Hydrogen fuel cell technology

Advances in Hydrogen Production, Storage and Distribution

Volumn , Issue , 2014, Pages 451-498

  Squadrito, G ^a   Andaloro, L ^a   Ferraro, M ^a   Antonucci, V ^a  

^a CNR ITAE   (Italy)

Author keywords

Fuel cell (FC); Fuel cell applications; Fuel cell research issues; Renewable energy sources (RES) deployment

Indexed keywords

ELECTROLYTES; ENVIRONMENTAL IMPACT; FUEL CELLS; HYDROGEN; NATURAL RESOURCES; POLYELECTROLYTES;

CELL RESEARCH; DISTRIBUTED ENERGIES; FUEL CELL APPLICATION; HYDROGEN FUEL CELL TECHNOLOGY; POLYMER ELECTROLYTE; RENEWABLE ENERGY SOURCE; STATE OF THE ART; TECHNOLOGICAL DEVELOPMENT;

RENEWABLE ENERGY RESOURCES;

EID: 84924252538     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9780857097736.3.451     Document Type: Chapter

References (194)

1. Technology characterization: Fuel cells 2008, prepared for Environmental Protection Agency Combined Heat and Power Partnership Program, by Energy and Environmental Analysis, December 2008. http://www.epa.gov/chp/documents/catalog_chptech_fuel_cells.pdf.
2. The Fuel Cell Industry Review (2012). Fuel Cell Today 2012, November. http://www.fuelcelltoday.com/analysis/industry-review/2012/the-industry-review-2012.
3. The Fuel Cell Technologies Market report (2011) 2012, EERE - DOE, July. http://www1.eere.energy.gov/hydrogenandfuelcells/pdfs/2011_market_report.pdf.
4. Desertec Industrial Initiative, annual report 2012, http://www.dii-eumena.com/media/publications-and-downloads.html.
5. Desertec foundation, . http://www.desertec.org.
6. Renewable Energy Action Plans of EU countries: Austria, Belgium, Bulgaria, Cyprus, Chzec Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxemburg, Malta, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United Kingdom are available at . http://ec.europa.eu/energy/renewables/action_plan_en.htm.
7. U.S.Canada Clean Energy Dialogue - Action plan II 2012, published in June 2012. http://energy.gov/sites/prod/files/CED%20Action%20Plan%20II_June%2012%202012.pdf.
8. Martinot E. Local Policies for Renewable Energy: A Global Survey and Status Report 2010, http://www.direc2010.gov.in/pdf/Local%20Policies%20for%20Renewable%20Energy.pdf.
9. EU Energy roadmap, COM 885 final of 15 December 2011 2011, available at. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=COM:2011:0885:FIN:EN:PDF.
10. Energy, transport and environment indicators - 2012 edition 2013, Eurostat pocketbooks, ISSN 1725-4566. http://epp.eurostat.ec.europa.eu/cache/ITY_OFFPUB/KS-DK-12-001/EN/KS-DK-12-001-EN.PDF.
11. Renewable electricity future study 2013, National Renewable Energy Laboratory (NREL), USA, published by. http://www.nrel.gov/analysis/re_futures/.
12. Lhendup T. Rural electrification in Bhutan and a methodology for evaluation of distributed generation system as an alternative option for rural electrification. En. Sus. Dev. 2008, 12:13-24.
13. Banerjee R. Comparison of options for distributed generation in India. Energ. Policy 2006, 34:101-111.
14. Nakata T., Kubo K., Lamont A. design for renewable Energy systems with application to rural areas in Japan. Energ. Policy 2005, 33:209-219.
15. Zhang X., Kumar A. Evaluating renewable Energy-based rural electrification program in western China: emerging problems and possible scenarios. Ren. Sust. Energy Rev 2011, 15:773-779.
16. Lenz K.-F. Energy from Mongolian Gobi Desert 2012, Copyright © 2012 Karl-Friedrich Lenx, available on line:. http://k.lenz.name/LB/wp-content/uploads/2012/04/Lenz-Energy-from-the-Mongolian-Gobi-Desert1.pdf.
17. Adiyabat A., Kurokawa K., Otani K., Enebish N., Batsukh G., Battushig M., Ochirvaani D., Ganbat B. Evaluation of solar energy potential and PV module performance in the Gobi desert of Mongolia. Prog. Photov. Res. App. 2006, 14:553-566.
18. Various authors Energy from the Desert - Feasibility of Very Large Scale Photovoltaic Power Generation (VLS-PV) SYSTEMS 2003, book, James & James (Science publisher) Ltd, London (UK). K. Kurosawa (Ed.).
19. International Energy Agency The role of energy storage for mini-grid stabilization 2011, IEA PVPS Task 11, Report IEA-PVPS T11-02:2011, July 2011 (Available for free download at IEA web site).
20. THINK topic 8 final report Electricity Storage: How to Facilitate its Deployment and Operation in the EU 2012, June 2012, Available for free download at. http://www.think.eui.eu.
21. Hadjipaschalis I., Poullikkas A., Efthimiou V. Overview of current and future energy storage technologies for electric power applications. Ren. Sust. Energy Rev. 2009, 13:1513-1522.
22. Blaabjerg F., Teodorescu R., Liserre M., Timbus A.V. Overview of control and grid synchronization for distributed power generation systems. IEEE Trans. Ind. Electronics 2006, 35(5):1398-1408.
23. Wies R.W., Johnson R.A., Agrawal A.N., Chubb T.J. Simulink model for economic analysis and environmental impacts of a PV with diesel-battery system for remote villages. IEEE Trans. Power Systems 2005, 20(2):692-700.
24. Wang C., Nehrir M.H. Power management of a stand-alone wind/photovoltaic/fuelcell energy system. IEEE Trans. Energy Conv. 2008, 23(3):957-967.
25. European Commission, Joint Research Center Directorate-General Report on the Workshop on the contribution of hydrogen to reach European renewable energy targets 2007, Brussels, 29 May 2007. Available at:. http://setis.ec.europa.eu/newsroom-items-folder/hydrogen-res-workshop/workshop_report_res_hydrogen_final.pdf/view.
26. 2 and renewable energy towards zero emissions home. ECS Transaction 2009, 17:673-684.
27. Gahleitner G. Hydrogen from renewable electricity: an international review of power-to-gas pilot plants for stationary applications. Int. J. Hydrogen Energ. 2013, 38:2039-2061.
28. 'Stationary Fuel Cells at Retail and Grocery Sites' table available at . http://www.fuelcells.org/wp-content/uploads/2012/02/Grocery-Retail.pdf.
29. 'Stationary Fuel cell installations in California' - interactive web page - California Stationary Fuel cell Collaborative (CaSFCC) - . http://casfcc.org/STATIONARY_FC_MAP/.
30. Staffel I., Green R. The cost of domestic fuel cell micro-CHP systems 2012, Imperial College, London, discussion paper 2012/8, July 2012 Available at. https://spiral.imperial.ac.uk/bitstream/10044/1/9844/6/Green%202012-08.pdf.
31. Ene.field project, official web site . http://www.enefield.eu.
32. 'A California Road Map: Bringing Hydrogen and Fuel cell Vehicles to the Golden State' available at. http://cafcp.org/carsandbuses/caroadmap.
33. Han J., Charpentier J.F., Tang T. State of the art of fuel cells for ship applications 2012.
34. Fuel cells for ships 2012, DNV Research and Innovation, Position Paper 13, 2012.
35. Satlter G. Fuel cells going on-board. J. Power Sources 2000, 86:61-67.
36. McConnell V.P. Now, voyager? The increasing marine use of fuel cells. Fuel Cells 2010, 12-17. Bulletin Volume 2010, May 2010.
37. Psoma A., Sattler G. Fuel cell systems for submarines: from the first idea to serial production. J. Power Sources 2002, 106:381-383.
38. Hammerschmidt A.E. Fuel Cell Propulsion of Submarines. Advanced Naval Propulsion Symposium 2006, 30-31 October 2006, Arlington, VA, USA.
39. Krummrich S. Fuel cell methanol reformer system for submarines 2010.
40. Sattler G. PEFCs for naval ships and submarines: many tasks, one solution. J. Power Sources 1998, 71:144-149.
41. The hydrogen train - Feasibility study - Main report Hydrogen Train project reports, available at. http://cif.au.dk/fileadmin/www.cif.au.dk/Pdf/Center_for_Energiteknologi/Main_Report_FINAL_LOW.pdf.
42. 2 Info 2012, 26-37. ALPHEA Hydrogen's newletter, 52, June 2012. http://www.ALPHEA.com.
43. Feasibility study into the use of hydrogen fuel - Final report 2005, AEA technology for Rail Safety & Standards board, T351 final report produced by Available at. http://www.rssb.co.uk/sitecollectiondocuments/pdf/reports/research/T531%20Feasibility%20study%20into%20the%20use%20of%20hydrogen%20fuel%20Final%20Report.pdf.
44. Bradley T.H., Moffitt B.A., Fuller T.F., Mavris D., Parekh D.E. Design studies for hydrogen fuel cell powered unmanned aerial vehicles 2007, Am. Institute of Aeronautics and Astronautics.
45. Bradley T.H., Moffitt B.A., Parekh D.E., Mavris D.N. Flight test results for a fuel cell unmanned aerial vehicle 2007, Am. Institute of Aeronautics and Astronautics.
46. Gross D. 'Fuel cells in Aircraft' - published in Cleantech magazine 2008, November 2008. Copyright Cleantech Investor 2008. Available at. http://www.cleantechinvestor.com/portal/fuel-cells/5382-fuel-cells-in-aircraft.html.
47. 'State of the art in micro fuel cells' - Technology Watch Report 2010, Foundation for the Development of New Hydrogen technologies in Aragòn, December Available at. http://www.hyrreg.eu/opencms75/export/sites/HYRREG/archivos/101229_State_of_the_art_micro_fuel_cells.pdf.
48. Hayase M., Kawase T., Hatsuzawa T. Miniature 250μm thick fuel cell with monolithically fabricated silicon electrodes. Electrochem. Solid-State Lett. 2004, 7:A231-A234.
49. Lee S.J., Chen Y.P., Huang C.H. Electroforming of metallic bipolar plates with micro-featured flow field. J Power Sources 2005, 145:369-375.
50. Ito T., Kaneko S., Kunimatsu M. Fabrication and characterization of a thin l-PEMFC with microfabricated grooves on electroformed current collector plate. Electrochem. Solid-State Lett. 2009, 12:B154-B157.
51. Hahn R., Wagner S., Schmitz A., Reichl H. Development of a planar micro fuel cell with thin film and micro patterning technologies. J Power Sources 2004, 131:73-78.
52. Hsieh S.S., Yang S.H., Kuo J.K., Huang C.F., Tsai H.H. Study of operational parameters on the performance of micro PEMFCs with different flow fields. Energ. Convers. Manage. 2006, 47:1868-1878.
53. Cha S.W., O'Hayre R., Saito Y., Prinz F.B. The scaling behavior of flow patterns: a model investigation. J. Power Sources 2004, 134:57-71.
54. Lin P.C., Park B.Y., Madou M. Development and characterization of a miniature PEM fuel cell stack with carbon bipolar plates. J. Power Sources 2008, 176:207-214.
55. Wang Y., Pham L., de Vasconcellos G.P.S., Madou M. Fabrication and characterization of micro PEM fuel cells using pyrolyzed carbon current collector plates. J Power Sources 2010, 195:4796-4803.
56. Chan S.H., Nguyen N.T., Xia Z., Wu Z. Development of a polymeric micro fuel cell containing laser-micromachined flow channels. J. Micromech. Microeng. 2005, 15:231-236.
57. Yeom J., Mozsgai G.Z., Flachsbart B.R., Choban E.R., Asthana A., Shannon M.A., Kenis P.J.A. Microfabrication and characterization of a silicon-based millimeter scale, PEM fuel cell operating with hydrogen, methanol, or formic acid. Sensors Actuat. B: Chem. 2005, 107:882-891.
58. Heinzel A., Hebling C., Muller M., Zedda M., Muller C. Fuel cells for low power applications. J. Power Sources 2002, 105:250-255.
59. Henriques T., César B., Branco P.J.C. Increasing the efficiency of a portable PEM fuel cell by altering the cathode channel geometry: a numerical and experimental study. Appl. Energ. 2010, 87:1400-1409.
60. The department of energy hydrogen and fuel cells program plan September 2011, DOE, available at. http://www.hydrogen.energy.gov.
61. Wang Y., Chen K.S., Mishler J., Cho S.C., Adroher X.C. A review of polymer electrolyte membrane fuel cells: Technology, applications and needs on fundamental research. Appl. Energ. 2011, 88:981-1007.
62. DOE Hydrogen and fuel cell activities, progress, and plans: report to congress 2009, January 2009, Available on. http://www.hydrogen.energy.gov/pdfs/epact_report_sec811.pdf.
63. 2 PEM fuel cells systems for automotive application: 2010 update 2010, Directed Technologies report for NREL, available at. http://www1.eere.energy.gov/hydrogenandfuelcells/pdfs/dtI_80kwW_fc_system_cost_analysis_report_2010.pdf.
64. Metha V., Smith Cooper J. Review and analysis of PEM fuel cell design and manufacturing. J. Power Sources 2003, 114:32-53.
65. Park S., Lee J.W., Popov B.N. A review of gas diffusion layer in PEM fuel cells: Materials and designs. Int. J. Hydrogen Energ. 2012, 37:5850-5865.
66. Smitha B., Sridhar S., Khan A.A. Solid polymer electrolyte membranes for fuel cell applications - A review. J. Membrane Sci. 2005, 259:10-26.
67. Schmittinger W., Vahidi A. A review of the main parameters influencing long-term performance and durability of PEM fuel cells. J. Power Sources 2008, 180:1-14.
68. Lister F., McLean G. PEM fuel cell electrodes. J. Power Sources 2004, 130:61-76.
69. Chandan A., Hattenberger M., El-kharouf A., Du S., Dhir A., Self V., Pollet B.G., Ingrama A., Bujalski W. High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) - A review. J. Power Sources 2013, 231:264-278.
70. Zhang J., Xie Z., Zhang J., Tang Y., Song C., Navessin T., Shi Z., Song D., Wang H., wilkinson D.P., Liu Z.S., Holdcroft S. High temperature PEM fuel cells. J. Power Sources 2006, 160:872-891.
71. Wheeler D., Sverdrup G. Status of manufacturing: Polymer electrolyte membrane (PEM) Fuel Cells 2007, Technical Report NREL/TP-560-41655, March 2008. http://www.osti.gov/bridge.
72. Stumper J., Stone C. Recent advances in fuel cell technology at Ballard. J. Power Sources 2008, 176:468-476.
73. Radev I., Koutzarov K., Lefterova E., Tsotridis G. Influence of failure modes on PEFC Stack and single cell performance and durability. Int. J. Hydrogen Energ. 2013, 38:7133-7139.
74. Iulianelli A., Basile A. Sulfonated PEEK-based polymers in PEMFC and DMFC applications: A review. Int. J. Hydrogen Energ. 2012, 37:15241-15255.
75. Sharma S., Pollet B.G. Support materials for PEMFC and DMFC electrocatalysts - A review. J. Power Sources 2012, 208:96-119.
76. Serov A., Kwan C. Review of non-platinum anode catalysts for DMFC and PEMFC application. Appl. Cat. B: Env. 2009, 90:313-320.
77. Zhang S., Yuan X., Wang H., Mérida W., Zhu H., Shen J., Wu S., Zhang J. A review of accelerated stress tests of MEA durability in PEM fuel cells. Int. J. Hydrogen Energ. 2009, 34(1):388-404.
78. Various authors Polymer electrolyte fuel cell durability 2009, Springer, New York, (both for hydrogen and methanol fueled cells). F.N. Buchi, M. Inoru, T.J. Schmidt (Eds.).
79. Borup R., Mevers J., Pivovar B., Kim Y.S., Mukundan R., Garland N., Myers D., Wilson M., Garzon F., Wood D., Zelenay P., More K., Stroh K., Zawodzinski T., Boncella J., McGrath J.E., Inaba M., Miyatake K., Hori M., Ota K., Ogumi Z., Miyata S., Siroma Z., Uchimoto Y., Yasuda K., Kimijima K., Iwashita N. Scientific aspects of polymer electrolyte fuel cell durability and degradation. Chem. Rev. 2007, 107:3904-3951.
80. Aricò A.S., Srinivasan S., Antonucci V. DMFCs: from fundamental aspects to technology development. Fuel Cells 2001, 1:133-161.
81. Kamarudin S.K., Daud W.R.W., Ho S.L., Asran U.A. Overview on the challenges and developments of micro-direct methanol fuel cells (DMFC). J. Power Sources 2007, 163:743-754.
82. Hickner M.A., Ghassemi H., Kim Y.S., Einsla B.R., Mcgrath J.E. Alternative polymer systems for proton exchange membranes (PEMs). Chem. Rev. 2004, 104:4587-4612.
83. Doyle M., Rajendran G. Perfluorinated membranes. Handbook of Fuel Cells 2003, 351-395. Wiley, Chapter 30. W. Vielstrich, A. Lamm, H.A. Gasteiger (Eds.).
84. Passalacqua E., Lufrano F., Squadrito G., Patti A., Giorgi L. Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance. Electrochim. Acta 2001, 46:799-805.
85. Mathias M.F., Roth J., Fleming J., Lehnert W. Diffusion media materials and characterisation. Handbook of Fuel Cells 2003, 517-537. Wiley, Chapter 42. W. Vielstrich, A. Lamm, H.A. Gasteiger (Eds.).
86. Passalacqua E., Squadrito G., Lufrano F., Patti A., Giorgi L. Effects of the diffusion layer characteristics on the performance of the polymer electrolyte fuel cell electrodes. J. Appl. Electrochem. 2001, 31:449-454.
87. Squadrito G., Barbera O., Gatto I., Giacoppo G., Urbani F., Passalacqua E. CFD analysis of the flow-field scale-up influence on the electrodes performance in a PEFC. J. Power Sources 2005, 152:67-74.
88. Squadrito G., Barbera O., Giacoppo G., Urbani F., Passalacqua E. Computer aided fuel cell design and scale-up, comparison between model and experimental Results. J. Appl. Electrochem. 2007, 37:87-93.
89. Chapuis O., Prat M., Quintard M., Chane-Kane E., Guillot O., Mayer N. Two-phase flow and evaporation in model fibrous media. Application to the gas diffusion layer of PEM fuel cells. J. Power Sources 2008, 178:258-268.
90. Jiao K., Li X. Water transport in polymer electrolyte membrane fuel cells. Prog. Energ. Combust. Sci. 2011, 37:221-291.
91. Li Q., Jensen J.O., Savinell R.F., Bjerrum N.J. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells. Prog. Polym. Sci. 2009, 34:449-477.
92. Ma Y.L., Wainright J.S., Litt M.H., Savinell R.F. Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells. J. Electrochem. Soc. 2004, 151:A8-A16.
93. Zhang J., Xie Z., Zhang Jiu., Tang Y., Song C., Navessin T., Shi Z., Song D., Wang H., Wilkinson D.P., Liu Z.-S., Holdcroft S. High temperature PEM fuel cells. J. Power Sources 2006, 160:872-891.
94. Ghielmi A., Merlo L., Gebert M., Arcella V. Membrane electrode assemblies based on perfluorosulfonic ionomers for an evolving fuel cell technology. Desalination 2006, 199:6-8.
95. Merlo L., Ghielmi A., Cirillo L., Gebert M., Arcella V. Membrane electrode assemblies based on HYFLON ion for an evolving fuel cell technology. Separ. Sci. Technol. 2007, 42:2891-2908.
96. Aricò A.S., Bruce P., Scrosati B., Tarascon J.-M., Van Schalkwijk W. Nanostructured materials for advanced Energy conversion and storage devices. Nat. Mat. 2005, 4:366-377.
97. Yu P., Pemberton M., Plasse P. PtCo/C cathode catalyst for improved durability in PEMFCs. J. Power Sources 2005, 144:11-20.
98. Ismagilov Z.R., Krzhentsev M.A., Shikina N.V., Lisitsyn A.S., Okhlopkova L.B., Barnakov Ch.N., Sakashita M., Iijima T., Tadokoro K. Development of active catalysts for low Pt loading cathodes of PEMFC by surface tailoring of nanocarbon materials. Catal. Today 2005, 102-103:58-66.
99. Fernandez J.L., Walsh D.A., Bard A.J. Thermodynamic guidelines for the design of bimetallic catalysts for oxygen electroreduction and rapid screening by scanning electrochemical microscopy. M-Co (M: Pd, Ag, Au). J. Am. Chem. Soc. 2004, 127:357-365.
100. Antolini E. Formation of carbon-supported PtM alloys for low temperature fuel cells: a review. Mat. Chem. Phys. 2003, 78:563-573.
101. González-Huerta R.G., Chávez-Carvayar J.A., Solorza-Feria O. Electrocatalysis of oxygen reduction on carbon supported Ru-based catalysts in a polymer electrolyte fuel cell. J. Power Sources 2006, 153:11-17.
102. Pharkya P., Alfantazi A., Farhat Z. Fabrication using high-energy ball-milling technique and characterization of Pt-Co electrocatalysts for oxygen reduction in polymer electrolyte fuel cells. J. Fuel Cell Sci. Technol. 2005, 2:171-177.
103. Wang B. Recent development of non-platinum catalysts for oxygen reduction reaction. J. Power Sources 2005, 152:1-15.
104. Gasteiger H.A., Kocha S.S., Sompalli B., Wagner F.T. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs. Appl. Cat. B: Env. 2005, 56:9-35.
105. Fernandez J.L., Raghuveer V., Manthiram A., Bard A.J. Pd-Ti and Pd-Co-Au electrocatalysts as a replacement for platinum for oxygen reduction in proton exchange membrane fuel cells. J. Am. Chem. Soc. 2005, 127(38):13100-13101.
106. Bashyam R., Zelenay P. A class of non-precious metal composite catalysts for fuel cells. Nature 2006, 443:63-66.
107. Bezerra C.W.B., Zhang L., Lee K., Liu H., Marques A.L.B., Marques E.P., Wang H., Zhang J. A review of Fe-N/C and Co-N/C catalysts for the oxygen reduction reaction. Electrochim Acta 2008, 53:4937-4951.
108. Gottesfeld S., Pafford J. A new approach to the problem of carbon monoxide poisoning in fuel cells operating at low temperatures. J. Electrochem. Soc. 1988, 135:2651-2652.
109. Borup R.L., Davey J.R., Garzon F.H., Wood D.L., Inbody M.A. PEM fuel cell electrocatalyst durability measurements. J. Power Sources 2006, 163:76-81.
110. Yasuda K., Taniguchi A., Akita T., Iroi T., Siroma Z. Platinum dissolution and deposition in the polymer electrolyte membrane of a PEM fuel cell as studied by potential cycling. Phys. Chem. Chem. Phys. 2006, 8:746-752..
111. Kim L., Chung C.G., Sung Y.W., Chung J.S. Dissolution and migration of platinum after long-term operation of a polymer electrolyte fuel cell under various conditions. J. Power Sources 2008, 183:524-532.
112. Zhang S., Yuan X.-Z., Hin J.N.C., Wang H., Friedrich K.A., Schulze M. A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells. J. Power Sources 2009, 194:588-600.
113. Uribe F.A., Gottesfeld S., Zawodzinski J.T.A. Effect of ammonia as potential fuel impurity on proton exchange membrane fuel cell performance. J. Electrochem. Soc. 2002, 149:A293-A296.
114. Passalacqua E., Lufrano F., Squadrito G., Patti A., Giorgi L. Influence of the structure in low-Pt loading electrodes for polymer electrolyte fuel cells. Electrochim. Acta 1998, 43:3665-3673.
115. Thoben B., Siebke A. Influence of different gas diffusion layers on the water management of the PEFC cathode. J. New Mat. Electrochem. Syst. 2004, 7:13-20.
116. Yi J.S., Nguyen T.V. Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors. J. Electrochem. Soc. 1999, 146(1):38-45.
117. Wang Y., Wang C.Y. Simulation of flow and transport phenomena in a polymer electrolyte fuel cell under low-humidity operation. J. Power Sources 2005, 147:148-161.
118. Squadrito G., Barbera O., Giacoppo G., Urbani F., Passalacqua E. Computer aided fuel cell design and scale-up, comparison between model and experimental results. J. Appl. Electrochem. 2007, 37:87-93.
119. Chi P.H., Chan S.H., Weng F.B., Su A., Sui P.C., Djilali N. On the effects of non-uniform property distribution due to compression in the gas diffusion layer of a PEMFC. Int. J. Hydrogen Energ. 2010, 35:2936-2948.
120. Wang Y., Wang C.Y. Modeling polymer electrolyte fuel cells with large density and velocity changes. J. Electrochem. Soc. 2005, 152(2):A445-A453.
121. Hwang J.J. Thermal-electrochemical modeling of a proton exchange membrane fuel cell. J. Electrochem. Soc. 2006, 153(2):A216-A224.
122. Wang Y. Modeling of two-phase transport in the diffusion media of polymer electrolyte fuel cells. J. Power Sources 2008, 185:261-271.
123. Birgersson E., Noponen M., Vynnycky M. Analysis of a two-phase nonisothermal model for a PEFC. J. Electrochem. Soc. 2005, 152:A1021-A1034.
124. Pasaogullari U., Wang C.Y. Liquid water transport in gas diffusion layer of polymer electrolyte fuel cells. J. Electrochem. Soc. 2004, 151(3):A399-A406.
125. Meng H., Wang C.Y. Electron transport in PEFCs. J. Electrochem. Soc. 2004, 151:A358-A367.
126. Ralph T.R., Hards G.A., Keating J.E., Campbell S.A., Wilkinson D.P., Davis M., St-Pierre J., Johnson M.C. Low cost electrodes for proton exchange membrane fuel cells. J. Electrochem. Soc. 1997, 144:3845-3857.
127. Gostick J.T., Ioannidis M.A., Fowler M.W., Pritzker M.D. On the role of the microporous layer in PEMFC operation. Electrochem. Commun. 2009, 11:576-579.
128. Weber A.Z., Newman J. Effects of microporous layers in polymer electrolyte fuel cells. J. Electrochem. Soc. 2005, 152:A677-A688.
129. Wang Y., Wang C.Y., Chen K.S. Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells. Electrochim. Acta 2007, 52:3965-3975.
130. Benziger J., Nehlsen J., Blackwell D., Brennan T., Itescu J. Water flow in the gas diffusion layer of PEM fuel cells. J. Membrane Sci. 2005, 261:98-106.
131. Sinha P.K., Wang C.Y. Liquid water transport in a mixed-wet gas diffusion layer of a polymer electrolyte fuel cell. Chem. Eng. Sci. 2008, 63:1081-1091.
132. Gostick J.T., Ioannidis M.A., Flowler M.W., Pritzker M.D. Pore network modeling of fibrous gas diffusion layers for polymer electrolyte membrane fuel cells. J. Power Sources 2007, 173:277-290.
133. Pasaogullari U., Wang C.Y., Chen K.S. Two-phase transport in polymer electrolyte fuel cells with bilayer cathode gas diffusion media. J. Electrochem. Soc. 2005, 152:A1574-A1582.
134. Mazumder S., Cole J.V. Rigorous 3-D mathematical modeling of PEM fuel cells. J. Electrochem. Soc. 2003, 150:A1510-A1517.
135. Adrianowycz O.L. Next generation bipolar plates for automotive PEM fuel cells. DOE 2009 annual progress report V. Fuel cells 2009, GrafTech International Ltd.
136. Hermann A., Chaudhuri T., Spagnol P. Bipolar plates for PEM fuel cells: A review. Int. J. Hydrogen Energ. 2005, 30:1297-1302.
137. Tawfik H., Hung Y., Mahajan D. Metal bipolar plates for PEM fuel cell - A review. J. Power Sources 2007, 163:755-767.
138. Fleury E., Jayaraj J., Kim Y.C., Seok H.K., Kim K.Y., Kim K.B. Fe-based amorphous alloys as bipolar plates for PEM fuel cell. J. Power Sources 2006, 159:34-37.
139. Silva R.F., Franchi D., Leone A., Pilloni L., Masci A., Pozio A. Surface conductivity and stability of metallic bipolar plate materials for polymer electrolyte fuel cells. Electrochim. Acta 2006, 51:3592-3598.
140. Huang J., Baird D.G., McGrath J.E. Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials. J. Power Sources 2005, 150:110-119.
141. Wolf H., Willert-Porada M. Electrically conductive LCP-carbon composite with low carbon content for bipolar plate application in polymer electrolyte membrane fuel cell. J. Power Sources 2006, 153:41-46.
142. Yen T.J., Fang N., Zhang X., Lu G.Q., Wang C.Y. A micro methanol fuel cell operating at near room temperature. Appl. Phys. Lett. 2003, 19:4056-4058.
143. Wilkinson D.P., Vanderleeden O. Serpentine flow field design. Handbook of Fuel cells - Fundamentals technology and applications 2003, Vol. 3:315-324. chapter 27, Wiley. W. Vielstich, A. Lamm, H.A. Gastaiger (Eds.).
144. Nguyen T.V., He W. Interdigitated flow field design. Handbook of Fuel cells - Fundamentals Technology and Applications 2003, Vol. 3:325-336. chapter 28, Wiley. W. Vielstich, A. Lamm, H.A. Gastaiger (Eds.).
145. Li X., Sabir I. Review of bipolar plates in PEM fuel cells: flow-field designs. Int. J. Hydrogen Energ. 2005, 30:359-371.
146. Wang Y., Wang C.Y. Ultra large-scale simulation of polymer electrolyte fuel cells. J. Power Sources 2006, 153:130-135.
147. Yu S.H., Sohn S., Nam J.H., Kim C.J. Numerical study to examine the performance of multi-pass serpentine flow-fields for cooling plates in polymer electrolyte membrane fuel cells. J. Power Sources 2009, 194:697-703.
148. Inoue G., Yoshimoto T., Matsukuma Y., Minemoto M., Itoh H., Tsurumaki S. Numerical analysis of relative humidity distribution in polymer electrolyte fuel cell stack including cooling water. J. Power Sources 2006, 162:81-93.
149. Zhang L., Liu Y., Song H., Wang S., Zhou Y., Hu S.J. Estimation of contact resistance in proton exchange membrane fuel cells. J. Power Sources 2006, 162:1165-1171.
150. Zhou P., Wu C.W., Ma G.J. Contact resistance prediction and structure optimization of bipolar plates. J. Power Sources 2006, 159:1115-1122.
151. Chang W.R., Hwang J.J., Weng F.B., Chan S.H. Effect of clamping pressure on the performance of a PEM fuel cell. J. Power Sources 2007, 166:149-154.
152. Montanini R., Squadrito G., Giacoppo G. Assessment of Fuel Cell's Endplate Out of Plane Deformation Using Digital Image Correlation. Sensors and Microsystems, Lecture Notes in Electrical Engineering 2011, Chapter 72, Springer Science+Business Media B.V, Dordrecht, Netherlands, 2011. G. Neri, N.A. Donato, C. D'Amico, D. Natale (Eds.).
153. Wang X., Song Y., Zhang B. Experimental study on clamping pressure distribution in PEM fuel cells. J. Power Sources 2008, 179:305-309.
154. Wen C.Y., Lin Y.S., Lu C.H. Experimental study of clamping effects on the performances of a single proton exchange membrane fuel cell and a 10-cell stack. J. Power Sources 2009, 192:475-485.
155. Montanini R., Squadrito G., Giacoppo G. Measurement of the clamping pressure distribution in polymer electrolyte fuel cells using piezoresistive sensor arrays and digital image correlation techniques. J. Power Sources 2011, 196:8484-8493.
156. Various authors Part 8: Solid oxide fuel cells and systems (SOFC). Handbook of fuel cells - Fundamentals Technology and Applications 2003, Vol 4:983-1122. Wiley. W. Vielstich, A. Lam, H.A. Gasteiger (Eds.).
157. Bove R. Solid oxide fuel cells: principles, designs and state-of-the-art industries. Recent Trends in Fuel Cell Science and Technology 2007, 267-285. Springer, New York. S. Basu (Ed.).
158. Minh N.Q. Solid oxide fuel cell technology features and applications. Solid State Ionics 2004, 174:271-277.
159. Lo Faro M., La Rosa D., Antonucci V., Arico A.S. Intermediate temperature solid oxide fuel cell electrolytes. J. Indian Inst. Sci. 2009, 89:363-381.
160. Lo Faro M., Antonucci V., Antonucci P.L., Aricò A.S. Fuel flexibility: A key challenge for SOFC technology. Fuel 2012, 102:554-559..
161. Kee R.J., Zhu H., Goodwin D.G. Solid-oxide fuel cells with hydrocarbon fuels. Proc. Combust. Inst. 2005, 30:2379-2404.
162. Lo Faro M., Minutoli M., Monforte G., Antonucci V., Aricò A.S. Glycerol oxidation in solid oxide fuel cells based on a Ni-perovskite electrocatalyst. Biomass Bioenerg. 2011, 35:1075-1084.
163. Lo Faro M., Stassi A., Antonucci V., Modafferi V., Frontera P., Antonucci P., Aricò A.S. Direct utilization of methanol in solid oxide fuel cells: an electrochemical and catalytic study. Int. J. Hydrogen Energ. 2011, 36:9977-9986.
164. Lo Faro M., La Rosa D., Frontera P., Antonucci P., Antonucci V., Aricò A.S. Propane-fed solid oxide fuel cell based on a composite Ni-La-CGO anode catalyst. Cat. Lett. 2010, 136:57-64.
165. Gross M.D., Vohs J.M., Gorte R.J. Recent progress in SOFC anodes for direct utilization of hydrocarbons. J. Mater. Chem. 2007, 17:3071-3077.
166. McIntosh S., Gorte R.J. Direct hydrocarbon solid oxide fuel cells. Chem. Rev. 2004, 104:4845-4865.
167. '1-10kW Stationary Combined Heat and Power Systems Status and Technical Potential' Independent Review published for US-DOE Hydrogen and Fuel cell program - National Renewable Energy Laboratory 2010, NRL/BK-6A10-48265. Available at. https://www1.eere.energy.gov/hydrogenandfuelcells/pdfs/48265.pdf.
168. Nakabaru H.M. Status of National Project SOFC Development in Japan. Electrochem. Soc. Transac. 2009, 25:11-20.
169. Blum L., Packbier U., Vinke I.C., de Haart L.G.J. Long-term testing of SOFC stacks at Forschungszentrum Julich. Fuel Cells 2013, 13:646-653.
170. Wachsman E.D., Lee K.T. Lowering the temperature of solid oxide fuel cells. Science 2011, 334:935-939.
171. Shi Y., Cai N., Li C., Bao C., Croiset E., Qian J., Hu Q., Wang S. Modeling of an anode-supported Ni-YSZ/Ni-ScSZ/ScSZ/LSM-ScSZ multiple layers SOFC cell. Part I: Experiments, model development and validation. J. Power Sources 2007, 172:235-245.
172. Shi Y., Cai N., Li C., Bao C., Croiset E., Qian J., Hu Q., Wang S. Modeling of an anode-supported Ni-YSZ/Ni-ScSZ/ScSZ/LSM-ScSZ multiple layers SOFC cell. Part II: Simulations and discussion. J. Power Sources 2007, 172:246-252.
173. Bertei A., Nucci B., Nicolella C. Engineered electrode microstructure for optimisation of solid oxide fuel cells. Chem. Eng. Transac. 2013, 32:2293-2298.
174. Wincewicz K.C., Cooper J.S. Taxonomies of SOFC material and manufacturing alternatives. J. Power Sources 2005, 140:280-296.
175. Tietz F., Buchkremer H.-P., Stöver D. Components manufacturing for solid oxide fuel cells. Solid State Ionics 2002, 152-153:373-381.
176. Williams M.C., Strakey J.P., Surdoval W.A., Wilson L.C. Solid oxide fuel cell technology development in the U.S. Solid State Ionics 2006, 177:2039-2044.
177. Lefebvre-Joud F., Gauthier G., Mougin J. Current status of proton-conducting solid oxide fuel cells development. J. Appl. Electrochem. 2009, 39:535-543.
178. Mogensen M., Sammes N.M., Tompsett G.A. Physical, chemical and electrochemical properties of pure and doped ceria. Solid State Ionics 2000, 129:63-94.
179. 2-y/2 electrolytes for IT-SOFC operation at 500°C. Solid State Ionics 2000, 129:95-110.
180. Lu C., Worrell W.L., Gorte R.J., Vohs J.M. SOFCs for direct oxidation of hydrocarbon fuels with samaria-doped ceria electrolyte. J. Electrochem. Soc. 2003, 150:A354-A358.
181. Zhan Z., Barnett S.A. Operation of ceria-electrolyte solid oxide fuel cells on iso-octane-air fuel mixtures. J. Power Sources 2006, 157:422-429.
182. Jia L., Tian Y., Liu Q., Xia C., Yu J., Wang Z., Zhao Y., Li Y. A direct carbon fuel cell with (molten carbonate)/(doped ceria) composite electrolyte. J. Power Sources 2010, 195:5581-5586.
183. Maguire E., Gharbage B., Marques F.M.B., Labrincha J.A. Cathode materials for intermediate temperature SOFCs. Solid State Ionics 2000, 127:329-335.
184. Murray E.P., Tsai T., Barnett S.A. A direct-methane fuel cell with a ceria-based anode. Nature 1999, 400:649-651.
185. Chatterjee P., Biswas S. Development of chromium barrier coatings for solid oxide fuel cells. Int. J. Hydrogen Enenrg. 2011, 36:4530-4539.
186. Shuler J.A., Gehrig C., Wuillemin Z., Schuler A.J., Wochele J., Ludwig C., Hessler-Wyserb A., Van herle J. Air side contamination in solid oxide fuel cell stack testing. J. Power Sources 2011, 196:7225-7231.
187. Mogensen M., Kammer K. Conversion of hydrocarbons in solid oxide fuel cells. Annu. Rev. Mater. Res. 2003, 33:321-331.
188. Yang L., Choi Y., Qin W., Chen H., Blinn K., Liu M., Liu P., Bai J., Tyson T.A., Liu M. Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells. Nat. Commun. 2011, 2:357.
189. Putna E.S., Stubenrauch J., Vohs J.M., Gorte R.J. Ceria-based anodes for the direct oxidation of methane in solid oxide fuel cells. Langmuir 1995, 11:4832-4837.
190. Atkinson A., Barnett S., Raymond J., Gorte, Irvine J.T.S., McEvoy A.J., Mogensen M.B., Singhal S., Vohs J.M. Advanced anodes for high-temperature fuel cells. Nat. Mater. 2004, 3:17-27.
191. Jiang Y., Virkar A.V. Fuel composition and diluent effects on gas transport and performance of anode-supported SOFCs. J. Electrochem. Soc. 2003, 150:A942-A951.
192. Liu J., Barnett S.A. Operation of anode-supported solid oxide fuel cells on methane and natural gas. Solid State Ionics 2003, 158:11-16.
193. Fergus J.W. Metallic interconnect for solid oxide fuel cells. Mat. Sci. Eng. A 2005, 397:271-283.
194. Mengel S., Girdauskaite E., Sauchuk V., Kusnezoff M., Michaelis A. Area specific resistance of oxide scales grown on ferritic alloys for solid oxide fuel cell interconnects. J. Power Sources 2011, 196:7136-7143.