:307-314.
45. Guo Y., Mannari V., Patel P., Massingill J. Self-emulsifiable soybean oil phosphate ester polyols for low-VOC corrosion resistant coatings. JCT Res. 2006, 3:327-331.
46. Gurunathan T., Mohanty S., Nayak S.K. Effect of reactive organoclay on physicochemical properties of vegetable oil-based waterborne polyurethane nanocomposites. RSC Adv. 2015, 5:11524-11533.
47. Gündüz G., Idlibi Y., Akovali G. Oil modified and waterborne polyurethane resin. J. Coat. Technol. 2002, 74:59-62.
48. Gündüz G., Khalid A.H., Mecidoğlu I.A., Aras L. Water-borne and air-drying oil-based resins. Prog. Org. Coat. 2004, 49:259-269.
49. Han Y.-H., Taylor A., Mantle M., Knowles K. UV curing of organic-inorganic hybrid coating materials. J. Sol-Gel Sci. Technol. 2007, 43:111-123.
50. Haseebuddin S., Parmar R., Waghoo G., Ghosh S.K. Study of hexafunctional polyol in high solids air-drying alkyd: improved film performance. Prog. Org. Coat. 2009, 64:446-453.
51. Hien L., Minh D., Trieu N., Decker C. Influence of some vegetable oils on the photocrosslinking of coatings based on an o-cresol novolac epoxy resin and a bis-cycloaliphatic diepoxide. J. Coat. Technol. Res. 2011, 8:343-353.
52. Hu Y.S., Tao Fau Y., Hu C.P., Hu C.P. Polyurethaneurea/vinyl polymer hybrid aqueous dispersions based on renewable material. Biomacromol 2015, 2:80-84.
53. Jowkar-Deriss M., Karlsson O.J. Morphologies and droplet sizes of alkyd-acrylic hybrids with high solids content. Colloids Surf. A Physicochem. Eng. Asp. 2004, 245:115-125.
54. Kalita H., Karak N. Biobased hyperbranched shape-memory polyurethanes: effect of different vegetable oils. J. Appl. Polym. Sci. 2014, 131:39579-39586.
55. Karak N., Konwarh R., Voit B. Catalytically active vegetable-oil-based thermoplastic hyperbranched polyurethane/silver nanocomposites. Macromol. Mater. Eng. 2010, 295:159-169.
56. Karak N., Rana S., Cho J.W. Synthesis and characterization of castor-oil-modified hyperbranched polyurethanes. J. Appl. Polym. Sci. 2009, 112:736-743.
57. Karakaya C., Gündüz G., Aras L., Mecidoğlu I.A. Synthesis of oil based hyperbranched resins and their modification with melamine-formaldehyde resin. Prog. Org. Coat. 2007, 59:265-273.
58. Klaasen R.P., van der Leeuw R.P.C. Fast drying cobalt-free high solids alkyd paints. Prog. Org. Coat. 2006, 55:149-153.
59. Kolot V., Grinberg S. Vernonia oil-based acrylate and methacrylate polymers and interpenetrating polymer networks with epoxy resins. J. Appl. Polym. Sci. 2004, 91:3835-3843.
60. Kong X., Liu G., Qi H., Curtis J.M. Preparation and characterization of high-solid polyurethane coating systems based on vegetable oil derived polyols. Prog. Org. Coat. 2013, 76:1151-1160.
61. Konwar U., Karak N. Mesua ferrea L. Seed oil-based highly branched polyester resins. Polym. Plast. Technol. Eng. 2009, 48:970-975.
62. Konwar U., Karak N., Mandal M. Vegetable oil based highly branched polyester/clay silver nanocomposites as antimicrobial surface coating materials. Prog. Org. Coat. 2010, 68:265-273.
63. Lindeboom J. Air-drying high solids alkyd pants for decorative coatings. Prog. Org. Coat. 1997, 34:147-151.
64. Lligadas G., Ronda J.C., Galiaỳ M., Caidiz V. Plant oils as platform chemicals for polyurethane synthesis: current state-of-the-art. Biomacromol 2010, 11:2825-2835.
65. Lligadas G., Ronda J.C., Galià M., Cádiz V. Renewable polymeric materials from vegetable oils: a perspective. Mater. Today 2013, 16:337-343.
66. Lochab B., Shukla S., Varma I.K. Naturally occurring phenolic sources: monomers and polymers. RSC Adv. 2014, 4:21712-21752.
67. Lu Y., Larock R.C. New hybrid latexes from a soybean oil-based waterborne polyurethane and acrylics via emulsion polymerization. Biomacromol 2007, 8:3108-3114.
68. Lu Y., Larock R.C. Soybean-oil-based waterborne polyurethane dispersions: effects of polyol functionality and hard segment content on properties. Biomacromol 2008, 9:3332-3340.
69. Lu Y., Larock R.C. Soybean oil-based, aqueous cationic polyurethane dispersions: synthesis and properties. Prog. Org. Coat. 2010, 69:31-37.
70. Lu Y., Tighzert L., Berzin F., Rondot S. Innovative plasticized starch films modified with waterborne polyurethane from renewable resources. Carbon Polym. 2005, 61:174-182.
71. Ma S., Jiang Y., Liu X., Fan L., Zhu J. Bio-based tetrafunctional crosslink agent from gallic acid and its enhanced soybean oil-based UV-cured coatings with high performance. RSC Adv. 2014, 4:23036-23042.
72. Mahapatra S.S., Karak N. Hyperbranched polyamine: a promising curing agent for a vegetable oil-based poly(ester-amide) resin. Prog. Org. Coat. 2007, 60:328-334.
73. Maisonneuve L., Lebarbe T., Grau E., Cramail H. Structure-properties relationship of fatty acid-based thermoplastics as synthetic polymer mimics. Polym. Chem. 2013, 4:5472-5517.
74. Mańczyk K., Szewczyk P. Highly branched high solids alkyd resins. Prog. Org. Coat. 2002, 44:99-109.
75. Miao S., Wang P., Su Z., Zhang S. Vegetable-oil-based polymers as future polymeric biomaterials. Acta Biomater. 2014, 10:1692-1704.
76. Miller S.A. Sustainable polymers: replacing polymers derived from fossil fuels. Poly. Chem. 2014, 5:3117-3118.
77. Mohamed H.A., Badran B.M., Aglan H.A. Waterborne methylamine adduct as corrosion inhibitor for surface coatings. J. Appl. Polym. Sci. 2001, 80:286-296.
78. Montero de Espinosa L., Meier M.A.R. Plant oils: the perfect renewable resource for polymer science?!. Eur. Polym. J. 2011, 47:837-852.
79. Mosiewicki M.A., Aranguren M.I. A short review on novel biocomposites based on plant oil precursors. Eur. Polym. J. 2013, 49:1243-1256.
80. Murillo E.A., Vallejo P.P., López B.L. Synthesis and characterization of hyperbranched alkyd resins based on tall oil fatty acids. Prog. Org. Coat. 2010, 69:235-240.
81. Murillo E.A., Vallejo P.P., López B.L. Effect of tall oil fatty acids content on the properties of novel hyperbranched alkyd resins. J. Appl. Polym. Sci. 2011, 120:3151-3158.
82. Muturi P., Wang D., Dirlikov S. Epoxidized vegetable oils as reactive diluents I. Comparison of vernonia, epoxidized soybean and epoxidized linseed oils. Prog. Org. Coat. 1994, 25:85-94.
83. Nebioglu A., Soucek M. Investigation of the properties of UV-curing acrylate-terminated unsaturated polyester coatings by utilizing an experimental design methodology. J. Coat. Technol. Res. 2007, 4:425-433.
84. Ni B., Yang L., Wang C., Wang L., Finlow D. Synthesis and thermal properties of soybean oil-based waterborne polyurethane coatings. J. Therm. Anal. Calorimet. 2010, 100:239-246.
85. Nimbalkar R., Athawale V. Synthesis and characterization of canola oil alkyd resins based on novel acrylic monomer (ATBS). J. Am. Oil Chem. Soc. 2010, 87:947-954.
86. Patel K.I., Parmar R.J., Parmar J.S. Novel binder system for ultraviolet-curable coatings based on tobacco seed (Nicotiana rustica) oil derivatives as a renewable resource. J. Appl. Polym. Sci. 2008, 107:71-81.
87. Pathan S., Ahmad S. s-Triazine ring-modified waterborne alkyd: synthesis, characterization, antibacterial, and electrochemical corrosion studies. ACS Sust. Chem. Eng. 2013, 1:1246-1257.
88. Pathan S., Ahmad S. Synthesis, characterization and the effect of the s-triazine ring on physico-mechanical and electrochemical corrosion resistance performance of waterborne castor oil alkyd. J. Mater. Chem. A 2013, 1:14227-14238.
89. Pramanik S., Barua N., Buragohain A.K., Hazarika J., Kumar A., Karak N. Biofunctionalized multiwalled carbon nanotube: a reactive component for the in situ polymerization of hyperbranched poly(ester amide) and its biophysico interfacial properties. J. Phys. Chem. C 2013, 117:25097-25107.
90. Pramanik S., Bharali P., Konwar B.K., Karak N. Antimicrobial hyperbranched poly(ester amide)/polyaniline nanofiber modified montmorillonite nanocomposites. Mater. Sci. Eng.: C 2014, 35:61-69.
91. Pramanik S., Hazarika J., Kumar A., Karak N. Castor oil based hyperbranched poly(ester amide)/polyaniline nanofiber nanocomposites as antistatic materials. Ind. Eng. Chem. Res. 2013, 52:5700-5707.
92. Pramanik S., Konwarh R., Sagar K., Konwar B.K., Karak N. Bio-degradable vegetable oil based hyperbranched poly(ester amide) as an advanced surface coating material. Prog. Org. Coat. 2013, 76:689-697.
93. Quintero C., Mendon S.K., Smith O.W., Thames S.F. Miniemulsion polymerization of vegetable oil macromonomers. Prog. Org. Coat. 2006, 57:195-201.
94. Rana S., Cho J.W., Park J.-S. Thermomechanical and water-responsive shape memory properties of carbon nanotubes-reinforced hyperbranched polyurethane composites. J. Appl. Polym. Sci. 2013, 127:2670-2677.
95. Ren Z., Liu L., Wang H., Fu Y., Jiang L., Ren B. Novel amphoteric polyurethane dispersions with postpolymerization crosslinking function derived from hydroxylated tung oil: synthesis and properties. RSC Adv. 2015, 5:27717-27721.
96. Rengasamy S., Mannari V. UV-curable PUDs based on sustainable acrylated polyol: study of their hydrophobic and oleophobic properties. Prog. Org. Coat. 2014, 77:557-567.
97. Samuelsson J., Sundell P.-E., Johansson M. Synthesis and polymerization of a radiation curable hyperbranched resin based on epoxy functional fatty acids. Prog. Org. Coat. 2004, 50:193-198.
98. Saravari O., Phapant P., Pimpan V. Synthesis of water-reducible acrylic-alkyd resins based on modified palm oil. J. Appl. Polym. Sci. 2005, 96:1170-1175.
99. Shah M.Y., Ahmad S. Waterborne vegetable oil epoxy coatings: preparation and characterization. Prog. Org. Coat. 2012, 75:248-252.
100. Sharmin E., Akram D., Ghosal A., Rahman, u O., Zafar F., Ahmad S. Preparation and characterization of nanostructured biohybrid. Prog. Org. Coat 2011, 72:469-472.
101. Sharmin E., Alam M.S., Philip R.K., Ahmad S. Linseed amide diol/DGEBA epoxy blends for coating applications: preparation, characterization, ageing studies and coating properties. Prog. Org. Coat. 2010, 67:170-179.
102. Sharmin E., Ashraf S.M., Ahmad S. Synthesis, characterization, antibacterial and corrosion protective properties of epoxies, epoxy-polyols and epoxy-polyurethane coatings from linseed and Pongamia glabra seed oils. Int. J. Biol. Macromol. 2007, 40:407-422.
103. Sharmin E., Rahman, u O., Zafar F., Akram D., Alam M., Ahmad S. Linseed oil polyol/ZnO bionanocomposite towards mechanically robust, thermally stable, hydrophobic coatings: a novel synergistic approach utilising a sustainable resource. RSC Adv. 2015, 5:47928-47944.
104. Sharmin E., Zafar F., Akram D., Ahmad S. Plant oil polyol nanocomposite for antibacterial polyurethane coating. Prog. Org. Coat. 2013, 76:541-547.
105. Shikha D., Kamani P.K., Shukla M.C. Studies on synthesis of water-borne epoxy ester based on RBO fatty acids. Prog. Org. Coat. 2003, 47:87-94.
106. Smitha V.S., Jaimy K.B., Shajesh P., Jeena J.K., Warrier K.G. UV curable hydrophobic inorganic-organic hybrid coating on solar cell covers for photocatalytic self cleaning application. J. Mater. Chem. A 2013, 1:12641-12649.
107. Soucek M.D., Johnson A.H., Wegner J.M. Ternary evaluation of UV-curable seed oil inorganic/organic hybrid coatings using experimental design. Prog. Org. Coat. 2004, 51:300-311.
108. Thakur S., Karak N. Multi-stimuli responsive smart elastomeric hyperbranched polyurethane/reduced graphene oxide nanocomposites. J. Mater. Chem. A 2014, 2:14867-14875.
109. Thakur S., Karak N. Ultratough, ductile, castor oil-based, hyperbranched, polyurethane nanocomposite using functionalized reduced graphene oxide. ACS Sust. Chem. Eng. 2014, 2:1195-1202.
110. Thames S.F., Yu H. Cationic UV-cured coatings of epoxide-containing vegetable oils. Surf. Coat. Technol. 1999, 115:208-214.
111. Thames S.F., Yu H., Schuman T.P., Wang M.D. Acrylated lesquerella oil in ultraviolet cured coatings. Prog. Org. Coat. 1996, 28:299-305.
112. van Benthem R.A.T.M. Novel hyperbranched resins for coating applications. Prog. Org. Coat. 2000, 40:203-214.
113. Wan Rosli W.D., Kumar R.N., Mek Zah S., Hilmi M.M. UV radiation curing of epoxidized palm oil-cycloaliphatic diepoxide system induced by cationic photoinitiators for surface coatings. Eur. Polym. J. 2003, 39:593-600.
114. Wang C., Jones F.N. Stability and film properties of tung oil modified soybean alkyd emulsion. J. Appl. Polym. Sci. 2000, 78:1698-1706.
115. Wouters M.E.L., Wolfs D.P., van der Linde M.C., Hovens J.H.P., Tinnemans A.H.A. Transparent UV curable antistatic hybrid coatings on polycarbonate prepared by the sol-gel method. Prog. Org. Coat 2004, 51:312-319.
116. Wu J.-Z., Bouwman E., Reedijk J. Chelating ligands as powerful additives to manganese driers for solvent-borne and water-borne alkyd paints. Prog. Org. Coat. 2004, 49:103-108.
117. Wu J.F., Fernando S., Jagodzinski K., Weerasinghe D., Chen Z. Effect of hyperbranched acrylates on UV-curable soy-based biorenewable coatings. Polym. Int. 2011, 60:571-577.
118. Wu S., Sears M.T., Soucek M.D., Simonsick W.J. Synthesis of reactive diluents for cationic cycloaliphatic epoxide UV coatings. Polymer 1999, 40:5675-5686.
119. Xia Y., Larock R.C. Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem. 2010, 12:1893-1909.
120. Zabel K.H., Klaasen R.P., Muizebelt W.J., Gracey B.P., Hallett C., Brooks C.D. Design and incorporation of reactive diluents for air-drying high solids alkyd paints. Prog. Org. Coat. 1999, 35:255-264.
121. Zafar F., Ashraf S.M., Ahmad S. Studies on zinc-containing linseed oil based polyesteramide. React. Funct. Polym. 2007, 67:928-935.
122. Zafar F., Sharmin E., Zafar H., Shah M.Y., Nishat N., Ahmad S. Facile microwave-assisted preparation of waterborne polyesteramide/OMMT clay bio-nanocomposites for protective coatings. Ind. Crops Prod. 2015, 67:484-491.
123. Zafar F., Zafar H., Sharmin E., Ashraf S.M., Ahmad S. Studies on ambient cured biobased Mn(II), Co(II) and Cu(II) containing metallopolyesteramides. J. Inorg. Organomet. Polym. Mater. 2011, 21:646-654.
124. Zou K., Soucek M.D. UV-curable organic-inorganic hybrid film coatings based on epoxidized cyclohexene derivatized linseed oil. Macromol. Chem. Phys. 2004, 205:2032-2039.
125. Zou K., Soucek M.D. UV-curable cycloaliphatic epoxide based on modified linseed oil: synthesis, characterization and kinetics. Macromol. Chem. Phys. 2005, 206:967-975.
126. Zovi O., Lecamp L., Loutelier-Bourhis C., Lange C.M., Bunel C. A solventless synthesis process of new UV-curable materials based on linseed oil. Green Chem. 2011, 13:1014-1022.