Fabrication and characterization of micro PEM fuel cells using pyrolyzed carbon current collector plates

Journal of Power Sources

Volumn 195, Issue 15, 2010, Pages 4796-4803

  Wang, Yun ^a   Pham, Liem ^a   Vasconcellos, Guilherme Porto Salerno de ^a   Madou, Marc ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b University of California at Irvine   (United States)

Author keywords

PEMFC; Bipolar plate; Carbon; Polymer electrolyte fuel cell; Pyrolysis

Indexed keywords

ACTIVE SURFACES; ASSEMBLY TECHNIQUES; BIPOLAR PLATE; BIPOLAR PLATES; CARBON POLYMERS; CURRENT COLLECTOR; ENDPLATES; FABRICATION TECHNIQUE; GAS DIFFUSION LAYERS; HIGH TEMPERATURE; INERT ATMOSPHERES; MAXIMUM POWER DENSITY; MICRO PROTON EXCHANGE MEMBRANE FUEL CELL; PEM FUEL CELL; POLYMER MANUFACTURING; POLYMER SHEET; PYROLYSIS TEMPERATURE; PYROLYZED CARBON; PYROLYZING; TRANSIENT CHARACTERISTIC;

CELLS; CYCLIC VOLTAMMETRY; DIFFUSION IN GASES; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; ELECTROLYTIC REDUCTION; FABRICATION; INTERNET PROTOCOLS; POLYELECTROLYTES; POLYMERS; PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC); PYROLYSIS;

PLATES (STRUCTURAL COMPONENTS);

EID: 77950369028     PISSN: 03787753     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jpowsour.2010.02.050     Document Type: Article

References (47)

1. Perry M.L., and Fuller T.F. J. Electrochem. Soc. 149 (2002) S59-S67
2. Larminie J., and Dicks A. Fuel Cell Systems Explained. 2nd edition (2003), John Wiley & Sons
3. Wang C.Y. Chem. Rev. 104 (2004) 4727-4765
4. Costamagna P., and Srinivasan S. J. Power Sources 102 (2001) 242-252
5. Costamagna P., and Srinivasan S. J. Power Sources 102 (2001) 253-269
6. Roβberg K., and Trapp V. Handbook of Fuel Cells-Fundamentals, Technology and Applications (2003), John Wiley & Sons, Ltd., New York pp. 308-314
7. Wind J., LaCroix A., Braeuninger S., Hedrich P., Heller C., and Schudy M. Handbook of Fuel Cells-Fundamentals, Technology and Applications (2003), John Wiley & Sons, Ltd., New York pp. 295-307
8. Meyers J.P., and Maynard H.L. J. Power Sources 109 (2002) 76-88
9. Lee S.J., Chen Y.P., and Huang C.H. J. Power Sources 145 (2005) 369-375
10. Ito T., Kaneko S., and Kunimatsuz M. Electrochem. Solid-State Lett. 12 (2009) B154-B157
11. Yen T.J., Fang N., Zhang X., Lu G.Q., and Wang C.Y. Appl. Phys. Lett. 83 (2003) 19
12. Hayase M., Kawase T., and Hatsuzawa T. Electrochem. Solid-State Lett. 7 8 (2004) A231-A234
13. Brito-Neto J.G.A., Kondo K., and Hayase M. J. Electrochem. Soc. 155 (2008) D78-D82
14. Modroukas D., Modi V., and Frechette L. J. Micromech. Microeng. 15 (2005) S193-S201
15. Cohen J.L., Westly D.A., Pechenik A., and Abruna H.D. J. Power Sources 139 (2005) 96-105
16. Bazylak A., Sinton D., and Djilali N. J. Power Sources 143 (2005) 57-66
17. Hasegawa, Shimotani K., Kishi K., and Watanabe H. Electrochem. Solid-State Lett. 8 (2005) A119-A121
18. Choban E.R., Waszczuk P., and Kenis P.J. Electrochem. Solid-State Lett. 8 (2005) A348-A352
19. Hayase M., Kawase T., and Hatsuzawa T. Electrochem. Solid State Lett. 7 (2004) A231
20. Hahn R., Wagner S., Schmitz A., and Reichl H. J. Power Sources 131 (2004) 73-78
21. Hsieh S.S., Huang C.F., Kuo J.K., Tsai H.H., and Yang S.H. J. Solid State Electrochem. 9 (2005) 121-131
22. Cha S.W., O'Hayre R., Saito Y., and Prinz F.B. J. Power Sources 134 (2004) 57-71
23. Park B.Y., and Madou M.J. J. Power Sources 162 (2006) 369-379
24. Lin P.-C., Park B.Y., and Madou M.J. J. Power Sources 176 (2008) 207-214
25. Wilkison D.P., and Vanderleeden O. In: Vielstich W., Gasteiger H., and Lamm A. (Eds). Handbook of Fuel Cells: Fundamentals, Technology and Applications, vol. 3, Ch. 27 (2003), John Wiley & Sons, Ltd.
26. Nguyen T.V., and He W. In: Vielstich W., Gasteiger H., and Lamm A. (Eds). Handbook of Fuel Cells: Fundamentals, Technology and Applications, vol. 3, Ch. 28 (2003), John Wiley & Sons, Ltd.
27. Li X., and Sabir I. Int. J. Hydrogen Energy 30 4 (2005) 359-371
28. Wang Y., Basu S., and Wang C.-Y. Modeling two-phase flow in PEM fuel cell channels. J. Power Sources 179 (2008) 603-617
29. Wang Y. J. Electrochem. Soc. 156 10 (2009) B1124-B1133
30. Mathias M., Roth J., Fleming J., and Lehnert W. In: Vielstich W., Gasteiger H., and Lamm A. (Eds). Handbook of Fuel Cells: Fundamentals, Technology and Applications, vol. 3 (2003), John Wiley & Sons, Ltd.
31. Ralph T.R., Hards G.A., Keating J.E., Campbell S.A., Wilkinson D.P., Davis M., St-Pierre J., and Johnson M.C. J. Electrochem. Soc. 144 11 (1997) 3845
32. Williams M.V., Begg E., Bonville L., Kunz H.R., and Fenton J.M. J. Electrochem. Soc. 151 (2004) A1173
33. Frey T., and Linardi M. Electrochim. Acta 50 1 (2004) 99
34. Wang Y., Wang C.Y., and Chen K.S. Electrochim. Acta 52 (2007) 3965-3975
35. Zhang J. PEM Fuel Cell Electrocatalysts and Catalyst Layers Fundamentals and Applications (2008), Springer
36. Rabat H., and Brault P. Fuel Cells 2 (2008) 81
37. Xiong L., and Manthiram A. Electrochim. Acta 50 (2005) 3200
38. Wang Y., and Xuhui Feng. J. Electrochem. Soc. 155 12 (2008) B1289-B1295
39. Yoon Y.-G., Yang T.-H., Park G.-G., Lee W.-Y., and Kim C.-S. J. Power Sources 118 (2003) 189-192
40. Mukherjee P.P., and Wang C.Y. J. Electrochem. Soc. 154 (2007) B1121
41. Wang Y., and Feng X. J. Electrochem. Soc. 156 3 (2009) B403-B409
42. Nguyen N.T., and Chan S.H. J. Micromech. Microeng. 16 (2006) R1
43. Chan S.H., Nguyen N.T., Xia Z., and Wu Z.G. J. Micromech. Microeng. 15 (2005) 231
44. Müller M.A., Müller C., Gromball F., Wöfle M., and Menz W. Microsyst. Technol. 9 (2003) 159
45. Yeom J., Mozsgai G.Z., Flachsbart B.R., Choban E.R., Asthana A., Shannon M.A., and Kenis P.J.A. Sens. Actuators B 107 (2005) 882
46. Heinzel A., Hebling C., Müller M., Zedda M., and Müller C. J. Power Sources 105 (2002) 250
47. Wang Y., and Wang C.Y. Electrochim. Acta 51 (2006) 3924-3933