Nanostructured materials for advanced energy conversion and storage devices

Nature Materials

Volumn 4, Issue 5, 2005, Pages 366-377

  Aricò, Antonino Salvatore ^a   Bruce, Peter ^b   Scrosati, Bruno ^c   Tarascon, Jean Marie ^d   Van Schalkwijk, Walter ^e  

^a CNR ITAE   (Italy)

^b UNIVERSITY OF ST ANDREWS   (United Kingdom)

^c SAPIENZA UNIVERSITY OF ROME   (Italy)

^d UNIVERSITÉ DE PICARDIE JULES VERNE   (France)

^e EnergyPlex Corporation   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CAPACITORS; ELECTRIC VEHICLES; ELECTROCHEMISTRY; ELECTRODES; ELEMENTARY PARTICLES; ENERGY STORAGE; FUEL CELLS; LITHIUM BATTERIES; NANOSTRUCTURED MATERIALS; SYNTHESIS (CHEMICAL);

ENERGY DEVICES; NANOELECTROLYTES; STORAGE DEVICES; SUPERCAPACITORS;

ENERGY CONVERSION;

EID: 17644387736     PISSN: 14761122     EISSN: None     Source Type: Journal    
DOI: 10.1038/nmat1368     Document Type: Review

References (103)

1. Nazar, L. F. et al. Nanostructured materials for energy storage. Int. J. Inorg. Mater. 3, 191-200 (2001).
2. Hirshes, M. Nanoscale materials for energy storage. Mater. Sci. Eng. B 108, 1 (2004).
3. Scrosati, B. Challenge of portable power. Nature 373, 557-558 (1995).
4. Tarascon, J.-M. & Armand, M. Issues and challenges facing rechargeable batteries. Nature 414, 359-367 (2001).
5. Wakihara, W. & Yamamoto, O. (eds) Lithium Ion Batteries - Fundamentals and Performance (Kodansha-Wiley-VCH, Weinheim, 1998).
6. Van Schalkwijk, W. & Scrosati, B. (eds) Advance in Lithium-Ion Batteries (Kluwer Academic/Plenum, New York, 2002).
7. Huggins, R. A. in Handbook of Battery Materials (ed. Besenhard, J. O.) Part III, Chapter 4 (Wiley-VCH, Weinheim, 1999).
8. Winter, M. & Besenhard, J. O. Electrochemical lithiation of tin and tin-based intermetallic and composites. Electrochim. Acta 45, 31-50 (1999).
9. Nazar, L. F. & Crosnier, O. In Lithium Batteries Science and Technology (eds Nazri,G.-A. & Pistoia, G.) 112-143 (Kluwer Academic/Plenum, Boston, 2004).
10. Idota, Y., Kabuto, T., Matsufuji, A., Maekawa, Y. & Miyasaki, T. Tin-based amorphous oxides: a high-capacity lithium-ion storage material. Science 276, 1395- 1397 (1997).
11. Mao, O. & Dahn,J. R. Mechanically alloyed Sn-Fe(-C.) powders as anode material. Science 276, 1395-1397 (1997).
12. Beaulieu, L. Y. & Dahn, J. R. The reaction of lithium with Sn-Mn-C intermetallics prepared by mechanical alloying. J. Electrochem. Soc. 147, 3237-3241(2000).
13. Graetz, J., Ahn, C. C., Yazami, R. & Fuetz, B. Highly reversible lithium storage in nanostructured silicon. Electrochem. Solid-State Lett. 6, A194-197 (2003).
14. Yang, J. et al. Si/C composites for high capacity lithium storage materials. Electrochem. Solid-State Lett. 6, A154-156 (2003).
15. Novak, P. et al. in Int. Meeting Li Batteries IMLB12 Nara, Japan Abstract 9 (2004).
16. Ikeda, H. et al. in Proc. 42nd Battery Symposium, Yokohama, Japan Abstract 9 (2004).
17. Green, M., Fielder, E., Scrosati, B., Wachtler, M. & Serra Moreno, J. Structured silicon anodes for lithium battery applications. Electrochem. Solid-State Lett. 6, A75-79 (2003).
18. 2-B nanowires. Adv. Mater. (in the press).
19. Poizot, P., Laruelle, S., Grugeon, S., Dupont, L. & Tarascon, J.-M. Nano-sized transition metal oxides as negative electrode" material for lithium-ion batteries. Nature 407, 496-499 (2000).
20. Tarascon, J.-M., Grugeon, S., Laruelle, S., Larcher, D. & Poizot, P. In Lithium Batteries Science and Technology (eds Nazri, G.-A. & Pistoia, G.) Ch. 7, 220-246 (Kluwer Academic/plenum, Boston, 2004).
21. Denis, S., Baudrin, E., Touboul, M. & Tarascon, J.-M. Synthesis and electrochemical properties vs. Li of amorphous vanadates of general formula RVO (R = In, Cr, Fe, Al, Y) J. Electrochem. Soc. 144, 4099-4109 (1997).
22. Leroux, F., Coward, G. R., Power, W. P. & Nazar, L. F. Understanding the nature of low-potential Li uptake into high volumetric capacity molybedenum oxides. Electrochem Solid-State Lett. 1, 255-258 (1998).
23. 2 with high capacity. Adv. Funct. Mater. 13, 621-625 (2003).
24. Badway, F., Cosandey, F., Pereira, N. & Amatucci, G. G. Carbon metal fluoride nanocomposites: high capacity reversible metal fluoride conversion materials as rechargeable positive electrodes for Li batteries. J. Electrochem. Soc. 150, A1318-1327 (2003).
25. Li, H., Ritcher, G. & Maier, J. Reversibile formation and decomposition of LiF clusters using transition metal fluorides as precursors and their application in rechargeable Li batteries. Adv. Mater. 15, 736-739 (2003).
26. Jamnik, J, & Maier, J. Nanocrystallinity effects in lithium battery materials. Aspects of nano-ionics. Part IV. Phys. Chem. Chem. Phys. 5, 5215-5220 (2003).
27. 3. J. Electrochem. Soc. 150, A133-139 (2003).
28. Sides, C. R., Li, N. C., Patrissi, C. J., Scrosati, B. & Martin, C. R. Nanoscale material for lithium-ion batteries. Mater. Res. Bull. 27, 604-607 (2002).
29. Nordliner, S., Edström, K. & Gustafsson, T. Electrochemistry of vanadium oxide nanotubes. Electrochem. Solid State Lett. 4, A129 (2001).
30. 5 aerogel intercalation electrodes. J. Electrochem. Soc. 143, 2099-2104 (1996).
31. Dong, W., Rolison, D. R. & Dunn, B. Electrochemical properties of high surface area vanadium oxides aerogels. Electrochem. Solid State Lett. 3, 457-459 (2000).
32. Thackeray, M. M., David, W. I. F., Bruce, P. G. & Goodenough, J. B. Lithium insertion into manganese spinels. Mater. Res. Bull. 18, 461-472 (1983).
33. 1 intercalation electrodes: influence of ion exchange on capacity and structure upon cycling. Chem. Mater. 13, 2380-2386 (2001).
34. 2 electrodes by electron diffraction and lattice imaging. J. Electrochem. Soc. 146, 2404-2412 (1999).
35. Wang, H. F., Jang, Y. I. & Chiang, Y.-M. Origin of cycling stability in monoclinic and orthorhombic-phase lithium manganese oxide cathodes. Electrochem. Solid-State Lett. 2, 490-493 (1999).
36. Kang, S. H., Goodenough, J. B. & Rabenberg, L. K. Effect of ball-milling on 3 V capacity of lithium manganese oxospinel cathodes. Chem. Mater. 13, 17511-1764 (2001).
37. 2. Electrochem. Solid-State Lett. 4, A78-81 (2001).
38. 2+ redox couple in iron phosphates, J. Electrochem. Soc. 144, 1609-1613 (1997).
39. Ravet, A. et al. Electroactivity of natural and synthetic triphylite, J. Power Sources 97-98, 503-507 (2001).
40. 4 at room temperature and high rates. Electrochem. Solid-State Lett. 4, A170-172 (2001).
41. Croce, F., Scrosati, B., Sides, B. R. & Martin, C. R. in 206th Meeting Electrochemical Society, Honolulu, Hawaii Abstract 241(2004).
42. Scrosati, B. & Vincent, C. A. Polymer electrolytes: the key to lithium polymer batteries, Mater. Res. Soc. Bull. 25, 28-30 (2000).
43. Croce, F., Appetecchi, G. B., Persi, L. & Scrosati, B. Nanocomposite polymer electrolytes for lithium batteries. Nature 394, 456-458 (1998).
44. MacFarlane, D. R., Newman, P. J., Nairn, K. M. & Forsyth, M. Lithium-ion conducting ceramic/polyether composites. Electrochim. Acta 43, 1333-1337 (1998).
45. Kumar, B., Rodrigues, S. J. & Scanlon, L. Ionic conductivity of polymer-ceramic composites. J. Electrochem. Soc. 148, A1191-1195 (2001).
46. Maier, J. Ionic conduction in space charge regions. Prog. Solid State Chem. 23, 171-263 (1995).
47. Appetecchi, G. B., Croce, F., Persi, L., Ronci, F. & Scrosati, B. Transport and interfacial properties of composite polymer electrolytes, Electrochim Acta 45, 1481-1490 (2000).
48. Angell, C. A., Liu, C. & Sanchez, S. Rubbery solid electrolytes with dominant cationic transport and high ambient conductivity. Nature 362, 137-139(1993).
49. Hawett, P. C., MacFarlane, D. R. & Hollenkamp, A. F. High lithium metal cycling efficiency in a room-temperature ionic liquid. Electrochem. Solid-State Lett. 7, A97-101 (2004).
50. 6. Nature, 398, 792-794 (1999).
51. Gadjourova, Z., Andreev, Y. G., Tunstall D. P. & Bruce, P. G. Ionic conductivity in crystalline polymer electrolytes. Nature 412, 520-523 (2001).
52. 6, X = P. As, Sb. J. Am. Chem. Soc. 125, 4619-2626 (2003).
53. Christie, A. M., Lilley, S. J., Staunton, E, Andrew, Y. G. & Bruce, P. G. Increasing the conductivity of crystalline polymer electrolytes. Nature 433, 50-53 (2005).
54. Conway, B. E. Electrochemical Supercapacitors. (Kluwer Academic/Plenum, New York, 1999).
55. Mastragostino, M., Arbizzani, C. & Soavi, F. In Advances in Lithium-Ion Batteries. (Van Schalkwijk, W. & Scrosati, B., eds) Ch. 16, 481-505 (Kluwer Academic/Plenum, New York, 2002).
56. Arbizzani, C., Mastragostino, M. & Soavi, S. New trends in electrochemical supercapacitors. J. Power Sources 100, 164-170 (2001).
57. Wang, J. et al. Morphological effects on the electrical and electrochemical properties of carbon aerogels. J. Electrochem. Soc. 148, D75-77 (2001).
58. Niu, C., Sichjel, E. K., Hoch, K., Hoi, D. & Tennent, H. High power electrochemical capacitors based on carbon nanotube electrodes. Appl. Phys. Lett. 70, 1480-1482 (1997).
59. Nelson, P. A. & Owen, J. R. A high-performance supercapacitor/ battery hybrid incorporating templated mesoporous electrodes. J. Electrochem. Soc. 150, A1315-1317 (2003).
60. Amatucci, G. G., Badway, F., Du Pasquier, A. & Zheng, T. An asymmetric hybrid nonaqueous energy storage cell. J. Electrochem. Soc. 148, A930-939 (2001).
61. Brodd, R. J. et al. Batteries 1977 to 2002. J. Electrochem. Soc 151, K1-11 (2004).
62. Srinivasan, S., Mosdale, R., Stevens, P. & Yang, C. Fuel cells: reaching the era of clean and efficient power generation in the twenty-first century. Annu. Rev. Energy Environ. 24, 281-238 (1999).
63. Giordano, N. et al. Analysis of platinum particle size and oxygen reduction in phosphoric acid. Electrochem. Acta 36, 1979-1984 (1991).
64. Freund, A., Lang, J., Lehman, T. & Starz, K. A. Improved Pt alloy catalysts for fuel cells. Catal. Today 27, 279-283 (1996).
65. Mukerjee, S., Srinivasan, S., Soriaga, M. P. & McBreen, J. Role of structural and electronic properties of Pt and Pt alloys on electrocatalysis of oxygen reduction. An in-situ XANES and EXCAFS investigation. J. Electrochem. Soc. 142, 1409-1422 (1995).
66. Aricò, A. S., Srinivasan, S. & Antonucci, V. DMFCs: From fundamental aspects to technology development. Fuel Cells 1, 133-161 (2001).
67. 2 electrooxidation: stripping voltammetry and rotating-disk measurements. Langmuir, 14, 2591-2595 (1997).
68. Chrzanowski, W. & Wieckowski, A. Enhancement in methanol oxidation by spontaneously deposited ruthenium on low-index platinum-electrodes. Catal. Lett. 50, 69-75 (1998).
69. Brankovic, S. R., Wang, J. X. & Adzic, R. R. Pt submonolayers on Ru nanoparticles-a novel low Pt loading, high CO tolerance fuel-cell electrocatalyst. Electrochem. Solid-State Lett. 4, A217-220 (2001).
70. Hockaday, R. G. et al. in Proc. Fuel Cell Seminar, Portland, Oregon, USA 791-794 (Courtesy Associates, Washington DC, 2000).
71. Sun, G. R., Wang, J. T.& Savinell, R. F. Iron(III) tetramethoxyphenylporphyrin (Fetmpp) as methanol tolerant electrocatalyst for oxygen reduction in direct methanol fuel-cells. J. Appl. Electrochem. 28, 1087-1093 (1998).
72. Reeve, R. W., Christensen, P. A., Hamnett, A., Haydock, S. A. & Roy, S. C. Methanol tolerant oxygen reduction catalysts based on transition metal Sulfides. J. Electrochem. Soc. 145, 3463-3471 (1998).
73. Nolte, R., Ledjeff, K., Bauer, M. & Mulhaupt, R. Partially sulfonated poly(arylene ether sulfone) - a versatile proton conducting membrane material for modern energy conversion technologies. J. Membrane Sci. 83, 211-220 (1993).
74. Kerres, J., Ulrich, A., Meier, F. & Haring, T. Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells. Solid State Ionics 125, 243-249 (1999).
75. Alberti, G. & Cisciola, M. Composite membranes for medium-temperature PEM fuel cells. Annu. Rev. Mater. Res. 33, 129-154 (2003).
76. Savidogo, O. Emerging membranes for electrochemical systems: (I) solid polymer electrolyte membranes for fuel cell systems. J. New Mater. Electrochem. Syst. 1, 47-66 (1998).
77. Li, Q., He, R., Jensen, J. O. & Bjerrum, N. J. Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100°C. Chem. Mater. 15, 4896-4815 (2003).
78. Kreuer, K. D. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells. J. Membrane Sci. 185, 29-39 (2001).
79. Watanabe, M., Uchida, H., Seki, Y., Emori, M. & Stonehart, P. Self-humidifying polymer electrolyte membranes for fuel cells. J. Electrochem. Soc. 143, 3847-3852 (1996).
80. Aricò, A. S., Creti, P., Antonucci, P. L. & Antonucci, V. Comparison of ethanol and methanol oxidation in a liquid feed solid polymer electrolyte fuel cells at high temperature. Electrochem. Solid-State Lett. 1, 66-68 (1998).
81. Aricò, A. S., Baglio, V., Di Blasi, A. & Antonucci, V. FTIR spectroscopic investigation of inorganic fillers for composite DMFC membranes. Electrochem. Commun. 5, 862-866 (2003).
82. Kreuer, K. D., Paddison, S. J., Spohr, E. & Schuster, M. Transport in proton conductors for fuel cell applications: simulation, elementary reactions and phenomenology. 104, 4637-4678 (2004).
83. Kreuer, K. D. On the development of proton conducting materials for technological applications. Solid State Ionics 97, 1-15 (1997).
84. Debe, M. K. Handbook of Fuel Cells - Fundamentals, Technology and Applications Vol. 3 (eds Vielstich, W., Gasteiger, H. A. & Lamm, A.) Ch. 45, 576-589 (Wiley, Chichester, UK, 2003).
85. Atanasoski, R. in 4th Int. Conf. Applications of Conducting Polymers, ICCP-4, Como, Italy Abstract 22 (2004).
86. Schoonman, J. Nanoionics. Solid State Ionics 157, 319-326 (2003).
87. Steele, B. C. H. Current status of intermediate temperature fuel cells (It-SOFCs). European Fuel Cell News 7, 16-19 (2000).
88. Maier, J. Defect chemistry and ion transport in nanostructured materials. Part II Aspects of nanoionics. Solid State Ionics 157, 327-334 (2003).
89. Knauth, P & Tuller, H. L. Solis-state ionics: roots, status, and future-prospects. J. Am. Ceram Soc. 85, 1654-1680 (2002).
90. Perry Murray, E., Tsai, T.& Barnett, S. A. A direct-methane fuel cell with a ceria-based anode. Nature 400, 649-651 (1999).
91. Park, S., Vohs, J. M. & Gorte, R. J. Direct oxidation of hydrocarbons in a solid-oxide fuel cell. Nature 404, 265-267 (2000).
92. Zhou, Y. P., Feng, K., Sun, Y. & Zhou, L. A brief review on the study of hydrogen storage in terms of carbon nanotubes. Prog. Chem. 15, 345-350 (2003).
93. Schlappach, L. & Zuttel, A. Hydrogen-storage materials for mobile applications. Nature 414, 353-358 (2001).
94. Dillon A. C. et al. Storage of hydrogen in single-walled carbon nanotubes. Nature 386, 377-379 (1997).
95. Chambers, A., Park, C., Baker, R. T. K. & Rodriguez, N. M. Hydrogen storage in graphite nanofibers. J. Phys. Chem. 102, 4253-4256 (1998).
96. Yang, R. T. Hydrogen storage by alkali-doped carbon nanotubes - revisited. Carbon 38, 623-626 (2000).
97. Dillon, A. C.& Heben, M. J. Hydrogen Storage using carbon adsorbents - past, present and future. Appl. Phys. A 72, 133-142 (2001).
98. Hirscher, M. & Becher, M. Hydrogen storage in carbon nanotubes. J. Nanosci. Nanotechnol. 3, 3-17 (2003).
99. 2-M systems (M-Al, Ti, Fe, Ni, Cu, and Nb) for hydrogen storage. Int. J. Hydroge Energy 29, 73 -80 (2004).
100. 2Ni-10 wt.% V. J. Alloys Compounds 356, 593-597 (2003).
101. Ma, R. Z. et al. Synthesis of boron-nitride nanofibers and measurement of their hydrogen uptake capacity. Appl. Phys. Lett. 81, 5225-5227 (2002).
102. 3to magnesium for improvement of the hydrogen sorption properties. J. Alloys Compounds 351, 217-221 (2003).
103. Audemer, A., Wurm, C., Morcrette, M., Gwizdala, S. & Masquellier, C. Carbon-coated metal bearing powders and process for production thereof. World Patent WO 04/001881 A2 (2004).