Mechanics of solids and materials

Mechanics of Solids and Materials

Volumn 9780521859790, Issue , 2006, Pages 1-860

  Asaro, Robert ^a   Lubarda, Vlado ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; POLYMER BLENDS; THERMODYNAMICS;

BIOLOGICAL NETWORKS; CONTACT MECHANICS; CRYSTAL PLASTICITY; CRYSTALLINE SOLIDS; LOCALIZED PLASTIC DEFORMATION; MECHANICS OF SOLIDS; THEORETICAL FRAMEWORK; TIME-DEPENDENT DEFORMATION;

STRAIN RATE;

EID: 84925175254     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9780511755514     Document Type: Book

References (503)

1. Adkins, J. E. (1961), Large Elastic Deformations. In Progress in Solid Mechanics (R. Hill and I. N. Sneddon, eds.), Vol. 2, pp. 1–60, North-Holland, Amsterdam.
2. Aero, E. L., and Kuvshinskii, E. V. (1960), Fundamental Equations of the Theory of Elastic Media with Rotationally Interacting Particles, Fiz. Tverd. Tela, Vol. 2, pp. 1399–1409.
3. Anand, L. (1986), Moderate Deformations in Extension-Torsion of Incompressible Isotropic Elastic Materials, J. Mech. Phys. Solids, Vol. 34, pp. 293–304.
4. Anand, L., and Kothari, M. (1996), A Computational Procedure for Rate-Independent Crystal Plasticity, J. Mech. Phys. Solids, Vol. 44, pp. 525–558.
5. Antman, S. S. (1995), Nonlinear Problems of Elasticity, Springer-Verlag, New York.
6. Armstrong, P. J., and Frederick, C. O. (1966), A Mathematical Representation of the Multiaxial Bauschinger Effect, G.E.G.B. Report RD/B/N, 731.
7. Arruda, E. M., and Boyce, M. C. (1993), A Three-Dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials, J. Mech. Phys. Solids, Vol. 41, pp. 389–412.
8. Asaro, R. J. (1979), Geometrical Effects in the Inhomogeneous Deformation of Ductile Single Crystals, Acta Met., Vol. 27, pp. 445–453.
9. Asaro, R. J. (1983a), Crystal Plasticity, J. Appl. Mech., Vol. 50, pp. 921–934.
10. Asaro, R. J. (1983b), Micromechanics of Crystals and Polycrystals, Adv. Appl. Mech., Vol. 23, pp. 1–115.
11. Asaro, R. J. (1985), Rate Dependent Modeling of Polycrystals, J. Metals, Vol. 37, p. A42.
12. Asaro, R. J., and Barnett, D. M. (1974), The Non-Uniform Transformation Strain Problem for an Anisotropic Ellipsoidal Inclusion, J. Mech. Phys. Solids, Vol. 23, pp. 77–83.
13. Asaro, R. J., and Barnett, D. M. (1976), Applications of the Geometrical Theorems for Dislocations in Anisotropic Elastic Media. In Computer Simulation for Materials Applications (R. J. Arsenault, J. R. Beeler, Jr., and J. A. Simmons, eds.), p. 313, NBS, Gaithersburg, Maryland.
14. Asaro, R. J., and Hirth, J. P. (1974), Planar Dislocation Interactions in Anisotropic Media with Applications to Nodes, J. Phys. F, Vol. 3, pp. 1659–1671.
15. Asaro, R. J., Hirth, J. P., Barnett, D. M., and Lothe, J. (1973), A Further Synthesis of Sextic and Integral Theories for Dislocations and Line Forces in Anisotropic Media, Phys. Status Solidi B, Vol. 60, pp. 261–271.
16. Asaro, R. J., Krysl, P., and Kad, B. (2003), Deformation Mechanism Transitions in Nanoscale FCC Metals, Phil. Mag. Letters, Vol. 83, pp. 733–743.
17. Asaro, R. J., and Needleman, A. (1985), Texture Development and Strain Hardening in Rate Dependent Polycrystals, Acta Metall., Vol. 33, pp. 923–953.
18. Asaro, R. J., and Rice, J. R. (1977), Strain Localization in Ductile Single Crystals, J. Mech. Phys. Solids, Vol. 25, pp. 309–338.
19. Asaro, R. J., and Suresh, S. (2005), Mechanistic Models for the Activation Volume and Rate Sensitivity in Metals with Nanocrystallne Grains and Nano-Scale Twins, Acta Mater., Vol. 53, pp. 3369–3382.
20. Asaro, R. J., and Tiller, W. A. (1972), Interface Morphology Development during Stress Corrosion Cracking. Part I: Via Surface Motion, Metall. Trans., Vol. 3, pp. 1789–1796.
21. Ashby, M. F. (1971), The Deformation of Plastically Non-Homogeneous Alloys. In Strengthening Methods in Crystals (A. Kelly and R. B. Nicholson, eds.), p. 137, Appl. Science Publ., London.
22. Atkinson, C., and Leppington, F. G. (1974), Some Calculations of the Energy-Release Rate G for Cracks in Micropolar and Couple-Stress Elastic Media, Int. J. Fracture, Vol. 10, pp. 599–602.
23. Atkinson, C., and Leppington, F. G. (1977), The Effect of Couple Stresses on the Tip of A Crack, Int. J. Solids Struct., Vol. 13, pp. 1103–1122.
24. Bailey, R., and Asaro, R. J. (2004), Deformation Rate Sensitivity in Nanocrystalline Ni, UCSD Report SE-Nano-4, University of California at San Diego, La Jolla, CA.
25. Barber, J. R. (2002), Elasticity, 2nd ed., Kluwer, Dordrecht, The Netherlands.
26. Barendareght, J. A., and Sharpe, W. N., Jr. (1973), The Effect of Biaxial Loading on the Critical Resolved Shear Stress of Zinc Single Crystals, J. Mech. Phys. Solids, Vol. 21, pp. 113–123.
27. Barnett, D. M., and Asaro, R. J. (1972), The Fracture Mechanics of Slit-Like Cracks in Anistropic Elastic Media, J. Mech. Phys. Solids, Vol. 20, pp. 353–366.
28. Barnett, D. M., and Lothe, J. (1973), Synthesis of the Sextic and the Integral Formalism for Dislocation, Green's Functions and SurfaceWaves in Anisotropic Elastic Solids, Phys. Norv., Vol. 7, pp. 13–19.
29. Basinski, S. J., and Basinski, Z. S. (1979), Plastic Deformation and Work Hardening. In Dislocations in Solids: Dislocations in Metallurgy, Vol. 4 (F. R. N. Nabarro, ed.), pp. 261–362, North-Holland, Amsterdam.
30. Basinski, Z. S., and Jackson, P. I. (1965), The Instability of theWork-Hardened State – I. Slip in Extraneously Deformed Crystals, Phys. Status Solidi, Vol. 9, pp. 805–823.
31. Bassani, J. L. (1990), Single Crystal Hardening, Appl. Mech. Rev., Vol. 43, pp. S320–S327.
32. Bassani, J. L. (1993), Plastic Flow of Crystals, Adv. Appl. Mech., Vol. 30, pp. 191–258.
33. Batdorf, S. S., and Budiansky, B. (1949), A Mathematical Theory of Plasticity Based on the Concept of Slip, N.A.C.A. TN, 1871.
34. Batdorf, S. S., and Budiansky, B. (1954), Polyaxial Stress-Strain Relations of a Strain- Hardening Meter, J. Appl. Mech., Vol. 21, pp. 323–326.
35. Bazant, Z. P., and Cedolin, L. (1991), Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories, Oxford University Press, New York.
36. Beatty, M. F. (1987), Topics in Finite Elasticity: Hyperelasticity of Rubber, Elastomers, and Biological Tissues – with Examples, Appl. Mech. Rev., Vol. 40, pp. 1699–1734.
37. Beatty, M. F. (1996), Introduction to Nonlinear Elasticity. In Nonlinear Effects in Fluids and Solids (M. M. Carroll and M. A. Hayes, eds.), pp. 13–112, Plenum, New York.
38. Beevers, C. J., and Honeycombe, R. W. (1962), Deformation and Fracture of Aluminum 5.5% Copper Crystals, Acta Metall., Vol. 10, pp. 17–24.
39. Besseling, J. F., and Van der Giessen, E. (1994), Mathematical Modeling of Inelastic Deformation, Chapman & Hall, London.
40. Biot, M. A. (1965), Mechanics of Incremental Deformations, Wiley, New York.
41. Bishop, J. F.W., and Hill, R. (1951a), A Theory of the Plastic Distortion of a Polysrystalline Aggregate Under Combined Stresses, Phil. Mag., Vol. 42, pp. 414–427.
42. Bishop, J. F. W., and Hill, R. (1951b), A Theoretical Derivation of the Plastic Properties of a Polycrystalline Face-Centered Metal, Phil. Mag., Vol. 42, pp. 1298–1307.
43. Bishop, J. F. W., Hill, R., and Mott, N. F. (1945), The Theory of Indentation and Hardness Tests, Proc. Phys. Soc., Vol. 57, pp. 147–159.
44. Blatz, P. J., and Ko, W. L. (1962), Application of Finite Elasticity Theory to the Deformation of Rubbery Materials, Trans. Soc. Rheol., Vol. 6, pp. 223–251.
45. Boal, D. (2002), Mechanics of the Cell, Cambridge University Press, New York.
46. Boas, W., and Ogilvie, G. J. (1954), The Plastic Deformation of a Crystal in a Polycrystalling Aggregate, Acta Metall., Vol. 2, pp. 655–659.
47. Boehler, J. P. (1987), Application of Tensor Functions in Solid Mechanics, Springer-Verlag, Wien.
48. Boley, B. A., andWeiner, J. H. (1960), Theory of Thermal Stresses, Wiley, New York.
49. Bragg, W. H., and Bragg, W. L. (1933), The Crystalline State, Bell, London.
50. Brillouin, L. (1964), Tensors in Mechanics and Elasticity, Academic Press, New York.
51. Broek, D. (1987), Elementary Engineering Fracture Mechanics, 4th ed., Martinus Nijhoff, Dordrecht, The Netherlands.
52. Bronkhorst, C. A., Kalindindi, S. R., and Anand, L. (1992), Polycrystalline Plasticity and the Evolution of Crystallographic Texture in FCC Metals, Phil. Trans. Roy. Soc. London, Ser. A., Vol. 341, pp. 443–477.
53. Brown, J. W., and Churchill, R. V. (2001), Fourier Series and Boundary Value Problems, 6th ed., McGraw-Hill, Boston.
54. Brulin, O., and Hsieh, R. K. T., eds. (1982), Mechanics of Micropolar Media, World Scientific, Singapore.
55. Budiansky, B. (1959), AReassessment of Deformation Theories of Plasticity, J. Appl. Mech., Vol. 26, pp. 259–2664.
56. Budiansky, B., Hutchinson, J.W., and Slutsky, S. (1982), Void Growth and Collapse inViscous Solids. In Mechanics of Solids: The Rodney Hill 60th Anniversary Volume (H. G. Hopkins and M. J. Sewell, eds.), pp. 13–45, Pergamon, Oxford, UK.
57. Budiansky, B., and Rice, J.R. (1973), Conservation Laws and Energy-Release Rates, J. Appl. Mech., Vol. 40, pp. 201–203.
58. Bunge, H.-J. (1982), Texture Analysis in Materials Science – Mathematical Methods, Butterworths, London.
59. Callen, H. B. (1960), Thermodynamics, Wiley, New York.
60. Cammarata, R. C. (1994), Surface and Interface Stress Effects in Thin Films, Progress in Surface Science, Vol. 46, pp. 1–38.
61. Carlson, D. E., and Shield, R. T., eds. (1982), Finite Elasticity, Martinus Nijhoff, The Hague.
62. Carreker, R. P., and Hibbard, W. R. (1953), Tensile Deformation of High-Purity Copper as a Function of Temperature, Strain Rate, and Grain Size, Acta Metall., Vol. 1, pp. 654–655.
63. Chadwick, P. (1960), Thermoelasticity. The Dynamical Theory. In Progress in Solid Mechanics, Vol. 1 (I. N. Sneddon and R. Hill, eds.), pp. 263–328, North-Holland, Amsterdam.
64. Chadwick, P. (1974), Thermo-Mechanics of Rubberlike Materials, Phil. Trans. Roy. Soc. Lond. A, Vol. 276, pp. 371–403.
65. Chadwick, P. (1999) ContinuumMechanics: Concise Theory and Problems, Dover, NewYork.
66. Chadwick, P., and Smith, G.D. (1982), SurfaceWaves in Cubic Elastic Materials. In Mechanics of Solids: The Rodney Hill 60th Anniversary Volume (H. G. Hopkins and M. J. Sewell, eds.), pp. 47–100, Pergamon, Oxford, UK.
67. Chakrabarty, J. (1987), Theory of Plasticity, McGraw-Hill, New York.
68. Chakrabarty, J. (2000), Applied Plasticity, Springer-Verlag, New York.
69. Champion, Y., Langlois, C., Guerin-Mailly, S., Langlois, P., Bonnentien, J. L., and Hytch, M. J. (2003), Near-Perfect Elastoplasticity in Pure Nanocrystalline Copper, Science, Vol. 300, pp. 310–311.
70. Chang, Y. W., and Asaro, R. J. (1981), An Experimental Study of Shear Localization in Aluminum-Copper Single Crystals, Acta Metall., Vol. 29, pp. 241–257.
71. Chen, W. F., and Han, D. J. (1988), Plasticity for Structural Engineers, Springer-Verlag, New York.
72. Cherepanov, G. P. (1979), Mechanics of Brittle Fracture, McGraw-Hill, New York.
73. Chiem, C. Y., and Duffy, J. D. (1981), Strain Rate History Effects and Observations of Dislocation Substructure in Aluminum Single Crystals Following Dynamic Deformation, Brown University Report, MRL E-137, Providence, Rhode Island.
74. Chokshi, A. H., Rosen, A., Karch, J., and Gleiter, H. (1989), OntheValidity of the Hall-Petch Relationship in Nanocrystalline Materials, Scripta Metall., Vol. 23, pp. 1679–1684.
75. Christoffersen, J., and Hutchinson, J. W. (1979), A Class of Phenomenological Corner Theories of Plasticity, J. Mech. Phys. Solids, Vol. 27, pp. 465–487.
76. Chung, T. J. (1996), Applied Continuum Mechanics, Cambridge University Press, Cambridge.
77. Coleman, B. D., and Gurtin, M. (1967), Thermodynamics with Internal Variables, J. Chem. Phys., Vol. 47, pp. 597–613.
78. Conrad, H. (1965), In High Strength Materials (ed. V. F. Zackay), Wiley, New York.
79. Conrad, H., and Narayan, J. (2000), Onthe Grain Size Softening in Nanocrystalline Materials, Scripta Mater., Vol. 42, pp. 1025–1030.
80. Conrad, H. (2003), Grain Size Dependence of the Plastic Deformation Kinetics in Cu, Mater. Sci. Eng. A, Vol. 341, pp. 216–228.
81. Cook, R. D., and Young, W. C. (1999), Advanced Mechanics of Materials, 2nd ed., Prentice Hall, Upper Saddle River, New Jersey.
82. Cosserat, E. (1909), Théorie des Corps Deformables, Hermann, Paris.
83. Cottrell, A. H. (1961), Dislocations and Plastic Flow in Crystals, Oxford University Press, London.
84. Cottrell, A. H. (1964), The Mechanical Properties of Matter, Wiley, New York.
85. Cowin, S. C. (1990), Structural Adaptation of Bones, Appl. Mech. Rev., Vol. 43, pp. S126–S133.
86. Cowin, S. C. (2004), Tissue Growth and Remodeling, Annu. Rev. Biomed. Eng., Vol. 6, pp. 77–107.
87. Cowin, S.C., and Hegedus, D.H. (1976a), Bone Remodeling I: Theory of Adaptive Elasticity, J. of Elasticity, Vol. 6, pp. 313–326.
88. Cowin, S. C., and Hegedus, D. H. (1976b), Bone Remodeling II: Small Strain Elasticity, J. of Elasticity, Vol. 6, pp. 337–352.
89. Cristescu, N. (1967), Dynamic Plasticity, North-Holland, Amsterdam.
90. Cristescu, N., and Suliciu, I. (1982), Viscoplasticity, Martinus Nijhoff, The Hague.
91. Dafalias, Y. F. (1983), Corotational Rates for Kinematic Hardening at Large Plastic Deformations, J. Appl. Mech., Vol. 50, pp. 561–565.
92. Dafalias, Y. F., and Popov, E. P. (1975), A Model of Nonlinearly Hardening Materials for Complex Loading, Acta Mech., Vol. 21, pp. 173–192.
93. Dafalias, Y. F., and Popov, E. P. (1976), Plastic Internal Variables Formalism of Cyclic Plasticity, J. Appl. Mech., Vol. 43, pp. 645–651.
94. Dalla Torre, F., Van Swygenhoven, H., and Victoria, M. (2002), Nanocrystalline Electrodeposited Ni: Microstructure and Tensile Properties, Acta Mater., Vol. 50, pp. 3957– 3970.
95. Dao, M., and Asaro, R. J. (1993), Non-Schmid Effects and Localized Plastic-Flow in Intermetallic Alloys, Mat. Sci. Eng. A, Vol. 170, pp. 143–160.
96. Dao, M., and Asaro, R. J. (1994), Coarse Slip Bands and the Transition to Macroscopic Shear Bands, Scripta Metall., Vol. 30, pp. 791–796.
97. Dao, M., and Asaro, R. J. (1996), Localized Deformation Modes and non-Schmid Effects in Crystalline Solids. Part I: Critical Conditions for Localization, Mech. Mater., Vol. 23, pp. 71–102.
98. D’ArcyThomson, W. (1942), OnGrowth and Form, Cambridge University Press, Cambridge.
99. Datta, A. K. (2002), Biological and Bioenvironmental Heat and Mass Transfer, Marcel Dekker, New York.
100. De Borst, R., and Van der Giessen, E., eds. (1998), Material Instabilities in Solids, Wiley, Chichester, UK.
101. DeHoff, R. T. (1993), Thermodynamics in Materials Science, McGraw-Hill, New York.
102. Denbigh, K. (1981), The Principles of Chemical Equilibrium, 4th ed., Cambridge University Press, Cambridge.
103. Desai, C. S., and Siriwardane, H. J. (1984), Constitutive Laws for Engineering Materials – with Emphasis on Geological Materials, Prentice Hall, Englewood Cliffs, New Jersey.
104. Dhaliwal, R. S., and Singh, A. (1987), Micropolar Thermoelasticity. In Thermal Stresses II (R. B. Hetnarski, ed.), pp. 269–328, Elsevier, Amsterdam.
105. Dickerson, R. E. (1969), Molecular Thermodynamics, The Benjamin/Cummings Publ., Menlo Park, California.
106. Dillamore, I. L., Roberts, J.G., and Bush, A. C. (1979), Occurence of Shear Bands in Heavily Rolled Cubic Metals, Metal Sci., Vol. 13, pp. 73–77.
107. DiMaggio, F. L., and Sandler, I. S. (1971), Material Model for Granular Soils, J. Engry. Mech., ASCE, Vol. 97, pp. 935–950.
108. Doghri, I. (2000), Mechanics of Deformable Solids, Springer-Verlag, Berlin.
109. Doyle, T. C., and Ericksen, J. L. (1956), Nonlinear Elasticity, Adv. Appl. Mech., Vol. 4, pp. 53–115.
110. Drucker, D. C. (1951), A More Fundamental Approach to Plastic Stress-Strain Relations. In Proc. 1st Natl Congr. Appl. Mech. (E. Sternberg, ed.), ASME, New York, pp. 487–491.
111. Drucker, D. C. (1959), A Definition of Stable Inelastic Material, J. Appl. Mech., Vol. 26, pp. 101–106.
112. Drucker, D. C. (1960), Plasticity. In Structural Mechanics – Proc. 1st Symp. Naval Struct. Mechanics (J. N. Goodier and N. J. Hoff, eds.), Pergamon, New York, pp. 407–455.
113. Drucker, D. C., and Prager, W. (1952), Soil Mechanics and Plastic Analysis or Limit Design, Q. Appl. Math., Vol. 10, pp. 157–165.
114. Duffy, J. D. (1983), Strain Rate History Effects and Dislocation Structure. In Material Behavior under High Stress and Ultrahigh Loading Rates (J. Mescall and V. Weiss, eds.), pp. 21–37, Plenum, New York.
115. Dundurs, J. (1969), Elastic Interactions of Dislocations with Inhomogeneities. In Mathematical Theory of Dislocations (T. Mura, ed.), ASME, New York, pp. 70–115.
116. Dundurs, J., and Markenscoff, X. (1989), The Sternberg–Koiter Conclusion and other Anomalies of the Concentrated Couple, J. Appl. Mech., Vol. 56, pp. 240–245.
117. Dundurs, J., and Markenscoff, X. (1993), Invariance of Stresses under a Change in Elastic Compliances, Proc. Roy. Soc. Lond. A, Vol. 443, pp. 289–300.
118. Dundurs, J., and Mura, T. (1964), Interaction Between Edge Dislocation and a Circular Inclusion, J. Mech. Phys. Solids, Vol. 12, pp. 177–189.
119. Duszek, M. K., and Perzyna, P. (1991), On Combined Isotropic and Kinematic Hardening Effects in Plastic Flor Processes, Int. J. Plasticity, Vol. 9, pp. 351–363.
120. Ebrahimi, F., Bourne, G. R., Kelly, M. S., and Matthews, T. E. (1999), Mechanical Properties of Nanocrystalline Nickel Produced by Electrodeposition, Nanostr. Mater., Vol. 11, pp. 343–350.
121. Elam, C. F. (1926), Tensile Tests of Large Gold, Silver, and Copper Crystals, Proc. Roy. Soc. Lond., Ser. A, Vol. 112, pp. 289–294.
122. Elam, C.F. (1927a), Tensile Tests on Alloy Crystals. Part II: Solid Solution Alloys of Copper and Zinc, Proc. Roy. Soc. Lond., Ser. A, Vol. 115, pp. 148–169.
123. Elam, C. F. (1927b), Tensile Tests on Crystals. Part IV: A Copper Alloy Containing Five Per Cent Aluminum, Proc. Roy. Soc. London, Ser. A, Vol. 13, pp. 73–77.
124. Elam, C. F. (1936), The Distortion of ß-Brass and Iron Crystals, Proc. Roy. Soc. London, Ser. A, Vol. 153, pp. 273–301.
125. Elsherik, A. M., Erb, U., Palumbo, G., and Aust, K. T. (1992), Deviations from Hall-Petch Behavior in as-prepared Nanocrystalline Nickel, Scripta Metall., Vol. 27, pp. 1185–1188.
126. Embury, J. D. (1971), Strengthening by Dislocation Substructures. In Strengthening Methods in Crystals (A. Kelly and R. B. Nicholson, eds.), p. 331, Appl. Science Publ., London.
127. Ericksen, J. L. (1960), Tensor Fields. In Hanbuch der Physik (S. Flugge, ed.), Band III/1, Springer-Verlag, Berlin.
128. Ericksen, J. L. (1977), Special Topics in Elastostatics, Adv. Appl. Mech., Vol. 17, pp. 189–244.
129. Ericksen, J. L. (1991), Introduction to the Thermodynamics of Solids, Chapman and Hall, London.
130. Eringen, A. C. (1967), Mechanics of Continua, Wiley, New York.
131. Eringen, A.C. (1971), Tensor Analysis. In Continuum Physics (A.C. Eringen, ed.), Academic Press, New York.
132. Eringen, A. C. (1999), Microcontinuum Field Theories, Springer-Verlag, New York.
133. Eringen, A. C., and Suhubi, E. S. (1964), Nonlinear Theory of Simple Microelastic Solids, Int. J. Eng. Sci., Vol. 2, I: pp. 189–203, II: pp. 389–404.
134. Eshelby, J. D. (1951), The Force on an Elastic Singularity, Phil. Trans. Roy. Soc. A, Vol. 244, pp. 87–112.
135. Eshelby, J. D. (1956), The Continuum Theory of Lattice Defects. In Solid State Physics (F. Seitz and D. Turnbull, eds.), Vol. 3, Academic Press, New York, pp. 79–144.
136. Eshelby, J. D. (1957), The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. Roy. Soc. Lond. A, Vol. 241, pp. 376–396.
137. Eshelby, J.D. (1961), Elastic Inclusions and Inhomogeneities. In Progress in Solid Mechanics, Vol. 2 (I. N. Sneddon and R. Hill, eds.), pp. 87–140.
138. Eshelby, J. D. (1970), Energy Relations and the Energy-Momentum Tensor in Continuum Mechanics. In Inelastic Behavior of Solids (M. F. Kanninen, W. F. Adier, A. R. Rosenfield, and R. I. Janee, eds.), pp. 77–115, McGraw-Hul, New York.
139. Eshelby, J. D. (1975), The Elastic Energy-Momentum Tensor, J. of Elasticity, Vol. 5, pp. 321–335.
140. Eshelby, J.D., Read, W. T., and Shockley, W. (1953), Anisotropic Elasticity with Applications to Dislocation Theory, Acta Metall., Vol. 1, pp. 251–259.
141. Evans, E. A., and Skalak, R. (1980), Mechanics and Thermodynamics of Biomembranes, CRC Press, Boca Raton, Florida.
142. Ewing, J. A., and Rosenhain, W. (1899), Experiments in Micro-Metallurgy: Effects of Strain, Preliminary Notice, Proc. Roy. Soc. Lond., Vol. 65, pp. 85–90.
143. Ewing, J. A., and Rosenhain, W. (1900), The Crystalline Structure of Metals, Proc. Roy. Soc. Lond., Vol. 193, pp. 353–375.
144. Filonenko-Borodich, M. (1964), Theory of Elasticity, P. Noordhoff, Groningen, Netherlands.
145. Fischer-Cripps, A. C. (2000), Introduction to Contact Mechanics, Springer-Verlag, NewYork.
146. Fitzgerald, E. A. (1991), Dislocations in Strained-Layer Epitaxy: Theory, Experiment, and Applications, Mater. Sci. Reports, Vol. 7, pp. 87–142.
147. Fleck, N. A., and Hutchinson, J. W. (1997), Strain Gradient Plasticity, Adv. Appl. Mech., Vol. 33, pp. 295–361.
148. Follansbee, P. S., and Kocks, U. F. (1988), A Constitutive Description of the Deformation of Copper based on the Use of the Mechanical Threshold Stress as an Internal State Variable, Acta Metall., Vol. 36, pp. 81–93.
149. Follansbee, P. S., Regazzoni, G., and Kocks, U. F. (1984), Mechanical Properties of Materials at High Rates of Strain, Inst. Phys., Conf. Ser. 70, pp. 71–81.
150. Franciosi, P., Berveiller, M., and Zaoui, A. (1980), Latent Hardening in Copper and Aluminum Singel Crystals, Acta Metall., Vol. 28, pp. 273–283.
151. Franciosi, P., and Zaoui, A(1982), MultislipTests on Copper Crystals:AJunctions Hardening Effect, Acta Met., Vol. 30, pp. 2141–2151.
152. Frank, F. C., and Read, W. T., Jr. (1950), Multiplication Processes for Slow Moving Dislocations, Phys. Rev., Vol. 79, pp. 722–724.
153. Frenkel, J. (1926), Zur Theorie der Elastizit ¨atsgrenze und der Festigheit kristallinischer Körper, Z. Phys., Vol. 37, pp. 572–609.
154. Freund, L. B. (1978), Stress Intensity Factor Calculations Based on a Conservation Integral, Int. J. Solids Struct., Vol. 14, pp. 241–250.
155. Freund, L. B. (1987), The Stability of a Dislocation Threading a Strained Layer On A Substrate, J. Appl. Mech., Vol. 54, pp. 553–557.
156. Freund, L. B. (1990), The Driving Force for Glide of A Threading Dislocation in a Strained Epitaxial Layer on a Substrate, J. Mech. Phys. Solids, Vol. 38, pp. 657–679.
157. Freund, L. B. (1993), The Mechanics of Dislocations in Strained-Layer Semiconductor Materials, Adv. Appl. Mech., Vol. 30, pp. 1–66.
158. Freund, L. B. (1990), Dynamic Fracture Mechanics, Cambridge University Press, Cambridge.
159. Freund, L.B., and Suresh, S. (2003), Thin Film Materials: Stress, Defect Formation and Surface Evolution, Cambridge University Press, New York.
160. Friedel, J. (1964), Dislocations, Pergamon, New York.
161. Fung, Y.-C. (1965), Foundations of Solid Mechanics, Prentice Hall, Englewood Cliffs, New Jersey.
162. Fung, Y.-C. (1973), Biorheology of Soft Tissues, Biorheology, Vol. 10, pp. 139–155.
163. Fung, Y.-C. (1990), Biomechanics: Motion, Flow, Stress, and Growth, Springer-Verlag, New York.
164. Fung, Y.-C. (1993), Biomechanics: Mechanical Properties of Living Tissues, 2nd ed., Springer- Verlag, New York.
165. Fung, Y.-C. (1995), Stress, Strain, Growth, and Remodeling of Living Organisms, Z. Angew. Math. Phys., Vol. 46, pp. S469–S482.
166. Galin, L. A. (1961), Contact Problems in the Theory of Elasticity, School of Physical Sciences and Applied Mathematics, North Carolina State College.
167. Gao, H., and Nix, W. D. (1999), Surface Roughening of Heteroepitaxial Thin Films, Ann. Rev. Mater. Sci., Vol. 29, pp. 173–209.
168. Gaskell, D. R. (2003), Introduction to the Thermodynamics of Materials, 4th ed., Taylor & Francis, New York.
169. Gdoutos, E. E. (1990), Fracture Mechanics Criteria and Applications, Kluwer, Dordrecht, The Netherlands.
170. Gdoutos, E.E. (1993), FractureMechanics:An Introduction, Kluwer, Dordrecht, The Netherlands.
171. Germain, P., Nguyen, Q. S., and Suquet, P. (1983), Continuum Thermodynamics, J. Appl. Mech., Vol. 50, pp. 1010–1020.
172. Gertsman, V. Y., Hoffman, M., Gleiter, H., and Birringer, R. (1994), The Study of Grain-Size Dependence of Yield Stress of Copper for a Wide Grain-Size Range, Acta Metall., Vol. 42, pp. 3539–3544
173. Gladwell, G. M. L. (1980), Contact Problems in the Classical Theory of Elasticity, Alphen aan den Rijn, The Netherlands.
174. Gleiter, H. (1989), Nanocrystalline Materials, Progr. Mater. Sci., Vol. 33, pp. 223–315.
175. Goldberg, R. R. (1961), Fourier Transforms, Cambridge University Press, Cambridge, UK.
176. Gosling, T. J., Jain, S. C., Willis, J. R., Atkinson, A., and Bullough, R. (1992), Stable Configurations in Strained Epitaxial Layers, Phil. Mag. A, Vol. 66, pp. 119–132.
177. Gray G.T., et al(1997), Influence of Strain Rate&Temperature on the Mechanical Response of Ultrafine-Grained Cu, Ni, and Al-4Cu-0.5Zr, Nanostructured Materials, Vol. 9, pp. 477– 480.
178. Green, A. E., and Adkins, J. E. (1960), Large Elastic Deformations, Oxford University Press, Oxford, UK.
179. Green, A. E., and Zerna, W. (1954), Theoretical Elasticity, Oxford University Press, London.
180. Green, A. E., and Naghdi, P. M. (1965), A Dynamical Theory of Interacting Continua, Int. J. Eng., Vol. 3, pp. 231–241.
181. Grioli, G. (1960), Elasticity Asimmetrica, Ann. Mat. Pura Appl., Ser. IV, Vol. 50, pp. 389–417.
182. Günther, W. (1958), Zur Statik und Kinematik des Cosseratschen Kontinuums, Abh. Braunschw. Wiss. Ges., Vol. 10, pp. 195–213.
183. Günther, W. (1962), Uber einige Randintegrale der Elastomechanik, Abh. Braunschw.Wiss. Ges., Vol. 14, pp. 53–72.
184. Gurson, A. L. (1977), ContinuumTheory of Ductile Rapture byVoid Nucleation and Growth. Part I: Yield Criteria and Flow Rules for Porous Ductile Media, J. Eng. Mater. Tech., Vol. 99, pp. 2–15.
185. Gurtin, M. E. (1981a), Topics in Finite Elasticity, SIAM, Philadelphia.
186. Gurtin, M. E. (1981b) An Introduction to Continuum Mechanics, Academic Press, NewYork.
187. Hadamar, J. (1903), Lec¸ons Sur la Propagation des Ondes et les Equations de la L’Hydrodinamique, Hermann, Paris.
188. Haddow, J. B., and Ogden, R. W. (1990), Thermoelasticity of Rubber-like Solids at Small Strain. In Elasticity – Mathematical Methods and Applications (G. Eason and R. W. Ogden, eds.), pp. 165–179, Ellis Horwood, Chichester, UK.
189. Hall, E.O. (1951), The Deformation and Aging of Mild Steel: III. Discusion of Results, Proc. Phys. Soc. London, Sec. B, Vol. 64, pp. 747–753.
190. Han, W., and Reddy, B. D. (1999), Plasticity – Mathematical Theory and Numerical Analysis, Springer-Verlag, New York.
191. Harren, S. V. (1989), The Finite Deformation of Rate-Dependent Polycrystals – I and II, J. Mech. Phys. Solids, Vol. 39, pp. 345–383.
192. Harren, S. V., and Asaro, R. J. (1989), Nonuniform Deformation in Polycrystals and Aspects of the Validity of the Taylor Model, J. Mech. Phys. Solids, Vol. 37, pp. 191–232.
193. Harren, S. V., Deve, H. E., and Asaro, R. J. (1988), Shear Band Formation in Plane Strain Compression, Acta Metall., Vol. 36, pp. 2435–2480.
194. Harren, S. V., Lowe, T. C., Asaro, R. J., and Needlemann, A. (1989), Analysis of Large- Strain Shear in Rate-Dependent Face-Centered Cubic Polycrystals: Correlation of Microand Macromechanics, Phil. Trans. Roy. Soc. London, Ser. A, Vol. 328, pp. 442–500.
195. Haupt, P., and Kurth, J. A. (2002), Continuum Mechanics and Theory of Materials, Springer- Verlag, Wien.
196. Havner, K. S. (1971), A Discrete Model for the Prediction of Subsequent Yield Surfaces in Polycrystalling Plasticity, Int. J. Solids Struct., Vol. 7, pp. 179–730.
197. Havner, K. S. (1992), Finite Plastic Deformation of Crystalline Solids, Cambridge University Press, Cambridge, UK.
198. Head, A. K. (1953a), The Interaction of Dislocations and Boundaries, Phil. Mag., Vol. 44, pp. 92–64.
199. Head, A. K. (1953b), Edge Dislocations in Inhomogeneous Media, Proc. Phys. Soc. Lond., Vol. B66, pp. 793–801.
200. Hencky, H. (1924), Zur Theorie Plastischer Deformationen und der Hierdurch in Material Hervorgerufenen Nachspannungen, Z. Angew. Math. Mech., Vol. 4, pp. 323–334.
201. Heredia, F., and Pope, D. P. (1988), Improving the Ductility of Single Crystalline Ni3Al with Baron Additions, J. Metals, Vol. 40, p. 107.
202. Hill, R. (1948), A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proc. Roy. Soc. Lond. A, Vol. 193, pp. 281–297.
203. Hill, R. (1950), The Mathematical Theory of Plasticity, Oxford University Press, London.
204. Hill, R. (1958), A General Theory of Uniqueness and Stability in Elastic-Plastic Solids, J. Mech. Phys. Solids, Vol. 6, pp. 236–249.
205. Hill, R. (1962), AccelerationWaves in Solids, J. Mech. Phys. Solids, Vol. 10, pp. 1–16.
206. Hill, R. (1965a), Continuum Micro-Mechanics of Composite Materials, J. Mech. Phys. Solids, Vol. 13, pp. 89–101.
207. Hill, R. (1965b), A Self-Consistent Michanics of Composite Materials, J. Mech. Phys. Solids, Vol. 13, pp. 213–222.
208. Hill, R. (1967), The Essential Structures of Constitutive Laws for Metal Composites and Polycrystals, J. Mech. Phys. Solids, Vol. 15, pp. 79–95.
209. Hill, R. (1972), On Constitutive Macro-Variables for Heterogeneous Solids at Finite Strain, Proc. Roy. Soc. Lond. A, Vol. 326, pp. 131–147.
210. Hill, R. (1978), Aspects of Invariance in Solid Mechanics, Adv. Appl. Mech., Vol. 18, pp. 1–75.
211. Hill, R. (1981), Invariance Relations in Thermoelasticity with Generalized Variables, Math. Proc. Camb. Phil. Soc., Vol. 90, pp. 373–384.
212. Hill, R., and Havner, K. (1982), Perspectives in the Mechanics of Elastoplastic Crystals, J. Mech. Phys. Solids, Vol. 30, pp. 5–22.
213. Hill, R., and Hutchinson, J. W. (1975), Bifurcation Phenomena in the Plane Tension Test, J. Mech. Phys. Solids, Vol. 23, pp. 239–264.
214. Hill, R., and Rice, J. R. (1972), Constitutive Analysis of Elastic-Plastic Crystals at Arbitrary Strains, J. Mech. Phys. Solids, Vol. 20, pp. 401–413.
215. Hill, R., and Rice, J. R. (1973), Elastic Potentials and the Structure of Inelastic Constitutive Laws, SIAM J. Appl. Math., Vol. 25, pp. 448–461.
216. Hirth, J. P., and Lothe, J. (1982), Theory of Dislocations, 2nd ed., Wiley, New York.
217. Hoffman, K., and Knuze, R. (1961), Linear Algebra, Prentice Hall, Englewood Cliffs, New Jersey.
218. Hoger, A. (1987), The Stress Conjugate to the Logarithmic Strain, Int. J. Solids Struct., Vol. 23, pp. 1645–1656.
219. Holzapfel, G. A. (2000), Nonlinear Solid Mechanics, Wiley, Chichester, UK.
220. Holzapfel, G. A., Gasser, T. C., and Ogden, R. W. (2000), A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material Models, J. of Elasticity, Vol. 61, pp. 1–48.
221. Holzapfel, G. A., and Weizsacker, H. W. (1998), Biomechanical Behavior of the Arterial Wall and its Numerical Characterization, Computers in Biology and Medicine, Vol. 28, pp. 377–392.
222. Hsu, F. (1968), The Influences of Mechanical Loads on the Form of a Growing Elastic Body, Biomechanics, Vol. 1, pp. 303–311.
223. Huang, Y., Hutchinson, J. W., and Tvergaard, V. (1991), Cavitation Instabilities in Elastic- Plastic Solids, J. Mech. Phys. Solids, Vol. 39, pp. 223–241.
224. Hughes, G. D., Smith, S. D., Pande, C. S., Johnson, H. R., and Armstrong, R. W. (1986), Hall-Petch Strengthening for the Microhardness of 12 Nanometer Grain Diameter Electrodeposited Nickel, Scripta Metall., Vol. 20, pp. 93–97.
225. Hull, A. W. (1919), The Positions of Atoms in Metals, Proc. Am. Inst. Elec. Eng., Vol. 38, pp. 1171–1192.
226. Hull, D., and Bacon, D. J. (1999), Introduction to Dislocations, 3rd ed., Butterworth- Heinemann, Boston.
227. Humphrey, J. D. (1995), Mechanics of the Arterial Wall: Review and Directions, Critical Reviews in Biomed. Eng., Vol. 23, pp. 1–162.
228. Humphrey, J.D. (2002), Cardiovascular SolidMechanics: Cells, Tissues, and Organs, Springer- Verlag, New York.
229. Humphrey, J.D. (2003), ContinuumThermomechanics and the ClinicalTreatment of Disease and Injury, Appl. Mech. Rev., Vol. 56, pp. 231–260.
230. Hunter, S. C. (1983), Mechanics of Continuous Media, Ellis Horwood, Chichester, UK.
231. Hutchinson, J. W. (1964a), Plastic Stress-Strain Relations of F.C.C. Polycrystalline Metals Hardening According to Taylor Rule, J. Mech. Phys. Solids, Vol. 12, pp. 11–24.
232. Hutchinson, J.W. (1964b), Plastic Deformation of B.C.C. Polycrystals, J. Mech. Phys. Solids, Vol. 12, pp. 25–33.
233. Hutchinson, J.W. (1970), Elastic-Plastic Behavior of Polycrystalline Metals and Composites, Proc. Roy. Soc. London, Vol. A319, pp. 247–275.
234. Hutchinson, J.W. (1976), Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials, Proc. Roy. Soc. London, Vol. A319, pp. 347–272.
235. Ilyushin, A. A. (1947), Theory of Plasticity at Simple Loading of the Bodies Exhibiting Plastic Hardening, Prikl. Mat. Mekh., Vol. 11, pp. 291–296 (in Russian).
236. Ilyushin, A. A. (1961), On the Postulate of Plasticity, Prikl. Mat. Mekh., Vol. 25, pp. 503–507 (in Russian).
237. Ilyushin, A. A. (1963), Plasticity, Foundations of the Grand Mathematicl Theory, Izd. Akd. Nauk SSSR, Moscow (in Russian).
238. Indenbom, V. L., and Lothe, J. (1992), Elastic Strain Fields and Dislocation Mobility, North- Holland, Amsterdam.
239. Inui, H., Oh, M. H., Nakamura, A., and Yamaguchi, M. (1992), Room-Temperature Tensile Deformation of Polycrystalline Twinned (PST) Crystals of TiAl, Acta Metall., Vol. 40, pp. 3095–3104.
240. Iyer, R. S., Frey, C. A., Sastry, S. M. L., Waller, B. E., and Buhro, W. E. (1999), Plastic Deformation of Nanoscale Cu and Cu-Co-0.2wt%B, Mater. Sci. Eng. A, Vol. 264, pp. 210–214.
241. Jackson, P. J., and Basinski, Z. S. (1967), Latent Hardening and the Flow Stress in Copper Single Crystals, Can. J. Phys., Vol. 45, pp. 707–735.
242. Jaeger, J. C., and Cook, N. G. W. (1976), Fundamentals of Rock Mechanics, Chapman and Hall, London.
243. Jain, S. C., Gosling, T. J., Willis, J. R., Totterdell, D. H. J., and Bullough, R. (1992), A New Study of Critical Layer Thickness, Stability and Strain Relaxation in Pseudomorphic GezSi1-x Strained Epilayers, Phil. Mag. A., Vol. 65, pp. 1151–1167.
244. Jasiuk, I., and Ostoja-Starzewski, M. (1995), Planar Cosserat Elasticity of Materials with Holes and Intrusions, Appl. Mech. Rev., Vol. 48, pp. S11–S18.
245. Jauzemis, W. (1967), Continuum Mechanics, The Macmillan, New York.
246. Johnson, G. R., and Cook, W. H. (1983), A Constitutive Model and Data for Metals Subjected to Large Strain Rates, and High Temperatures. In Proceedings of the 7th International Sysposium on Ballistics, pp. 1–7, ADPA, The Hague.
247. Johnson, K. L. (1985), Contact Mechanics, Cambridge University Press, New York.
248. Johnson, W., and Mellor, P. B. (1973), Engineering Plasticity, Van Nostrand Reinhold, London.
249. Joshi, N. R., and Green, R. E., Jr. (1980), Continuous X-Ray Diffraction Measurement of Lattice Rotation during Tensile Deformation of Aluminum Crystals, J. Mat. Sci., Vol. 15, pp. 729–738.
250. Kachanov, L. M. (1971), Foundation of Theory of Plasticity, North-Holland, Amsterdam.
251. Kanninen, M. F., and Popelar, C.H. (1985), Advanced Fracture Mechanics, Oxford University Press, New York.
252. Kawabata, T., Kanai, T., and Izumi, O. (1985), PositiveTemperature-Dependence of theYield Stress in TiAl (L10) Type Superlattice Intermetallic Compound Single-Crystals at 293-1273 K, Acta Metall., Vol. 33, pp. 1355–1366.
253. Kelly, P. D. (1964), A Reacting Continuum, Int. J. Eng. Sci., Vol. 2, pp. 129–153.
254. Kelly, A., Groves, G. W., and Kidd, P. (2000), Crystallography and Crystal Defects, Wiley, New York.
255. Kelly, A., and Nicholson, R. B., eds. (1971), Strengthening Methods in Crystals, Appl. Science Publ., London.
256. Kestin, J. (1979), A Course in Thermodynamics, McGraw-Hill, New York.
257. Kestin, J., and Rice, J.R. (1970), Paradoxes in the Application ofThermodynamics to Strained Solids. In A Critical Review of Thermodynamics (E. B. Stuart, B. Gal-Or, and A. J. Brainard, eds.), pp. 275–298, Mono-Book, Baltimore.
258. Khan, A. S., and Huang, S. (1995), Continuum Theory of Plasticity, Wiley, New York.
259. Kienzler, R., and Maugin, G. A., eds. (2001), Configurational Mechanics of Materials, Sringer- Verlag, Wien.
260. Kittel, C. (1996), Introduction to Solid State Physics, 7th ed., Wiley, New York.
261. Knapp, J. A., and Follstaedt, D. M. (2004), Hall-Petch Relationship in Pulsed-Laser Deposited Nickel Films, J. Mater. Res., Vol. 19, pp. 218–227.
262. Knowles, J. K., and Sternberg, E. (1972), On a Class of Conservation Laws in Linearized and Finite Elastostatics, Arch. Ration. Mech. Anal., Vol. 44, pp. 187–211.
263. Kochend ¨ orfer, A. (1941), Reine und angewandte Metallkunde, Springer-Verlag, Berlin.
264. Kocks, U. F. (1964), Latent Hardening and Secondary Slip in Aluminum and Silver, Trans. Met. Soc., AIME, Vol. 230, pp. 1160–1167.
265. Kocks, U. F. (1970), The Relation Between Polycrystal Deformation and Single-Crystal Deformation, Metall. Trans., Vol. 1, pp. 1121–1142.
266. Kocks, U. F. (1987), Constitutive Behavior Based on Crystal Plasticity. In Unified Constitutive Equations for Creep and Plasticity (A. K. Miller, ed.), pp. 1–88, Elsevier, London.
267. Kocks, U. F., and Brown, T. J. (1966), Latent Hardening in Aluminum, Acta Metall., Vol. 14, pp. 87–98.
268. Kocks, U. F., Tomè, C. N., andWenk, H.-R. (1998), Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, UK.
269. Koehler, J. S. (1952), The Nature of Work-Hardening, Phys. Rev., Vol. 86, pp. 52–59.
270. Koiter, W. T. (1964), Couple-Stresses in the Theory of Elasticity, Proc. Ned. Akad. Wet. (B), Vol. 67, I: pp. 17–29, II: pp. 30–44.
271. Kovalenko, A. D. (1969), Thermoelasticity, Wolters–Noordhoff, Groningen, The Netherlands.
272. Krajcinovic, D. (1996), Damage Mechanics, Elsevier, New York.
273. Krausz, A. S., and Eyring, H. (1975), Deformation Kinetics, Wiley, New York.
274. Krieg, R. D. (1975), A Practical Two Surface Plascitiy Theory, J. Appl. Mech., Vol. 42, pp. 641–646.
275. Kuhlman-Wilsdorf, D. (1975), Recent Progress in Understanding of Pure Metal and Alloy Hardening. In Work Hardening in Tension and Fatigue (A.W. Thompson, ed.), p. 1, AIME, New York.
276. Kunin, I. A., and Sosnina, E. G. (1972), Ellipsoidal Inhomogeneity in an Elastic Medium, Sov. Phys. Doklady, Vol. 16, p. 534–536.
277. Kumar, K. S., Van Swygenhoven, H., and Suresh, S. (2003), Mechanical Behavior of Nanocrystalline Metals and Alloys, Acta Mater., Vol. 51, pp. 5743–5774.
278. Lai, W. M., Rubin, D., and Krempl, E. (1993), Introduction to Continuum Mechanics, Pergamon, New York.
279. Landau, L. D., and Lifshitz, E. M. (1986), Theory of Elasticity, 3rd English ed., Pergamon, New York.
280. Lee, E. H. (1969), Elastic-Plastic Deformation at Finite Strains, J. Appl. Mech., Vol. 36, pp. 1–6.
281. Legros, M., Elliott, B. R., Rittner, M. N., Weertman, J. R., and Hemker, K. J. (2000), Microsample Tensile Testing of Nanocrystalline Metals, Phil. Mag. A, Vol. 80, pp. 1017–1026.
282. Lehmann, Th., and Liang, H. Y. (1993), The Stress Conjugate to the Logarithmic Strain, Z. angnew. Math. Mech., Vol. 73, pp. 357–363.
283. Leigh, D. C. (1968), Nonlinear Continuum Mechanics, McGraw-Hill, New York.
284. Lekhnitskii, S.G. (1981), Theory of Elasticity of an Anisotropic Elastic Body, Mir Publishers, Moscow.
285. Lighthill, M. J. (1955), Introduction to Fourier Analysis and Generalized Functions, Cambridge University Press, Cambridge.
286. Lin, T. H. (1964), Slip and Stress Fields of a Polycrystalline Aggregate at Different Stages of Loading, J. Mech. Phys. Solids, Vol. 12, pp. 391–408.
287. Little, R. W. (1973), Elasticity, Prentice Hall, Englewood Cliffs, New Jersey.
288. Liu, S. Q., and Fung, Y.-C. (1988), Zero-Stress States of Arteries, J. Biomech. Eng., Vol. 110, pp. 82–84.
289. Liu, S. Q., and Fung, Y.-C. (1989), Relationaship Betwen Hypertension, Hypertrophy, and Opening Angle of Zero-Stress State of Arteries Following Aortic Constriction, J. Biomech. Eng., Vol. 111, pp. 325–335.
290. Lomer, W.M. (1951), ADislocation Reaction in the Face-Centered Cubic Lattice, Phil. Mag., Vol. 41, pp. 1327–1331.
291. Love, A. E.H. (1944), ATreatise on the Mathematical Theory of Elasticity, Dover, NewYork.
292. Lu, L., Li, S. X., and Lu, K. (2001), An Abnormal Strain Rate Effect on Tensile Behavior in Nanocrystalline Copper, Scripta Mater., Vol. 45, pp. 1163–1169.
293. Lu, L., Schwaiger, R., Shan, Z. W., Dao, M., Lu, K., and Suresh, S. (2005), Nano-Sized Twins Induce High Rate Sensitivity of Flow Stress in Pure Copper, Acta Mater., Vol. 53, pp. 2169–2179.
294. Lu, L., Shen, Y., Chen, X., and Lu, K. (2004), Ultrahigh Strength and High Electrical Conductivity in Copper, Science, Vol. 304, pp. 422–426.
295. Lubarda, V. A. (1997), Energy Analysis of Dislocation Arrays Near Bimaterial Interfaces, Int. J. Solids Struct., Vol. 34, pp. 1053–1073.
296. Lubarda, V. A. (1999), Dislocations Arrarys at the Interface between an Epitaxial Layer and Its Substrate, Math. Mech. Solids, Vol. 4, pp. 411–431.
297. Lubarda, V. A. (2002), Elastoplasticity Theory, CRC Press, Boca Raton, Florida.
298. Lubarda, V. A. (2003a), The Effects of Couple Stresses on Dislocation Strain Energy, Int. J. Solids Struct., Vol. 40, pp. 3807–3826.
299. Lubarda, V. A. (2003b), Circular Inclusions in Anti-Plane Strain Couple Stress Elasticity, Int. J. Solids Struct., Vol. 40, pp. 3827–3851.
300. Lubarda, V. A. (2004), Constitutive Theories Based on the Multiplicative Decomposition of Deformation Gradient: Thermoelasticity, Elastoplasticity and Biomechanics, Appl. Mech. Rev., Vol. 57, pp. 95–108.
301. Lubarda, V. A., and Hoger, A. (2002), On the Mechanics of Solids with A Growing Mass, Int. J. Solids Struct., Vol. 39, pp. 4627–4664.
302. Lubarda, V. A., and Lee, E. H. (1981), A Correct Definition of Elastic and Plastic Deformation and its Computational Significance, J. Appl. Mech., Vol. 48, pp. 35–40.
303. Lubarda, V. A., and Markenscoff, X. (2003), On Conservation Integrals in Micropolar Elasticity, Phil. Mag. A, Vol. 83, pp. 1365–1377.
304. Lubarda, V. A., Mastilovic, S., and Knap, J. (1996), Brittle-Ductile Transition in Porous Rocks by a Cap Model, ASCE J. Engr. Mech., Vol. 122, pp. 633–642.
305. Lubarda, V. A., and Shih, C. F. (1994), Plastic Spin and Related Issues in Phenomenological Plasticity, J. Appl. Mech., Vol. 61, pp. 524–529.
306. Lubliner, J. (1990), Plasticity Theory, Macmillan, New York.
307. Lupis, C. H. P. (1983), Chemical Thermodynamics of Materials, Prentice Hall, Englewood Cliffs, New Jersey.
308. Lurie, A. I. (1990), Nonlinear Theory of Elasticity, North-Holland, Amsterdam.
309. Ma, E. (2004), Watching the Nanograins Roll, Science, Vol. 305, pp. 623–624.
310. Malvern, L. E. (1969), Introduction to the Mechanics of a Continuous Medium, Prentice Hall, Englewood Cliffs, New Jersey.
311. Marsden, J. E., and Hughes T. J. R. (1983), Mathematical Foundations of Elasticty, Prentice Hall, Englewood Cliffs, New Jersey.
312. Marsden, J. E., and Tromba, A. J. (2003), Vector Calculus, 5th ed., W. H. Freeman and Company, New York.
313. Markenscoff, X. (1994), Some Remarks on theWedge Paradox and Saint-Venant's Principle, J. Appl. Mech., Vol. 61, pp. 519–523.
314. Martin, J. B. (1975), Plasticity: Fundamentals and General Results, MIT Press, Cambridge, Massachusetts.
315. Matthews, J.W. (1979), Misfit Dislocations. In Dislocations in Solids (F. R. N. Nabarro, ed.), Vol. 2, pp. 461–545, North-Holland, Amsterdam.
316. Matthews, J. W., and Blakeslee, A. E., (1974), Defects in Epitaxial Multilayers I. Misfit Dislocatons, J. Cryst. Growth, Vol. 27, pp. 118–125.
317. Maugin, G. A. (1992), The Thermomechanics of Plasticity and Fracture, Cambridge University Press, Cambridge.
318. Maugin, G. A. (1993), Material Inhomogeneities in Elasticity, Chapman & Hall, New York.
319. McClintock, F. A., and Argon, A. S. (1966), Mechanical Behavior of Materials, Addison- Wesley, Reading, Massachusetts.
320. McHugh, P. E., Varias, A. G., Asaro, R. J., and Shih, C. F. (1989), Computational Modeling of Microstructures, Future Generation Computer Systems, Vol. 5, pp. 295–318.
321. McLellan, A.G. (1980), The Classical Thermodynamics of Deformable Materials, Cambridge University Press, Cambridge.
322. Mear, M. E., and Hutchinson, J. W. (1985), Influence of Yield Surface Curvature on Flow Localization in Dilatant Plasticity, Mech. Mater., Vol. 4, pp. 395–407.
323. Melan, E. (1938), Zur Plastizität des räumlichen Kontinuums, Ing. Arch., Vol. 9, pp. 116–126.
324. Mindlin, R. D., (1964), Micro-Structure in Linear Elasticity, Arch. Ration. Mech. Anal., Vol. 16, pp. 51–78.
325. Mindlin, R. D., and Tiersten, H. F. (1962), Effects of Couple-Stresses in Linear Elasticity, Arch. Ration. Mech. Anal., Vol. 11, pp. 415–448.
326. Minonishi, Y. (1991), Plastic Deformation of Single-Crystals of Ti3 Al with DO19 Structure, Phil. Mag. A, Vol. 63, pp. 1085–1093.
327. Mirsky, L. (1955), An Introduction to Linear Algebra, Clarendon Press, Oxford, UK.
328. Mitchell, T. E. (1964), Dislocations and Plasticity in Single Crystals of Face-Centered Cubic Metals and Alloys. In Progress in Applied Materials Research (E. G. Stanford, J. H. Fearon, and W. J. McGonnagle, eds.), Vol. 6, pp. 119–237, A Heywood Books, London.
329. Mitchell, T. E., and Thornton, P. R. (1964), The Detection of Secondary Slip During the Deformation of Copper and a-Brass Single Crystals, Phil. Mag., Vol. 10, pp. 315– 323.
330. Mitra, R., Hoffman R. A., Madan, A., andWeertman, J. R. (2001), Effect of ProcessVariables on the Structure, Residual Stress, and Hardness of Sputtered Nanocrystalline Nickel Films, J. Mater. Res., Vol. 16, pp. 1010–1027.
331. Miura, S., and Saeki, Y. (1978), Plastic Deformation of Aluminum Bicrystals 100 Oriented, Acta Metall., Vol. 26, pp. 93–101.
332. Molinari, A. (1997), Self-Consistent Modelling of Plastic and Viscoplastic Polycrystalline Materials. In Large Plastic Deformation of Crystalline Aggregates (C. Teodosiu, ed.), pp. 173–246, Springer-Verlag, Wien.
333. Molinari, A., Ahzi, S., and Koddane, R. (1997), On the Self-Consistent Modeling of Elastic- Plastic Behavior of Polycrystals, Mech. Mater., Vol. 26, pp. 43–62.
334. Molinari, A., Canova, G. R., and Ahzi, S. (1987), A Self-Consistent Approach of the Large Deformation Polycrystal Viscoplasticity, Acta Metall., Vol. 35, pp. 2983–2994.
335. Moran, B., Ortiz, M., and Shih, C. F. (1990), Formulation of Implicit Finite Element Methods for Multiplicative Finite Deformation Plasticity, Int. J. Numer. Methods Eng., Vol. 29, pp. 483–514.
336. Mori, K., and Nakayama, Y. (1981), Shear Bands in Rolled Copper Single Crystals, Japan Inst. Metals, Vol. 22, pp. 857–864.
337. Morrison, W. B. (1966), The Effect of Grain Size on the Stress-Strain Relationship in Law- Carbon Steel, Trans. ASM, Vol. 59, p. 824–846.
338. Mróz, Z. (1967), On the Description of AnisptropicWork-Hardening, J. Mech. Phys. Solids, Vol. 15, pp. 163–175.
339. Mróz, Z. (1976), A Non-Linear Hardening Model and Its Application to Cyclic Plasticity, Acta Mech., Vol. 25, pp. 51–61.
340. Müller, I. (1985), Thermodynamics, Pitman, Boston.
341. Mura, T. (1987), Micromechanics of Defects in Solids, Martinus Nijhoff, Dordrecht, The Netherlands.
342. Murnaghan, F. D. (1951), Finite Deformation of an Elastic Solid, Wiley, New York.
343. Musgrave, M. J. P. (1970), Crystal Acoustics: Introduction to the Study of Elastic Waves and Vibrations in Crystals, Holden-day, San Francisco.
344. Muskhelishvili, N. I. (1963), Some Basic Problems of the Mathematical Theory of Elasticity, Noordhoff, Groningen, Netherlands.
345. Naghdi, P. M. (1960), Stress-Strain Relations in Placticity and Thermoplasticity. In Plascitity – Proc. 2nd Symp. Naval Struct. Mechanics (E. H. Lee and P. Symonds, eds.), pp. 121–167, Pergamon, New York.
346. Nabarro, F. R. N., ed. (1979), Dislocations in Solids, North-Holland, Amsterdam.
347. Nabarro, F. R. N. (1987), Theory of Crystal Dislocations, Dover, New York.
348. Needleman, A. (1972), Void Growth in an Elastic-Plastic Medium, J. Appl. Mech., Vol. 39, pp. 964–970.
349. Needleman, A. (1979), Non-Normality and Bifurcation in Plane Strain Tension and Compression, J. Mech. Phys. Solids, Vol. 27, pp. 231–254.
350. Needleman, A. (1989), Dynamic Shear Band Development in Plane Strain, J. Appl. Mech., Vol. 56, pp. 1–9.
351. Needleman, A., Tvergaard, V., and Hutchinson, J.W. (1992), Void Growth in Plastic Solids. In Topics in Fracture and Fatigue (A. S. Argon, ed.), pp. 145–178, Springer-Verlag, NewYork.
352. Nemat-Nasser, S. (1983), On Finite Plastic Flow of Crystalline Solids and Geomaterials, J. Appl. Mech., Vol. 50, pp. 1114–1126.
353. Nemat-Nasser, S. (2004), Plasticity: A Treatise on Finite Deformation of Heterogeneous Inelastic Materials, Cambridge University Press, New York.
354. Nemat-Nasser, S., and Hori, M. (1999), Micromechanics: Overall Properties of Heterogeneous Materials, 2nd ed., Elsevier, Amsterdam.
355. Nemat-Nasser, S., and Shokooh, A. (1980), OnFinite Plastic Flows of Compressible Materials with Internal Friction, Int. J. Solids Struct., Vol. 16, pp. 495–514.
356. Nieman, G. W., Weertman, J. R., and Siegal, R. W. (1992), Mechanical Behavior of Nanostructured Metals, Nanostructured Materials, Vol. 1, pp. 185–190.
357. Nix, W. D. (1969), Mechanical Properties of Thin Films, Metall. Trans. A, Vol. 20, pp. 2217– 2245.
358. Noda, N., Hetnarski, R. B., and Tanigawa, Y. (2003), Thermal Stresses, Taylor&Francis, New York.
359. Noether, E. (1918), Nachr. König. Gessel. Wissen, Gottingen Math. Phys. Klasse, Vol. 2, p. 235; Translated in Transport Theory and Stat. Phys., Vol. 1, p. 186, (1971).
360. Novozhilov, V. V. (1961), Theory of Elasticity, Pergamon, New York.
361. Nowacki, W. (1986), Theory of Asymmetric Elasticity, Pergamon, Oxford, UK.
362. Ogden, R. W. (1982), Elastic Deformations of Rubberlike Solids. In Mechanics of Solids: The Rodney Hill 60th Anniversary Volume (H. G. Hopkins and M. J. Sewell, eds.), pp. 499–537, Pergamon, Oxford, UK.
363. Ogden, R.W. (1984), Non-Linear Elastic Deformations, Ellis-Horwood, Chichester, UK.
364. Olver, P. J. (1986), Applications of Lie Groups to Differential Equations, Springer-Verlag, New York.
365. Orowan, E. (1934), Zur Kristallplastizität. III. Über den Mechanismus des Gleituorganges, Z. Phys., Vol. 89, pp. 634–659.
366. Orowan, E. (1963), Dislocations in Plasticity. In The Sorby Centennial Symposium on the History of Metallurgy (C. S. Smith, ed.), p. 359, Gordon and Breach, New York.
367. Ortiz, M. (1985), AConstitutive Theory for the Inelastic Behavior of Concrete, Mech. Mater., Vol. 4, pp. 67–93.
368. Paidar, V., Pope, D. P., and Vitek, V. (1984), A Theory of the Anomalous Yield Behavior in Ll2 Ordered Alloys, Acta Metall., Vol. 32, pp. 435–448.
369. Palsson, B. Ø., and Bhatia, S. N. (2004), Tissue Engineering, Pearson – Prentice Hall, Upper Saddle River, New Jersey.
370. Pan, J., and Rice, J. R. (1983), Rate Sensitivity of Plastic Flow and Implications for Yield- Surface Vertices, Int. J. Solids Struct., Vol. 19, pp. 973–987.
371. Papoulis, A. (1962), The Fourier Integral and Its Application, McGraw-Hill, New York.
372. Peach, M., andKoehler, J. S. (1950), The Forces Exerted on Dislocations and the Stress Fields Produced by Them, Phys. Rev., Vol. 80, pp. 436–439.
373. Peirce, D., Asaro, R. J., and Needleman, A. (1982), AnAnalysis of Nonuniform and Localized Deformation in Ductile Single Crystals, Acta Metall., Vol. 30, pp. 1087–1119.
374. Peirce, D., Asaro, R. J., and Needleman, A. (1983), Material Rate Dependency and Localized Deformation in Crystalline Solids, Acta Metall., Vol. 31, pp. 1951–1976.
375. Petch, N. J. (1953), The Cleavage Strength of Polycrystals, J. Iron Steel Inst., Vol. 174, pp. 25–28.
376. Piercy, G. R., Cahn, R. W., and Cottrell, A. H. (1955), A Study of Primary and Conjugate Slip in Crystals of Alpha-Brass, Acta Metall., Vol. 3, pp. 331–338.
377. Pinkus, A., and Samy, Z. (1997), Fourier Series and Integral Transforms, Cambridge University Press, New York.
378. Polanyi Von, M. (1922), Röntgenographische Bestimmung von Kristallanodnungen, Natwrwissenschaften, Vol. 10, pp. 411–416.
379. Polanyi Von, M. (1934), Über eine Art Gitterstorung, die einen Kristall Plastisch Machen Kinnte, Z. Phys., Vol. 80, pp. 660–664.
380. Prager, W. (1955), The Theory of Plasticity: A Survey of Recent Achievements, (James Clayton Lecture), Proc. Inst. Mech. Eng., Vol. 169, pp. 41–67.
381. Prager, W. (1956), A New Method of Analyzing Stresses and Strains in Work-Hardening Plastic Solids, J. Appl. Mech., Vol. 23, pp. 493–496.
382. Prager, W. (1961), Introduction to Mechanics of Continua, Ginn and Co., Boston, MA.
383. Price, R. J., andKelly, A. (1964a), Deformation of Age-Hardened Aluminum Alloy Crystals. I: Plastic Flow, Acta Metall., Vol. 12, p. 159–169.
384. Price, R. J., andKely, A. (1964b), Deformation of Age-Hardened Aluminum Alloys Crystals. II: Fracture, Acta Metall., Vol. 12, pp. 979–991.
385. Ragone, D. V. (1995), Thermodynamics of Materials, Wiley, New York.
386. Ramaswami, B., Kocks, U. F., and Chalmers, B. (1965), Latent Hardening in Silver and an Ag-Au Alloy, Trans. AIME, Vol. 233, pp. 927–931.
387. Ratner, B. D., Hoffman, A. S., Schoen, F. J., and Lemons, J. E., eds. (2004), Biomaterials Science: An Introduction to Materials in Medicine, 2nd ed., Elsevier, San Diego.
388. Reinhardt, W. D., and Dubey, R. N. (1996), Application of Objective Rates in Mechanical Modeling of Solids, J. Appl. Mech., Vol. 118, pp. 692–698.
389. Rice, J. R. (1968a), A Path Independent Integral and Approximate Analysis of Strain Concentration by Notches and Cracks, J. Appl. Mech., Vol. 38, pp. 379–386.
390. Rice, J. R. (1968b), Mathematical Analysis in the Mechanics of Fracture. In Fracture – An Advanced Treatise (H. Liebowitz, ed.), Vol. II, pp. 191–311, Academic Press, New York.
391. Rice, J. R. (1970), On the Structure of Stress-Strain Relations for Time Dependent Plastic Deformation in Metals, J. Appl. Mech., Vol. 37, pp. 728–737.
392. Rice, J. R. (1971), Inelastic Constitutive Relations for Solids: An Internal Variable Theory and Its Application to Metal Placticity, J. Mech. Phys. Solids, Vol. 19, pp. 433–455.
393. Rice, J. R. (1975), Continuum Mechanics and Thermodynamics of Plasticity in Relation to Microscale Deformation Mechanisms. In Constitutive Equations in Plasticity (A. S. Argon, ed.), pp. 23–79, MIT Press, Cambridge, MA.
394. Rice, J. R. (1977), The Localization of Plastic Deformation. In Theoretical and Applied Mechanics (W. T. Koiter, ed.), pp. 207–220, North-Holland, Amsterdam.
395. Rice, J. R. (1985), Conserved Integrals and Energetic Forces. In Fundamentals of Deformation and Fracture (B.A. Bilby, K. J. Miller, and J. R.Willis, eds.), Cambridge University Press, Cambridge.
396. Rice, J. R., and Tracey, D.M. (1969), On the Ductile Enlargement of Voids in Triaxial Stress Fields, J. Mech. Phys. Solids, Vol. 17, pp. 201–217.
397. Rivlin, R. S. (1960), Some Topics in Finite Elasticity. In Structural Mechanics (J. N. Goodier and N. Hoff, eds.), pp. 169–198, Pergamon, New York.
398. Rivlin, R. S., ed. (1977), Finite Elasticity, ASME, AMD, Vol. 27, New York.
399. Rivlin, R. S., and Sawyers, K. N. (1976), The Strain-Energy Function for Elastomers, Trans. Soc. Rheol., Vol. 20, pp. 545–557.
400. Rodrigez, E. K., Hoger, A., and McCulloch, A. D. (1994), Stress-Dependent Finite Growth in Soft Elastic Tissues, J. Biomechanics, Vol. 27, pp. 455–467.
401. Rudnicki, J. W., and Rice, J. R. (1975), Conditions for the Localization of Deformation in Pressure-Sensitive Dilatant Materials, J. Mech. Phys. Solids, Vol. 23, pp. 371–394.
402. Sachs, G. (1928), Zur Ableitung einer Fleissbedingung, Z. d. Ver. deut. Ing., Vol. 72, pp. 734–736.
403. Sacks, M. S. (2000), Biaxial Mechanical Evaluation of Planar Biological Materials, J. of Elasticity, Vol. 61, pp. 199–246.
404. Saiomoto, S., Hasford, W. F., and Backofen, W. A. (1965), Ductile Fracture in Copper Single Crystals, Phil. Mag., Vol. 12, pp. 319–333.
405. Salencon, J. (1977), Application of the Theory of Plasticity in Soil Mechanics, Wiley, Chichester, UK.
406. Sanders, J. L. (1955), Plastic Stress-Strain Relations Based on Infinitely Many Plane Loading Surfaces. In Proc. 2nd U.S. Nat. Congr. Appl. Mech. (P.M. Naghdi, ed.), pp. 445–460, ASME, New York.
407. Sanders, P. G., Eastman, J. A., and Weertman, J. R. (1997), Elastic and Tensile Behavior of Nanocrystalline Copper and Palladium, Acta Mater., Vol. 45, pp. 4019–4025.
408. Schiotz, J., Di Tolla, F. D., and Jacobsen, K. W. (1998), Softening of Nanocrystalline Metals at Very Small Grain Sizes, Nature, Vol. 391, pp. 561–563.
409. Schmid, E. (1924), Neuere Untersuchungen an Metallkristallen. In Proc. 1st Intl. Cong. Appl. Mech. (C. B. Biezeno and J. M. Burgers, eds.), Delft, Waltman, pp. 342–353.
410. Schmid, E. (1926), Ueber dis Schubverfestingung von Einkristallen bei Plasticher Deformation, Z. Phys., Vol. 40, pp. 54–74.
411. Schmid, E., and Boas, W. (1968), Plasticity of Crystals, Chapman and Hall, London.
412. Schoenfield, S. E., Ahzi, S., and Asaro, R. J. (1995), Elastic-Plastic Crystal Mechanics for Low Symmetry Crystals, J. Mech. Phys. Solids, Vol. 43, pp. 415–446.
413. Schuh, C. A., Nieh, T. G., and Yamasaki, T. (2002), Hall-Petch Breakdown Manifested in AbrasiveWear Resistance of Nanocrystalline Nickel, Scripta Mater., Vol. 46, pp. 735–740.
414. Schwaiger, R., Moser, B., Chollacoop, N., Dao, M., and Suresh, S. (2003), Some Critical Experiments on the Strain-Rate Sensitivity of Nanocrystalline Nickel, Acta Mater., Vol. 51, pp. 5159–5172.
415. Sedov, L. I. (1966), Foundations of the Non-Linear Mechanics of Continua, Pergamon, Oxford, UK.
416. Sewell, M. J. (1987), Maximum and Minimum Principles – A Unified Approach with Applications, Cambridge University Press, Cambridge.
417. Shames, I. H., and Cozzarelli, F. A. (1997), Elastic and Inelastic Stress Analysis, Taylor & Francis, London.
418. Shapery, R. A. (1968), On a Thermodynamic Constitutive Theory and Its Application to Various Nonlinear Materials. In Irreversible Aspects of Continuum Mechanics (H. Parkus and L. I. Sedov, eds.), pp. 259–285, Springer-Verlag, Berlin.
419. Skalak, R., Dasgupta, G., Moss, M., Otten, E., Dullemeijer, P., and Vilmann, H. (1982), Analytical Description of Growth, J. Theor. Biol., Vol. 94, pp. 555–577.
420. Simo, J. C., and Hughes, T. J. R. (1998), Computational Inelasticity, Springer-Verlag, New York.
421. Sneddon, I. N. (1951), Fourier Transforms, McGraw-Hill, New York.
422. Sneddon, I. N. (1961), Fourier Series, Routledge and Paul, London.
423. Sneddon, I. N. (1972), The Use of Integral Transforms, McGraw-Hill, New York.
424. Sneddon, I.N. (1974), The Linear Theory of Thermoelasticity, CISM Udine, Springer–Verlag, Wien.
425. Sokolnikoff, I. S. (1956), Mathematical Theory of Elasticity, 2nd ed., McGraw-Hill, NewYork.
426. Spencer, A. J. M. (1971), Theory of Invariants. In Continuum Physics (A. C. Eringen, ed.), Vol. 1, Academic Press, New York.
427. Spencer, A. J. M. (1992), Continuum Mechanics, Longman Scientific & Technical, London.
428. Spitzig, W. A., Sober, R. J., and Richmond, O. (1975), Pressure Dependence of Yielding and Associated Volume Expansion in Tempered Martensite, Acta Metall., Vol. 23, pp. 885–893.
429. Stojanovic´, R. (1970), Recent Developments in the Theory of Polar Continua, CISM Lecture Notes, Springer-Verlag, Wien.
430. Stören, S., and Rice, J. R. (1975), Localized Necking in Thin Sheets, J. Mech. Phys. Solids, Vol. 23, pp. 421–441.
431. Stroh, A. N. (1958), Dislocations and Cracks in Anisotropic Elasticity, Phil Mag., Vol. 3, pp. 625–646.
432. Suo, Z. (1997), Motions of Microscopic Surfaces in Materials, Adv. Appl. Mech., Vol. 33, pp. 193–294.
433. Suresh, S. (2003), The Golden Jubilee Issue – Selected Topics in Materials Science and Engineering: Past, Present and Future – Preface, Acta Mater., Vol. 51, p. 5647.
434. Suresh, S., Giannakopoulos, A. E., and Alcala, J. (1997), Spherical Indentation of Compositionally Graded Materials: Theory and Experiments, Acta Mater., Vol. 45, pp. 1307–1321.
435. Swalin, R. A. (1972), Thermodynamics of Solids, Wiley, New York.
436. Swearengen, J. C., and Taggart, R. (1971), Low Amplitude Cyclic Deformation and Crack Nucleation in Copper and Copper-Aluminum Bicrystals, Acta Metall., Vol. 19, pp. 543–559.
437. Synge, J. L., and Schild, A. (1949), Tensor Calculus, University Press, Toronto.
438. Szilard, R. (2004), Theories and Applications of Plate Analysis: Classical, Numerical, and Engineering Methods, Wiley, Hoboken, New Jersey.
439. Taber, L.A. (1995), Biomechanics of Growth, Remodeling, and Morphogenesis, Appl. Mech. Rev., Vol. 48, pp. 487–545.
440. Taber, L. A. (2004), Nonlinear Theory of Elasticity – Application to Biomechanics, World Scientific, New Jersey.
441. Taber, L. A., and Eggers, D. W. (1996), Theoretical Study of Stress-Modulated Growth in the Aorta, J. Theor. Biol., Vol. 180, pp. 343–357.
442. Taber, L. A., and Perucchio, R. (2000), Modeling Heart Development, J. Elasticity, Vol. 61, pp. 165–197.
443. Takeuchi, S., and Kuramoto, E. (1973), Temperature and Orientation Dependence of Yield Stress in Ni3Ga Single-Crystals, Acta Metall., Vol. 21, pp. 415–425.
444. Taylor, G. I. (1926), The Distortion of Single Crystals of Metals. In Proc. 2nd Intl. Cong. Appl. Mech. (E. Meissner, ed.), pp. 46–52, Orell Füssli, Zurich.
445. Taylor, G. I. (1927), The Distortion of Crystals of Aluminum Under Compression. Part II: Distortion by Double Slipping and Changes in Orientation of Crystal Axes During Compression, Proc. Roy. Soc. London, Vol. A116, pp. 16–38.
446. Taylor, G. I. (1927), The Distortion of Crystals of Aluminum Under Compression. Part III: Measurements of Stress, Proc. Roy. Soc. London, Sec A, Vol. 116, pp. 39–60.
447. Taylor, G. I. (1934), The Mechanism of Plastic Deformation of Crystals. Part I: Theoretical, Proc. Roy. Soc. London, Sec. A, Vol. 145, pp. 362–387.
448. Taylor, G. I. (1938a), Pleastic Strain in Metals, J. Inst. Met., Vol. 62, pp. 307–325.
449. Taylor, G. I. (1938b), Analysis of Plastic Strain in a Cubic Crystal. In Stephen Timoshenko 60th Anniversary Volume (J. M. Lessels, ed.), McMillian, New York.
450. Taylor, G. I., and Elam, C. F. (1923), The Distortion of an Aluminum Crystal During a Tensile Test, Proc. Roy. Soc. London, Sec. A, Vol. 102, pp. 634–667.
451. Taylor, G. I., and Elam, C. F. (1925), The Plastic Extension and Fracture of Aluminum Crystals, Proc. Roy. Soc. London, Sec. A, Vol. 108, pp. 28–51.
452. Taylor, G. I., and Quinney, H. (1931), The Plastic Distortion of Metals, Phil. Trans. Roy. Soc. A, Vol. 230, pp. 232–262.
453. Temam, R. (1985), Mathematical Problems in Plasticity, Gauthier-Villars, Paris.
454. Teodosiu, C. (1982), Elastic Models of Crystal Defects, Springer-Verlag, Berlin.
455. Thompson, A.W. (1975), Polycrystal Hardening. InWork Hardening in Tension and Fatigue (A. W. Thompson, ed.), p. 89, AIME, New York.
456. Thompson, A.W., and Baskes, M. I. (1973), The Influence of Grain Size on theWork Hardening of Face-Centered-Cubic Polycrystals, Phil. Mag., Vol. 28, pp. 301–308.
457. Timoshenko, S. P., and Goodier, J.N. (1970), Theory of Elasticity, 3rd ed., McGraw-Hill, New York.
458. Timoshenko, S. P., and Woinowsky-Krieger, S. (1987), Theory of Plates and Shells, 2nd ed., McGraw-Hill, New York.
459. Timpe, A. (1905), Probleme der Spannungsverteilung in ebenen Systemen einfach gelost mit Hilfe der airyschen Funktion, Göttingen Disseration, Leipzig.
460. Ting, T. C. T. (1991), The Stroh Formalism and Certain Invariances in Two-Dimensional Anisotropic Elasticity. In Modern Theory of Anisotropic Elasticity and Applications (J. J. Wu, T. C. T. Ting, and D. M. Barnett, eds.), SIAM, Philadelphia.
461. Ting, T. C. T. (1996), Anisotropic Elasticity: Theory and Applications, Oxford University Press, New York.
462. Toupin, R. A. (1962), Perfectly Elastic Materials with Couple Stresses, Arch. Ration. Mech. Anal., Vol. 11, pp. 385–414.
463. Treloar, L. R. G. (1975), The Physics of Rubber Elasticity, Clarendon Press, Oxford, UK.
464. Triantafyllidis, N. (1980), Bifurcation Phenomena in Pure Bending, J. Mech. Phys. Solids, Vol. 28, pp. 221–245.
465. Triantafyllidis, N. (1983), On the Bifurcation and Postbifurcation Analysis of Elastic-Plastic Solids under General Prebifurcation Conditions, J. Mech. Phys. Solids, Vol. 31, pp. 499–510.
466. Truesdell, C. (1985), The Elements of Continuum Mechanics, Springer-Verlag, New York.
467. Truesdell, C., and Noll, W. (1965), The Non-Linear FieldTheories of Mechanics. In Handbuch der Physik (S. Flugge, ed.), Band III/3, Springer-Verlag, Berlin.
468. Truesdell, C., and Toupin, R. (1960), The Classical Field Theories. In Handbuch der Physik (S. Flu¨ gge, ed.), Band III/l, Springer-Verlag, Berlin.
469. Tvergaard, V. (1982), On Locatization in Ductile Metarials Containing Spherical Voids, Int. J. Fracture, Vol. 18, pp. 237–252.
470. Tvergaard, V., and Needleman, A. (1984), Analysis of the Cup-Cone Fracture in a Round Tensile Bar, Acta Metall., Vol. 32, pp. 157–169.
471. Ugural, A. C. (1999), Stresses in Plates and Shells, 2nd ed., McGraw-Hill, Boston.
472. Ugural, A. C., and Fenster, S. K. (2003), Advanced Strength and Applied Elasticity, 4th ed., Prentice Hall, Upper Saddle River, New Jersey.
473. Valanis, K. C., and Landel, R. F. (1967), The Strain-Engery Function of a Hyperelastic Material in Terms of the Extension Ratios, J. Appl. Phys., Vol. 38, pp. 2997–3002.
474. Valiev, R. Z., Alexandrov, I. V., Zhu, Y. T., and Lowe, T. L. C. (2002), Paradox of Strength and Ductility in Metals Processed by Severe Plastic Deformation, J. Mater. Res., Vol. 17, pp. 5–8.
475. Van der Merwe, J.H. (1991), Strain Relaxation in Epitaxial Overlayers, J. Electr. Mat., Vol. 20, pp. 793–803.
476. Van Swygenhoven, H. (2003), Plastic Deformation in Metals with Nanosized Grains: Atomistic Simulations and Experiments, Mater. Sci. Forum, Vol. 447, pp. 3–10.
477. Van Swygenhoven, H., Caro, A., and Farkas, D. (2001), Grain Boundary Structure and its Influence on Plastic Deformation of Polycrystalline FCC Metals at the Nanoscale:AMolecular Dynamics Study, Scripta Mater., Vol. 44, pp. 1513–1516.
478. Van Swygenhoven, H., Derlet, P. M., and Hasnaoui, A. (2002), Atomic Mechanism for Dislocation Emission from Nanosized Grain Boundaries, Phys. Rev. B, Vol. 66, Art. No. 024101.
479. Van Vliet, K. J., Tsikata, E., and Suresh, S. (2003), Model Experiments for Direct Visualization of Grain Boundary Deformation in Nanostructured Metals, Appl. Phys. Lett., Vol. 83, pp. 1441–1443.
480. Voigt, W. (1887), Theoritiscke Studien ¨ uber die Elastizitatsverh ¨ altnisse der Krystalle, Abhandl. Ges. Wiss. Gottingen, Vol. 34, pp. 3–51.
481. Volterra, V. (1907), Sur l’Èquilibre des Corps Èlastiques Multiplement Convexes, Ann. Ec. Norm., Ser. 3, Vol. 24, pp. 401–517.
482. Wang, C.-C., and Truesdell, C. (1973), Introduction to Rational Elasticity, Noordhoff, Leyden, The Netherlands.
483. Wang, Y. M., Ma, E., and Chen, M.W. (2002), Enhanced Tensile Ductility and Toughness in Nanostructured Cu, Appl. Phys. Lett., Vol. 80, pp. 2395–2397.
484. Wang, Y. M., and Ma, E. (2003), Temperature and Strain Rate Effects on the Strength and Ductility of Nanostructured Copper, Appl. Phys. Lett., Vol. 83, pp. 3165–3167.
485. Wang, Y. M., and Ma, E. (2004), Strain Hardening, Strain Rate Sensitivity, and Ductility of Nanostructured Metals, Mater. Sci. Eng. A, Vol. 375-77, pp. 46–52.
486. Wasilewski, R. J., Butler, S. R., and Hanlon, J. E. (1967), Plastic Deformation of Single-Crystal NiAl, Trans. Metall. Soc. AIME, Vol. 239, p. 1357.
487. Watson, G. N. (1995), A Treatise on the Theory of Bessel Punctiohs, 2nd ed., Cambridge University Press, Cambridge.
488. Wei, Q., Cheng, S., Ramesh, K. T., and Ma, E. (2004), Effect of Nanocrystalline and Ultrafine Grain Sizes on the Strain Rate Sensitivity and Activation Volume: FCC versus BCC Metals, Mater. Sci. Eng. A, Vol. 381, pp. 71–79.
489. Williams, F.A. (1985) Combustion Theory – The Fundamental Theory of Chemically Reacting Flow Systems, 2nd ed., Addison-Wesley, New York.
490. Willis, J.R. (1964), Anisotropic Inclusion Problems, Q. J. Mech. Appl. Math., Vol. 17, pp. 157– 174.
491. Willis, J. R., Jain, S. C., and Bullough, R. (1990), The Energy of an Array of Dislocations: Implications for Strain Relaxation in Semiconductor Heterostructures, Phil. Mag., Vol. 62, pp. 115–129.
492. Willis, J. R., Jain, S. C., and Bullough, R. (1991), The Energy of an Array of Dislocations II: Consideration of a Capped Expitaxial Layer, Phil. Mag., Vol. 64, pp. 629–640.
493. Wolf, K. B. (1979), Integral Transforms in Science and Engineering, Plenum, New York.
494. Worthington, P. J., and Smith, E. (1964), The Formation of Slip Bands in Polycrystalline 3% Silicon Iron in the Pre-Yield Microstrain Region, Acta Metall., Vol. 12, pp. 1277–1281.
495. Wrede, R. C. (1972), Introduction to Vector and Tensor Analysis, Dover Pub., New York.
496. Wu, J. J., Ting, T. C. T., and Barnett, D. M., eds. (1991), Modern Theory of Anisotropic Elasticity and Applications, SIAM, Philadelphia.
497. Xia, Z. C., and Hutchinson, J. W. (1996), Crack Tip Fields in Strain Gradient Plasticity, J. Mech. Phys. Solids, Vol. 44, pp. 1621–1648.
498. Yamakov, V., Wolf, D., Phillpot, S. R., and Gleiter, H. (2002), Grain Boundary Diffusion Creep in Nanocrystalline Palladium by Molecular Dynamics Simulation, Acta Mater., Vol. 50, pp. 61–73.
499. Yang, W., and Lee, W. B. (1993), Mesoplasticity and Its Applications, Springer-Verlag, Berlin.
500. Youssef, K. M., Scattergood, R. O., Murty, K. L., and Koch, C. C. (2004), Ultratough Nanocrystalline Copper with a Narrow Grain Size Distribution, Appl. Phys. Lett., Vol. 85, pp. 929–931.
501. Ziegler, H. (1959), A Modicification of Prager's Hardening Rule, Q. Appl. Math., Vol. 17, pp. 55–65.
502. Ziegler, H. (1983), An Introduction to Thermomechanics, 2nd revised ed., North-Holland, Amsterdam.
503. Zyczkowski, M.(1981), Combined Loadings in the Theory of Plasticity, PWN, Polish Scientific Publishers, Warszawa.