메뉴 건너뛰기




Volumn 3, Issue 3, 2011, Pages

Laser sintering fabrication of three-dimensional tissue engineering scaffolds with a flow channel network

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIVE MANUFACTURING TECHNOLOGY; BIODEGRADABLE PLASTICS; FLOW CHANNELS; HIGH POROSITY; HYDROPHILIZATION; INNER ORGANS; LASER SINTERING; MICRO X-RAY CT; OXYGEN PLASMA ASHING; PLASTIC SURFACES; POROGEN LEACHING; POROGENS; POROUS SCAFFOLD; RESIDUAL SALTS; SELECTIVE LASER SINTERING; SODIUM HYDROXIDES; TISSUE ENGINEERING SCAFFOLD; WATER RETENTION;

EID: 82055196936     PISSN: 17585082     EISSN: 17585090     Source Type: Journal    
DOI: 10.1088/1758-5082/3/3/034104     Document Type: Article
Times cited : (28)

References (30)
  • 2
    • 0030199526 scopus 로고    scopus 로고
    • Novel approach to fabricate porous sponge of poly(d,l-lactic-co-glycolic acid) without the use of organic solvent
    • Mooney D, Baldwin D, Suh N, Vacanti J and Langer R 1996 Novel approach to fabricate porous sponge of poly(d,l-lactic-co-glycolic acid) without the use of organic solvent Biomaterials 17 1417
    • (1996) Biomaterials , vol.17 , pp. 1417
    • Mooney, D.1    Baldwin, D.2    Suh, N.3    Vacanti, J.4    Langer, R.5
  • 4
    • 85016543400 scopus 로고
    • Fabrication of controlled release biodegradable foams by phase separation
    • Lo H, Ponticiello M and Leong K 1995 Fabrication of controlled release biodegradable foams by phase separation Tissue Eng. 1 15
    • (1995) Tissue Eng. , vol.1 , pp. 15
    • Lo, H.1    Ponticiello, M.2    Leong, K.3
  • 6
    • 0029253379 scopus 로고
    • A novel method to fabricate bioabsorbable scaffolds
    • Wang K, Thomas C, Healy K and Nuber G 1995 A novel method to fabricate bioabsorbable scaffolds Polymer 36 837
    • (1995) Polymer , vol.36 , pp. 837
    • Wang, K.1    Thomas, C.2    Healy, K.3    Nuber, G.4
  • 7
    • 0031127110 scopus 로고    scopus 로고
    • Effect of polymer foam morphology and density on kinetics of in vitro controlled release of ionized from compressed foam matrices
    • Hsu Y, Gresser J, Trantolo D, Lyons C, Gangadharam P and Wise D 1997 Effect of polymer foam morphology and density on kinetics of in vitro controlled release of ionized from compressed foam matrices J. Biomed Mater. Res. 35 107
    • (1997) J. Biomed Mater. Res. , vol.35 , pp. 107
    • Hsu, Y.1    Gresser, J.2    Trantolo, D.3    Lyons, C.4    Gangadharam, P.5    Wise, D.6
  • 8
  • 9
    • 0034672872 scopus 로고    scopus 로고
    • Scaffolds in tissue engineering bone and cartilage
    • Hutmacher D 2000 Scaffolds in tissue engineering bone and cartilage Biomaterials 21 2529
    • (2000) Biomaterials , vol.21 , pp. 2529
    • Hutmacher, D.1
  • 11
    • 3242700527 scopus 로고    scopus 로고
    • Making tissue engineering scaffolds work. Review on the application of solid freeform fabrication technology to the production of tissue engineering scaffolds
    • Sachlos E and Czernuszka J 2003 Making tissue engineering scaffolds work. Review on the application of solid freeform fabrication technology to the production of tissue engineering scaffolds Eur. Cells Matter 5 29
    • (2003) Eur. Cells Matter , vol.5 , pp. 29
    • Sachlos, E.1    Czernuszka, J.2
  • 12
    • 1042288112 scopus 로고    scopus 로고
    • Computer aided tissue engineering part I: Overview, scope, challenges
    • Sun W, Darling A, Starly B and Nam J 2004 Computer aided tissue engineering part I: overview, scope, challenges Biotechnol. Appl. Biochem. 39 29
    • (2004) Biotechnol. Appl. Biochem. , vol.39 , pp. 29
    • Sun, W.1    Darling, A.2    Starly, B.3    Nam, J.4
  • 13
    • 0036142463 scopus 로고    scopus 로고
    • Recent development on computer aided tissue engineering - A review
    • Sun W and Lal P 2002 Recent development on computer aided tissue engineering - a review Comput. Methods Programs Biomed. 67 85
    • (2002) Comput. Methods Programs Biomed. , vol.67 , pp. 85
    • Sun, W.1    Lal, P.2
  • 14
    • 14844322862 scopus 로고    scopus 로고
    • Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
    • DOI 10.1016/j.biomaterials.2004.11.057, PII S0142961204011068
    • Williams J, Adewunmi A, Schek R, Flanagan C, Krebsbach P, Feinberg S, Hollister S and Das S 2005 Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering Biomaterials 26 4817-27 (Pubitemid 40347312)
    • (2005) Biomaterials , vol.26 , Issue.23 , pp. 4817-4827
    • Williams, J.M.1    Adewunmi, A.2    Schek, R.M.3    Flanagan, C.L.4    Krebsbach, P.H.5    Feinberg, S.E.6    Hollister, S.J.7    Das, S.8
  • 15
    • 74049090389 scopus 로고    scopus 로고
    • Proposal for artificial bone formation using powder-layered manufacturing: Porous characteristics of forming bone
    • in Japanese
    • Yamazawa K, Anzai M, Yokota H, Himeno R, Suzuki H and Narahara H 2009 Proposal for artificial bone formation using powder-layered manufacturing: porous characteristics of forming bone Trans. Japan. Soc. Med. Biol. Eng 47 142 (in Japanese)
    • (2009) Trans. Japan. Soc. Med. Biol. Eng , vol.47 , pp. 142
    • Yamazawa, K.1    Anzai, M.2    Yokota, H.3    Himeno, R.4    Suzuki, H.5    Narahara, H.6
  • 16
    • 42449095610 scopus 로고    scopus 로고
    • Tissue engineering and organ structure: A vascularized approach to liver and lung
    • Hoganson D, Pryor H and Vacanti J 2008 Tissue engineering and organ structure: a vascularized approach to liver and lung Pediatr. Res. 63 520
    • (2008) Pediatr. Res. , vol.63 , pp. 520
    • Hoganson, D.1    Pryor, H.2    Vacanti, J.3
  • 18
    • 1842628888 scopus 로고    scopus 로고
    • A novel poly-l-lactic acid scaffold that possesses a macroporous structure and a branching/joining three-dimensional flow channel network: Its fabrication and application to perfusion culture of human hepatoma Hep G2 cells
    • Sakai Y, Osuka M, Hanada S, Nishiyama Y, Konishi Y and Yamashita A 2004 A novel poly-l-lactic acid scaffold that possesses a macroporous structure and a branching/joining three-dimensional flow channel network: its fabrication and application to perfusion culture of human hepatoma Hep G2 cells Mater. Sci. Eng. C 24 379
    • (2004) Mater. Sci. Eng. C , vol.24 , pp. 379
    • Sakai, Y.1    Osuka, M.2    Hanada, S.3    Nishiyama, Y.4    Konishi, Y.5    Yamashita, A.6
  • 19
    • 0037114387 scopus 로고    scopus 로고
    • Liquid acrylate-endcapped biodegradable poly(-caprolactone-co- trimethylene carbonate): II. Computer-aided stereolithographic microarchitectural surface photoconstruct
    • Matsuda T and Mizutani M 2002 Liquid acrylate-endcapped biodegradable poly(-caprolactone-co-trimethylene carbonate): II. Computer-aided stereolithographic microarchitectural surface photoconstruct J. Biomed. Mater. Res. 62 395
    • (2002) J. Biomed. Mater. Res. , vol.62 , pp. 395
    • Matsuda, T.1    Mizutani, M.2
  • 20
    • 3042565843 scopus 로고    scopus 로고
    • Ultraviolet-irradiation-based photofabrication that simultaneously produces a macroporous structure and flow channels using a photoreactive biodegradable polymer and a gas-forming azoamide compound
    • Sakai Y, Osuka M, Kozasa J, Myata F, Furukawa K and Yamashita A 2003 Ultraviolet-irradiation-based photofabrication that simultaneously produces a macroporous structure and flow channels using a photoreactive biodegradable polymer and a gas-forming azoamide compound Biochem. Eng. J. 20 163
    • (2003) Biochem. Eng. J. , vol.20 , pp. 163
    • Sakai, Y.1    Osuka, M.2    Kozasa, J.3    Myata, F.4    Furukawa, K.5    Yamashita, A.6
  • 21
    • 0032471714 scopus 로고    scopus 로고
    • Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels
    • Kim S, Utsunomiya H, Koski J, Wu B M, Cima M, Sohn J, Mukai K, Griffith L and Vacanti J 1998 Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels Ann. Surg. 228 8
    • (1998) Ann. Surg. , vol.228 , pp. 8
    • Kim, S.1    Utsunomiya, H.2    Koski, J.3    Wu, B.M.4    Cima, M.5    Sohn, J.6    Mukai, K.7    Griffith, L.8    Vacanti, J.9
  • 22
    • 21444443609 scopus 로고    scopus 로고
    • Selective laser sintering of biocompatible polymers for applications in tissue engineering
    • Tan K, Chua C, Leong K, Chea C, Gui W, Tan W and Wiria F 2005 Selective laser sintering of biocompatible polymers for applications in tissue engineering Biomed Mater. Eng. 15 113
    • (2005) Biomed Mater. Eng. , vol.15 , pp. 113
    • Tan, K.1    Chua, C.2    Leong, K.3    Chea, C.4    Gui, W.5    Tan, W.6    Wiria, F.7
  • 24
    • 34447253581 scopus 로고    scopus 로고
    • Avidin-biotin binding-based cell seeding and perfusion culture of liver-derived cells in a porous scaffold with a three-dimensional interconnected flow-channel network
    • Hunag H, Oizumi S, Kojima N, Niino T and Sakai Y 2007 Avidin-biotin binding-based cell seeding and perfusion culture of liver-derived cells in a porous scaffold with a three-dimensional interconnected flow-channel network Biomaterials 28 3815
    • (2007) Biomaterials , vol.28 , pp. 3815
    • Hunag, H.1    Oizumi, S.2    Kojima, N.3    Niino, T.4    Sakai, Y.5
  • 26
    • 0020203012 scopus 로고
    • Analysis of the moisture-related properties of hydrolyzed polyester
    • Sanders E and Zeronian S 1982 Analysis of the moisture-related properties of hydrolyzed polyester J. Appl. Polym. Sci. 27 4477
    • (1982) J. Appl. Polym. Sci. , vol.27 , pp. 4477
    • Sanders, E.1    Zeronian, S.2
  • 27
    • 0019789833 scopus 로고
    • Growth of mouse plasmacytoma cells in serum-free, hormone-supplemented medium: Procedure for the determination of hormone and growth factor requirements for cell growth
    • Murakami H, Masui H and Sato G 1981 Growth of mouse plasmacytoma cells in serum-free, hormone-supplemented medium: procedure for the determination of hormone and growth factor requirements for cell growth Anal. Biochem. 114 422
    • (1981) Anal. Biochem. , vol.114 , pp. 422
    • Murakami, H.1    Masui, H.2    Sato, G.3
  • 30
    • 33746825571 scopus 로고    scopus 로고
    • Vascularized organoid engineering by modular assembly enables blood perfusion
    • McGuigan A and Sefton M 2006 Vascularized organoid engineering by modular assembly enables blood perfusion Proc. Natl Acad. Sci. 103 11461
    • (2006) Proc. Natl Acad. Sci. , vol.103 , pp. 11461
    • McGuigan, A.1    Sefton, M.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.