S-triazine ring-modified waterborne alkyd: Synthesis, characterization, antibacterial, and electrochemical corrosion studies

ACS Sustainable Chemistry and Engineering

Volumn 1, Issue 10, 2013, Pages 1246-1257

  Pathan, Shabnam ^a   Ahmad, Sharif ^a  

^a JAMIA MILLIA ISLAMIA CENTRAL UNIVERSITY   (India)

Author keywords

Antibacterial activity; Corrosion resistance; EIS; Green solvent; Vegetable oil; Waterborne

Indexed keywords

ANTI-BACTERIAL ACTIVITY; EIS; GEL PERMEATION CHROMATOGRAPHY (GPC); GREEN SOLVENTS; INITIAL DECOMPOSITION TEMPERATURES; PHYSICOMECHANICAL PROPERTIES; VOC (VOLATILE ORGANIC COMPOUNDS); WATERBORNE;

BACTERIA; CORROSION PROTECTION; CORROSION RESISTANCE; DIFFERENTIAL SCANNING CALORIMETRY; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; ENZYME INHIBITION; ESCHERICHIA COLI; GEL PERMEATION CHROMATOGRAPHY; MECHANICAL PROPERTIES; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; THERMOGRAVIMETRIC ANALYSIS; VEGETABLE OILS; VOLATILE ORGANIC COMPOUNDS;

COATINGS;

EID: 84885343244     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/sc4001077     Document Type: Article

References (62)

1. Uday, K.; Niranjan, K. Hyperbranched polyether core containing vegetable oil-modified polyester and its clay nanocomposites Polym. J. 2011, 43, 565-576
2. Haq, M.; Burgueño, R.; Mohanty, A. K.; Misra, M. Hybrid bio-based composites from blends of unsaturated polyester and soybean oil reinforced with nanoclay and natural fibers Compos. Sci. Technol. 2008, 68, 3344-3351
3. Sean, E.; Alex, M. C.; Antony, J. W. Incorporating green chemistry concepts into mobile chemistry applications and their potential uses ACS Sustainable Chem. Eng. 2013, 1, 8-13
4. Raquez, J. M.; Deléglise, M.; Lacrampe, M. F.; Krawczak, P. Thermosetting biomaterials derived from renewable resources: a critical review Prog. Polym. Sci. 2010, 35, 487-509
5. Yu, L.; Dean, K.; Li, L. Polymer blends and composites from renewable resources Prog. Polym. Sci. 2006, 31, 576-602
6. Meier, M.; Metzger, J. O.; Schubert, U. S. Plant oil renewable resources as green alternatives in polymer science Chem. Soc. Rev. 2007, 36, 1788-1802
7. Uyama, H.; Kuwabara, M.; Tsujimoto, T.; Nakano, M.; Usuki, A.; Kobayashi, S. Green nanocomposite from renewable resources: Plant oil-clay hybrid materials Chem. Mater. 2003, 15, 2492-2494
8. Pramanik, S.; Konwarh, R.; Sagar, K.; Konwar, B. K.; Karak, N. Bio-degradable vegetable oil based hyperbranched poly(ester amide) as an advanced surface coating material Prog. Org. Coat. 2013, 76, 689-697
9. Alam, M.; Sharmin, E.; Ashraf, S. M.; Ahmad, S. Newly developed urethane modified polyetheramide-based anticorrosive coatings from a sustainable resource Prog. Org. Coat. 2004, 50, 224-230
10. Leila, H.; Xiaohua, K.; Suresh, S. N. Fatty acid-derived diisocyanata and biobased polyurethane produced from vegetable oil: Synthesis, polymerization, and characterization Biomacromolecules 2009, 10, 884-891
11. Sarvat, Z.; Uffana, R.; Sharif, A. Water-borne melamine-formaldehyde- cured epoxy-acrylate corrosion resistant coatings J. Appl. Polym. Sci. 2008, 107, 215-222
12. Saravari, O.; Phapant, P.; Pimpan, V. Synthesis of water-reducible acrylic-alkyd resins based on modified palm oil J. Appl. Polym. Sci. 2005, 96, 1170-1175
13. Tsujimoto, T.; Uyama, H.; Kobayashi, S. Synthesis of high-performance green nanocomposites from renewable natural oils Polym. Degrad. Stab. 2010, 95, 1399-1405
14. Yousefi, A. A.; Pishvaei, M.; Yousef, A. Preparation of water-based alkyd/acrylic hybrid resins Prog. Color Colorants Coat. 2011, 4, 15-25
15. Christian, A.; Goran, S. Multilayered alkyd resin/nanocellulose coatings for use in renewable packaging solutions with a high level of moisture resistance Ind. Eng. Chem. Res. 2013, 52, 2582-2589
16. Lihui, Z.; Hong, Z.; Jinshan, G. Synthesis and properties of UV curable polyester-based waterborne polyurethane: Functionalization silica composites and morphology of their nanostructured films Ind. Eng. Chem. Res. 2012, 51, 8434-8441
17. Wang, C.; Jones, F. N. Stability and film properties of tung oil modified soybean alkyd emulsion J. Appl. Polym. Sci. 2000, 78, 1698
18. Athawale, V. D.; Nimbalkar, R. V. Waterborne coatings based on renewable oil resources: An overview J. Am. Oil. Chem. Soc. 2011, 88, 159-185
19. Akbarinezhad, E.; Ebrahimi, M.; Kassiriha, S. M.; Khorasani, M. Synthesis and evaluation of water-reducible acrylic-alkyd resins with high hydrolytic stability Prog. Org. Coat. 2009, 65, 217-221
20. Borah, J.; Mahapatra, S. S.; Saikia, D.; Karak, N. Physical, thermal, dielectric and chemical properties of a hyperbranched polyether and its linear analog Polym. Degrad. Stab. 2006, 91, 2911-2916
21. Xinbo, S.; Zhengbing, C.; Nuala, P.; Yuyu, S. Amine, melamine, and amide N -halamines as antimicrobial additives for polymers Ind. Eng. Chem. Res. 2010, 49, 11206-11213
22. Chen, Y.; Wilbon, P. A.; Chen, Y. P; Zhou, J.; Nagarkatti, M.; Wang, C.; Chu, F.; Dechob, A. W.; Tang, C. Amphipathic antibacterial agents using cationic methacrylic polymers with natural rosin as pendant group RSC Adv. 2012, 2, 10275-10282
23. Kenawy, E. R.; Worley, S. D.; Broughton, R. The chemistry and applications of antimicrobial polymers: A state-of-the-art review Biomacromolecules 2007, 8, 1359-1384
24. Aigbodion, A. I.; Okiemien, F. E.; Obazaa, E. O.; Bakare, I. O. Utilisation of maleinized rubber seed oil and its alkyd resin as binders in water-borne coatings Prog. Org. Coat. 2003, 46, 28-31
25. Aigbodion, A. I.; Okiemien, F. E.; Ikhuoria, E. U.; Bakare, I. O.; Obazaa, E. O. Rubber seed oil modified with maleic anhydride and fumaric acid and their alkyd resins as binders in water-reducible coatings J. Appl. Polym. Sci. 2003, 89, 3256-3259
26. Dhoke, S. K.; Khanna, A. S.; Sinha, T. J. M. Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings Prog. Org. Coat. 2009, 64, 371-382
27. Patton, T. C. Alkyd Resin Technology; Interscience Publisher: New York, 1962.
28. Wang, X.; Wang, J.; Li, Q.; Li, S. Synthesis and characterization of waterborne epoxy-acrylic corrosion-resistant coatings J. Macromol. Sci., Part B: Phys. 2013, 52, 751-761
29. Dhoke, S. K.; Sinha, T. J. M.; Dutta, P.; Khanna, A. S. Formulation and performance study of low molecular weight, alkyd-based waterborne anticorrosive coating on mild steel Prog. Org. Coat. 2008, 62, 183-192
30. Ahmad, S.; Ashraf, S. M.; Sharmin, E.; Nazir, M.; Alam, M. Studies on new polyetheramide-butylated melamine formaldehyde based anticorrosive coatings from a sustainable resource Prog. Org. Coat. 2005, 52, 85-91
31. Radicevic, R.; Jovicic, M.; Simendic, J. B. Preparation and curing of alkyd based on ricinoleic acid/melamine coatings Prog. Org. Coat. 2011, 71, 256-264
32. Pelezar, M. J.; Chem, C. S.; Reid, R. D. Microbiology; McGraw Hill: New York, 1990.
33. Elmorsi, M. A.; Issa, R. M. Corrosion of metal pipes in ground water B. Electrochem. 1988, 4, 785-788
34. Nimbalkar, R. V.; Athawale, V. D. Synthesis and characterization of canola oil alkyd resins based on novel acrylic monomer (ATBS) J. Am. Oil Chem. Soc. 2010, 87, 947-954
35. Farber, I. Y.; Beyth, N.; Weiss, E. I.; Domb, A. J. Antibacterial effect of composite resins containing quaternary ammonium polyethyleneimine nanoparticles J. Nanopart. Res. 2010, 12, 591-603
36. Spyros, A. Characterization of unsaturated polyester and alkyd resins using one- and two-dimensional NMR spectroscopy J. Appl. Polym. Sci. 2003, 88, 1881-1888
37. Pavia, D. L.; Lampman, G. M.; Kriz, G. S.; Vyvyan, J. R. Spectroscopy; Cengage Learning: Canada, 2007.
38. Karak, N.; Roy, B.; Voit, B. s-Triazine-based hyperbranched polyethers: Synthesis, characterization and properties J. Polym. Sci., Part A: Polym. Chem. 2010, 48, 3994-4004
39. Mahapatra, S.; Karak, N. Fluorescent hyperbranched polyamine with s -triazine: Synthesis, characterization and properties evaluation Polym. J. 2009, 41, 20-25
40. Konwar, U.; Karak, N. Hyperbranched polyether core containing vegetable oil-modified polyester and its clay nanocomposites Polym. J. 2011, 43, 565-576
41. Ahmad, S.; Ashraf, S. M.; Kumar, G. S.; Hasnat, A.; Sharmin, E. Studies on epoxy-butylated melamine formaldehyde-based anticorrosive coatings from a sustainable resource Prog. Org. Coat. 2006, 56, 207-213
42. Weng, C. J.; Chang, C. H.; Peng, C. W.; Chen, S. W.; Yeh, J. M.; Hsu, C. L.; Wei, Y. Advanced anticorrosive coatings prepared from the mimicked xanthosoma sagittifolium-leaf-like electroactive epoxy with synergistic effects of superhydrophobicity and redox catalytic capability Chem. Mater. 2011, 23, 2075-2083
43. De, B.; Karak, N. Novel high performance tough hyperbranched epoxy by an A2 + B3 polycondensation reaction J. Mater. Chem. A. 2013, 1, 348-353
44. Akshya, K. G.; Suryakanta, N.; Tapan, K. R.; Nikhiles, B.; Dillip, K. S. Corrosion resistance nano-hybrid sol-gel coating on steel sheet ISIJ Int. 2011, 51, 435-440
45. Narayan, R.; Chattopadhyay.; Sreedhar, B.; Raju, V. S. N. Cure, viscoelastic and mechanical properties of hydroxylated polyester melamine high solids coatings J. Mater. Sci. 2002, 37, 4911-4918
46. Pan, X.; Sengupta, P.; Webster, D. C. High biobased content epoxy-anhydride thermosets from epoxidized sucrose esters of fatty acids Biomacromolecules 2011, 12, 2416-2428
47. Sarvat, Z.; Fahmina, Z.; Ufana, R.; Sharif, A. Synthesis, characterization, and anticorrosive coating properties of waterborne interpenetrating polymer network based on epoxy-acrylic-oleic acid with butylated melamine formaldehyde J. Appl. Polym. Sci. 2009, 113, 827-838
48. Chattopadhyay, D. K.; Webster, D. C. Thermal stability and flame retardancy of polyurethanes Prog. Polym. Sci. 2009, 34, 1068-1133
49. Zhou, Y.; Min, J.; Lui, Z.; Young, H.; Deshazer, H.; Gao, T.; Chang, T. C.; Kallenbach, N. R. Synthesis and biological evaluation of novel 1,3,5-triazine derivatives as antimicrobial agents Bioorg. Med. Chem. Lett. 2008, 18, 1308-1311
50. Dizman, B.; Elasri, M. O.; Mathias, L. J. Synthesis, characterization, and antibacterial activities of novel methacrylate polymers containing norfloxacin Biomacromolecules 2005, 6, 514-520
51. Timofeeva, L. M.; Kleshcheva, N. A.; Moroz, A. F.; Didenko, L. V. Secondary and tertiary polydiallylammonium salts: Novel polymers with high antimicrobial activity Biomacromolecules 2009, 10, 2976-2986
52. Yang, T.; Peng, C. W.; Lin, Y. L.; Weng, C. J.; Edgington, G.; Mylonakis, A.; Huang, T. C.; Hsu, C. H.; Yeh, J. M.; Wei, Y. Synergistic effect of electroactivity and hydrophobicity on the anticorrosion property of room-temperature-cured epoxy coatings with multi-scale structures mimicking the surface of Xanthosoma sagittifolium leaf J. Mater. Chem. 2012, 22, 15845-15852
53. Shukla, S. K.; Singh, A. K.; Quraishi, M. A. Triazines: Efficient corrosion inhibitors for mild steel in hydrochloric acid solution Int. J. Electrochem. Sci. 2012, 7, 3371-3389
54. Phanasgaonkar, A.; Raja, V. S. Influence of curing temperature, silica nanoparticles and cerium on surface morphology and corrosion behaviour of hybrid silane coatings on mild steel Surf. Coat. Technol. 2009, 203, 2260-2271
55. Ahmad, S.; Zafar, F.; Sharmin, E.; Garg, N.; Kashif, M. Synthesis and characterization of corrosion protective polyurethanefattyamide/silica hybrid coating material Prog. Org Coat. 2012, 73, 112-117
56. Wang, Y. B.; Li, H. F.; Zheng, Y. F.; Wei, S. C.; Li, M. Correlation between corrosion performance and surface wettability in ZrTiCuNiBe bulk metallic glasses Appl. Phys. Lett. 2010, 96, 251909-1
57. Peng, C. W.; Chang, K. C.; Weng, C. J.; Lai, M. C.; Hsu, C. H.; Hsu, S. C.; Li, S. Y.; Weib, Y.; Yeh, J. M. UV-curable nanocasting technique to prepare bio-mimetic super-hydrophobic non-fluorinated polymeric surfaces for advanced anticorrosive coatings Polym. Chem. 2013, 4, 926-932
58. Yadav, D. K.; Chauhan, D. S.; Ahamad, I.; Quraishi, M. A. Electrochemical behavior of steel/acid interface: adsorption and inhibition effect of oligomeric aniline RSC Adv. 2013, 3, 632-646
59. Mahdavian, M.; Ashhari, S. Corrosion inhibition performance of 2-mercaptobenzimidazole and 2-mercaptobenzoxazole compounds for protection of mild steel in hydrochloric acid solution Electrochim. Acta 2010, 55, 1720-1724
60. Ahamad, I.; Quraishi, M. A. Mebendazole: New and efficient corrosion inhibitor for mild steel in acid medium Corros. Sci. 2010, 52, 651-656
61. Zang, R. Z.; langroudi, A. E; Rahimi, A. Silica based organic-inorganic hybrid nanocomposite coatings for corrosion protection Prog. Org. Coat. 2005, 53, 286-291
62. Zheludkevich, M. L.; Salvodo, I. M.; Ferreira, M. G. S. Sol-gel coatings for corrosion protection of metals J. Mater. Chem. 2005, 15, 5099-5111