Wireless power transfer for electric vehicle applications

IEEE Journal of Emerging and Selected Topics in Power Electronics

Volumn 3, Issue 1, 2015, Pages 4-17

  Li, Siqi ^a   Mi, Chunting Chris ^b  

^a KUNMING UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b Department of Electrical and Computer Engineering   (United States)

Author keywords

Dynamic charging; electric vehicle (EV); inductive power transfer (IPT); safety guidelines; stationary charging; wireless power transfer (WPT)

Indexed keywords

CHARGING TIME; ELECTRIC VEHICLES; ENERGY TRANSFER; MAGNETIC RESONANCE; WIRELESS CHARGING;

BATTERY TECHNOLOGY; EV WIRELESS CHARGING; INDUCTIVE POWER TRANSFER; INDUCTIVE POWERTRANSFER (IPT); MARKET PENETRATION; SAFETY GUIDELINES; VEHICLE APPLICATIONS; WIRELESS POWER TRANSFER (WPT);

INDUCTIVE POWER TRANSMISSION;

EID: 84922331697     PISSN: 21686777     EISSN: 21686785     Source Type: Journal    
DOI: 10.1109/JESTPE.2014.2319453     Document Type: Article

References (116)

1. S. J. Gerssen-Gondelach and A. P. C. Faaij, "Performance of batteries for electric vehicles on short and longer term," J. Power Sour., vol. 212, pp. 111-129, Aug. 2012.
2. V. Etacheri, R. Marom, R. Elazari, G. Salitra, and D. Aurbach, "Challenges in the development of advanced Li-ion batteries: A review," Energy Environ. Sci., vol. 4, no. 9, pp. 3243-3262, 2011.
3. A. K. A. Kurs, R. Moffatt, J. D. Joannopoulos, P. Fisher, and M. Soljacic, "Wireless power transfer via strongly coupled magnetic resonances," Science, vol. 317, no. 5834, pp. 83-86, 2007.
4. A. P. Sample, D. A. Meyer, and J. R. Smith, "Analysis, experimental results, and range adaptation of magnetically coupled resonators for wireless power transfer," IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 544-554, Feb. 2011.
5. B. L. Cannon, J. F. Hoburg, D. D. Stancil, and S. C. Goldstein, "Magnetic resonant coupling as a potential means for wireless power transfer to multiple small receivers," IEEE Trans. Power Electron., vol. 24, no. 7, pp. 1819-1825, Jul. 2009.
6. A. Kurs, R. Moffatt, and M. Soljacic, "Simultaneous mid-range power transfer to multiple devices," Appl. Phys. Lett., vol. 96, no. 4, pp. 044102-1-044102-3, 2010.
7. C. Sanghoon, K. Yong-Hae, S.-Y. Kang, L. Myung-Lae, L. Jong-Moo, and T. Zyung, "Circuit-model-based analysis of a wireless energytransfer system via coupled magnetic resonances," IEEE Trans. Ind. Electron., vol. 58, no. 7, pp. 2906-2914, Jul. 2011.
8. C. Kainan and Z. Zhengming, "Analysis of the double-layer printed spiral coil for wireless power transfer," IEEE J. Emerg. Sel. Topics Power Electron., vol. 1, no. 2, pp. 114-121, Jul. 2013.
9. Z. Yiming, Z. Zhengming, and C. Kainan, "Frequency decrease analysis of resonant wireless power transfer," IEEE Trans. Power Electron., vol. 29, no. 3, pp. 1058-1063, Mar. 2014.
10. L. C. Kwan, W. X. Zhong, and S. Y. R. Hui, "Effects of magnetic coupling of nonadjacent resonators on wireless power domino-resonator systems," IEEE Trans. Power Electron., vol. 27, no. 4, pp. 1905-1916, Apr. 2012.
11. W. X. Zhong, L. C. Kwan, and S. Y. Hui, "Wireless power dominoresonator systems with noncoaxial axes and circular structures," IEEE Trans. Power Electron., vol. 27, no. 11, pp. 4750-4762, Nov. 2012.
12. Y. Nagatsuka, N. Ehara, Y. Kaneko, S. Abe, and T. Yasuda, "Compact contactless power transfer system for electric vehicles," in Proc. IPEC, Jun. 2010, pp. 807-813.
13. J. G. Bolger, F. A. Kirsten, and L. S. Ng, "Inductive power coupling for an electric highway system," in Proc. 28th IEEE Veh. Technol. Conf., Mar. 1978, pp. 137-144.
14. M. Eghtesadi, "Inductive power transfer to an electric vehicleanalytical model," in Proc. IEEE 40th Veh. Technol. Conf., May 1990, pp. 100-104.
15. A. W. Green and J. T. Boys, "10 kHz inductively coupled power transfer-concept and control," in Proc. 5th Int. Conf. Power Electron. Variable-Speed Drives, Oct. 1994, pp. 694-699.
16. K. W. Klontz, D. M. Divan, D. W. Novotny, and R. D. Lorenz, "Contactless power delivery system for mining applications," IEEE Trans. Ind. Appl., vol. 31, no. 1, pp. 27-35, Jan./Feb. 1995.
17. J. M. Barnard, J. A. Ferreira, and J. D. Van Wyk, "Sliding transformers for linear contactless power delivery," IEEE Trans. Ind. Electron., vol. 44, no. 6, pp. 774-779, Dec. 1997.
18. N. H. Kutkut and K. W. Klontz, "Design considerations for power converters supplying the SAE J-1773 electric vehicle inductive coupler," in Proc. 12th Annu. APEC and Expo., vol. 2. Feb. 1997, pp. 841-847.
19. D. A. G. Pedder, A. D. Brown, and J. A. Skinner, "A contactless electrical energy transmission system," IEEE Trans. Ind. Electron., vol. 46, no. 1, pp. 23-30, Feb. 1999.
20. H. Abe, H. Sakamoto, and K. Harada, "A noncontact charger using a resonant converter with parallel capacitor of the secondary coil," IEEE Trans. Ind. Electron., vol. 36, no. 2, pp. 444-451, Mar./Apr. 2000.
21. J. T. Boys, G. A. Covic, and A. W. Green, "Stability and control of inductively coupled power transfer systems," Proc. IEE Electr. Power Appl., vol. 147, no. 1, pp. 37-43, Jan. 2000.
22. A. P. Hu, J. T. Boys, and G. A. Covic, "ZVS frequency analysis of a current-fed resonant converter," in Proc. 7th IEEE Int. Power Electron. Congr., Oct. 2000, pp. 217-221.
23. W. Chwei-Sen, G. A. Covic, and O. H. Stielau, "Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems," IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 148-157, Feb. 2004.
24. J. T. Boys, G. A. Covic, and X. Yongxiang, "DC analysis technique for inductive power transfer pick-ups," IEEE Power Electron. Lett., vol. 1, no. 2, pp. 51-53, Jun. 2003.
25. J. Hirai, K. Tae-Woong, and A. Kawamura, "Study on intelligent battery charging using inductive transmission of power and information," IEEE Trans. Power Electron., vol. 15, no. 2, pp. 335-345, Mar. 2000.
26. S. Byeong-Mun, R. Kratz, and S. Gurol, "Contactless inductive power pickup system for Maglev applications," in Proc. Conf. Rec. Ind. Appl. Conf., 37th IAS Annu. Meeting, vol. 3. Oct. 2002, pp. 1586-1591.
27. W. Chwei-Sen, O. H. Stielau, and G. A. Covic, "Design considerations for a contactless electric vehicle battery charger," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1308-1314, Oct. 2005.
28. O. H. Stielau and G. A. Covic, "Design of loosely coupled inductive power transfer systems," in Proc. Int. Conf. Power Syst. Technol., vol. 1. 2000, pp. 85-90.
29. A. P. Hu and S. Hussmann, "Improved power flow control for contactless moving sensor applications," IEEE Power Electron. Lett., vol. 2, no. 4, pp. 135-138, Dec. 2004.
30. J. T. Boys, C. I. Chen, and G. A. Covic, "Controlling inrush currents in inductively coupled power systems," in Proc. 7th IPEC, vol. 2. Dec. 2005, pp. 1046-1051.
31. G. A. J. Elliot, J. T. Boys, and G. A. Covic, "A design methodology for flat pick-up ICPT systems," in Proc. 1st IEEE Conf. Ind. Electron. Appl., May 2006, pp. 1-7.
32. A. M. Bradley, M. D. Feezor, H. Singh, and F. Y. Sorrell, "Power systems for autonomous underwater vehicles," IEEE J. Ocean. Eng., vol. 26, no. 4, pp. 526-538, Oct. 2001.
33. H. Singh et al., "Docking for an autonomous ocean sampling network," IEEE J. Ocean. Eng., vol. 26, no. 4, pp. 498-514, Oct. 2001.
34. K. W. Klontz et al., "Submersible contactless power delivery system," U.S. Patent 5 301 096, Apr. 5, 1994.
35. W. Kyung-Il, P. H. Seok, C. Y. Hyun, and K. K. Ho, "Contactless energy transmission system for linear servo motor," IEEE Trans. Magn., vol. 41, no. 5, pp. 1596-1599, May 2005.
36. A. Esser and H. C. Skudelny, "A new approach to power supplies for robots," IEEE Trans. Ind. Appl., vol. 27, no. 5, pp. 872-875, Sep./Oct. 1991.
37. G. A. J. Elliott, G. A. Covic, D. Kacprzak, and J. T. Boys, "A new concept: Asymmetrical pick-ups for inductively coupled power transfer monorail systems," IEEE Trans. Magn., vol. 42, no. 10, pp. 3389-3391, Oct. 2006.
38. A. Kawamura, K. Ishioka, and J. Hirai, "Wireless transmission of power and information through one high-frequency resonant AC link inverter for robot manipulator applications," IEEE Trans. Ind. Appl., vol. 32, no. 3, pp. 503-508, May/Jun. 1996.
39. S. I. Adachi, F. Sato, S. Kikuchi, and H. Matsuki, "Consideration of contactless power station with selective excitation to moving robot," IEEE Trans. Magn., vol. 35, no. 5, pp. 3583-3585, Sep. 1999.
40. J. Sallan, J. L. Villa, A. Llombart, and J. F. Sanz, "Optimal design of ICPT systems applied to electric vehicle battery charge," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2140-2149, Jun. 2009.
41. J. L. Villa, J. Sallán, A. Llombart, and J. F. Sanz, "Design of a high frequency inductively coupled power transfer system for electric vehicle battery charge," Appl. Energy, vol. 86, no. 3, pp. 355-363, 2009.
42. H. Chang-Yu, J. T. Boys, G. A. Covic, and M. Budhia, "Practical considerations for designing IPT system for EV battery charging," in Proc. IEEE VPPC, Sep. 2009, pp. 402-407.
43. L. H. Leo, H. Aiguo, and G. A. Covic, "Development of a discrete energy injection inverter for contactless power transfer," in Proc. 3rd IEEE ICIEA, Jun. 2008, pp. 1757-1761.
44. T. C. Sen, S. Yue, S. Y. Gang, N. S. Kiong, and A. P. Hu, "Determining multiple steady-state ZCS operating points of a switch-mode contactless power transfer system," IEEE Trans. Power Electron., vol. 24, no. 2, pp. 416-425, Feb. 2009.
45. J. U. W. Hsu, A. P. Hu, and A. Swain, "A wireless power pickup based on directional tuning control of magnetic amplifier," IEEE Trans. Ind. Electron., vol. 56, no. 7, pp. 2771-2781, Jul. 2009.
46. A. J. Moradewicz and M. P. Kazmierkowski, "Contactless energy transfer system with FPGA-controlled resonant converter," IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 3181-3190, Sep. 2010.
47. M. Budhia, G. A. Covic, and J. T. Boys, "Design and optimization of circular magnetic structures for lumped inductive power transfer systems," IEEE Trans. Power Electron., vol. 26, no. 11, pp. 3096-3108, Nov. 2011.
48. M. Budhia, J. T. Boys, G. A. Covic, and H. Chang-Yu, "Development of a single-sided flux magnetic coupler for electric vehicle IPT charging systems," IEEE Trans. Ind. Electron., vol. 60, no. 1, pp. 318-328, Jan. 2013.
49. G. A. Covic, M. L. G. Kissin, D. Kacprzak, N. Clausen, and H. Hao, "A bipolar primary pad topology for EV stationary charging and highway power by inductive coupling," in Proc. IEEE ECCE, Sep. 2011, pp. 1832-1838.
50. A. Zaheer, D. Kacprzak, and G. A. Covic, "A bipolar receiver pad in a lumped IPT system for electric vehicle charging applications," in Proc. IEEE ECCE, Sep. 2012, pp. 283-290.
51. N. Shinohara, "Wireless power transmission progress for electric vehicle in Japan," in Proc. IEEE RWS, Jan. 2013, pp. 109-111.
52. T. E. Stamati and P. Bauer, "On-road charging of electric vehicles," in Proc. IEEE ITEC, Jun. 2013, pp. 1-8.
53. N. Puqi, J. M. Miller, O. C. Onar, and C. P. White, "A compact wireless charging system development," in Proc. IEEE ECCE, Sep. 2013, pp. 3629-3634.
54. Systems Control Technology Inc., "Roadway powered electric vehicle project: Track construction and testing program phase 3D," California PATH Program, Inst. Transportation Studies, Univ. California, Berkeley, CA, USA, Tech. Rep. UCB-ITS-PRR-94-07, 1994.
55. H. H. Wu, A. Gilchrist, K. D. Sealy, and D. Bronson, "A high efficiency 5 kW inductive charger for EVs using dual side control," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 585-595, Aug. 2012.
56. L. Sungwoo, H. Jin, P. Changbyung, C. Nam-Sup, C. Gyu-Hyeoung, and R. Chun-Taek, "On-line electric vehicle using inductive power transfer system," in Proc. IEEE ECCE, Sep. 2010, pp. 1598-1601.
57. H. Jin, L. Wooyoung, C. Gyu-Hyeong, L. Byunghun, and R. Chun-Taek, "Characterization of novel inductive power transfer systems for on-line electric vehicles," in Proc. 26th Annu. IEEE APEC Expo., Mar. 2011, pp. 1975-1979.
58. F. Musavi, M. Edington, and W. Eberle, "Wireless power transfer: A survey of EV battery charging technologies," in Proc. IEEE ECCE, Sep. 2012, pp. 1804-1810.
59. G. A. Covic and J. T. Boys, "Modern trends in inductive power transfer for transportation applications," IEEE J. Emerg. Sel. Topics Power Electron., vol. 1, no. 1, pp. 28-41, Jul. 2013.
60. S. Lukic and Z. Pantic, "Cutting the cord: Static and dynamic inductive wireless charging of electric vehicles," IEEE Electrific. Mag., vol. 1, no. 1, pp. 57-64, Sep. 2013.
61. T.-D. Nguyen, S. Li, W. Li, and C. Mi, "Feasibility study on bipolar pads for efficient wireless power chargers," in Proc. APEC Expo., Fort Worth, TX, USA, 2014.
62. S. Valtchev, B. Borges, K. Brandisky, and J. B. Klaassens, "Resonant contactless energy transfer with improved efficiency," IEEE Trans. Power Electron., vol. 24, no. 3, pp. 685-699, Mar. 2009.
63. S. Jaegue et al., "Design and implementation of shaped magneticresonance-based wireless power transfer system for roadway-powered moving electric vehicles," IEEE Trans. Ind. Electron., vol. 61, no. 3, pp. 1179-1192, Mar. 2014.
64. K. V. Schuylenbergh and R. Puers, Inductive Powering-Basic Theory and Application to Biomedical Systems. New York, NY, USA: Springer-Verlag, 2009.
65. R. Mecke and C. Rathge, "High frequency resonant inverter for contactless energy transmission over large air gap," in Proc. IEEE 35th Annu. PESC, vol. 3. Jun. 2004, pp. 1737-1743.
66. J. T. Boys, G. A. J. Elliott, and G. A. Covic, "An appropriate magnetic coupling co-efficient for the design and comparison of ICPT pickups," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 333-335, Jan. 2007.
67. M. Budhia, G. Covic, and J. Boys, "A new IPT magnetic coupler for electric vehicle charging systems," in Proc. 36th Annu. Conf. IEEE Ind. Electron. Soc., Nov. 2010, pp. 2487-2492.
68. M. Budhia, G. A. Covic, J. T. Boys, and H. Chang-Yu, "Development and evaluation of single sided flux couplers for contactless electric vehicle charging," in Proc. IEEE ECCE, Sep. 2011, pp. 614-621.
69. M. Chigira, Y. Nagatsuka, Y. Kaneko, S. Abe, T. Yasuda, and A. Suzuki, "Small-size light-weight transformer with new core structure for contactless electric vehicle power transfer system," in Proc. IEEE ECCE, Sep. 2011, pp. 260-266.
70. S. Choi, J. Huh, W. Y. Lee, S. W. Lee, and C. T. Rim, "New cross-segmented power supply rails for roadway-powered electric vehicles," IEEE Trans. Power Electron., vol. 28, no. 12, pp. 5832-5841, Dec. 2013.
71. M. Kiani and M. Ghovanloo, "A figure-of-merit for designing highperformance inductive power transmission links," IEEE Trans. Ind. Electron., vol. 60, no. 11, pp. 5292-5305, Nov. 2013.
72. H. Jin, L. Sungwoo, P. Changbyung, C. Gyu-Hyeoung, and R. Chun-Taek, "High performance inductive power transfer system with narrow rail width for on-line electric vehicles," in Proc. IEEE ECCE, Sep. 2010, pp. 647-651.
73. J. Huh, S. W. Lee, W. Y. Lee, G. H. Cho, and C. T. Rim, "Narrow-width inductive power transfer system for online electrical vehicles," IEEE Trans. Power Electron., vol. 26, no. 12, pp. 3666-3679, Dec. 2011.
74. J. Y. Jae and K. Y. Dae, "System architecture and mathematical model of public transportation system utilizing wireless charging electric vehicles," in Proc. 15th Int. IEEE Conf. ITSC, Sep. 2012, pp. 1055-1060.
75. J. Y. Jae, K. Y. Dae, and J. Seungmin, "Optimal design of the wireless charging electric vehicle," in Proc. IEEE IEVC, Mar. 2012, pp. 1-5.
76. S. In-Soo and K. Jedok, "Electric vehicle on-road dynamic charging system with wireless power transfer technology," in Proc. IEEE IEMDC, May 2013, pp. 234-240.
77. J. T. Boys and S. Nishino, "Primary inductance pathway," U.S. Patent 5 619 078, Apr. 8, 1997.
78. G. R. Nagendra, J. T. Boys, G. A. Covic, B. S. Riar, and A. Sondhi, "Design of a double coupled IPT EV highway," in Proc. 39th Annu. Conf. IEEE Ind. Electron. Soc., Nov. 2013, pp. 4606-4611.
79. K. Lee, Z. Pantic, and S. Lukic, "Reflexive field containment in dynamic inductive power transfer systems," IEEE Trans. Power Electron., vol. 9, no. 9, pp. 4592-4602, Sep. 2014.
80. A. Khaligh and S. Dusmez, "Comprehensive topological analysis of conductive and inductive charging solutions for plug-in electric vehicles," IEEE Trans. Veh. Technol., vol. 61, no. 8, pp. 3475-3489, Oct. 2012.
81. W. Zhang, S.-C. Wong, C. K. Tse, and Q. Chen, "Analysis and comparison of secondary series-and parallel-compensated inductive power transfer systems operating for optimal efficiency and load-independent voltage-transfer ratio," IEEE Trans. Power Electron., vol. 29, no. 6, pp. 2979-2990, Jun. 2014.
82. C. Duan, C. Jiang, A. Taylor, and K. Bai, "Design of a zero-voltageswitching large-air-gap wireless charger with low electric stress for electric vehicles," IET Power Electron., vol. 6, no. 9, pp. 1742-1750, Nov. 2013.
83. Z. Pantic, B. Sanzhong, and S. Lukic, "ZCS LCC-compensated resonant inverter for inductive-power-transfer application," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3500-3510, Aug. 2011.
84. J. L. Villa, J. Sallan, J. F. S. Osorio, and A. Llombart, "Highmisalignment tolerant compensation topology for ICPT systems," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 945-951, Feb. 2012.
85. S. Dieckerhoff, M. J. Ruan, and R.W. D. Doncker, "Design of an IGBTbased LCL-resonant inverter for high-frequency induction heating," in Proc. Conf. Rec. IEEE Ind. Appl. Conf. 34th IAS Annu. Meeting, vol. 3. Oct. 1999, pp. 2039-2045.
86. G. L. Fischer and H. Doht, "An inverter system for inductive tube welding utilizing resonance transformation," in Proc. Conf. Rec. IEEE, Ind. Appl. Soc. Annu. Meeting, vol. 2. Oct. 1994, pp. 833-840.
87. M. L. G. Kissin, H. Chang-Yu, G. A. Covic, and J. T. Boys, "Detection of the tuned point of a fixed-frequency LCL resonant power supply," IEEE Trans. Power Electron., vol. 24, no. 4, pp. 1140-1143, Apr. 2009.
88. B. Sharp and H. Wu, "Asymmetrical voltage-cancellation control for LCL resonant converters in inductive power transfer systems," in Proc. 27th Annu. IEEE APEC Expo., Feb. 2012, pp. 661-666.
89. N. A. Keeling, G. A. Covic, and J. T. Boys, "A unity-power-factor IPT pickup for high-power applications," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 744-751, Feb. 2010.
90. N. Keeling, G. A. Covic, F. Hao, L. George, and J. T. Boys, "Variable tuning in LCL compensated contactless power transfer pickups," in Proc. IEEE ECCE, Sep. 2009, pp. 1826-1832.
91. C. Y. Huang, J. T. Boys, and G. A. Covic, "LCL pickup circulating current controller for inductive power transfer systems," IEEE Trans. Power Electron., vol. 28, no. 4, pp. 2081-2093, Apr. 2013.
92. H. L. Li, A. P. Hu, G. A. Covic, and T. Chunsen, "A new primary power regulation method for contactless power transfer," in Proc. IEEE ICIT, Feb. 2009, pp. 1-5.
93. L. Z. Ning, R. A. Chinga, T. Ryan, and L. Jenshan, "Design and test of a high-power high-efficiency loosely coupled planar wireless power transfer system," IEEE Trans. Ind. Electron., vol. 56, no. 5, pp. 1801-1812, May 2009.
94. L. H. Leo, A. P. Hu, and G. A. Covic, "A direct AC-AC converter for inductive power-transfer systems," IEEE Trans. Power Electron., vol. 27, no. 2, pp. 661-668, Feb. 2012.
95. J. M. Miller, C. P. White, O. C. Onar, and P. M. Ryan, "Grid side regulation of wireless power charging of plug-in electric vehicles," in Proc. IEEE ECCE, Sep. 2012, pp. 261-268.
96. B. N. Xuan, D. M. Vilathgamuwa, and U. K. Madawala, "A matrix converter based inductive power transfer system," in Proc. Conf. Power Energy IPEC, Dec. 2012, pp. 509-514.
97. Q. Wei et al., "A new type of IPT system with large lateral tolerance and its circuit analysis," in Proc. ICCVE, Dec. 2012, pp. 311-315.
98. S. Krishnan et al., "Frequency agile resonance-based wireless charging system for electric vehicles," in Proc. IEEE IEVC, Mar. 2012, pp. 1-4.
99. M. Borage, S. Tiwari, and S. Kotaiah, "Analysis and design of an LCL-T resonant converter as a constant-current power supply," IEEE Trans. Ind. Electron., vol. 52, no. 6, pp. 1547-1554, Dec. 2005.
100. H. H. Wu, J. T. Boys, and G. A. Covic, "An AC processing pickup for IPT systems," IEEE Trans. Power Electron., vol. 25, no. 5, pp. 1275-1284, May 2010.
101. H. H. Wu, G. A. Covic, J. T. Boys, and D. J. Robertson, "A seriestuned inductive-power-transfer pickup with a controllable AC-voltage output," IEEE Trans. Power Electron., vol. 26, no. 1, pp. 98-109, Jan. 2011.
102. S. J. Orfanidis. (2013). Electromagnetic Waves and Antennas [Online]. Available: http://eceweb1.rutgers.edu/~orfanidi/ewa/
103. K. A. Grajski, R. Tseng, and C. Wheatley, "Loosely-coupled wireless power transfer: Physics, circuits, standards," in Proc. IEEE MTT-S Int., Microwave Workshop Series Innovative Wireless Power Transmission, Technol., Syst., Appl., May 2012, pp. 9-14.
104. U. K. Madawala and D. J. Thrimawithana, "Current sourced bidirectional inductive power transfer system," IET Power Electron., vol. 4, no. 4, pp. 471-480, Apr. 2011.
105. U. K. Madawala and D. J. Thrimawithana, "A bidirectional inductive power interface for electric vehicles in V2G systems," IEEE Trans. Ind. Electron., vol. 58, no. 10, pp. 4789-4796, Oct. 2011.
106. D. J. Thrimawithana and U. K. Madawala, "A three-phase bi-directional IPT system for contactless charging of electric vehicles," in Proc. IEEE ISIE, Jun. 2011, pp. 1957-1962.
107. T. P. E. R. Joy, K. Thirugnanam, and P. Kumar, "Bidirectional contactless charging system using Li-ion battery model," in Proc. 7th IEEE ICIIS, Aug. 2012, pp. 1-6.
108. M. J. Neath, A. K. Swain, U. K. Madawala, D. J. Thrimawithana, and D. M. Vilathgamuwa, "Controller synthesis of a bidirectional inductive power interface for electric vehicles," in Proc. 3rd IEEE ICSET, Sep. 2012, pp. 60-65.
109. A. K. Swain, M. J. Neath, U. K. Madawala, and D. J. Thrimawithana, "A dynamic multivariable state-space model for bidirectional inductive power transfer systems," IEEE Trans. Power Electron., vol. 27, no. 11, pp. 4772-4780, Nov. 2012.
110. C. Tang, X. Dai, Z. Wang, Y. Su, and Y. Sun, "A bidirectional contactless power transfer system with dual-side power flow control," in Proc. IEEE Int. Conf. Power Syst. Technol., Nov. 2012, pp. 1-6.
111. D. J. Thrimawithana and U. K. Madawala, "A generalized steady-state model for bidirectional IPT systems," IEEE Trans. Power Electron., vol. 28, no. 10, pp. 4681-4689, Oct. 2013.
112. D. J. Thrimawithana, U. K. Madawala, and M. Neath, "A synchronization technique for bidirectional IPT systems," IEEE Trans. Ind. Electron., vol. 60, no. 1, pp. 301-309, Jan. 2013.
113. H. Xueliang, Q. Hao, H. Zhenchen, S. Yi, and L. Jun, "The interaction research of smart grid and EV based wireless charging," in Proc. IEEE VPPC, Oct. 2013, pp. 1-5.
114. D. van Wageningen and T. Staring, "The Qi wireless power standard," in Proc. 14th EPE/PEMC, 2010, pp. S15-25-S15-32.
115. J. B. Kenney, "Dedicated short-range communications (DSRC) standards in the United States," Proc. IEEE, vol. 99, no. 7, pp. 1162-1182, Jul. 2011.
116. S. M. Lukic, M. Saunders, Z. Pantic, S. Hung, and J. Taiber, "Use of inductive power transfer for electric vehicles," in Proc. IEEE Power Energy Soc. General Meeting, Jul. 2010, pp. 1-6.