Advances in SLS powder characterization

22nd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2011

Volumn , Issue , 2011, Pages 438-452

  Amado, A ^a   Schmid, M ^b   Levy, G ^b   Wegener, K ^a  

^a ETH ZURICH   (Switzerland)

^b INSPIRE AG   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

3D PRINTERS; MANUFACTURE; PARTICLE SIZE ANALYSIS;

INTRINSIC PROPERTY; POWDER BEHAVIOR; POWDER CHARACTERIZATION; POWDER FLOW; PRE-PROCESSING; PROCESSING CONDITION; SELECTIVE LASER SINTERING;

LASER HEATING;

EID: 84892184195     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (32)

1. Schmid, M. and Levy, G. (2009), "Lasersintermaterialien - Aktueller Stand und Entwicklungspotential", (eds. D. Rietzel, F. Kühnlein, D. Drummer), Fachtagung Additive Fertigung, Lehrstuhl für Kunststofftechnik, Universität Erlangen, pp. 43-55.
2. Jain, P.K., Senthilkumaran, K., Pandey, P.M. and Rao, P.V.M. (2006), "Advances in materials for powder based rapid prototyping", In Proceeding of International Conference on Recent Advances in Materials and Processing, Coimbatore, India.
3. Goodridge, R.D., Tuck, C.J. and Hague, R.J.M. (2011), "Laser Sintering of Polyamides and Other Polymers", Progress in Materials Science, In Press, Corrected Proof, Available online 17 May 2011.
4. Schmidt, M., Pohle, D., and Rechtenwald, T. (2007), "Selective Laser Sintering of PEEK", CIRP Annals - Manufacturing Technology, 56(1), pp. 205-208.
5. Schmid, M., Amado, F. and Levy, G. (2011), "iCoPP - A New Polyolefin for Additive Manufacturing (SLS)", Proceedings of the International Conference on Additive Manufacturing, Session 7, Loughborough, U.K.
6. Schultz, J.P. (2003), "Modeling Heat Transfer and Densification during Laser Sintering of Viscoelastic Polymers", Doctoral Dissertation, Virginia Polytechnic Institute and State University, Blacksburg (VA), USA.
7. Salmoria, G.V., Leite, J.L., Paggi, R.A., Lago, A., Pires, A.T.N. (2008), "Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior", Polymer Testing, 27(6), pp. 654-659.
8. Schultz, J.P., Martin, J.P., Kander, R. G. and Suchicital, C.T.A. (2000), "Selective Laser Sintering of Nylon 12-PEEK Blends Formed by Cryogenic Mechanical Alloying", Proceedings SFF Symposium, Austin (TX), USA, pp. 119-124.
9. Pfister, A. (2005), "Neue Materialsysteme für das Dreidimensionale Drucken und das Selektive Lasersintern", Doctoral Dissertation, Albert Ludwigs Universität, Freiburg, Germany.
10. Salmoria, G.V., Leite, J.L. and Paggi, R.A., (2009), "The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering", Polymer Testing, 28(7), pp. 746-751.
11. Koo, J.H., Lao, S., Ho, W., Ngyuen, K., Cheng, J., Pilato, L., Wissler, G. and Ervin, M. (2006), "Polyamide Nanocomposites for Selective Laser Sintering", Proceedings SFF Symposium, Austin (TX), USA, pp. 392-409.
12. Shi, Y., Wang, Y., Chen, J. and Huang, S. (2008), "Experimental investigation into the selective laser sintering of high-impact polystyrene", Journal of Applied Polymer Science, 108(1), pp. 535-540.
13. Gill, T. and Hon, B. (2002), "Selective Laser Sintering of SiC/Polyamide Matrix Composites", Proceedings SFF Symposium, Austin (TX), USA, pp. 538-545.
14. Hon, K.K.B., Gill, T.J. (2003), "Selective Laser Sintering of SiC/Polyamide Composites", CIRP Annals - Manufacturing Technology, 52(1), pp. 173-176.
15. Berti, G., D'Angelo, L., Gatto, A. and Iuliano, L. (2010), "Mechanical characterisation of PA-Al2O3 composites obtained by selective laser sintering", Rapid Prototyping Journal, 16(2), pp. 124-129.
16. Salmoria, G.V., Paggi, R.A., Lago, A. and Beal, V.E. (2011), "Microstructural and mechanical characterization of PA12/MWCNTs nanocomposite manufactured by selective laser sintering", Polymer Testing, 30(6), pp. 611-615.
17. Athreya, S.R., Kalaitzidou, K. and Das, S. (2010), "Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering", Materials Science and Engineering: A, 527(10-11), pp. 2637-2642.
18. Wahab, M.S., Dalgarno, K.W., Cochrane, R.F. and Hassan, S. (2009), "Development of Polymer Nanocomposites for Rapid Prototyping Process", Proceedings of the World Congress on Engineering WCE, Vol II, London, U.K.
19. Kim, J. and Creasy, T.S. (2004), "Selective laser sintering characteristics of nylon 6/clayreinforced nanocomposite", Polymer Testing, 23(6), pp. 629-636.
20. Cheng, J., Lao, S., Nguyen, K., Ho, W., Cummings, A. and Koo, J. (2005), "SLS Processing Studies of Nylon 11 Nanocomposites", Proceedings SFF Symposium, Austin (TX), USA, pp. 141-149.
21. Chunze, Y., Yusheng, S., Jinsong, Y. and Jinhui, L. (2009), "A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering", Journal of Reinforced Plastics and Composites, 28(23), pp. 2889-2902.
22. Yang, J., Shi, Y. and Yan, C. (2010), "Selective laser sintering of polyamide 12/potassium titanium whisker composites", Journal of Applied Polymer Science, 117(4), pp. 2196-2204.
23. Yan, C.Z., Shi, Y.S., Yang, J.S. and Liu, J.H. (2011) "An organically modified montmorillonite/nylon-12 composite powder for selective laser sintering", Rapid Prototyping Journal, 17(1), pp. 28-36.
24. Martin, J.P. and Kander, R.G. (2000), "Characterization of Mechanically Alloyed Polymer Blends for Selective Laser Sintering", Proceedings SFF Symposium, Austin (TX), USA, pp. 92-99.
25. Schulze, D. (2007), Powders and Bulk Solids: Behavior, Characterization, Storage and Flow, Springer, 1st Edition, Germany.
26. Evans, R. S., Bourell, D. L., Beaman, J. J. and Campbell, M.I. (2005), "SLS Materials Development Method for Rapid Manufacturing", Proceedings SFF Symposium, Austin (TX), USA, pp. 184-196.
27. Krantz, M., Zhang, H. and Zhu, J. (2009), "Characterization of powder flow: Static and dynamic testing", Powder Technology, 196(1), pp. 239-245.
28. Alscher, G. (2000), "Das Verhalten teilkristalliner Thermoplaste beim Lasersintern", Doctoral Dissertation, Universität GH, Essen, Germany.
29. Allen, M., Brown, G.J. and Miles, N.J. (1995), "Measurement of boundary fractal dimensions: review of current techniques", Powder Technology, 84, pp. 1-14.
30. Soh, J., Liew, C. and Heng, P. (2006), " New Indices to Characterize Powder Flow Based on Their Avalanching Behavior", Pharmaceutical Development and Technology, 11(1), pp. 93-102.
31. Abdullah, E.C. and Geldart, D. (1999), "The use of bulk density measurements as flowability indicators", Powder Technology, 102, pp. 151-165.
32. Abriak, N.E. and Caron, J.F. (2006), "Experimental study of shear in granular media", Advanced Powder Technology, 17(3), pp. 297-318.