Additive manufacturing of tissues and organs

Progress in Polymer Science

Volumn 37, Issue 8, 2012, Pages 1079-1104

  Melchels, Ferry P W ^a,b   Domingos, Marco A N ^c   Klein, Travis J ^a   Malda, Jos ^a,b   Bartolo, Paulo J ^c   Hutmacher, Dietmar W ^a,d  

^a QUEENSLAND UNIVERSITY OF TECHNOLOGY   (Australia)

^b UNIVERSITY MEDICAL CENTER UTRECHT   (Netherlands)

^c POLYTECHNIC INSTITUTE OF LEIRIA   (Portugal)

^d GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Additive manufacturing; Biofabrication; Bioprinting; Hydrogels; Tissue engineering

Indexed keywords

3D PRINTERS; CELL ENGINEERING; COMPUTER AIDED DESIGN; HISTOLOGY; HYDROGELS; TISSUE ENGINEERING;

ADDITIVE MANUFACTURING TECHNOLOGY; BIOFABRICATION; BIOPRINTING; GEOMETRIC COMPLEXITY; MANUFACTURING TECHNIQUES; SIMULTANEOUS DEPOSITION; SPATIAL VARIATIONS; TISSUE CONSTRUCTS;

TISSUE;

EID: 84862648665     PISSN: 00796700     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.progpolymsci.2011.11.007     Document Type: Review

References (180)

1. R. Langer, and J.P. Vacanti Tissue engineering Science 260 1993 920 926 (Pubitemid 23209960)
2. J. Malda, T.B.F. Woodfield, F. van der Vloodt, C. Wilson, D.E. Martens, J. Tramper, C.A. van Blitterswijk, and J. Riesle The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage Biomaterials 26 2005 63 72 (Pubitemid 38759472)
3. S.M. Peltola, F.P.W. Melchels, D.W. Grijpma, and M. Kellomaki A review of rapid prototyping techniques for tissue engineering purposes Ann Med 40 2008 268 280 (Pubitemid 351563939)
4. M.A. Woodruff, and D.W. Hutmacher The return of a forgotten polymer - polycaprolactone in the 21st century Prog Polym Sci 35 2010 1217 1256
5. ASTM standard F2792-10 standard terminology for additive manufacturing technologies. West Conshohocken, PA: ASTM International; 2010, doi:110.1520/F2792-10; www.astm.org.
6. S.J. Hollister Porous scaffold design for tissue engineering Nat Mater 4 2005 518 524 (Pubitemid 40952745)
7. J.J. Ballyns, and L.J. Bonassar Image-guided tissue engineering J Cell Mol Med 13 2009 1428 1436
8. M.J. Lysaght, A. Jaklenec, and E. Deweerd Great expectations: private sector activity in tissue engineering, regenerative medicine, and stem cell therapeutics Tissue Eng Pt A 14 2008 305 315
9. J.T.K. Melton, A.J. Wilson, P. Chapman-Sheath, and A.J. Cossey TruFit CB (R) bone plug:chondral repair, scaffold design, surgical technique and early experiences Expert Rev Med Devices 7 2010 333 341
10. Z. Lokmic, F. Stillaert, W.A. Morrison, E.W. Thompson, and G.M. Mitchell An arteriovenous loop in a protected space generates a permanent, highly vascular, tissue-engineered construct FASEB J 21 2007 511 522 (Pubitemid 46213498)
11. F.A. Probst, D.W. Hutmacher, D.F. Muller, H.G. Machens, and J.T. Schantz Calvarial reconstruction by customized bioactive implant Handchir Mikrochir Plast Chir 42 2010 369 373
12. T.N. McAllister, N. Dusserre, M. Maruszewski, and N. L'Heureux Cell-based therapeutics from an economic perspective: primed for a commercial success or a research sinkhole? Regen Med 3 2008 925 937
13. M.J. Lysaght, and A.L. Hazlehurst Tissue engineering: the end of the beginning Tissue Eng 10 2004 309 320 (Pubitemid 38199385)
14. A. Bouchie Tissue engineering firms go under Nat Biotechnol 20 2002 1178 1179 (Pubitemid 35462473)
15. N. Pangarkar, M. Pharoah, A. Nigam, D.W. Hutmacher, and S. Champ Advanced tissue sciences inc: learning from the past, a case study for regenerative medicine Regen Med 5 2010 823 835
16. R. Archer, and D.J. Williams Why tissue engineering needs process engineering Nat Biotechnol 23 2005 1353 1355 (Pubitemid 41679381)
17. P. Singh, and D.J. Williams Cell therapies: realizing the potential of this new dimension to medical therapeutics J Tissue Eng Regen Med 2 2008 307 319
18. V. Mironov, V. Kasyanov, C. Drake, and R.R. Markwald Organ printing: promises and challenges Regen Med 3 2008 93 103 (Pubitemid 351541193)
19. E. Malone, and H. Lipson Fab@Home: the personal desktop fabricator kit Rapid Prototyping J 13 2007 245 255 (Pubitemid 47174531)
20. M.S. Hahn, L.J. Taite, J.J. Moon, M.C. Rowland, K.A. Ruffino, and J.L. West Photolithographic patterning of polyethylene glycol hydrogels Biomaterials 27 2006 2519 2524 (Pubitemid 43113276)
21. A. Khademhosseini, K.Y. Suh, J.M. Yang, G. Eng, J. Yeh, S. Levenberg, and R. Langer Layer-by-layer deposition of hyaluronic acid and poly-l-lysine for patterned cell co-cultures Biomaterials 25 2004 3583 3592 (Pubitemid 38327046)
22. G.H. Underhill, A.A. Chen, D.R. Albrecht, and S.N. Bhatia Assessment of hepatocellular function within PEG hydrogels Biomaterials 28 2007 256 270 (Pubitemid 44537392)
23. J. Lee, M.J. Cuddihy, and N.A. Kotov Three-dimensional cell culture matrices: state of the art Tissue Eng Pt B 14 2008 61 86
24. D.W. Hutmacher Biomaterials offer cancer research the third dimension Nat Mater 9 2010 90 93
25. J.C.Y. Dunn, M.L. Yarmush, H.G. Koebe, and R.G. Tompkins Hepatocyte function and extracellular matrix geometry long-term culture in a sandwich configuration FASEB J 3 1989 174 177
26. P.D. Benya, and J.D. Shaffer Dedifferentiated chondrocytes reexpress the differentiated collagen phenotype when cultured in agarose gels Cell 30 1982 215 224 (Pubitemid 13237099)
27. J.C. Reichert, S. Saifzadeh, M.E. Wullschleger, D.R. Epari, M.A. Schutz, G.N. Duda, H. Schell, M. van Griensven, H. Redl, and D.W. Hutmacher The challenge of establishing preclinical models for segmental bone defect research Biomaterials 30 2009 2149 2163
28. W.C. Wilson, and T. Boland Cell and organ printing 1: protein and cell printers Anat Rec Part A 272 2003 491 496 (Pubitemid 37238323)
29. B. Derby Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures J Mater Chem 18 2008 5717 5721
30. J.A. Barron, P. Wu, H.D. Ladouceur, and B.R. Ringeisen Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns Biomed Microdevices 6 2004 139 147 (Pubitemid 38801855)
31. F. Guillemot, A. Souquet, S. Catros, B. Guillotin, J. Lopez, M. Faucon, B. Pippenger, R. Bareille, M. Remy, S. Bellance, P. Chabassier, J.C. Fricain, and J. Amedee High-throughput laser printing of cells and biomaterials for tissue engineering Acta Biomater 6 2010 2494 2500
32. K. Arcaute, B. Mann, and R. Wicker Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds Acta Biomater 6 2010 1047 1054
33. K. Arcaute, B.K. Mann, and R.B. Wicker Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells Ann Biomed Eng 34 2006 1429 1441 (Pubitemid 44451089)
34. B. Dhariwala, E. Hunt, and T. Boland Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography Tissue Eng 10 2004 1316 1322 (Pubitemid 39557836)
35. Y. Lu, G. Mapili, G. Suhali, S.C. Chen, and K. Roy A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds J Biomed Mater Res A 77 2006 396 405 (Pubitemid 47233542)
36. R. Censi, W. Schuurman, J. Malda, G. Di Dato, P.E. Burgisser, W.J.A. Dhert, C.F. Van Nostrum, P. Di Martino, T. Vermonden, and W.E. Hennink Printable photopolymerizable thermosensitive p(HPMA-lactate)-PEG hydrogel for tissue engineering Adv Funct Mater 21 2011 1833 1842
37. D.L. Cohen, E. Malone, H. Lipson, and L.J. Bonassar Direct freeform fabrication of seeded hydrogels in arbitrary geometries Tissue Eng 12 2006 1325 1335 (Pubitemid 44024502)
38. C.M. Smith, A.L. Stone, R.L. Parkhill, R.L. Stewart, M.W. Simpkins, A.M. Kachurin, W.L. Warren, and S.K. Williams Three-dimensional bioassembly tool for generating viable tissue-engineered constructs Tissue Eng 10 2004 1566 1576 (Pubitemid 39557860)
39. S. Khalil, J. Nam, and W. Sun Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds Rapid Prototyping J 11 2005 9 17 (Pubitemid 40242606)
40. Y.N. Yan, X.H. Wang, Z. Xiong, H.X. Liu, F. Liu, F. Lin, R.D. Wu, R.J. Zhang, and Q.P. Lu Direct construction of a three-dimensional structure with cells and hydrogel J Bioact Compat Polym 20 2005 259 269 (Pubitemid 40663648)
41. X.H. Wang, Y.N. Yan, Y.Q. Pan, Z. Xiong, H.X. Liu, B. Cheng, F. Liu, F. Lin, R.D. Wu, R.J. Zhang, and Q.P. Lu Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system Tissue Eng 12 2006 83 90
42. N.E. Fedorovich, J.R. Dewijn, A.J. Verbout, J. Alblas, and W.J.A. Dhert Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing Tissue Eng Pt A 14 2008 127 133 (Pubitemid 351520446)
43. S.J. Li, Y.N. Yan, Z. Xiong, C.Y. Weng, R.J. Zhang, and X.H. Wang Gradient hydrogel construct based on an improved cell assembling system J Bioact Compat Polym 24 2009 84 99
44. L. Pescosolido, W. Schuurman, J. Malda, P. Matricardi, F. Alhaique, T. Coviello, P.R. van Weeren, W.J.A. Dhert, W.E. Hennink, and T. Vermonden Hyaluronic acid and dextran based semi-IPN hydrogels as biomaterials for bioprinting Biomacromolecules 12 2011 1831 1838
45. V. Keriquel, F. Guillemot, I. Arnault, B. Guillotin, S. Miraux, J. Amedee, J.-C. Fricain, and S. Catros In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice Biofabrication 2 2010 014101/1 014101/8
46. C. Norotte, F.S. Marga, L.E. Niklason, and G. Forgacs Scaffold-free vascular tissue engineering using bioprinting Biomaterials 30 2009 5910 5917
47. S.J. Li, Z. Xiong, X.H. Wang, Y.N. Yan, H.X. Liu, and R.J. Zhang Direct fabrication of a hybrid cell/hydrogel construct by a double-nozzle assembling technology J Bioact Compat Polym 24 2009 249 265
48. Y.N. Xia, and G.M. Whitesides Soft lithography Annu Rev Mater Sci 28 1998 153 184 (Pubitemid 128631417)
49. D.J. Odde, and M.J. Renn Laser-guided direct writing for applications in biotechnology Trends Biotechnol 17 1999 385 389 (Pubitemid 29450437)
50. J.S. Miller, and J.L. West Rapid prototyping of hydrogels to guide tissue formation P.J. Bartolo, B. Bidanda, Biomaterials and prototyping in medical applications 2008 Springer New York 49 65
51. J.M. Karp, Y. Yeo, W.L. Geng, C. Cannizarro, K. Yan, D.S. Kohane, G. Vunjak-Novakovic, R.S. Langer, and M. Radisic A photolithographic method to create cellular micropatterns Biomaterials 27 2006 4755 4764 (Pubitemid 43870120)
52. P.J.D. Bartolo, A. Mendes, and A. Jardini Bio-prototyping M.W. Collins, C.A. Brebbia, Design and nature II - comparing design in nature with science and engineering 2004 WIT Press London 535 566
53. M. Edinger, Y.A. Cao, Y.S. Hornig, D.E. Jenkins, M.R. Verneris, M.H. Bachmann, R.S. Negrin, and C.H. Contag Advancing animal models of neoplasia through in vivo bioluminescence imaging Eur J Cancer 38 2002 2128 2136 (Pubitemid 35223250)
54. D.P. McElroy, L.R. MacDonald, F.J. Beekman, Y.C. Wang, B.E. Patt, J.S. Iwanczyk, B.M.W. Tsui, and E.J. Hoffman Performance evaluation of A-SPECT: a high resolution desktop pinhole SPECT system for imaging small animals IEEE Trans Nucl Sci 49 2002 2139 2147 (Pubitemid 35443066)
55. H.G. Potter, B.J. Nestor, C.M. Sofka, S.T. Ho, L.E. Peters, and E.D.A. Salvati Magnetic resonance imaging after total hip arthroplasty: evaluation of periprosthetic soft tissue J Bone Joint Surg Am 86A 2004 1947 1954 (Pubitemid 39223463)
56. E.L. Ritman Micro-computed tomography-current status and developments Annu Rev Biomed Eng 6 2004 185 208
57. T. Boland, V. Mironov, A. Gutowska, E.A. Roth, and R.R. Markwald Cell and organ printing 2: fusion of cell aggregates in three-dimensional gels Anat Rec Part A 272 2003 497 502 (Pubitemid 37238324)
58. T. Boland, X. Tao, B.J. Damon, B. Manley, P. Kesari, S. Jalota, and S. Bhaduri Drop-on-demand printing of cells and materials for designer tissue constructs Mat Sci Eng C 27 2007 372 376 (Pubitemid 46281612)
59. Nishiyama Y, Nakamura M, Henmi C, Yamaguchi K, Mochizuki S, Nakagawa H, Tsui BMW, Hoffman EJ. The ASME international conference on manufacturing science and engineering 2007. New York: American Society for Mechanical Engineers; 2007. p. 97-102.
60. E.A. Roth, T. Xu, M. Das, C. Gregory, J.J. Hickman, and T. Boland Inkjet printing for high-throughput cell patterning Biomaterials 25 2004 3707 3715 (Pubitemid 38327059)
61. R.E. Saunders, J.E. Gough, and B. Derby Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing Biomaterials 29 2008 193 203 (Pubitemid 350016297)
62. T. Xu, J. Jin, C. Gregory, J.J. Hickman, and T. Boland Inkjet printing of viable mammalian cells Biomaterials 26 2005 93 99 (Pubitemid 38759475)
63. T. Xu, H. Kincaid, A. Atala, and J.J. Yoo High-throughput production of single-cell microparticles using an inkjet printing technology J Manuf Sci Eng 130 2008 021017/1 021017/5
64. W. Xu, X.H. Wang, Y.N. Yan, W. Zheng, Z. Xiong, F. Lin, R.D. Wu, and R.J. Zhang Rapid prototyping three-dimensional cell/gelatin/fibrinogen constructs for medical regeneration J Bioact Compat Polym 22 2007 363 377 (Pubitemid 47366790)
65. R.A. Giordano, B.M. Wu, S.W. Borland, L.G. Cima, E.M. Sachs, and M.J. Cima Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing J Biomat Sci Polym Ed 8 1996 63 75 (Pubitemid 26377597)
66. C.X.F. Lam, X.M. Mo, S.H. Teoh, and D.W. Hutmacher Scaffold development using 3D printing with a starch-based polymer Mat Sci Eng C 20 2002 49 56 (Pubitemid 34718477)
67. H. Seitz, W. Rieder, S. Irsen, B. Leukers, and C. Tille Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering J Biomed Mater Res B 74 2005 782 788 (Pubitemid 41076949)
68. F.P.W. Melchels, J. Feijen, and D.W. Grijpma A review on stereolithography and its applications in biomedical engineering Biomaterials 31 2010 6121 6130
69. F.P.W. Melchels, K. Bertoldi, R. Gabbrielli, A.H. Velders, J. Feijen, and D.W. Grijpma Mathematically defined tissue engineering scaffold architectures prepared by stereolithography Biomaterials 31 2010 6909 6916
70. V. Chan, P. Zorlutuna, J.H. Jeong, H. Kong, and R. Bashir Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation Lab Chip 10 2010 2062 2070
71. G.M. Gratson, M.J. Xu, and J.A. Lewis Microperiodic structures - direct writing of three-dimensional webs Nature 428 2004 386 (Pubitemid 38419677)
72. S. Ghosh, S.T. Parker, X.Y. Wang, D.L. Kaplan, and J.A. Lewis Direct-write assembly of microperiodic silk fibroin scaffolds for tissue engineering applications Adv Funct Mater 18 2008 1883 1889
73. D.W. Hutmacher, T. Schantz, I. Zein, K.W. Ng, S.H. Teoh, and K.C. Tan Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling J Biomed Mater Res 55 2001 203 216 (Pubitemid 32198503)
74. I. Zein, D.W. Hutmacher, K.C. Tan, and S.H. Teoh Fused deposition modeling of novel scaffold architectures for tissue engineering applications Biomaterials 23 2002 1169 1185 (Pubitemid 33109049)
75. E.N. Antonov, V.N. Bagratashvili, M.J. Whitaker, J.J.A. Barry, K.M. Shakesheff, A.N. Konovalov, V.K. Popov, and S.M. Howdle Three-dimensional bioactive and biodegradable scaffolds fabricated by surface-selective laser sintering Adv Mater 17 2005 327 330 (Pubitemid 40320154)
76. J.M. Williams, A. Adewunmi, R.M. Schek, C.L. Flanagan, P.H. Krebsbach, S.E. Feinberg, S.J. Hollister, and S. Das Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering Biomaterials 26 2005 4817 4827 (Pubitemid 40347312)
77. H. Zhang, D.W. Hutmacher, F. Chollet, A.N. Poo, and E. Burdet Microrobotics and MEMS-based fabrication techniques for scaffold-based tissue engineering Macromol Biosci 5 2005 477 489 (Pubitemid 40933985)
78. H. Zhang, E. Burdet, A.N. Poo, and D.W. Hutmacher Microassembly fabrication of tissue engineering scaffolds with customized design IEEE Trans Autom Sci Eng 5 2008 446 456
79. D. Puppi, F. Chiellini, A.M. Piras, and E. Chiellini Polymeric materials for bone and cartilage repair Prog Polym Sci 35 2010 403 440
80. L.S. Nair, and C.T. Laurencin Biodegradable polymers as biomaterials Prog Polym Sci 32 2007 762 798 (Pubitemid 47198287)
81. S.M. Best, A.E. Porter, E.S. Thian, and J. Huang Bioceramics: past, present and for the future J Eur Ceram Soc 28 2008 1319 1327
82. A.R. Boccaccini, and J.J. Blaker Bioactive composite materials for tissue engineering scaffolds Expert Rev Med Devices 2 2005 303 317 (Pubitemid 40691963)
83. N.E. Fedorovich, J. Alblas, J.R. de Wijn, W.E. Hennink, A.J. Verbout, and W.J.A. Dhert Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing Tissue Eng 13 2007 1905 1925 (Pubitemid 47293990)
84. M.N. Cooke, J.P. Fisher, D. Dean, C. Rimnac, and A.G. Mikos Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth J Biomed Mater Res B 64 2003 65 69 (Pubitemid 37517140)
85. T. Matsuda, and M. Mizutani Liquid acrylate-endcapped biodegradable poly(e-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs J Biomed Mater Res 62 2002 395 403 (Pubitemid 35332203)
86. F.P.W. Melchels, J. Feijen, and D.W. Grijpma A poly(dl-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography Biomaterials 30 2009 3801 3809
87. L. Elomaa, S. Teixeira, R. Hakala, H. Korhonen, D.W. Grijpma, and J.V. Seppälä Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography Acta Biomater 7 2011 3850 3856
88. F.P.W. Melchels, J. Feijen, and D.W. Grijpma Poly(d,l-lactide)/ hydroxyapatite composite tissue engineering scaffolds prepared by stereolithography 2nd Chinese-European symposium on biomaterials in regenerative medicine 2009 paper 39015/1
89. T.M.G. Chu, D.G. Orton, S.J. Hollister, S.E. Feinberg, and J.W. Halloran Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures Biomaterials 23 2002 1283 1293 (Pubitemid 34112425)
90. J. Patterson, M.M. Martino, and J.A. Hubbell Biomimetic materials in tissue engineering Mater Today 13 2010 14 22
91. A. Skardal, J. Zhang, L. McCoard, X. Xu, S. Oottamasathien, and G.D. Prestwich Photocrosslinkable hyaluronan-gelatin hydrogels for two-step bioprinting Tissue Eng Pt A 16 2010 2675 2685
92. L. Möller, A. Krause, J. Dahlmann, I. Gruh, A. Kirschning, and G. Dräger Preparation and evaluation of hydrogel-composites from methacrylated hyaluronic acid, alginate, and gelatin for tissue engineering Int J Artif Organs 34 2011 93 102
93. C.R. Nuttelman, M.A. Rice, A.E. Rydholm, C.N. Salinas, D.N. Shah, and K.S. Anseth Macromolecular monomers for the synthesis of hydrogel niches and their application in cell encapsulation and tissue engineering Prog Polym Sci 33 2008 167 179 (Pubitemid 351635629)
94. M.P. Lutolf, P.M. Gilbert, and H.M. Blau Designing materials to direct stem-cell fate Nature 462 2009 433 441
95. G.D. Nicodemus, and S.J. Bryant Cell encapsulation in biodegradable hydrogels for tissue engineering applications Tissue Eng Pt B 14 2008 149 165 (Pubitemid 351839212)
96. M.P. Lutolf, J.L. Lauer-Fields, H.G. Schmoekel, A.T. Metters, F.E. Weber, G.B. Fields, and J.A. Hubbell Synthetic matrix metalloproteinase-sensitive hydrogels for the conduction of tissue regeneration: engineering cell-invasion characteristics Proc Natl Acad Sci USA 100 2003 5413 5418 (Pubitemid 36542719)
97. S.C. Rizzi, M. Ehrbar, S. Halstenberg, G.P. Raeber, H.G. Schmoekel, H. Hagenmuller, R. Muller, F.E. Weber, and J.A. Hubbell Recombinant protein-co-PEG networks as cell-adhesive and proteolytically degradable hydrogel matrixes. Part II: biofunctional characteristics Biomacromolecules 7 2006 3019 3029 (Pubitemid 46039956)
98. H.J. Kong, D. Kaigler, K. Kim, and D.J. Mooney Controlling rigidity and degradation of alginate hydrogels via molecular weight distribution Biomacromolecules 5 2004 1720 1727 (Pubitemid 39335207)
99. A.M. Kloxin, A.M. Kasko, C.N. Salinas, and K.S. Anseth Photodegradable hydrogels for dynamic tuning of physical and chemical properties Science 324 2009 59 63
100. S.J. Bryant, and K.S. Anseth Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels J Biomed Mater Res 59 2002 63 72
101. A. Tirella, F. Vozzi, G. Vozzi, and A. Ahluwalia PAM2 (piston assisted microsyringe): a new rapid prototyping technique for biofabrication of cell incorporated scaffolds Tissue Eng Pt C 17 2011 229 237
102. S. Khalil, and W. Sun Bioprinting endothelial cells with alginate for 3D tissue constructs J Biomech Eng 131 2009 111002/1 111002/8
103. A. Tirella, A. Orsini, G. Vozzi, and A. Ahluwalia A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds Biofabrication 1 2009 045002/1 045002/12
104. N.E. Fedorovich, I. Swennen, J. Girones, L. Moroni, C.A. van Blitterswijk, E. Schacht, J. Alblas, and W.J.A. Dhert Evaluation of photocrosslinked lutrol hydrogel for tissue printing applications Biomacromolecules 10 2009 1689 1696
105. A. Skardal, J. Zhang, and G.D. Prestwich Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates Biomaterials 31 2010 6173 6181
106. V. Mironov, R.P. Visconti, V. Kasyanov, G. Forgacs, C.J. Drake, and R.R. Markwald Organ printing: tissue spheroids as building blocks Biomaterials 30 2009 2164 2174
107. T.J. Klein, B.L. Schumacher, T.A. Schmidt, K.W. Li, M.S. Voegtline, K. Masuda, E. Thonar, and R.L. Sah Tissue engineering of stratified articular cartilage from chondrocyte subpopulations Osteoarthritis Cartilage 11 2003 595 602 (Pubitemid 36926535)
108. O.H. Kwon, A. Kikuchi, M. Yamato, Y. Sakurai, and T. Okano Rapid cell sheet detachment from poly(N-isopropylacrylamide)-grafted porous cell culture membranes J Biomed Mater Res 50 2000 82 89
109. I. Elloumi-Hannachi, M. Yamato, and T. Okano Cell sheet engineering: a unique nanotechnology for scaffold-free tissue reconstruction with clinical applications in regenerative medicine J Intern Med 267 2010 54 70
110. Y. Tsuda, T. Shimizu, M. Yarnato, A. Kikuchi, T. Sasagawa, S. Sekiya, J. Kobayashi, G. Chen, and T. Okano Cellular control of tissue architectures using a three-dimensional tissue fabrication technique Biomaterials 28 2007 4939 4946 (Pubitemid 47362351)
111. R. Sodian, P. Fu, C. Lueders, D. Szymanski, C. Fritsche, M. Gutberlet, S.P. Hoerstrup, H. Hausmann, T. Lueth, and R. Hetzer Tissue engineering of vascular conduits: fabrication of custom-made scaffolds using rapid prototyping techniques Thorac Cardiov Surg 53 2005 144 149 (Pubitemid 40827250)
112. R. Sodian, M. Loebe, A. Hein, D.P. Martin, S.P. Hoerstrup, E.V. Potapov, H.A. Hausmann, T. Lueth, and R. Hetzer Application of stereolithography for scaffold fabrication for tissue engineered heart valves ASAIO J 48 2002 12 16 (Pubitemid 34575762)
113. T.B.F. Woodfield, M. Guggenheim, B. von Rechenberg, J. Riesle, C.A. van Blitterswijk, and V. Wedler Rapid prototyping of anatomically shaped, tissue-engineered implants for restoring congruent articulating surfaces in small joints Cell Prolif 42 2009 485 497
114. L. Kovacs, A. Yassouridis, A. Zimmermann, G. Brockmann, A. Wohnl, M. Blaschke, M. Eder, K. Schwenzer-Zimmerer, R. Rosenberg, N.A. Papadopulos, and E. Biemer Optimization of 3-dimensional imaging of the breast region with 3-dimensional laser scanners Ann Plast Surg 56 2006 229 236
115. T.R. Jackson, H. Liu, N.M. Patrikalakis, E.M. Sachs, and M.J. Cima Modeling and designing functionally graded material components for fabrication with local composition control Mater Design 20 1999 63 75 (Pubitemid 29388701)
116. Y.K. Siu, and S.T. Tan Representation and CAD modeling of heterogeneous objects Rapid Prototyping J 8 2002 70 75 (Pubitemid 34586481)
117. M.Y. Zhou, J.T. Xi, and J.Q. Yan Modeling and processing of functionally graded materials for rapid prototyping J Mater Process Technol 146 2004 396 402
118. M.J. Stoddart, S. Grad, D. Eglin, and M. Alini Cells and biomaterials in cartilage tissue engineering Regen Med 4 2009 81 98
119. T.J. Klein, J. Malda, R.L. Sah, and D.W. Hutmacher Tissue engineering of articular cartilage with biomimetic zones Tissue Eng Pt B 15 2009 143 157
120. T.J. Klein, S.C. Rizzi, J.C. Reichert, N. Georgi, J. Malda, W. Schuurman, R.W. Crawford, and D.W. Hutmacher Strategies for zonal cartilage repair using hydrogels Macromol Biosci 9 2009 1049 1058
121. A. Khoda, I.T. Ozbolat, and B. Koc Engineered tissue scaffolds with variational porous architecture J Biomech Eng 133 2011 011001/1 011001/12
122. F.P.W. Melchels, P.S. Wiggenhauser, D. Warne, M. Barry, F.R. Ong, W.S. Chong, D.W. Hutmacher, and J.T. Schantz CAD/CAM-assisted breast reconstruction Biofabrication 3 2011 034114/1 034114/8
123. J.H. Keyak, J.M. Meagher, H.B. Skinner, and C.D. Mote Automated 3-dimensional finite-element modeling of bone - a new method J Biomed Eng 12 1990 389 397 (Pubitemid 20238412)
124. T.T. Wohlers Wohlers report 2010; additive manufacturing state of the industry 2010 Wohlers Associates Fort Collins, CO
125. J.W. Nichol, S.T. Koshy, H. Bae, C.M. Hwang, S. Yamanlar, and A. Khademhosseini Cell-laden microengineered gelatin methacrylate hydrogels Biomaterials 31 2010 5536 5544
126. J. Yeh, Y.B. Ling, J.M. Karp, J. Gantz, A. Chandawarkar, G. Eng, J. Blumling, R. Langer, and A. Khademhosseini Micromolding of shape-controlled, harvestable cell-laden hydrogels Biomaterials 27 2006 5391 5398 (Pubitemid 44093713)
127. A. Ovsianikov, S. Schlie, A. Ngezahayo, A. Haverich, and B. Chichkov Two-photon polymerization technique for microfabrication of CAD-designed 3D scaffolds from commercially available photosensitive materials J Tissue Eng Regen Med 1 2007 443 449
128. A. Ovsianikov, M. Farsari, and B.N. Chichkov Photonic and biomedical applications of the two-photon polymerization technique P.J. Bártolo, Stereolithography - Materials, Processes and Applications 2011 Springer US 257 297
129. G. Mapili, Y. Lu, S. Chen, and K. Roy Laser-layered microfabrication of spatially patterned functionalized tissue-engineering scaffolds J Biomed Mater Res B 75 2005 414 424 (Pubitemid 41609564)
130. V.L. Tsang, A.A. Chen, L.M. Cho, K.D. Jadin, R.L. Sah, S. DeLong, J.L. West, and S.N. Bhatia Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels FASEB J 21 2007 790 801 (Pubitemid 46348254)
131. P.J. Bártolo Stereolithographic processes P.J. Bartolo, Stereolithography: materials, processes and applications 2011 Springer Science + Business Media LLC New York 1 36
132. A.S. Sawhney, C.P. Pathak, and J.A. Hubbell Bioerodible hydrogels based on photopolymerized poly(ethylene glycol)-co-poly(alpha-hydroxy acid) diacrylate macromers Macromolecules 26 1993 581 587
133. J.A. Burdick, and K.S. Anseth Photoencapsulation of osteoblasts in injectable RGD-modified PEG hydrogels for bone tissue engineering Biomaterials 23 2002 4315 4323
134. A.H. Zisch, M.P. Lutolf, M. Ehrbar, G.P. Raeber, S.C. Rizzi, N. Davies, H. Schmokel, D. Bezuidenhout, V. Djonov, P. Zilla, and J.A. Hubbell Cell-demanded release of VEGF from synthetic, biointeractive cell-ingrowth matrices for vascularized tissue growth FASEB J 17 2003 2260 2262 (Pubitemid 39561459)
135. X.Z. He, and E. Jabbari Material properties and cytocompatibility of injectable MMP degradable poly(lactide ethylene oxide fumarate) hydrogel as a carrier for marrow stromal cells Biomacromolecules 8 2007 780 792 (Pubitemid 46488458)
136. J.A. Johnson, N.J. Turro, J.T. Koberstein, and J.E. Mark Some hydrogels having novel molecular structures Prog Polym Sci 35 2010 332 337
137. J.P. Gong, Y. Katsuyama, T. Kurokawa, and Y. Osada Double-network hydrogels with extremely high mechanical strength Adv Mater 15 2003 1155 1158
138. K. Arakaki, N. Kitamura, H. Fujiki, T. Kurokawa, M. Iwamoto, M. Ueno, F. Kanaya, Y. Osada, J.P. Gong, and K. Yasuda Artificial cartilage made from a novel double-network hydrogel: in vivo effects on the normal cartilage and ex vivo evaluation of the friction property J Biomed Mater Res A 93 2009 1160 1168
139. H. Schweikl, G. Spagnuolo, and G. Schmalz Genetic and cellular toxicology of dental resin monomers J Dent Res 85 2006 870 877 (Pubitemid 44578595)
140. K.M. Galler, L. Aulisa, K.R. Regan, R.N. D'Souza, and J.D. Hartgerink Self-assembling multidomain peptide hydrogels: designed susceptibility to enzymatic cleavage allows enhanced cell migration and spreading J Am Chem Soc 132 2010 3217 3223
141. K. Haraguchi, and H.J. Li Mechanical properties and structure of polymer-clay nanocomposite gels with high clay content Macromolecules 39 2006 1898 1905
142. K. Haraguchi, T. Takehisa, and M. Ebato Control of cell cultivation and cell sheet detachment on the surface of polymer/clay nanocomposite hydrogels Biomacromolecules 7 2006 3267 3275 (Pubitemid 46039989)
143. M. Fukasawa, T. Sakai, U.I. Chung, and K. Haraguchi Synthesis and mechanical properties of a nanocomposite gel consisting of a Tetra-PEG/Clay network Macromolecules 43 2010 4370 4378
144. P. Calvert Hydrogels for soft machines Adv Mater 21 2009 743 756
145. W. Schuurman, V. Khristov, M.W. Pot, P.R. Van Weeren, W.J.A. Dhert, and J. Malda Bioprinting of hybrid tissue constructs with tailorable mechanical properties Biofabrication 3 2011 021001/1 021001/7
146. R.M. Capito, H.S. Azevedo, Y.S. Velichko, A. Mata, and S.I. Stupp Self-assembly of large and small molecules into hierarchically ordered sacs and membranes Science 319 2008 1812 1816 (Pubitemid 351451586)
147. T.P. Richardson, M.C. Peters, A.B. Ennett, and D.J. Mooney Polymeric system for dual growth factor delivery Nat Biotechnol 19 2001 1029 1034 (Pubitemid 33041886)
148. C.S.N. Choong, D.W. Hutmacher, and J.T. Triffitt Co-culture of bone marrow fibroblasts and endothelial cells on modified polycaprolactone substrates for enhanced potentials in bone tissue engineering Tissue Eng 12 2006 2521 2531 (Pubitemid 46141275)
149. H. Sekine, T. Shimizu, K. Hobo, S. Sekiya, J. Yang, M. Yamato, H. Kurosawa, E. Kobayashi, and T. Okano Endothelial cell coculture within tissue-engineered cardiomyocyte sheets enhances neovascularization and improves cardiac function of ischemic hearts Circulation 118 2008 S145 S152
150. L. Steffens, A. Wenger, G.B. Stark, and G. Finkenzeller In vivo engineering of a human vasculature for bone tissue engineering applications J Cell Mol Med 13 2009 3380 3386
151. A.K. Ekaputra, G.D. Prestwich, S.M. Cool, and D.W. Hutmacher The three-dimensional vascularization of growth factor-releasing hybrid scaffold of poly (É-caprolactone)/collagen fibers and hyaluronic acid hydrogel Biomaterials 32 2011 8108 8117
152. J. Rouwkema, N.C. Rivron, and C.A. van Blitterswijk Vascularization in tissue engineering Trends Biotechnol 26 2008 434 441
153. F.P.W. Melchels, A.M.C. Barradas, C.A. Van Blitterswijk, J. De Boer, J. Feijen, and D.W. Grijpma Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing Acta Biomater 6 2010 4208 4217
154. Y. Cao, G. Mitchell, A. Messina, L. Price, E. Thompson, A. Penington, W. Morrison, A. O'Connor, G. Stevens, and J. Cooper-White The influence of architecture on degradation and tissue ingrowth into three-dimensional poly(lactic-co-glycolic acid) scaffolds in vitro and in vivo Biomaterials 27 2006 2854 2864 (Pubitemid 43165754)
155. M. Ehrbar, V.G. Djonov, C. Schnell, S.A. Tschanz, G. Martiny-Baron, U. Schenk, J. Wood, P.H. Burri, J.A. Hubbell, and A.H. Zisch Cell-demanded liberation of VEGF(121) from fibrin implants induces local and controlled blood vessel growth Circ Res 94 2004 1124 1132 (Pubitemid 38579708)
156. S. Levenberg, J. Rouwkema, M. Macdonald, E.S. Garfein, D.S. Kohane, D.C. Darland, R. Marini, C.A. van Blitterswijk, R.C. Mulligan, P.A. D'Amore, and R. Langer Engineering vascularized skeletal muscle tissue Nat Biotechnol 23 2005 879 884 (Pubitemid 43093132)
157. J. Malda, and C.G. Frondoza Microcarriers in the engineering of cartilage and bone Trends Biotechnol 24 2006 299 304 (Pubitemid 43977904)
158. C. Weber, D. Freimark, R. Portner, P. Pino-Grace, S. Pohl, C. Wallrapp, P. Geigle, and P. Czermak Expansion of human mesenchymal stem cells in a fixed-bed bioreactor system based on non-porous glass carrier - part A: inoculation, cultivation, and cell harvest procedures Int J Artif Organs 33 2010 512 525
159. I. Martin, T. Smith, and D. Wendt Bioreactor-based roadmap for the translation of tissue engineering strategies into clinical products Trends Biotechnol 27 2009 495 502
160. N. Pangarkar, and D.W. Hutmacher Invention and business performance in the tissue-engineering industry Tissue Eng 9 2003 1313 1322 (Pubitemid 37467679)
161. K. Schenke-Layland, and R.M. Nerem In vitro human tissue models - moving towards personalized regenerative medicine Adv Drug Deliv Rev 63 2011 195 196
162. C. Mason, and E. Manzotti Regenerative medicine cell therapies: numbers of units manufactured and patients treated between 1988 and 2010 Regen Med 5 2010 307 313
163. W.R. Wagner, and B.P. Griffith Reconstructing the lung Science 329 2010 520 522
164. R.F. Service Tissue engineering. Coming soon to a knee near you: cartilage like your very own Science 322 2008 1460 1461
165. L.G. Griffith, and G. Naughton Tissue engineering - current challenges and expanding opportunities Science 295 2002 1009 1014
166. S.J. Hollister Scaffold engineering: a bridge to where? Biofabrication 1 2009 012001/1 012001/14
167. P.A. Sharp, C.L. Cooney, M.A. Kastner, J. Lees, S. Sasisekharan, M.B. Yaffe, S.N. Bhatia, T.E. Jacks, D.A. Lauffenburger, R. Langer, P.T. Hammond, and M. Sur The convergence of the life sciences, physical sciences, and engineering 2011 MIT Boston 40 pp
168. J. Hiller, and H. Lipson Design and analysis of digital materials for physical 3D voxel printing Rapid Prototyping J 15 2009 137 149
169. N.C. Rivron, J. Rouwkema, R. Truckenmuller, M. Karperien, J. De Boer, and C.A. Van Blitterswijk Tissue assembly and organization: developmental mechanisms in microfabricated tissues Biomaterials 30 2009 4851 4858
170. J.G. Fernandez, and A. Khademhosseini Micro-masonry: construction of 3D structures by microscale self-assembly Adv Mater 22 2010 2538 2541
171. A.P. McGuigan, and M.V. Sefton Vascularized organoid engineered by modular assembly enables blood perfusion Proc Natl Acad Sci USA 103 2006 11461 11466 (Pubitemid 44182474)
172. M.S. Hahn, J.S. Miller, and J.L. West Three-dimensional biochemical and biomechanical patterning of hydrogels for guiding cell behavior Adv Mater 18 2006 2679 2684 (Pubitemid 44664101)
173. G.M. Cruise, O.D. Hegre, D.S. Scharp, and J.A. Hubbell A sensitivity study of the key parameters in the interfacial photopolymerization of poly(ethylene glycol) diacrylate upon porcine islets Biotechnol Bioeng 57 1998 655 665 (Pubitemid 28086585)
174. V. Mironov, V. Kasyanov, and R.R. Markwald Organ printing: from bioprinter to organ biofabrication line Curr Opin Biotechnol 22 2011 667 673
175. A.L. Hook, D.G. Anderson, R. Langer, P. Williams, M.C. Davies, and M.R. Alexander High throughput methods applied in biomaterial development and discovery Biomaterials 31 2010 187 198
176. R. Chang, Y. Nam, and W. Sun Direct cell writing of 3D microorgan for in vitro pharmacokinetic model Tissue Eng Pt C 14 2008 157 166 (Pubitemid 351838710)
177. J. Rouwkema, S. Gibbs, M.P. Lutolf, I. Martin, G. Vunjak-Novakovic, and J. Malda In vitro platforms for tissue engineering: implications to basic research and clinical translation J Tissue Eng Regen Med 5 2011 e164 e167
178. D.L. Cohen, J.I. Lipton, L.J. Bonassar, and H. Lipson Additive manufacturing for in situ repair of osteochondral defects Biofabrication 2 2010 035004/1 035004/12
179. P.G. Campbell, and L.E. Weiss Tissue engineering with the aid of inkjet printers Expert Opin Biol Ther 7 2007 1123 1127 (Pubitemid 47305243)
180. T.D. Brown, P.D. Dalton, and D.W. Hutmacher Direct writing by way of melt electrospinning Adv Mater 23 47 2011 5651 5657 10.1002/adma.201103482