Rapid manufacturing techniques for the tissue engineering of human heart valves

European Journal of Cardio-thoracic Surgery

Volumn 46, Issue 4, 2014, Pages 593-601

  Lueders, Cora ^a   Jastram, Ben ^b   Hetzer, Roland ^a   Schwandt, Hartmut ^b  

^a DEUTSCHES HERZZENTRUM BERLIN   (Germany)

^b TECHNISCHE UNIVERSITÄT BERLIN   (Germany)

Author keywords

3D printing; Heart valves; Polymeric scaffolds; Rapid manufacturing; Tissue engineering

Indexed keywords

POLYMER; BIOMATERIAL;

ALLOGRAFT; BASIC RESEARCH; FEASIBILITY STUDY; HEART VALVE; HUMAN; MEDICAL DEVICE; POLYMERIZATION; PRINTING; PRIORITY JOURNAL; REVIEW; THREE DIMENSIONAL PRINTING; TISSUE ENGINEERING; TISSUE SCAFFOLD; ANIMAL; BIOPRINTING; PROCEDURES;

ANIMALS; BIOCOMPATIBLE MATERIALS; BIOPRINTING; HEART VALVES; HUMANS; POLYMERS; TISSUE ENGINEERING; TISSUE SCAFFOLDS;

EID: 84926022660     PISSN: 10107940     EISSN: 1873734X     Source Type: Journal    
DOI: 10.1093/ejcts/ezt510     Document Type: Review

References (80)

1. Pilia M, Guda T, Appleford M. Development of composite scaffolds for load-bearing segmental bone defects. Biomed Res Int 2013;2013:458253.
2. Wen Y, Wang F, Zhang W, Li Y, Yu M, Nan X et al. Application of induced pluripotent stem cells in generation of a tissue-engineered tooth-like structure. Tissue Eng Part A 2012;18:1677-85.
3. Biedermann T, Boettcher-Haberzeth S, Reichmann E. Tissue engineering of skin for wound coverage. Eur J Pediatr Surg 2013;23:375-82.
4. Fulco I, Largo RD, Miot S, Wixmerten A, Martin I, Schaefer DJ et al. Towards clinical application of tissue-engineered cartilage. Facial Plast Surg 2013;29:99-105.
5. Palmer BW, Kropp BP. Update on tissue engineering in pediatric urology. Curr Urol Rep 2013;14:327-32.
6. Zellander A, Wardlow M, Djalilian A, Zhao C, Abiade J, Cho MJ. Engineering copolymeric artificial cornea with salt porogen. Biomed Mater Res A 2014;102:1799-808.
7. Maekitie AA, Korpela J, Elomaa L, Reivonen M, Kokkari A, Malin M et al. Novel additive manufactured scaffolds for tissue engineered trachea research. Acta Tolaryngol 2013;133:412-7.
8. Tschoeke B, Flanagan TC, Koch S, Harwoko MS, Deichmann T, Ellå V et al. Tissue-engineered small-caliber vascular graft based on a novel biodegradable composite fibrin-polylactide scaffold. Tissue Eng Part A 2009; 15:1909-18.
9. Sodian R, Lueders C, Kraemer L, Kuebler W, Shakibaei M, Reichart B et al. Tissue engineering of autologous human heart valves using cryopreserved vascular umbilical cord cells. Ann Thorac Surg 2006;81:2207-16.
10. Hoerstrup SP, Kadner A, Melnitchouk S, Trojan A, Eid K, Tracy J et al. Tissue engineering of functional trileaflet heart valves from human marrow stromal cells. Circulation 2002;106:(Suppl I):I-143-50.
11. Schmidt D, Mol A, Breymann C, Achermann J, Odermatt B, Goessi M et al. Living autologous heart valves engineered from human prenatally harvested cells. Circulation 2006;114:I-125-31.
12. Flanagan TC, Cornelissen C, Koch S, Tschoeke B, Sachweh JS, Schmitz-Rode T et al. The in vitro development of autologous fibrin-based tissue-engineered heart valves through optimised dynamic conditioning. Biomaterials 2007;28:3388-97.
13. Cebotari S, Tudorache I, Ciubotaru A, Boethig D, Sarikouch S, Goerler A et al. Use of fresh decellularized allografts for pulmonary valve replacement may reduce the reoperation rate in children and young adults: early report. Circulation 2011;124(Suppl 1):115-23.
14. Dohmen PM, Ozaki S, Nitsch R, Yperman J, Flameng W, Konertz W. A tissue engineered heart valve implanted in a juvenile sheep model. Med Sci Monit 2003;9:BR137-144.
15. Schnell AM, Hoerstrup SP, Zund G, Kolb S, Sodian R, Visjager JF et al. Optimal cell source for cardiovascular tissue engineering: venous vs aortic human myofibroblasts. Thorac Cardiovasc Surg 2001;49:221-5.
16. Bader A, Steinhoff G, Strobl K, Schilling T, Brandes G, Mertsching H et al. Engineering of human vascular aortic tissue based on a xenogeneic starter matrix. Transplantation 2000;70:7-14.
17. Kim SS, Lim SH, Hong YS, Cho SW, Ryu JH, Chang BC et al. Tissue engineering of heart valves in vivo using bone marrow-derived cells. Artif Organs 2006;30:554-7.
18. Cummings CL, Gawlitta D, Nerem RM, Stegemann JP. Properties of engineered vascular constructs made from collagen, fibrin, and collagen-fibrin mixtures. Biomaterials 2004;25:3699-706.
19. Sodian R, Hoerstrup SP, Sperling JS, Martin DP, Daebritz S, Mayer JE Jr. et al. Evaluation of biodegradable, three-dimensional matrices for tissue engineering of heart valves. ASAIO J 2000;46:107-10.
20. Zund G, Ye Q, Hoerstrup SP, Schoeberlein A, Schmid AC, Grunenfelder J et al. Tissue engineering in cardiovascular surgery: MTT, a rapid and reliable quantitative method to assess the optimal human cell seeding on polymeric meshes. Eur J Cardiothorac Surg 1999;15:519-24.
21. Stock UA, Mayer JE Jr. Tissue engineering of cardiac valves on the basis of PGA/PLA co-polymers. J Long Term Eff Med Implants 2001;11:249-60. Review.
22. Alperin C, Zandstra PW, Woodhouse KA. Polyurethane films seeded with embryonic stem cell-derived cardiomyocytes for use in cardiac tissue engineering applications. Biomaterials 2005;26:7377-86.
23. Santerre JP, Woodhouse K, Laroche G, Labow RS. Understanding the biodegradation of polyurethanes: from classical implants to tissue engineering materials. Biomaterials 2005;26:7457-70.
24. Lueders C, Sodian R, Shakibaei M, Hetzer R. Short-term culture of human neonatal myofibroblasts seeded using a novel three-dimensional rotary seeding device. ASAIO J 2006;52:310-4.
25. Hollweck T, Marschmann M, Hartmann I, Akra B, Meiser B, Reichart B et al. Comparative analysis of adherence, viability, proliferation and morphology of umbilical cord tissue-derived mesenchymal stem cells seeded on different titanium-coated expanded polytetrafluoroethylene scaffolds. Biomed Mater 2010;5:065004.
26. Akra B, Abou Rahal R, Uhlig A, Haas U, Fano C, Dauner M et al. Biologicalal evaluation of non-degradable polyurethane for aortic valve tissue engineering. IFBME Proc 2009;25:5-6.
27. Brady JM, Cutright DE, Miller RA, Battistone GC, Hunsuck EE. Resorption rate, route of elimination, and ultrastructure of the implant site of polylactic acid in the abdominal wall of the rat. J Biomed Mater Res 1973;7:155-66.
28. Vainiopaeae S, Kilpikari J, Laiho J, Helevirta P, Rokkanen P, Toermaelae P. Strength and strength retention in vitro, of absorbable, self reinforced polyglycolide (PGA) rods for fracture fixation. Biomaterials 1987;8:46-8.
29. Cutright DE, Beasley JD, Perez B. Histological comparison of polylactic and poly-glycolic acid sutures. Oral Surg 1971;32:165-73.
30. Toermaela P, Vainiopaeae S, Kilpikari J, Rokkanen P. The effects of fibre reinforcement and gold plating on the flexural and tensile strength of PGA/PLA copolymer materials in vitro. Biomaterials 1987;8:42-5.
31. Miller R, Brady JM, Cutright D. Degradation rates of oral resorbable implants (polylactates and polyglycolates): rate modification with changes in PLA/PGA copolymer ratios. J Biomed Mater Res 1977;11:711-9.
32. Barrows TH. Degradable implant materials: a review of synthetic absorbable polymers and their applications. Clin Mater 1986;1:233-57.
33. Middleton JC, Tipton AJ. Synthetic biodegradable polymers as orthopaedic devices. Biomaterials 2000;21:2335-46.
34. Gilding DK, Reed AM. Biodegradable polymers for use in surgery-polyglycolic/poly(lactic acid) homo-and copolymers: 1. Polymer 1979;20:1459-64.
35. Herrmann JB, Kelly RJ, Higgins GA. Polyglycolic acid sutures. Laboratory and clinical evaluation of a new absorbable suture material. Arch Surg 1970;100:486-90.
36. Simpson DG, Bowlin GL. Tissue-engineering scaffolds: can we re-engineer mother nature? Expert Rev Med Devices 2006;3:9-15.
37. Frazza EJ, Schmitt EE. A new absorbable suture. J Biomed Mater Res Symp 1971;5:43-58.
38. Schmitt EE, Polistina RA. 'Surgical sutures', US Patent 3297033, 1967.
39. Kulkarni RK, Pani KC, Neuman C, Leonard F. Arch Surg 1966;93:839-43.
40. Ramaswamy S, Gottlieb D, Engelmayr GC Jr, Aikawa E, Schmidt DE, Gaitan-Leon DM et al. The role of organ level conditioning on the promotion of engineered heart valve tissue development in-vitro using mesenchymal stem cells. Biomaterials 2010;31:1114-25.
41. Stock UA, Mayer JE. Tissue engineering of cardiac valves on the basis of PGA/PLA Co-Polymers. J Long Term Effect Med Implants 2001;11:249-60.
42. Ramchandani M, Robinson D. In vitro release of ciprofloxacin from PLGA 50:50 implants. J Control Rel 1998;54:167-75.
43. Zilberman M, Shifrovitch Y, Aviv M, Hershkovitz M. Structured drug-eluting bioresorbable films: microstructure and release profile. J Biomater Appl 2009;23:385-406.
44. Stoll C, John T, Endres M, Rosen C, Kaps C, Kohl B et al. Extracellular matrix expression of human tenocytes in three-dimensional air-liquid and PLGA cultures compared with tendon tissue: implications for tendon tissue engineering. J Orthop Res 2010;28:1170-7.
45. Reichardt A, Arshi A, Schuster P, Polchow B, Shakibaei M, Gries T et al. Custom-made generation of three-dimensional nonwovens composed of polyglycolide or polylactide for the cardiovascular tissue engineering. J Biomat Tissue Eng 2012;2:322-9.
46. Sodian R, Lemke T, Loebe M, Hoerstrup SP. New pulsatile bioreactor for fabrication of tissue-engineered patches. Tissue Eng 2001;9:401-5.
47. Gulbins H, Dauner M, Petzold R, Goldemund A, Anderson I, Doser M et al. Development of an artificial vessel lined with human vascular cells. J Thorac Cardiovasc Surg 2004;128:372-7.
48. Akra B, Uhlig A, Haas U, Fano C, Dauner M, Lohse P et al. Perfusion Bioreactor-a new pulsatile system for the perfusion of tissue engineered cardiovascular prostheses. IFBME Proc 2009;25:7-8.
49. Sodian R, Lemke T, Fritsche C, Hoerstrup SP, Fu P, Potapov EV et al. Tissue-engineering bioreactors: a new combined cell-seeding and perfusion system for vascular tissue engineering. Tissue Eng 2002;8:863-70.
50. Polchow B, Kebbel K, Schmiedeknecht G, Reichardt A, Henrich W, Hetzer R et al. Cryopreservation of human vascular umbilical cord cells undergood manufacturing practice conditions for future cell banks. J Transl Med 2012;10:98.
51. Reichardt A, Polchow B, Shakibaei M, Henrich W, Hetzer R, Lueders C. Large scale expansion of human umbilical cord cells in a rotating bed system bioreactor for cardiovascular tissue engineering applications. Open Biomed Eng J 2013;7:50-61.
52. Gebhardt A. Understanding Additive Manufacturing: Rapid Prototyping- Rapid Tooling-Rapid Manufacturing. München: Hanser, 2012.
53. Gibson I, Rosen DW, Strucker B. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. New York, NY: Springer US, 2010.
54. Chua CK, Leong KF, Lim CS. Rapid Prototyping: Principles and Applications in Manufacturing. Singapore:World Scientific Publishing Company, 2010.
55. Kamrani AK. Rapid Prototyping: Theory and Practice. New York: Springer, 2006.
56. Hoyer J, Uhl C, Beyer C. Virtual & Rapid Prototyping: Bestandsaufnahme aktueller Produkte und deren Einsatz. Düsseldorf: VDI, 2006 (in German).
57. Schmachtenberg E, Feulner R, Rietzel D, Wendel B. Wechselwirkungen Kunststoff-Laserprozess. Zeitschrift Kunststofftechnik 2008;4:1-20 (in German).
58. Rietzel D, Kuehnlein F, Drummer D. Selektives Lasersintern von teilkristallinen Thermoplasten. RTeJournal-Forum für Rapid Technologie 2011;6: urn:nbn:de:0009-2-31138 (in German).
59. Breuniger J, Becker R, Wolf A, Rommel S, Verl A. Generative Fertigung mit Kunststoffen: Konzeption und Konstruktion für selektives Lasersintern. Heidelberg: Springer, 2013 (in German).
60. Rombouts M. Selective laser sintering/melting of iron-based powders. PhD thesis. Katholieke Universiteit Leuven, 2006.
61. Meiners W. Direktes Selektives Laser Sintern einkomponentiger metallischer Werkstoffe. PhD thesis. RWTH Aachen, 1999 (in German).
62. Wilkes JI. Selektives Laserschmelzen zur generativen Herstellung von Bauteilen aus hochfester Oxidkeramik. PhD thesis. RWTH Aachen, 2009 (in German).
63. Lipson H, Kurman M. Fabricated - The New World of 3D Printing. Indianapolis: John Wiley and Sons, 2013.
64. Anderson C Makers. The New Industrial Revolution. New York, Crown Business, 2012.
65. Faulkner-Jones A, Greenhough S, King JA, Gardner J, Courtney A, Shu W. Development of a valve-based cell printer for the formation of human embryonic stem cell spheroid aggregates. Biofabrication doi:10.1088/1758-5082/5/1/015013.
66. Hockady LA, Khang KH, Colangelo NW, Cheung PYC, Duan B, Malone E et al. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication doi: 10.1088/1758-5082/4/3/035005.
67. Melissinaki V, Gill AA, Ortega I, Vamvakaki M, Ranella A, Haycock JW et al. Direct laser writing of 3D scaffolds for neural tissue engineering applications. Biofabrication doi: 10.1088/1758-5082/3/4/045005.
68. Cuhlmann C. Gesintertes Polylactid-Polyglycolid-Copolymer als individuell dreidimensional konfigurierbares und bioresorbierbares Knochenersatzmittel. PhD thesis. WWU Münster, 2009 (in German).
69. Seitz H. Dreidimensionales Drucken von patientenindividuellem Knochenersatz. RTeJournal-Forum für Rapid Technologie 2008;5: urn:nbn:de:0009-2-15357 (in German).
70. Duan B, Cheung WL, Wang M. Optimized fabrication of Ca-P/PHBV nanocomposite scaffolds via selective laser sintering for bone tissue engineering. Biofabrication doi:10.1088/1758-5082/3/1/015001.
71. Niino T, Hamajima D, Montagne K, Oizumi S, Naruke H, Huang H et al. Laser sintering fabrication of three-dimensional tissue engineering scaffolds with a flow channel network. Biofabrication doi:10.1088/1758-5082/3/3/034104.
72. Madi M. Surface Segmentation and Shape Modification for 3D Geometric Objects: Interactive 3D Surface Manipulation. Saarbrücken: VDM, 2009.
73. Lorenz C, von Berg J. A comprehensive shape model of the heart. Med Image Anal 2006;10:657-70.
74. Zheng Y, Barbu A, Georgescu B, Scheuering M, Comaniciu D. Four-chamber heart modeling and automatic segmentation for 3-D cardiac CT volumes using marginal space learning and steerable features. IEEE Trans Med Imaging 2008;27:1668-81.
75. Blattmeier M. Strukturanalyse von lasergesinterten Schichtverbunden mit werkstoffmechanischen Methoden. Wiesbaden: Springer, 2012 (in German).
76. Yang S, Leong KF, Du Z, Chua CK. The design of scaffolds for use in tissue engineering. part II. Rapid prototyping techniques. Tissue Eng 2002;8: 1-11.
77. Schulze D. Powder and Bulk Solids: Behavior, Characterization, Storage and Flow. Heidelberg: Springer, 2009.
78. Rechtenbach A, Khalyfa A, Vogt S, Weisser J, Grimm G, Meyer W et al. Biokompatible Pulver-Binder-Systeme für das 3D-Drucken von Implantaten. RTeJournal-Forum für Rapid Technologie 2008;5: urn:nbn:de:0009-2-15227 (in German).
79. Amado A, Schmidt M, Levy G, Wegener K. Advances in SLS powder characterization. Solid Freeform Fabrication Proc 2011;22:438-52. Review.
80. Hoeges S, Meiners W. SLM von Polylactiden zur Herstellung von resorbierbaren Implantaten. RTeJournal-Forum für Rapid Technologie 2009;6: urn:nbn:de:0009-2-21535 (in German).