Alternating force based drop-on-demand microdroplet formation and three-dimensional deposition

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 137, Issue 3, 2015, Pages

  Zhao, Long ^a,b,c   Yan, Karen Chang ^d   Yao, Rui ^a,b,c   Lin, Feng ^a,b,c   Sun, Wei ^a,b,c,e  

^a TSINGHUA UNIVERSITY   (China)

^b Biomanufacturing and Rapid Forming Technology Key Laboratory of Beijing   (China)

^c BEIJING UNIVERSITY OF POSTS AND TELECOMMUNICATIONS   (China)

^d The College of New Jersey   (United States)

^e Drexel University   (United States)

Author keywords

3D printing; Alternating viscous and inertial force; Cell printing; Drop on demand; Microdroplet

Indexed keywords

3D PRINTERS; CELL ENGINEERING; CELLS; CYTOLOGY; DEPOSITION; DROP FORMATION; DROPS; NOZZLES; PRINTING; TISSUE ENGINEERING;

3-D PRINTING; CELL PRINTING; DROP-ON DEMAND; INERTIAL FORCES; MICRO DROPLETS;

THREE DIMENSIONAL COMPUTER GRAPHICS;

EID: 84924404565     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4029803     Document Type: Article

References (49)

1. Sweet, R. G., 1965, "High Frequency Recording With Electrostatically Deflected Ink Jets," Rev. Sci. Instrum., 36 (2), pp. 131-136.
2. Ben-Tzvi, P., and Rone, W., 2010, "Microdroplet Generation in Gaseous and Liquid Environments," Microsyst. Technol., 16(3), pp. 333-356.
3. Wijshoff, H., 2010, "The Dynamics of the Piezo Inkjet Printhead Operation,"Phys. Rep., 491(4-5), pp. 77-177.
4. Phamduy, T. B., Raof, N. A., Schiele, N. R., Yan, Z., Corr, D. T., Huang, Y., Xie, Y., and Chrisey, D. B., 2012, "Laser Direct-Write of Single Microbeads Into Spatially-Ordered Patterns," Biofabrication, 4(2), p. 025006.
5. Beyer, C., 2014, "Strategic Implications of Current Trends in Additive Manufacturing,"ASME J. Manuf. Sci. Eng., 136(6), p. 064701.
6. Ming, F., Chandra, S., and Park, C. B., 2008, "Building Three-Dimensional Objects by Deposition of Molten Metal Droplets," Rapid Prototyping J., 14(1), pp. 44-52.
7. Chao, Y., Qi, L., Xiao, Y., Luo, J., and Zhou, J., 2012, "Manufacturing of Micro Thin-Walled Metal Parts by Micro-Droplet Deposition," J. Mater. Process. Technol., 212(2), pp. 484-491.
8. Tapia, G., and Elwany, A., 2014, "A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing," ASME J. Manuf. Sci. Eng., 136(6), p. 060801.
9. Denlinger, E. R., Irwin, J., and Michaleris, P., 2014, "Thermomechanical Modeling of Additive Manufacturing Large Parts," ASME J. Manuf. Sci. Eng., 136(6), p. 061007.
10. Luo, J., Pan, H., and Kinzel, E. C., 2014, "Additive Manufacturing of Glass,"ASME J. Manuf. Sci. Eng., 136(6), p. 061024.
11. Dijksman, J. F., Duineveld, P. C., Hack, M. J. J., Pierik, A., Rensen, J., Rubingh, J. E., Schram, I., and Vernhout, M. M., 2007, "Precision Ink Jet Printing of Polymer Light Emitting Displays," J. Mater. Chem., 17(6), pp. 511-522.
12. Tseng, H.-Y., and Subramanian, V., 2011, "All Inkjet-Printed, Fully Self-Aligned Transistors for Low-Cost Circuit Applications," Org. Electron., 12 (2), pp. 249-256.
13. Arrabito, G., and Pignataro, B., 2010, "Inkjet Printing Methodologies for Drug Screening," Anal. Chem., 82(8), pp. 3104-3107.
14. Xu, F., Celli, J., Rizvi, I., Moon, S., Hasan, T., and Demirci, U., 2011, "A Three-Dimensional In Vitro Ovarian Cancer Coculture Model Using a High-Throughput Cell Patterning Platform," Biotechnol. J., 6(2), pp. 204-212.
15. Boland, T., Xu, T., Damon, B., and Cui, X., 2006, "Application of Inkjet Printing to Tissue Engineering," Biotechnol. J., 1(9), pp. 910-917.
16. Arai, K., Iwanaga, S., Toda, H., Genci, C., Nishiyama, Y., and Nakamura, M., 2011, "Three-Dimensional Inkjet Biofabrication Based on Designed Images,"Biofabrication, 3(3), p. 034113.
17. Yu, Y., Zhang, Y., and Ozbolat, I. T., 2014, "A Hybrid Bioprinting Approach for Scale-Up Tissue Fabrication," ASME J. Manuf. Sci. Eng., 136(6), p. 061013.
18. Xu, C., Zhang, Z., Christensen, K., Huang, Y., Fu, J., and Markwald, R. R., 2014, "Freeform Vertical and Horizontal Fabrication of Alginate-Based Vascular-Like Tubular Constructs Using Inkjetting," ASME J. Manuf. Sci. Eng., 136(6), p. 061020.
19. 2 Photodetectors for DNA Biosensors," Biosens. Bioelectron., 25 (5), pp. 1229-1234.
20. Zheng, Q., Lu, J., Chen, H., Huang, L., Cai, J., and Xu, Z., 2011, "Application of Inkjet Printing Technique for Biological Material Delivery and Antimicrobial Assays," Anal. Biochem., 410(2), pp. 171-176.
21. Rodriguez-Devora, J. I., Zhang, B., Reyna, D., Shi, Z. D., and Xu, T., 2012, "High Throughput Miniature Drug-Screening Platform Using Bioprinting Technology,"Biofabrication, 4(3), p. 035001.
22. Yamaguchi, S., Ueno, A., Akiyama, Y., and Morishima, K., 2012, "Cell Patterning Through Inkjet Printing of One Cell Per Droplet," Biofabrication, 4 (4), p. 045005.
23. Sun, W., Darling, A., Starly, B., and Nam, J., 2004, "Computer-Aided Tissue Engineering: Overview, Scope and Challenges," Biotechnol. Appl. Biochem., 39(1), pp. 29-47.
24. Calvert, P., 2007, "Printing Cells," Science, 318 (5848), pp. 208-209.
25. Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., and Markwald, R. R., 2009, "Organ Printing: Tissue Spheroids as Building Blocks,"Biomaterials, 30(12), pp. 2164-2174.
26. Jayasinghe, S. N., 2011, "Biojets in Regenerative Biology and Medicine,"Mater. Today, 14(5), pp. 202-211.
27. Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., and Dubruel, P., 2012, "A Review of Trends and Limitations in Hydrogel-Rapid Prototyping for Tissue Engineering," Biomaterials, 33(26), pp. 6020-6041.
28. Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., and Hutmacher, D. W., 2012, "Additive Manufacturing of Tissues and Organs,"Prog. Polym. Sci., 37(8), pp. 1079-1104.
29. Xu, T., Zhao, W., Zhu, J. M., Albanna, M. Z., Yoo, J. J., and Atala, A., 2013, "Complex Heterogeneous Tissue Constructs Containing Multiple Cell Types Prepared by Inkjet Printing Technology," Biomaterials, 34(1), pp. 130-139.
30. Kasili, P. M., Cullum, B. M., Griffin, G. D., and Vo-Dinh, T., 2002, "Nanosensor for in vivo Measurement of the Carcinogen Benzo a Pyrene in a Single Cell," J. Nanosci. Nanotechnol., 2(6), pp. 653-658.
31. Rudensky, B., Paz, E., Altarescu, G., Raveh, D., Elstein, D., and Zimran, A., 2003, "Fluorescent Flow Cytometric Assay: A New Diagnostic Tool for Measuring Beta-Glucocerebrosidase Activity in Gaucher Disease," Blood Cells, Mol., Dis., 30(1), pp. 97-99.
32. Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., and Bhaduri, S., 2007, "Drop-on-Demand Printing of Cells and Materials for Designer Tissue Constructs," Mater. Sci. Eng.: C, 27 (3), pp. 372-376.
33. Dababneh, A. B., and Ozbolat, I. T., 2014, "Bioprinting Technology: A Current State-of-the-Art Review," ASME J. Manuf. Sci. Eng., 136(6), p. 061016.
34. Ikegawa, M., Ishii, E., Harada, N., and Takagishi, T., 2014, "Development of Ink-Particle Flight Simulation for Continuous Inkjet Printers," ASME J. Manuf. Sci. Eng., 136(5), p. 051021.
35. Fathi, S., Dickens, P., Khodabakhshi, K., and Gilbert, M., 2013, "Microcrystal Particles Behaviour in Inkjet Printing of Reactive Nylon Materials," ASME J. Manuf. Sci. Eng., 135(1), p. 011009.
36. Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., and Chrisey, D. B., 2004, "Application of Laser Printing to Mammalian Cells," Thin Solid Films, 453-454, pp. 383-387.
37. Melissinaki, V., Gill, A. A., Ortega, I., Vamvakaki, M., Ranella, A., Haycock, J. W., Fotakis, C., Farsari, M., and Claeyssens, F., 2011, "Direct Laser Writing of 3D Scaffolds for Neural Tissue Engineering Applications," Biofabrication, 3(4), p. 045005.
38. Jayasinghe, S. N., Qureshi, A. N., and Eagles, P. A., 2006, "Electrohydrodynamic Jet Processing: An Advanced Electric-Field-Driven Jetting Phenomenon for Processing Living Cells," Small, 2(2), pp. 216-219.
39. Yao, R., Zhang, R. J., Luan, J., and Lin, F., 2012, "Alginate and Alginate/Gelatin Microspheres for Human Adipose-Derived Stem Cell Encapsulation and Differentiation," Biofabrication, 4(2), p. 025007.
40. Wei, C., and Dong, J., 2014, "Development and Modeling of Melt Electrohydrodynamic-Jet Printing of Phase-Change Inks for High-Resolution Additive Manufacturing," ASME J. Manuf. Sci. Eng., 136(6), p. 061010.
41. Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keles, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Haeggstrom, E., Khademhosseini, A., and Demirci, U., 2010, "Layer by Layer Three-Dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets," Tissue Eng., Part C, 16 (1), pp. 157-166.
42. Demirci, U., 2006, "Acoustic Picoliter Droplets for Emerging Applications in Semiconductor Industry and Biotechnology," J. Microelectromech. Syst., 15(4), pp. 957-966.
43. Xu, T., Jin, J., Gregory, C., Hickman, J. J., and Boland, T., 2005, "Inkjet Printing of Viable Mammalian Cells," Biomaterials, 26(1), pp. 93-99.
44. Ringeisen, B. R., Spargo, B. J., and Wu, P. K., 2010, Cell and Organ Printing, Springer, New York, pp. 3-18.
45. Takahashi, S., Kitagawa, H., and Tomikawa, Y., 2002, "A Study of Liquid Dispensing Head Using Fluidic Inertia," Jpn. J. Appl. Phys, pp. 3442-3445.
46. Li, R., Ashgriz, N., and Chandra, S., 2008, "Droplet Generation From Pulsed Micro-Jets," Exp. Therm. Fluid Sci., 32(8), pp. 1679-1686.
47. Barron, J. A., Krizman, D. B., and Ringeisen, B. R., 2005, "Laser Printing of Single Cells: Statistical Analysis, Cell Viability, and Stress," Ann. Biomed. Eng., 33 (2), pp. 121-130.
48. Yusof, A., Keegan, H., Spillane, C. D., Sheils, O. M., Martin, C. M., O'Leary, J. J., Zengerle, R., and Koltay, P., 2011, "Inkjet-Like Printing of Single-Cells,"Lab Chip, 11(14), pp. 2447-2454.
49. Chen, A. U., and Basaran, O. A., 2002, "A New Method for Significantly Reducing Drop Radius Without Reducing Nozzle Radius in Drop-on-Demand Drop Production," Phys. Fluids, 14.