Options for additive rapid prototyping methods (3D printing) in MEMS technology

Rapid Prototyping Journal

Volumn 20, Issue 5, 2014, Pages 403-412

  Lifton, Victor A ^a   Lifton, Gregory ^b   Simon, Steve ^a  

^a Pingtronics Corp   (United States)

^b RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

Additive manufacturing; Battery; Lab on a chip; MEMS; Microfabrication; Microfluidic

Indexed keywords

3D PRINTERS; CONDUCTIVE MATERIALS; ELECTROMECHANICAL DEVICES; FUSED DEPOSITION MODELING; LAB-ON-A-CHIP; LASER HEATING; MEMS; MICROANALYSIS; MICROFABRICATION; MICROFLUIDICS; RAPID PROTOTYPING; SELECTIVE LASER SINTERING; SINTERING;

BATTERY; DESIGN/METHODOLOGY/APPROACH; FUSED DEPOSITION MODELING (FDM); MANUFACTURING TECHNIQUES; MICROELECTROMECHANICAL-SYSTEMS TECHNOLOGIES; RAPID PROTOTYPING TECHNOLOGY; SELECTIVE LASER SINTERING(SLS); THREE-DIMENSIONAL (3D) PRINTING;

ADDITIVES;

EID: 84925331845     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/RPJ-04-2013-0038     Document Type: Article

References (25)

1. Bertsch, A., Jiguet, S., Bernhard, P., Renaud, P., Pique, A., Holmes, A.S. and Dimos, D.B. (2003), "Microstereolithography: a review", in Symposim on Rapid Prototyping Technologies, Vol. 758, MRS, Boston, pp. 3-15.
2. Chua, C.K., Kah Fai, L. and Lim, C.S. (2010), Rapid Prototyping: Principles and Applications, World Scientific, Singapore; Hackensack, NJ.
3. Dimitrov, D., Schreve, K. and de Beer, N. (2006), "Advances in three dimensional printing - state of the art and future perspectives", Rapid Prototyping Journal, Vol. 12 No. 3, pp. 136-147.
4. Gibson, I. (2010), Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, London, New York, NY.
5. Ho, C.C., Evans, J.W. and Wright, P.K. (2010), "Direct write dispenser printing of a zinc microbattery with an ionic liquid gel electrolyte", Journal of Micromechanics and Microengineering, Vol. 20 No. 10, p. 104009.
6. Huang, S., Peng Liu, H., Mokasdar, A. and Liang, H. (2012), "Additive manufacturing and its societal impact: a literature review", The International Journal of Advanced Manufacturing Technology, Vol. 67 Nos 5/8, pp. 1191-1203, www.springerlink.com/index/10.1007/s00170-012-4558-5 (16 October).
7. Lifton, V.A., Taylor, J.A., Vyas, B., Kolodner, P., Cirelli, R., Basavanhally, N., Papazian, A., Frahm, R., Simon, S. and Krupenkin, T. (2008), "Superhydrophobic membranes with electrically controllable permeability and their application to "smart" microbatteries", Applied Physics Letters, Vol. 93 No. 4, pp. 043112.
8. Lifton, V.A. and Simon, S. (2011), "Robust si-based membranes for fluid control in microbatteries using superlyophobic nanostructures", Journal of Microelectromechanical Systems, Vol. 20 No. 1, pp. 73-82.
9. Lifton, V.A., Simon, S., Holmqvist, J., Ebefors, T., Jansson, D. and Svedin, N. (2012), "Design and fabrication of addressable microfluidic energy storage MEMS device", Journal of Microelectromechanical Systems, Vol. 21 No. 6, pp. 1392-1401.
10. Limaye, A.S. and Rosen, D.W. (2007), "Process planning method for mask projection micro-stereolithography", Rapid Prototyping Journal, Vol. 13 No. 2, pp. 76-84.
11. McCullough, E.J. and Yadavalli, V.K. (2013), "Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices," Journal of Materials Processing Technology, Vol. 213 No. 6, pp. 947-954.
12. Madou, M. (2009), Fundamentals of Microfabrication and Nanotechnology, 3rd ed., Taylor & Francis, CRC, Boca Raton, London.
13. Malone, E., Rasa, K., Cohen, D., Isaacson, T., Lashley, H. and Hod, L. (2004), "Freeform fabrication of zinc-air batteries and electromechanical assemblies", Rapid Prototyping Journal, Vol. 10 No. 1, pp. 58-69.
14. Moore, J.L., McCuiston, A., Mittendorf, I., Ottway, R. and Johnson, R.D. (2010), "Behavior of capillary valves in centrifugal microfluidic devices prepared by three-dimensional printing", Microfluidics and Nanofluidics, Vol. 10 No. 7, pp. 877-888.
15. Narayan, R.J., Doraiswamy, A., Chrisey, D.B. and Chichkov, B.N. (2010), "Medical prototyping using two photon polymerization", Materials Today, 13 December, pp. 42-48. doi: 10.1016/S1369-7021(10)70223-6
16. Pique, A. (2001), Direct Write Technologies for Rapid Prototyping: Applications to Sensors, Electronics and Passivation Coatings, Academic, San Diego, CA, London.
17. Preechaburana, P. and Filippini, D. (2011), "Fabrication of monolithic 3D Micro-systems", Lab on a Chip, Vol. 11 No. 2, pp. 288.
18. Rosen, D.W. (2008), "Stereolithography and rapid prototyping", in Hesketh, P.J. (Ed.), BioNanoFluidic, MEMS Reference Shelf, Springer, New York, NY, http://link.springer.com/chapter/10.1007/978-0-387-46283-7-7, pp. 175-196.
19. Sollier, E., Murray, C., Maoddi, P. and Carlo, D.D. (2011), "Rapid prototyping polymers for microfluidic devices and high pressure injections", Lab Chip, Vol. 11 No. 22, pp. 3752-3765.
20. Sun, C., Fang, N., Wu, D.M. and Zhang, X. (2005), "Projection micro-stereolithography using digital micro-mirror dynamic mask", Sensors and Actuators A: Physical, Vol. 121 No. 1, pp. 113-120.
21. Vaezi, M., Seitz, H. and Yang, S. (2012), "A review on 3d micro-additive manufacturing technologies", The International Journal of Advanced Manufacturing Technology, Vol. 67 Nos 5/8, pp. 1721-1754, www.springerlink.com/ index/10.1007/s00170-012-4605-2
22. Verpoorte, E. and De Rooij, N.F. (2003), "Microfluidics meets MEMS", Proceedings of the IEEE, Vol. 91 No. 6, pp. 930-953.
23. Wang, H. (2001), "Application of fused deposition modeling rapid prototyping system to the development of microchannels", SPIE, 4590, pp. 213-220, http://link.aip.org/link/?PSI/4590/213/1&Agg=doi. doi: 10.1117/12.454606
24. Williams, K.R., Gupta, K. and Wasilik, M. (2003), "Etch rates for micromachining processing-part II", Journal of Microelectromechanical Systems, Vol. 12 No. 6, pp. 761-778.
25. Williams, K.R. and Muller, R.S. (1996), "Etch rates for micromachining processing", Journal of Microelectromechanical Systems, Vol. 5 No. 4, pp. 256-269.