Jet-based methods to print living cells

Biotechnology Journal

Volumn 1, Issue 9, 2006, Pages 930-948

  Ringeisen, Bradley R ^a   Othon, Christina M ^a   Barron, Jason A ^a,c   Young, Daniel ^b   Spargo, Barry J ^a  

^a NAVAL RESEARCH LABORATORY   (United States)

^b Wright State University   (United States)

^c Sterne Kessler Goldstein and Fox PLLC   (United States)

Author keywords

Cell printing; Organ printing; Rapid prototyping; Tissue engineering; Tissue printing

Indexed keywords

CELL PRINTING; CELL VIABILITY; DIRECT WRITE; EUKARYOTIC CELLS; FLUID JETTING; GLASS SLIDES; LASER GUIDANCE; LASER INDUCED FORWARD TRANSFER; LIVING CELL; LOW COSTS; ORGAN PRINTING; PRINTING TECHNOLOGIES; SPINAL-CORD; TISSUE PRINTING; VIABLE CELLS;

CELLS; CYTOLOGY; ELECTROHYDRODYNAMICS; PRINTING; RAPID PROTOTYPING; THREE DIMENSIONAL; TISSUE; TISSUE ENGINEERING;

SCAFFOLDS (BIOLOGY);

INK;

ANIMAL; CELL CULTURE; CELL SURVIVAL; COMPUTER; CULTURE TECHNIQUE; GENOTYPE; HUMAN; LASER; METHODOLOGY; PHENOTYPE; PRINTING; REVIEW; TISSUE ENGINEERING;

ANIMALS; CELL CULTURE TECHNIQUES; CELL SURVIVAL; CELLS, CULTURED; COMPUTER PERIPHERALS; GENOTYPE; HUMANS; INK; LASERS; PHENOTYPE; PRINTING; TISSUE ENGINEERING;

EID: 34249828915     PISSN: 18606768     EISSN: 18607314     Source Type: Journal    
DOI: 10.1002/biot.200600058     Document Type: Review

References (108)

1. Odde, D. J., Renn, M. J., Laser-guided direct writing for applications in biotechnology. Trends Biotechnol. 1999, 17, 385-389.
2. Odde, D. J., Renn, M. J., Laser-guided direct writing of living cells. Biotechnol. Bioeng. 2000, 67, 312-318.
3. Ringeisen, B. R., Chrisey, D. B., Pique, A., Young, H. D. et al., Generation of mesoscopic patterns of viable Escherichia coli by ambient laser transfer. Biomaterials 2001, 23, 161-166.
4. Zergioti, I., Mailis, S., Vainos, N. A., Papakonstantinou, P. et al., Microdeposition of metal and oxide structures using ultrashort laser pulses. App. Phys. A: Mater. Sci. Process. 1998, 66, 579-582.
5. Zergioti, I., Mailis, S., Vainos, N. A., Fotakis, C. et al., Microdeposition of metals by femtosecond excimer laser. Appl. Surf. Sci. 1998, 127-129, 601-605.
6. Acquaviva, S., Perrone, A., Zocco, A., Klini, A., Fotakis, C., Deposition of carbon nitride films by reactive sub-picosecond pulsed laser ablation. Thin Solid Films 2000, 373, 266-272.
7. Zergioti, I., Karaiskou, A., Papazoglou, D. G., Fotakis, C. et al., Time resolved schlieren study of sub-picosecond and nanosecond laser transfer of biomaterials. [Erratum to document cited in CA143:401847]. Appl. Surf. Sci. 2005, 249, 433.
8. Zergioti, I., Karaiskou, A., Papazoglou, D. G., Fotakis, C. et al., Time resolved schlieren study of sub-picosecond and nanosecond laser transfer of biomaterials. Appl. Surf. Sci. 2005, 247, 584-589.
9. Zergioti, I., Karaiskou, A., Papazoglou, D. G., Fotakis, C., et al., Femtosecond laser microprinting of biomaterials. Appl. Phys. Lett. 2005, 86, 163902/1-/3.
10. Barron, J. A., Wu, P., Ladouceur, H. D., Ringeisen, B. R., Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns. Biomed. Microdevices 2004, 6, 139-147.
11. Chen, C. Y., Barron, J. A., Ringeisen, B. R., Cell patterning without chemical surface modification: cell-cell interacftions between bovine aortic endothelial cells (BAEC) on a homogeneous cell-adherent hydrogel. Appl. Surf. Sci. 2006, in press.
12. Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B. et al., Laser printing of pluripotent embryonal carcinoma cells. Tissue Eng. 2004, 10, 483-491.
13. Hopp, B., Smausz, T., Kresz, N., Barna, N. et al., Survival and proliferative ability of various living cell types after laser-induced forward transfer. Tissue Eng. 2005, 11, 1817-1823.
14. Barron, J. A., Krizman, D. B., Ringeisen, B. R., Laser printing of single cells: statistical analysis, cell viability, and stress. Ann. Biomed. Eng. 2005, 33, 121-130.
15. Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., Chrisey, D. B., Application of laser printing to mammalian cells. Thin Solid Films 2004, 453-454, 383-387.
16. Barron, J. A., Rosen, R., Jones-Meehan, J., Spargo, B. J. et al., Biological laser printing of genetically modified Escherichia coli for biosensor applications. Biosens. Bioelectron. 2004, 20, 246-252.
17. Barron, J. A., Spargo, B. J., Ringeisen, B. R., Biological laser printing of three dimensional cellular structures. App. Phys. A: Mater. Sci. Process. 2004, 79, 1027-1030.
18. Hood, B. L., Darfler, M. M., Guiel, T. G., Furusato, B. et al., Proteomic analysis of formalin-fixed prostate cancer tissue. Mol. Cell. Proteomics 2005, 4, 1741-1753.
19. Fernandez-Pradas, J. M., Colina, M., Serra, P., Dominguez, J., Morenza, J. L., Laser-induced forward transfer of biomolecules. Thin Solid Films 2004, 453-454, 27-30.
20. Zandonella, C., New body parts at the stroke of a laser pen. New Scientist 2001, 170, 24.
21. Boland, T., Mironov, V., Gutowska, A., Roth, E. A., Markwald, R. R., Cell and organ printing 2: fusion of cell aggregates in three-dimensional gels. Anat. Rec. Part A 2003, 272, 497-502.
22. Mironov, V., Boland, T., Trusk, T., Forgacs, G., Markwald, R. R., Organ printing: computer-aided jet-based 3D tissue engineering. Trends Biotechnol. 2003, 21, 157-161.
23. Wilson, W. C. Jr., Boland, T., Cell and organ printing 1: protein and cell printers. Anat. Rec., Part A 2003, 272, 491-496.
24. Mironov, V., Markwald, R. R., Forgacs, G., Organ printing: self-assembling cell aggregates as " bioink" . Sci. & Med. 2003, 9, 69-71.
25. Saltzman, W. M., Tissue Engineering: Engineering Principles for the Design of Replacement Organs and Tissues, 1st edn., Oxford University Press, New York 2004.
26. Williams, D., Sebastine, I., Tissue engineering and regenerative medicine: manufacturing challenges. IEE Proc. Nanobiotechnol. 2005, 152, 207-210.
27. Cortesini, R., Stem cells, tissue engineering and organogenesis in transplantation. Transpl. Immunol. 2005, 15, 81-89.
28. Murugan, R., Ramakrishna, S., Review article: nano-featured scaffolds for tissue engineering: a review of spinning methodologies. Tissue Eng. 2006, 12, 435-447.
29. Norman, J., Desai, T., Methods for fabrication of nanoscale topography for tissue engineering scaffolds. Ann. Biomed. Eng. 2006, 34, 89-101.
30. Yang, S. F., Leong, K. F., Du, Z. H., Chua, C. K., The design of scaffolds for use in tissue engineering. Part 1. Traditional factors. Tissue Eng. 2002, 7, 679-689.
31. Vasita, R., Katti, D., Growth factor-delivery systems for tissue engineering: a materials perspective. Expert Rev. Med. Devices 2006, 3, 29-47.
32. Ma, P. X., Scaffolds for tissue fabrication. Mater. Today 2004, 7, 30-40.
33. Chen, V. J., Ma, P. X., Nano-fibrous poly(l-lactic acid) scaffolds with interconnected spherical macropores. Biomaterials 2004, 25, 2065-2073.
34. Ma, P. X., Choi, J.-W., Biodegradable polymer scaffolds with welldefined interconnected spherical pore network. Tissue Eng. 2001, 7, 23-33.
35. Ma, P. X., Zhang, R., Synthetic nanoscale fibrous extracellular matrix. J. Biomed. Mater. Res. 1999, 46, 60-72.
36. Lee, K. Y., Peters, M. C., Mooney, D. J., Controlled drug delivery from polymers by mechanical signals. Adv. Mater. 2001, 13, 837-839.
37. Lee, K. Y., Mooney, D. J., Hydrogels for tissue engineering. Chem. Rev. 2001, 101, 1869-1879.
38. Shea, L., Smiley, E., Bonadio, J., Mooney, D. J., DNA delivery from polymer matrices for tissue engineering. Nat. Biotechnol. 1999, 17, 551-554.
39. Humes, H., Stem cells: the next therapeutic frontier. Trans. Am. Clin. Climatol. Assoc. 2005, 116, 167-184.
40. Spargo, B. J., Testoff, M. A., Nielsen, T. B., Stenger, D. A. et al., Spatially controlled adhesion, spreading, and differentiation of endothelial cells on self-assembled molecular monolayers. Proc. Natl. Acad. Sci. USA 1994, 91, 11070-11074.
41. Xia, Y., Whitesides, G. M., Soft lithography. Annu. Rev. Mater. Sci. 1998, 28, 153-184.
42. Wilbur, J. L., Kumar, A., Biebuyck, H. A., Kim, E., Whitesides, G. M., Microcontact printing of self-assembled monolayers: applications in microfabrication. Nanotechnology 1996, 7, 452-457.
43. Tien, J., Nelson, C., Chen, C., Fabrication of aligned microstructures with a single elastomeric stamp. Proc. Natl. Acad. Sci. USA 2002, 99, 1758-1762.
44. Kane, R. S., Takayama, S., Ostuni, E., Ingber, D. E., Whitesides, G. M., Patterning proteins and cells using soft lithography. Biomaterials 1999, 20, 2363-2376.
45. Lahiri, J., Ostuni, E., Whitesides, G. M., Patterning ligands on reactive SAMs by microcontact printing. Langmuir 1999, 15, 2055-2060.
46. Falconnet, D., Csucs, G., Michelle Grandin, H., Textor, M., Surface engineering approaches to micropattern surfaces for cell-based assays. Biomaterials 2006, 27, 3044-3063.
47. Veiseh, M., Wickes, B., Castner, D., Zhang, M., Guided cell patterning on gold-silicon dioxide substrates by surface molecular engineering. Biomaterials 2004, 25, 3315-3324.
48. Folch, A., Toner, M., Microengineering of cellular interactions. Annu. Rev. Biomed. Eng 2000, 2, 227-256.
49. Folch, A., Jo, B. H., Hurtado, O., Beebe, D. J., Toner, M., Microfabricated elastomeric stencils for micropatterning cell cultures. J. Biomed. Mater. Res. 2000, 52, 346-353.
50. Khademhosseini, A., Langer, R., Borenstein, J., Vacanti, J., Microscale technologies for tissue engineering and biology. Proc. Natl. Acad. Sci. USA 2006, DOI 10.1073/pnas.0507681102.
51. Guan, J., He, H., Hansford, D., Lee, L., Self-folding of three-dimensional hydrogel microstructures. J. Phys. Chem. B 2005, 109, 23134-23137.
52. Kubicek, J., Brelsford, S., Ahluwalia, P., Leduc, P., Integrated lithographic membranes and surface adhesion chemistry for three-dimensional cellular stimulation. Langmuir 2004, 20, 11552-11556.
53. Vozzi, G., Flaim, C., Ahluwalia, A., Bhatia, S., Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition. Biomaterials 2003, 24, 2533-2540.
54. Yang, S., Leong, K., Du, Z., Chua, C., The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng. 2002, 8, 1-11.
55. Sun, W., Lal, P., Recent developments on computer aided tissue engineering, a review. Comput. Methods Prog. Biomed. 2002, 67, 85-103.
56. Kim, S., Utsunomiya, H., Koski, J., Wu, B. et al., Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels. Ann. Surg. 1998, 228, 8-13.
57. Koegler, W., Griffith, L., Osteoblast response to PLGA tissue engineering scaffolds with PEO modified surface chemistries and demonstration of patterned cell response Biomaterials 2004, 25, 2819-2830.
58. Landers, R., Hubner, U., Schmelzeisen, R., Mulhaupt, R., Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials 2002, 23, 4437-4447.
59. Taylor, P., Sachlos, E., Dreger, S., Chester, A., Czernuszka, J., Yacoub, M., Interaction of human valve interstitial cells with collagen matrices manufactured using rapid prototyping. Biomaterials 2006, 27, 2733-2737.
60. Woodfield, T., Malda, J., de Wijn, J., Peters, F. et al., Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. Biomaterials 2004, 25, 4149-4161.
61. Vozzi, G., Flaim, C., Ahluwalia, A., Bhatia, S., Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition. Biomaterials 2003, 24, 2533-2540.
62. Leong, K., Cheah, C., Chua, C., Solid freeform fabrication of threedimensional scaffolds for engineering replacement tissues and organs. Biomaterials 2003, 24, 2363-2378.
63. Wang, X., Yan, Y., Pan, Y., Xiong, Z. et al., Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system. Tissue Eng. 2006, 12, 83-90.
64. Yan, Y., Wang, X., Pan, Y., Liu, H. et al., Fabrication of viable tissueengineered constructs with 3D cell-assembly technique. Biomaterials 2005, 26, 5864-5871.
65. Khalil, S., Nam, J., Sun, W., Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds. Rapid Prototyping J. 2005, 11, 9-17.
66. Jakab, K., Neagu, A., Mironov, V., Forgacs, G., Organ printing: Fiction or science. Biorheology 2004, 41, 371-375.
67. Jeong, B., Gutowska, A., Lessons from nature: stimuli-responsive polymers and their biomedical applications. Trends Biotechnol. 2002, 20, 305-311.
68. An, Y. H., Regaining chondrocyte phenotype in thermo-reversible gel culture. Anat. Rec. 2001, 263, 336-341.
69. Saunders, R., Bosworth, L., Gough, J., Derby, B., Reis, N., Selective cell delivery for 3D tissue culture and engineering. Eur. Cells Mater. 2004, 7, Suppl. 1, 84.
70. Othman, S., Xu, H., Royston, T., Magin, R., Microscopic magnetic resonance elastography (microMRE). Magn. Reson. Med. 2005, 54, 605-615.
71. Ashkin, A., Acceleration and trapping of particles by radiation pressure. Phys. Rev. Lett. 1970, 24, 156.
72. Konig, K., Tadir, Y., Patrizio, P., Berns, M., Tromberg, B., Effects of ultraviolet exposure and near infrared laser tweezers on human spermatozoa. Hum. Reprod. 1996, 11, 2162-2164.
73. Liang, H., Vu, K., Krishnan, P., Trang, T. et al., Wavelength dependence of cell cloning efficiency after optical trapping. Biophys. J. 1996, 70, 1529-1533.
74. Direct-Write Technologies for Rapid Prototyping Applications, Academic Press, San Diego 2002
75. Guduru, S., Narasimhan, S., Birchfield, S., Gao, B., in Proceedings of the 2nd International IEEE EMBS Special Topic Conference on Neural Engineering, 16-19 March 2005, Washington, DC, USA.
76. De Silva Mauris, N., Paulsen, J., Renn Michael, J., Odde David, J., Two-step cell patterning on planar and complex curved surfaces by precision spraying of polymers. Biotechnol. Bioeng. 2006, 93, 919-927.
77. Barron, J., Young, H., Dlott, D., Darfler, M. et al., Printing of protein microarrays via a capillary-free fluid jetting mechanism. Proteomics 2005, 5, 4138-4144.
78. Young, H. D., Auyeung, R. C. Y., Ringeisen, B. R., Chrisey, D. B., Dlott, D. D., in U.S. Pat. Appl. Publ., (The United States of America as represented by the Secretary of the Navy, USA). Us, 2003, pp. 16 pp., Cont.-in-part of U.S. Pat. Appl. 2002 197,401.
79. Chrisey, D., Pique, A., McGill, R., Horwitz, J. et al., Laser deposition of polymer and biomaterial films. Chem. Rev. 2003, 103, 553-576.
80. Ringeisen, B. R., Barron, J. A., Spargo, B. J., Novel seeding mechanisms to form multilayer heterogeneous cell constructs. Mater. Res. Soc. Symp. Proc. 2004, EXS-1, 105-107.
81. Young, D., Auyeung, R., Piqué, A., Chrisey, D., Dlott, D., Dlott, plume and jetting regimes in a laser based forward transfer process as observed by time-resolved optical microscopy. Appl. Surf. Sci. 2002, 197, 181-187.
82. Young, D., Auyeung, R., Piqué, A., Chrisey, D., Dlott, D., Dlott, Time resolved optical microscopy of a laser-based forward transfer process. Appl. Phys. Lett. 2001, 78, 3139-3171.
83. Ringeisen, B., Wu, P., Kim, H., Pique, A. et al., Picoliter-scale protein microarrays by laser direct write. Biotechnol. Prog. 2002, 18, 1126-1129.
84. Colina, M., Serra, P., Fernandez-Pradas, J. M., Sevilla, L., Morenza, J. L., DNA deposition through laser induced forward transfer. Biosens. Bioelectron. 2005, 20, 1638-1642.
85. Kesari, P., Xu, T., Boland, T., Layer-by-layer printing of cells and its application to tissue engineering. Mater. Res. Soc. Symp. Proc. 2005, 845, 111-117.
86. Mironov, V., Boland, T., Trusk, T., Forgacs, G., Markwald, R. R., Organ printing: computer-aided jet-based 3D tissue engineering. [Erratum to document cited in CA140:038057]. Trends Biotechnol. 2004, 22, 265.
87. Miller, E. D., Fisher, G. W., Weiss, L. E., Walker, L. M., Campbell, P. G., Dose-dependent cell growth in response to concentration modulated patterns of FGF-2 printed on fibrin. Biomaterials 2006, 27, 2213-2221.
88. Saunders, R., Gough, J., Derby, B., Ink jet printing of mammalian primary cells for tissue engineering applications. Mater. Res. Soc. Symp. Proc. 2005, 845, 57-62.
89. Xu, T., Jin, J., Gregory, C., Hickman, J. J., Boland, T., Inkjet printing of viable mammalian cells. Biomaterials 2005, 26, 93-99.
90. Saunders, R., Derby, B., Gough, J., Reis, N., Ink-jet printing of human cells. Mater. Res. Soc. Symp. Proc. 2004, EXS-1, 95-97.
91. Roth, E. A., Xu, T., Das, M., Gregory, C. et al., Ink-jet printing for high-throughput cell patterning. Biomaterials 2004, 25, 3707-3715.
92. Watanabe, K., Miyazaki, T., Matsuda, R., Growth factor array fabrication using a color ink jet printer. Zool. Sci. 2003, 20, 429-434.
93. Nakamura, M., Application of inkjet technology for tissue engineering. Bio Industry 2004, 21, 68-76.
94. Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A. et al., Biocompatible inkjet printing technique for designed seeding of individual living cells. Tissue Eng. 2005, 11, 1658-1666.
95. Pardo, L., Boland, T., Characterization of patterned self-assembled monolayers and protein arrays generated by the ink-jet method. Langmuir 2003, 19, 1462-1466.
96. Aden, J., Bohoquez, J., Collins, D., Crook, M. et al., The third generation of HP thermal inkjet printhead. Hewlett-Packard J. 1994, 45, 41-45.
97. van Dam, D., Clerc, C., Experimental study of the impact of an impact of an ink-jet droplet of a solid substrate. Phys. Fluids 2004, 16, 3403-3414.
98. Xu, T., Gregory, C. A., Molnar, P., Cui, X. et al., Viability and electrophysiology of neural cell structures generated by the inkjet printing method. Biomaterials 2006, 27, 3580-3588.
99. Jayasinghe, S. N., Eagles, P. A. M., Qureshi, A. N., Electric field driven jetting: an emerging approach for processing living cells. Biotechnol. J. 2006, 1, 86-94.
100. Eagles, P. A. M., Qureshi, A. N., Jayasinghe, S. N., Electrohydrodynamic jetting of mouse neuronal cells. Biochem. J. 2006, 394, 375-378.
101. Jayasinghe, S. N., Qureshi, A. N., Eagles, P. A. M., Electrohydrodynamic jet processing: An advanced electric-field-driven jetting phenomenon for processing living cells. Small 2006, 2, 216-219.
102. Jayasinghe, S. N., An advanced jet-based approach to processing nanotubes. Physica E: Low-Dimensional Systems & Nanostructures 2006, 31, 17-26.
103. Pareta, R., Brindley, A., Edirisinghe, M. J., Jayasinghe, S. N., Luklinska, Z. B., Electrohydrodynamic atomization of protein (bovine serum albumin). J. Mater. Sci. Mater. Med. 2005, 16, 919-925.
104. Wang, D. Z., Jayasinghe, S. N., Edirisinghe, M. J., High resolution print-patterning of a nano-suspension. Nanoparticle Res. 2005, 7, 301-306.
105. Wang, D. Z., Jayasinghe, S. N., Edirisinghe, M. J., Instrument for electrohydrodynamic print-patterning three-dimensional complex structures. Rev. Sci. Instrum. 2005, 76, 075105/1-/5.
106. Jayasinghe, S. N., Edirisinghe, M. J., Jet break-up in nano-suspensions during electrohydrodynamic atomization in the stable conejet mode. J. Nanosci. Nanotechnol. 2005, 5, 923-926.
107. Loscertales, I. G., Barerro, A., Guerrero, I., Cortijo, R. et al., Micro/ nano encapsulation via electrified liquid jets. Science 2002, 295, 1695-1698.
108. Bocanegra, R., Galan, D., Marquez, M., Loscertales, I., Barrero, A., Multiple electrosprays emitted from an array of holes. J. Aerosol Sci. 2005, 36, 1387-1399.