Vegetable oil based eco-friendly coating materials: A review article

Arabian Journal of Chemistry

Volumn 7, Issue 4, 2014, Pages 469-479

  Alam, Manawwer ^a   Akram, Deewan ^b,c   Sharmin, Eram ^c,d   Zafar, Fahmina ^c   Ahmad, Sharif ^c  

^a KING SAUD UNIVERSITY   (Saudi Arabia)

^b JAZAN UNIVERSITY   (Saudi Arabia)

^c JAMIA MILLIA ISLAMIA CENTRAL UNIVERSITY   (India)

^d UMM AL QURA UNIVERSITY   (Saudi Arabia)

Author keywords

Coatings; Eco friendly; Renewable resources

Indexed keywords

COATINGS; ENVIRONMENTAL PROTECTION; FUNCTIONAL GROUPS; PLATING; PROTECTIVE COATINGS; TOXIC MATERIALS;

CHEMICAL TRANSFORMATIONS; COATING MATERIAL; DERIVED MATERIALS; ECO-FRIENDLY; FUTURE PERSPECTIVES; LITERATURE SURVEY; LOW MOLECULAR WEIGHT; RENEWABLE RESOURCE;

VEGETABLE OILS;

EID: 84905435382     PISSN: 18785352     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arabjc.2013.12.023     Document Type: Review

References (140)

1. Abd El-Wahab H., Abd EL-Fattah M., Ghazy M.B.M. Synthesis and characterization of new modified anti-corrosive polyesteramide resins incorporated pyromellitimide ring for surface coating. Prog. Org. Coat. 2011, 72:353-359.
2. Ahmad S., Ashraf S.M., Hasnat A., Noor A. Studies on epoxidized oil and its blend with poly- styrene and polymethylmethacrylate. Ind. J. Chem. Technol. 2001, 8:176-180.
3. Ahmad S., Sharmin E., Zafar F., Ashraf S.M., Hasnal A. Studies on ambient cured polyurethane modified epoxy coatings synthesized from a sustainable resource. Prog. Cryst. Growth Charact. 2002, 45:83-88.
4. Ahmad S., Ashraf S.M., Naqvi F., Yadav S., Hasnat A. A polyesteramide from Pongamia glabra oil for biologically safe anticorrosive coating. Prog. Org. Coat. 2003, 47:95-102.
5. Ahmad S., Haque M.M., Ashraf S.M., Ahmad S. Urethane modified boron filled polyesteramide: a novel anti-microbial polymer from a sustainable resource. Eur. Polym. J. 2004, 40:2097-2104.
6. Ahmad S., Ashraf S.M., Hasnat A., Sharmin E., Kamal A. Studies on urethane- modified alumina-filled polyesteramide anticorrosive coatings cured at ambient temperature. J. Polym. Mater. 2005, 22:377-384.
7. Ahmad S., Ashraf S.M., Sharmin E., Nazir M., Alam M. Studies on new polyetheramide-butylated melamine formaldehyde based anticorrosive coatings from a sustainable resource. Prog. Org. Coat. 2005, 52:85-91.
8. Ahmad S., Ashraf S.M., Alam M. Studies on melamine modified polyesteramide as anticorrosive coatings from linseed oil: a sustainable resource. J. Macromol. Sci. Part A Pure Appl. Chem. 2006, 43:773-783.
9. Ahmad S., Ashraf S.M., Hasnat A., Kumar G.S., Sharmin E. Studies on epoxy-butylated melamine formaldehyde-based anticorrosive coatings from a sustainable resource. Prog. Org. Coat. 2006, 56:207-213.
10. Ahmad S., Ashraf S.M., Naqvi F., Yadav S., Zafar F. Development and characterization of vinylated polyesteramide from non-edible seeds oils. Prog. Org. Coat. 2006, 56:1-7.
11. Ahmad S., Naqvi F., Sharmin E., Verma K.L. Development of amine-acid cured Annona squamosa oil epoxy anticorrosive polymeric coatings. Prog. Org. Coat. 2006, 55:268-275.
12. Ahmad S., Ashraf S.M., Zafar F. Development of linseed oil based polyesteramide without organic solvent at lower temperature. J. Appl. Polym. Sci. 2007, 104:1143-1148.
13. Aigbodion A.I., Okiemen F.E., Iukhuoria E.U., Bakare I.O., Obazee E.O. Rubber seed oil modified with maleic anhydride and fumaric acid and their alkyd resins as binders in water-reducible coatings. J. Appl. Polym. Sci. 2003, 89:3256-3259.
14. Akintayo C.O., Adebowale K.O. Synthesis and characterization of acrylated Albizia benth medium oil alkyds. Prog. Org. Coat. 2004, 50:207-212.
15. Akintayo C.O., Akintayo E.T. Synthesis and characterization of acrylated polyetheramide based coatings from Albizia benth seed oil. World Appl. Sci. J. 2010, 11:1408-1415.
16. Akintayo C.O., Akintayo E.T., Thomas Z. Studies on newly developed urethane modified polyetheramide coatings from Albizia benth oil. J. Sci. Ind. Res. 2011, 2:78-88.
17. Akram D., Sharmin E., Ahmad S. Synthesis, characterization and corrosion protective properties of boron-modified polyurethane from natural polyol. Prog. Org. Coat. 2008, 63:25-32.
18. Akram D., Sharmin E., Ahmad S. Synthesis and characterization of boron incorporated polyester polyol from linseed oil: a sustainable material. Macromol. Symp. 2009, 277:130-137.
19. Akram D., Sharmin E., Ahmad S. Development and characterization of boron incorporated linseed oil polyurethanes. J. Appl. Polym. Sci. 2010, 116:499-508.
20. Alam M., Alandis N.M. Microwave assisted synthesis of urethane modified polyesteramide coatings from jatropha seed oil. J. Polym. Environ. 2011, 19:784-792.
21. Alam M., Alandis N.M. Development of ambient cured polyesteramide coatings from linseed oil: a sustainable resource. J. Polym. Environ. 2011, 19:391-397.
22. Alam M., Alandis N.M. Synthesis and characterization of poly(styrene-co- maleic anhydride) modified pyridine polyesteramide coatings from sustainable resource. Pigment Resin Technol. 2012, 41:20-24.
23. Alam M., Alandis N.M. Microwave-assisted preparation of urethane-modified polyetheramide coatings from jatropha seed oil. High Perf. Polym. 2012, 24:538-545.
24. Alam M., Alandis N.M. Microwave assisted synthesis and characterization of olive oil based polyetheramide as anticorrosive polymeric coatings. Prog. Org. Coat. 2012, 75:527-536.
25. Alam M., Sharmin E., Ashraf S.M., Ahmad S. Newly developed urethane modified polyetheramide-based anticorrosive coatings from a sustainable resource. Prog. Org. Coat. 2004, 50:224-230.
26. Alam M., Ashraf S.M., Ahmad S. Pyridine-poly(urethane ester amide) coatings from linseed oil. J. Polym. Res. 2008, 15:343-350.
27. Alam M., Ray A.R., Ashraf S.M., Ahmad S. Synthesis, characterization and performance of amine modified linseed oil fatty amide coatings. J. Am. Oil Chem. Soc. 2009, 86:573-580.
28. Alam J., Riaz U., Ahmad S. High performance corrosion resistant polyaniline/alkyd ecofriendly coatings. Curr. Appl. Phys. 2009, 9:80-86.
29. Alam M., Ashraf S.M., Ray A.R., Ahmad S. Development of anticorrosive poly (ether-urethane) amide coatings from linseed oil: a sustainable resource. J. Polym. Environ. 2010, 18:208-215.
30. Alam, M., Zafar, F., Sharmin, E., 2013. In: Inamuddin, (Ed.), Polyetheramide-Birth of a New Coating Material (Chapter 4) in Advanced Functional Polymers and Composites: Materials, Devices and Allied Applications, vol. 1. Nova Publishers, pp. 123-136, ISBN: 978-1-62948-055-8.
31. Aqeel S., Abd El-Wahab H., Mahdy A., Abd El-Hai F., Abd El-Fattah M. New modified polyesteramide resin for industrial applications. Prog. Org. Coat. 2010, 68:219-224.
32. Araujo W.S., Margarit I.C.P., Mattos O.R., Fragata F.L., de Lima-Neto P. Corrosion aspects of alkyd paints modified with linseed and soy oils. Electrochim. Acta 2010, 55:6204-6211.
33. Argyropoulos J., Popa P., Spilman G., Bhattacharjee D., Koonce W. Seed oil based polyester polyols for coatings. J. Coat. Technol. Res. 2009, 6:501-508.
34. Ashraf S.M., Ahmad S., Riaz U., Dua R. Conducting semi-interpenetrating polymer network of polypyrrole with poly(esteramide urethane) synthesized from a sustainable resource. J. Macromol. Sci. Part A 2005, 42:521-533.
35. Athawale V.D., Nimbalkar R.V. Emulsifyable air drying urethane alkyds. Prog. Org. Coat. 2010, 67:66-71.
36. Baumann H., Buhler M., Fochem H., Hirsinger F., Zoebelein H., Falbe J. Natural fats and oils - renewable raw materials for the chemical industry. Angew. Chem. Int. Ed. Engl. 1988, 27:41-62.
37. Bharathi N.P., Alam M., Jan A.T., Hashmi A.A. Bioactive organotin materials: synthesis, characterization and antimicrobial investigation. J. Inorg. Organomet. Polym. Mater. 2009, 19:187-195.
38. Bharathi N.P., Khan N.U., Shreaz S., Hashmi A.A. Seed oil based zinc bioactive polymers: synthesis, characterization and biological studies. J. Inorg. Organomet. Polym. Mater. 2009, 19:558-565.
39. Bharathi N.P., Khan N.U., Alam M., Shreaz S., Hashmi A.A. Cadmium incorporated oil based bioactive polymers: synthesis, characterization and physico-chemical studies. J. Inorg. Organomet. Polym. Mater. 2010, 20:833-838.
40. Bharathi N.P., Khan N.U., Alam M., Shreaz S., Hashmi A.A. Edible oil- based metal-containing bioactive polymers: synthesis, characterization, physicochemical and biological studies. J. Inorg. Organomet. Polym. Mater. 2010, 20:839-846.
41. Boquillon N., Fringant C. Polymer networks derived from curing of epoxidised linseed oil: influence of different catalysts and anhydride hardeners. Polymer 2000, 41:8603-8613.
42. Brasil M.C., Gerbase A.E., De Luca M.A., Gregario J.R. Organic-inorganic hybrid films based on hydroxylated soybean oils. J. Am. Oil Chem. Soc. 2007, 84:289-295.
43. Chaudhari A.B., Tatiya P.D., Hedaoo R.K., Kulkarni R.D., Gite V.V. Polyurethane prepared from neem oil polyesteramides for self-healing anticorrosive coatings. Ind. Eng. Chem. Res. 2013, 52:10189-10197.
44. Chaudhari, A. B., Anand, A., Rajput, S.D., Kulkarni, R.D., Gite, V.V., 2013. Synthesis, characterization and application of Azadirachta indica juss (neem oil) fatty amides (AIJFA) based polyurethanes coatings: a renewable novel approach.
45. Chen J., Soucek M.D., Simonsick W.J., Celikay R.C. Synthesis and photopolymerization of norbornyl epoxidized linseed oil. Polymer 2002, 43:5379-5389.
46. Dai H., Yang L., Lin B., Wang C., Shi G. Synthesis and characterization of the different soy-based polyols by ring opening of epoxidized soybean oil with methanol, 1,2-ethanediol and 1,2-propanediol. J. Am. Oil Chem. Soc. 2009, 86:261-267.
47. Dar M.A. A review: plant extracts and oils as corrosion inhibitors in aggressive media. Ind. Lubr. Tribol. 2011, 63:227-233.
48. Das G., Karak N. Epoxidized Mesua ferrea L. seed oil-based reactive diluent for BPA epoxy resin and their green nanocomposites. Prog. Org. Coat. 2009, 66:59-64.
49. Das G., Karak N. Mesua ferrea L. seed oil-based epoxy resins. J. Appl. Polym. Sci. 2010, 118:128-134.
50. Das B., Konwar U., Mandal M., Karak N. Sunflower oil based biodegradable hyperbranched polyurethane as a thin film material. Ind. Crop. Prod. 2013, 44:396-404.
51. De Luca M.A., Martinelli M., Jacobi M.M., Becker P.L., Ferrão M.F. Ceramer coatings from castor oil or epoxidized castor oil and tetraethoxysilane. J. Am. Oil Chem. Soc. 2006, 83:147-151.
52. Deka H., Karak N. Bio-based hyperbranched polyurethanes for surface coating applications. Prog. Org. Coat. 2009, 66:192-198.
53. Deka H., Karak N., Kalita R.D., Buragohain A.K. Bio-based thermostable, biodegradable and biocompatible hyperbranched polyurethane/Ag nanocomposites with antimicrobial activity. Polym. Degrad. Stab. 2010, 95:1509-1517.
54. 3 particles on the corrosion behavior of alkyd based waterborne coatings. Corr. Sci. 2009, 51:6-20.
55. Dhoke S.K., Khanna A.S., Sinha T.K.M. Effect of nano-ZnO particles on the corrosion behavior of alkyd based waterborne coatings. Prog. Org. Coat. 2009, 64:371-382.
56. Dhoke S.K., Bhandari R., Khanna A.S. Effect of nano-ZnO addition on the silicone-modified alkyd-based waterborne coatings on its mechanical and heat-resistance properties. Prog. Org. Coat. 2009, 64:39-46.
57. Dutta N., Karak N., Dolui S.K. Alkyd-epoxy blends as multipurpose coatings. J. Appl. Polym. Sci. 2006, 100:516-521.
58. Dutta S., Karak N., Jena T. Evaluation of Mesua ferrea L. seed oil modified polyurethane paints. Prog. Org. Coat. 2009, 65:131-135.
59. Dutton H.J., Scholfield C.R. Recent developments in the glyceride structure of vegetable oils. Prog. Chem. Fats Lipids 1963, 6:313-339.
60. Earls J.D., White J.E., Dettloff M.L., Null M.J. Development and evaluation of terminally epoxidized triglycerides for coatings applications. J. Coat. Technol. Res. 2004, 1:243-245.
61. Ferrer M.C.C., Babb D., Ryan A.J. Characterisation of polyurethane networks based on vegetable derived polyol. Polymer 2008, 49:3279-3287.
62. Fornof A.R., Onah E., Ghosh S., Frazier C.E., Sohn S., Wilkes G.L., Long T.E. Synthesis and characterization of triglyceride-based polyols and tack-free coatings via the air oxidation of soy oil. J. Appl. Polym. Sci. 2006, 102:690-697.
63. Gao C., Xu X., Ni J., Lin W., Zheng Q. Effects of castor oil, glycol semi-ester, and polymer concentration on the properties of waterborne polyurethane dispersions. Polym. Eng. Sci. 2009, 49:162-167.
64. Ghosal A., Shah J., Kotnala R.K., Ahmad S. Facile green synthesis of Nickel nanostructures using natural polyol and morphology dependent dye adsorption properties. J. Mater. Chem. A 2013, 1:12868-12878.
65. Haseebuddin S., Parmar R., Waghoo G., Ghosh S.K. Study of hexafunctional polyol in high solids air-drying alkyd: improved film performance. Prog. Org. Coat. 2009, 64:446-453.
66. Hazmi A.S.A., Aung M.M., Abdullah L.C., Salleh M.Z., Mahmood M.H. Producing jatropha oil-based polyol via epoxidation and ring opening. Ind. Crop. Prod. 2013, 50:563-567.
67. Heiskanen N., Jämsä S., Paajanen L., Koskimies S. Synthesis and performance of alkyd acrylic hybrid binders. Prog. Org. Coat. 2010, 67:329-338.
68. Hofland A. Alkyd resins: from down and out to alive and kicking. Prog. Org. Coat. 2012, 73:274-282.
69. Hojabri, Kong X., Narine S.S. Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization. Biomacromolecules 2009, 10:884-891.
70. Ikhouria E.U., Oikiemen F.E., Aigbodion A.I., Obaze E.O., Bakare I.O. Synthesis a and characterization of chlorinated rubber seed oil alkyd resins. Prog. Org. Coat. 2007, 59:134-137.
71. Jalilian M., Yeganeh H., Nekoomanesh Haghighi M. Preparation and characterization of polyurethane electrical insulating coatings derived from novel soybean oil-based polyol. Polym. Adv. Technol. 2010, 21:118-127.
72. Javni I., Petrovic Z.S., Guo A., Fuller R. Thermal stability of polyurethanes based on vegetable oils. J. Appl. Polym. Sci. 2000, 77:1723-1734.
73. Karak N., Rana S., Cho J.W. Synthesis and characterization of castor oil modified hyperbranched polyurethanes. J. Appl. Polym. Sci. 2009, 112:736-743.
74. Kashif M., Zafar F., Ahmad S. Pongamia glabra seed oil based poly (urethane-fatty amide). J. Appl. Polym. Sci. 2010, 117:1245-1251.
75. Khan N.U., Bharathi N.P., Shreaz S., Hashmi A.A. Development of water-borne green polymer used as a potential nano drug vehicle and it's in vitro release studies. J. Polym. Environ. 2011, 19:607-614.
76. Kim H.M., Kim H.R., Hou C.T., Kim B.S. Biodegradable photo-crosslinked thin polymer networks based on vegetable oil hydroxy fatty acids. J. Am. Oil Chem. Soc. 2010, 87:1451-1459.
77. Köckritz A., Martin A. Oxidation of unsaturated fatty acid derivatives and vegetable oils. Eur. J. Lipid Sci. Technol. 2008, 110:812-824.
78. Kong X., Liu G., Qi H., Curtis J.M. Preparation and characterization of high- solid polyurethane coating systems based on vegetable oil derived polyols. Prog. Org. Coat. 2013, 76:1151-1160.
79. Koprululu A., Onen A., Serhatli I.E., Guner F.S. Synthesis of triglyceride based urethane macromers and their use in copolymerization. Prog. Org. Coat. 2008, 63:365-371.
80. Lahhit N., Bouyanzer A., Desjobert J.M., Hammouti B., Salghi R., Costa J., Jama C., Bentiss F., Majidi L. Fennel (Foeniculum Vulgar) essential oil as green corrosion inhibitor of carbon steel in hydrochloric acid solution. Portugal. Electrochim. Acta 2011, 29:127-138.
81. Lu Y., Larock R.C. Soybean-oil-based waterborne polyurethane dispersions: effects of polyol functionality and hard segment content on properties. Biomacromolecules 2008, 9:3332-3340.
82. Lu Y., Larock R.C. Novel polymeric materials from vegetable oils and vinyl monomers: preparation, properties, and applications. ChemSusChem 2009, 2:136-147.
83. Mahapatra S.S., Karak N. Synthesis and characterization of poly (ester amide) resins from Nahar seed oil for surface coating applications. Prog. Org. Coat. 2004, 51:103-108.
84. Meir M.A.R., Metzger J.O., Scubert U.S. Plant oil renewable resources as green alternatives in polymer science. Chem. Soc. Rev. 2007, 36:1788-1802.
85. Meshram P.D., Puri R.G., Patil A.L., Gite V.V. Synthesis and characterization of modified cottonseed oil based polyesteramide for coating applications. Prog. Org. Coat. 2013, 76:1144-1150.
86. Mistry S., Agarwal D. Studies on the film characteristics of polyesteramide resins based on hydroxy ethyl fatty acid amide. Pigment Resin Technol. 2009, 38:366-371.
87. Moeini H.R. Preparation and properties of novel green poly (ether-ester urethane)s insulating coatings based on polyols derived from glycolyzed pet, castor oil, and adipic acid and blocked isocyanate. J. Appl. Polym. Sci. 2007, 106:1853-1859.
88. Muizebelt W.J., Hubert J.C., Nielen M.W.F., Klaasen R.P., Zabel K.H. Crosslink mechanisms of high-solids alkyd resins in the presence of reactive diluents. Prog. Org. Coat. 2000, 40:121-130.
89. Ni B., Yang L., Wang C., Wang L., Finlow D.E. Synthesis and thermal properties of soybean oil-based waterborne polyurethane coatings. J. Therm. Anal. Calorim. 2010, 100:239-246.
90. Patel P.N., Raval D.A., Mannari V.M. Two package polyurethane coatings based on acid functional acrylic copolymer modified alkyds for industrial maintenance. Int. J. Polym. Mater. 1998, 39:213-215.
91. Patel A., Patel C., Patel M.G., Patel M., Dighe A. Fatty acid modified polyurethane dispersion for surface coatings: effect of fatty acid content and ionic content. Prog. Org. Coat. 2010, 67:255-263.
92. Patel H.V., Raval J.P., Patel P.S. Hybrid polyurethane coating systems based on renewable material. Int. J. Chem. Tech. Res. 2010, 2:532-542.
93. Patel D.P., Nimavat K.S., Vyas K.B. Surface coating studies of polyurethane derived from [(alkyd)-(epoxy resin treated castor oil)] isocyanate terminated castor oil mixture. Adv. Appl. Sci. Res. 2011, 2:558-566.
94. Pathan S., Ahmad S. S-triazine ring modified waterborne alkyd: synthesis, characterization, antibacterial, and electrochemical corrosion studies. ACS Sustainable Chem. 2013, 1(10):1246-1257.
95. Pathan S., Ahmad S. Synthesis, characterization and effect of s-triazine ring on physico-mechanical and electrochemical corrosion resistance performance of waterborne castor oil alkyd. J. Mater. Chem. A 2013, 1:14227-14238.
96. Petrovic Z.S. Polyurethanes from vegetable oils. Polym. Rev. 2008, 48:109-155.
97. Pramanik S., Sagar K., Konwar B.K., Karak N. Synthesis, characterization and properties of a castor oil modified biodegradable poly(ester amide) resin. Prog. Org. Coat. 2012, 75:569-578.
98. Raghavachar R., Sarnecki G., Baghdachi J., Massingill J. Cationic, thermally cured coatings using epoxidized soybean oil. J. Coat. Technol. 2000, 72:125-133.
99. Raja P.B., Sethuraman M.G. Natural products as corrosion inhibitor for metals in corrosive media-a review. Mater. Lett. 2008, 62:113-116.
100. Riaz U., Vashist A., Ahmad S.A., Ahmad S., Ashraf S.M. Compatibility and biodegradability studies of linseed oil epoxy and PVC blends. Biomass Bioenergy 2010, 34:396-401.
101. Riaz U., Ashraf S.M., Sharma H.O. Mechanical, morphological and biodegradation studies of microwave processed nanostructured blends of some bio-based oil epoxies with poly (vinyl alcohol). Polym. Degrad. Stab. 2011, 96:33-42.
102. Sailer R.A., Wegner J.R., Hurtt G.J., Janson J.E., Soucek M.D. Linseed and sunflower oil alkyd ceramers. Prog. Org. Coat. 1998, 33:117-125.
103. Salimon J., Salih N., Yousif E. Industrial development and applications of plant oils, and their biobased oleochemicals. Ar. J. Chem. 2012, 5:135-145.
104. Saravari O., Praditvatanakit S. Preparation and properties of urethane alkyd based on a castor oil/jatropha oil mixture. Prog. Org. Coat. 2013, 76:698-704.
105. Saravari O., Phapant P., Pimpan V. Synthesis of water-reducible acrylic-alkyd resins based on modified palm oil. J. Appl. Polym. Sci. 2005, 96:1170-1175.
106. Sathiyanathan R.A.L., Maruthamuthu S., Selvanayagam M., Mohanan S., Palaniswamy N. Corrosion inhibition of mild steel by ethanolic extracts of Ricinus communis leaves. Ind. J. Chem. Technol. 2005, 12:356-360.
107. Schuchardt U., Sercheli R., Vargas R.M. Tranesterification of vegetable oil: a review. J. Braz. Chem. Soc. 1998, 9:199-210.
108. Shah M.Y., Ahmad S. Waterborne vegetable oil epoxy coatings: preparation and characterization. Prog. Org. Coat. 2012, 75:248-252.
109. Shan S.Y., Jia Q.M., Jiang L.H., Wang Y.M. Anticorrosive properties of epoxy polyurethane IPNs coatings modified by organic montmorillonite. Mater. Sci. Forum. 2011, 675-677:481-484.
110. Sharmin E., Imo L., Ashraf S.M., Ahmad S. Acrylic-melamine modified DGEBA-epoxy coatings and their anticorrosive behaviour. Prog. Org. Coat. 2004, 50:47-54.
111. Sharmin E., Ashraf S.M., Ahmad S. Epoxidation, hydroxylation, acrylation and urethanation of Linum usitatissimum seed oil and its derivatives. Eur. J. Lipid Sci. Technol. 2007, 109:134-146.
112. Sharmin E., Ashraf S.M., Ahmad S. Synthesis, characterization, antibacterial and corrosion protective properties of epoxies, epoxy-polyols and epoxy-polyurethane coatings from linseed and Pongamia glabra seed oils. Int. J. Biol. Macromol. 2007, 40:407-422.
113. Sharmin E., Akram D., Zafar F., Ashraf S.M., Ahmad S. Plant oil polyol based poly (ester urethane) metallohybrid coatings. Prog. Org. Coat. 2012, 73:118-122.
114. Somani K., Patel N., Kansara S., Rakshit A.K. Polyol from castor oil and epoxy resin for PU coatings. Eur. Coat. J. 2003, 11:35-40.
115. Somani K., Kansara S., Parmar R., Patel N. High solids polyurethane coatings from castor-oil-based polyester-polyols. Int. J. Polym. Mater. 2004, 53:283-293.
116. Srivastava K., Srivastava P. Studies on plant materials as corrosion inhibitors. Br. Corr. J. 1981, 16:221-223.
117. Thakur S., Karak N. Castor oil-based hyperbranched polyurethanes as advanced surface coating materials. Prog. Org. Coat. 2013, 76:157-164.
118. Trumbo D.L., Otto J.T. Epoxidized fatty acid-derived oxazoline in thermoset coatings. J. Coat. Technol. Res. 2004, 1-8:107-111. 2011.
119. Tsujimoto T., Uyama H., Kobayashi S. Synthesis of high-performance green nanocomposites from renewable natural oils. Polym. Degrad. Stab. 2010, 95:1399-1405.
120. Uyama H., Kuwabara M., Tsujimoto T., Nakano M., Usuki A., Kobayashi S. Green nanocomposites from renewable resources: plant oil-clay hybrid materials. Chem. Mater. 2003, 15:2492-2494.
121. Vashist A., Shahabuddin S., Gupta Y.K., Ahmad S. Polyol induced interpenetrating networks: chitosan-methylmethacrylate based biocompatible and pH responsive hydrogels for drug delivery system. J. Mater. Chem. B 2013, 1:168-178.
122. Wisniak J. Jojoba oil and derivatives review article. Prog. Chem. Fats. Lipids. 1977, 15:167-218.
123. Xia Y., Larock R.C. Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem. 2010, 12:1893-1909.
124. Xu Y., Petrovic Z., Das S., Wilkes G.L. Polyols and polyurethanes from hydroformylation of soybean oil. Polymer 2008, 49:4248-4258.
125. Yadav S., Zafar F., Hasnat A., Ahmad S. Poly (urethane fatty amide) resin from linseed oil-a renewable resource. Prog. Org. Coat. 2009, 64:27-32.
126. Zafar F., Sharmin E., Ashraf S.M., Ahmad S. Studies on poly(styrene-co-maleic anhydride) modified polyesteramide-based anticorrosive coatings synthesized from a sustainable resource. J. Appl. Polym. Sci. 2004, 92:2538-2544.
127. Zafar F., Ashraf S.M., Ahmad S. Studies on zinc-containing linseed oil based polyesteramide. React. Funct. Polym. 2007, 67:928-935.
128. Zafar F., Ashraf S.M., Ahmad S. Cd and Zn-incorporated polyesteramide coating materials from seed oil-a renewable resource. Prog. Org. Coat. 2007, 59:68-75.
129. Zafar F., Ashraf S.M., Ahmad S. Low temperature development of Pongamia glabra seed oil based polyesteramide without organic solvent. Bhartiya Vaigyanic Evam Audyogic Anusandhan Patrika. 2007, 15:44-50.
130. Zafar F., Ashraf S.M., Ahmad S. In situ development of Zn/Cd-incorporated poly(esteramide-urethane) from sustainable resource. J. Appl. Polym. Sci. 2008, 110:584-593.
131. Zafar F., Sharmin E., Ashraf S.M., Ahmad S. Ambient-cured polyesteramide-based anticorrosive coatings from linseed oil-a sustainable resource. J. Appl. Polym. Sci. 2008, 97:1818-1824.
132. Zafar F., Kashif M., Sharmin E., Ahmad S. Studies on boron containing poly(urethane fattyamide). Macromol. Symp. 2010, 290:79-84.
133. Zafar, F., Shah, M. Y., Sharmin, E., Ahmad, S., 2010b. Microwave assisted Pongamia pinnate oil based hyperbranched waterborne polymer-a green material. Int conference POLYCHAR 19, World Forum on Advanced Materials, organized by the University o f Siegen, Siegen, Germany on April 7-10.
134. Zafar F., Sharmin E., Kashif M., Rahman O., Pathan S., Khan M.S., Ahmad S. Solvent free microwave synthesis of Pongamia glabra oil based polyesteramide. Bhartiya Vaigyanic Evam Audyogic Anusandhan Patrika. 2010, 1:38-42.
135. Zafar F., Zafar H., Sharmin E., Ahmad S. Studies on self cured zinc-containing Pongamia glabra oil based polyesteramide. Prog. Org. Coat. 2010, 69:517-521.
136. Zafar F., Mir M.H., Kashif M., Sharmin E., Ahmad S. Microwave assisted synthesis of bio-based metallopolyurethaneamide. J. Inorg. Organomet. Polym. 2011, 21:61-68.
137. Zafar F., Zafar H., Sharmin E., Ashraf S.M., Ahmad S. Studies on ambient cured biobased Mn(II), Co(II) and Cu(II) containing metallopolyesteramides. J. Inorg. Organomet. Polym. Mater. 2011, 211:646-654.
138. Zhong B., Shaw C., Rahim M., Massingill J. Novel coatings from soybean oil phosphate ester polyols. J. Coat. Technol. 2001, 73:53-57.
139. Zong Z., He J., Soucek M.D. UV-curable organic-inorganic hybrid films based on epoxynorbornene linseed oils. Prog. Org. Coat. 2005, 53:83-90.
140. Zou K., Soucek M.D. UV-curable organic-inorganic hybrid film coatings based on epoxidized cyclohexene derivatized linseed oil. Macromol. Chem. Phy. 2004, 205:2032-2039.