Development of novel three-dimensional printed scaffolds for osteochondral regeneration

Tissue Engineering - Part A

Volumn 21, Issue 1-2, 2015, Pages 403-415

  Holmes, Benjamin ^a   Zhu, Wei ^a   Li, Jiaoyan ^a   Lee, James D ^a   Zhang, Lijie Grace ^a,b  

^a The George Washington University   (United States)

^b GEORGE WASHINGTON UNIVERSITY SCHOOL OF MEDICINE AND HEALTH SCIENCES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

3D PRINTERS; BIOCOMPATIBILITY; CELL CULTURE; COLLAGEN; ELASTIC MODULI; FRACTURE; FRACTURE TESTING; FRACTURE TOUGHNESS; MECHANICAL PROPERTIES; MECHANICAL TESTING; STEM CELLS;

BIOMECHANICAL PROPERTIES; CHONDROGENIC DIFFERENTIATION; HUMAN BONE MARROW MESENCHYMAL STEM CELLS; INTERFACIAL MECHANICAL PROPERTIES; MECHANICAL CHARACTERISTICS; OSTEOCHONDRAL REGENERATIONS; THREEDIMENSIONAL (3-D); TOTAL PROTEIN CONTENTS;

SCAFFOLDS (BIOLOGY);

ACETYLATED COLLAGEN; COLLAGEN DERIVATIVE; COLLAGEN TYPE 2; GLYCOSAMINOGLYCAN; UNCLASSIFIED DRUG; COLLAGEN;

ARTICLE; BIOCOMPATIBILITY; BIOMECHANICS; BONE MARROW DERIVED MESENCHYMAL STEM CELL; CELL DIFFERENTIATION; CELL GROWTH; CELL PROLIFERATION; CHONDROGENESIS; COLLAGEN SYNTHESIS; COMPRESSION; CONTROLLED STUDY; HUMAN; HUMAN CELL; IN VITRO STUDY; MATERIALS TESTING; MATHEMATICAL ANALYSIS; NORMAL HUMAN; PRIORITY JOURNAL; PROTEIN CONTENT; SHEAR STRENGTH; SIMULATION; SURFACE PROPERTY; THREE DIMENSIONAL PRINTED OSTEOCHONDRAL SCAFFOLD; THREE DIMENSIONAL PRINTING; TISSUE REGENERATION; TISSUE SCAFFOLD; YOUNG MODULUS; ACETYLATION; BONE DEVELOPMENT; CELL ADHESION; CHEMISTRY; COMPRESSIVE STRENGTH; COMPUTER AIDED DESIGN; KNEE; MESENCHYMAL STROMA CELL; METABOLISM; PHYSIOLOGY; POROSITY; PROCEDURES; PROTEIN SYNTHESIS; REGENERATION; TISSUE ENGINEERING;

ACETYLATION; CELL ADHESION; CELL DIFFERENTIATION; CELL PROLIFERATION; CHONDROGENESIS; COLLAGEN; COMPRESSIVE STRENGTH; COMPUTER-AIDED DESIGN; ELASTIC MODULUS; GLYCOSAMINOGLYCANS; HUMANS; KNEE; MESENCHYMAL STROMAL CELLS; OSTEOGENESIS; POROSITY; PRINTING, THREE-DIMENSIONAL; PROTEIN BIOSYNTHESIS; REGENERATION; SHEAR STRENGTH; TISSUE ENGINEERING; TISSUE SCAFFOLDS;

EID: 84921415363     PISSN: 19373341     EISSN: 1937335X     Source Type: Journal    
DOI: 10.1089/ten.tea.2014.0138     Document Type: Article

References (72)

1. Castro, N.J., Hacking, S.A., and Zhang, L.G. Recent progress in interfacial tissue engineering approaches for osteochondral defects. Ann Biomed Eng 40, 1628, 2012.
2. Zhang, L., Hu, J., and Kyriacos, A. Athanasiou. The role of tissue engineering in articular cartilage repair and regeneration. Crit Rev Biomed Eng 37, 1, 2009.
3. Centers for Disease Control and Prevention. A National Public Health Agenda for Osteoarthritis 2010, Available at: www.cdc.gov/arthritis/docs/oaagenda.pdf
4. Zhang, L., and Webster, T.J. Nanotechnology and nano-materials: promises for improved tissue regeneration. Nano Today 4, 66, 2009.
5. Levine, B., and Kanat, I.O. Subchondral bone cysts, osteo-chondritis dissecans, and Legg-Calve-Perthes disease: a correlation and proposal of their possible common etiology and pathogenesis. J Foot Surg 27, 75, 1988.
6. Kilian, K.A., Bugarija, B., Lahn, B.T., and Mrksich, M. Geometric cues for directing the differentiation of mesen-chymal stem cells. Proc Natl Acad Sci USA 107, 4872, 2010.
7. Mikos, A.G., Thorsen, A.J., Czerwonka, L.A., Bao, Y., Langer, R., Winslow, D.N., and Vacanti, J.P. Preparation and characterization of poly(L-lactic acid) foams. Polymer 35, 1068, 1994.
8. Jiang, C.C., Chiang, H., Liao, C.J., Lin, Y.J., Kuo, T.F., Shieh, C.S., Huang, Y.Y., and Tuan, R.S. Repair of porcine articular cartilage defect with a biphasic osteochondral composite. J Orthop Res 25, 1277, 2007.
9. Castro, N.J., O'Brien, C., and Zhang, L.G. Biomimetic biphasic 3D nanocomposite scaffold for osteochondral regeneration. AIChE J 60, 432, 2014.
10. Sill, T.J., and von Recum, H.A. Electrospinning: applications in drug delivery and tissue engineering. Biomaterials 29, 1989, 2008.
11. Holmes, B., Castro, N.J., Zhang, L.G., and Zussman, E. Electrospun fibrous scaffolds for bone and cartilage tissue generation: recent progress and future developments. Tissue Eng Part B Rev 18, 478, 2012.
12. Holmes, B., Castro, N.J., Li, J., Keidar, M., and Zhang, L.G. Enhanced human bone marrow mesenchymal stem cell functions in novel 3D cartilage scaffolds with hydrogen treated multi-walled carbon nanotubes. Nanotechnology 24, 365102, 2013.
13. Whang, K., Thomas, C.H., Healy, K.E., and Nuber, G. A novel method to fabricate bioabsorbable scaffolds. Polymer 36, 837, 1995.
14. Wang, M., Cheng, X., Zhu, W., Holmes, B., Keidar, M., and Zhang, L.G. Design of biomimetic and bioactive cold plasma-modified nanostructured scaffolds for enhanced osteogenic differentiation of bone marrow-derived mesen-chymal stem cells. Tissue Eng Part A 20, 1060, 2014.
15. Im, O., Li, J., Wang, M., Zhang, L.G., and Keidar, M. Biomimetic three-dimensional nanocrystalline hydroxyap-Atite and magnetically synthesized single-walled carbon nanotube chitosan nanocomposite for bone regeneration. Int J Nanomedicine 7, 2087, 2012.
16. Childs, A., Hemraz, U.D., Castro, N.J., Fenniri, H., and Zhang, L.G. Novel biologically-inspired rosette nanotube PLLA scaffolds for improving human mesenchymal stem cell chondrogenic differentiation. Biomed Mater 8, 065003, 2013.
17. Shim, J.H., Kim, J.Y., Park, M., Park, J., and Cho, D.W. Development of a hybrid scaffold with synthetic bioma-terials and hydrogel using solid freeform fabrication technology. Biofabrication 3, 034102, 2011.
18. O'Shea, T.M., and Miao, X. Bilayered scaffolds for os-teochondral tissue engineering. Tissue Eng Part B Rev 14, 447, 2008.
19. Derby, B. Printing and prototyping of tissues and scaffolds. Science 338, 921, 2012.
20. Cui, X., Breitenkamp, K., Finn, M.G., Lotz, M., and D'Lima, D.D. Direct human cartilage repair using three-dimensional bioprinting technology. Tissue Eng Part A 18, 1304, 2012.
21. Fedorovich, N.E., Schuurman, W., Wijnberg, H.M., Prins, H.J., van Weeren, P.R., Malda, J., Alblas, J., and Dhert, W.J. Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds. Tissue Eng Part C Methods 18, 33, 2012.
22. Cooke, M.N., Fisher, J.P., Dean, D., Rimnac, C., and Mi-kos, A.G. Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. J Biomed Mater Res B Appl Biomater 64, 65, 2003.
23. Fedorovich, N.E., Alblas, J., Hennink, W.E., Oner, F.C., and Dhert, W.J. Organ printing: the future of bone regeneration? Trends Biotechnol 29, 601, 2011.
24. Igawa, K., Chung, U.I., and Tei, Y. [Custom-made artificial bones fabricated by an inkjet printing technology]. Clin Calcium 18, 1737, 2008.
25. Lee, J.Y., Choi, B., Wu, B., and Lee, M. Customized bio-mimetic scaffolds created by indirect three-dimensional printing for tissue engineering. Biofabrication 5, 045003, 2013.
26. Rodrigues, M.T., Lee, S.J., Gomes, M.E., Reis, R.L., Atala, A., and Yoo, J.J. Bilayered constructs aimed at osteo-chondral strategies: the influence of medium supplements in the osteogenic and chondrogenic differentiation of am-niotic fluid-derived stem cells. Acta Biomater 8, 2795, 2012.
27. Miot, S., Brehm, W., Dickinson, S., Sims, T., Wixmerten, A., Longinotti, C., Hollander, A.P., Mainil-Varlet, P., and Martin, I. Influence of in vitro maturation of engineered cartilage on the outcome of osteochondral repair in a goat model. Eur Cells Mater 23, 222, 2012.
28. Shipley, R.J., Jones, G.W., Dyson, R.J., Sengers, B.G., Bailey, C.L., Catt, C.J., Please, C.P., and Malda, J. Design criteria for a printed tissue engineering construct: a mathematical homogenization approach. J Theor Biol 259, 489, 2009.
29. Aishwarya, S., Mahalakshmi, S., and Sehgal, P.K. Collagen-coated polycaprolactone microparticles as a controlled drug delivery system. J Microencapsul 25, 298, 2008.
30. Colter, D.C., Class, R., DiGirolamo, C.M., and Prockop, D.J. Rapid expansion of recycling stem cells in cultures of plastic-Adherent cells from human bone marrow. Proc Natl Acad Sci USA 97, 3213, 2000.
31. Oliveira, J.M., Rodrigues, M.T., Silva, S.S., Malafaya, P.B., Gomes, M.E., Viegas, C.A., Dias, I.R., Azevedo, J.T., Mano, J.F., and Reis, R.L. Novel hydroxyapatite/chitosan bilayered scaffold for osteochondral tissue-engineering applications: scaffold design and its performance when seeded with goat bone marrow stromal cells. Biomaterials 27, 6123, 2006.
32. Slivka, M.A., Chu, C.C., and Adisaputro, I.A. Fiber-matrix interface studies on bioabsorbable composite materials for internal fixation of bone fractures. I. Raw material evaluation and measurement of fiber-matrix interfacial adhesion. J Biomed Mater Res 36, 469, 1997.
33. Schaefer, D., Martin, I., Jundt, G., Seidel, J., Heberer, M., Grodzinsky, A., Bergin, I., Vunjak-Novakovic, G., and Freed, L.E. Tissue-engineered composites for the repair of large osteochondral defects. Arthritis Rheum 46, 2524, 2002.
34. Newitt, D.C., Majumdar, S., van Rietbergen, B., von In-gersleben, G., Harris, S.T., Genant, H.K., Chesnut, C., Garnero, P., and MacDonald, B. In vivo assessment of architecture and micro-finite element analysis derived indices of mechanical properties of trabecular bone in the radius. Osteoporos Int 13, 6, 2002.
35. Lima, E.G., Bian, L., Mauck, R.L., Byers, B.A., Tuan, R.S., Ateshian, G.A., and Hung, C.T. The effect of applied compressive loading on tissue-engineered cartilage constructs cultured with TGF-beta3. Conf Proc IEEE Eng Med Biol Soc 1, 779, 2006.
36. Kelly, D.J., and Prendergast, P.J. Prediction of the optimal mechanical properties for a scaffold used in osteochondral defect repair. Tissue Eng 12, 2509, 2006.
37. Giovannone, D., Reyes, M., Reyes, R., Correa, L., Martinez, D., Ra, H., Gomez, G., Kaiser, J., Ma, L., Stein, M.P., and de Bellard, M.E. Slits affect the timely migration of neural crest cells via Robo receptor. Dev Dyn 241, 1274, 2012.
38. Matsiko, A., Levingstone, T.J., O'Brien, F.J., and Gleeson, J.P. Addition of hyaluronic acid improves cellular infiltration and promotes early-stage chondrogenesis in a collagen-based scaffold for cartilage tissue engineering. J Mech Behav Biomed Mater 11, 41, 2012.
39. Guarino, V., Causa, F., Taddei, P., di Foggia, M., Ciapetti, G., Martini, D., Fagnano, C., Baldini, N., and Ambrosio, L. Polylactic acid fibre-reinforced polycaprolactone scaffolds for bone tissue engineering. Biomaterials 29, 3662, 2008.
40. Cui, X., Boland, T., D'Lima, D.D., and Lotz, M.K. Thermal inkjet printing in tissue engineering and regenerative medicine. Recent Pat Drug Deliv Formul 6, 149, 2012.
41. Castilho, M., Dias, M., Gbureck, U., Groll, J., Fernandes, P., Pires, I., Gouveia, B., Rodrigues, J., and Vorndran, E. Fabrication of computationally designed scaffolds by low temperature 3D printing. Biofabrication 5, 035012, 2013.
42. Fu, M., Lin, L., Kong, X., Zhao, W., Tang, L., Li, J., and Ouyang, J. Construction and accuracy assessment of patient-specific biocompatible drill template for cervical anterior transpedicular screw (ATPS) insertion: an in vitro study. PLoS One 8, e53580, 2013.
43. Hakansson, A., Rantatalo, M., Hansen, T., and Wanhainen, A. Patient specific biomodel of the whole aorta: the importance of calcified plaque removal. Vasa 40, 453, 2011.
44. Klammert, U., Gbureck, U., Vorndran, E., Rodiger, J., Meyer-Marcotty, P., and Kubler, A.C. 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects. J Craniomaxillofac Surg 38, 565, 2010.
45. Zhang, Q., Mochalin, V.N., Neitzel, I., Knoke, I.Y., Han, J., Klug, C.A., Zhou, J.G., Lelkes, P.I., and Gogotsi, Y. Fluorescent PLLA-nanodiamond composites for bone tissue engineering. Biomaterials 32, 87, 2011.
46. Yeo, M., Lee, H., and Kim, G. Three-dimensional hierarchical composite scaffolds consisting of polycaprolactone, b-tricalcium phosphate, and collagen nanofibers: fabrication, physical properties, and in vitro cell activity for bone tissue regeneration. Biomacromolecules 12, 502, 2010.
47. Lee, M., and Wu, B.M. Recent advances in 3D printing of tissue engineering scaffolds. Methods Mol Biol 868, 257, 2012.
48. Nair, L.S., Bhattacharyya, S., and Laurencin, C.T. Development of novel tissue engineering scaffolds via electro-spinning. Expert Opin Biol Ther 4, 659, 2004.
49. Ma, Z., Kotaki, M., Inai, R., and Ramakrishna, S. Potential of nanofiber matrix as tissue-engineering scaffolds. Tissue Eng 11, 101, 2005.
50. Broom, N.D., Oloyede, A., Flachsmann, R., and Hows, M. Dynamic fracture characteristics of the osteochondral junction undergoing shear deformation. Med Eng Phys 18, 396, 1996.
51. Flachsmann, E.R., Broom, N.D., and Oloyede, A. A bio-mechanical investigation of unconstrained shear failure of the osteochondral region under impact loading. Clin Bio-mech (Bristol, Avon) 10, 156, 1995.
52. Silyn-Roberts, H., and Broom, N.D. Fracture behaviour of cartilage-on-bone in response to repeated impact loading. Connect Tissue Res 24, 143, 1990.
53. Kumar, P., Oka, M., Nakamura, T., Yamamuro, T., and Delecrin, J. Mechanical strength of osteochondral junction. Nihon Seikeigeka Gakkai Zasshi 65, 1070, 1991.
54. Hayes, D.W., Jr., Brower, R.L., and John, K.J. Articular cartilage. Anatomy, injury, and repair. Clin Podiatr Med Surg 18, 35, 2001.
55. Kennedy, J.C., Grainger, R.W., and McGraw, R.W. Osteo-chondral fractures of the femoral condyles. J Bone Joint Surg Br 48, 436, 1966.
56. Imai, N., and Tomatsu, T. Cartilage lesions in the knee of adolescents and young adults: arthroscopic analysis. Ar-throscopy 7, 198, 1991.
57. Pope, M.H., and Murphy, M.C. Fracture energy of bone in a shear mode. Med Biol Eng 12, 763, 1974.
58. Hunger, P.M., Donius, A.E., and Wegst, U.G. Structure-property-processing correlations in freeze-cast composite scaffolds. Acta Biomater 9, 6338, 2013.
59. Nakai, M., Niinomi, M., and Ishii, D. Mechanical and biodegradable properties of porous titanium filled with poly-L-lactic acid by modified in situ polymerization technique. J Mech Behav Biomed Mater 4, 1206, 2011.
60. Rossi, R.C. Prediction of the elastic moduli of composites. J Am Cer Soc 51, 433, 1968.
61. Rice, R.W. Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations. J Mater Sci 28, 2187, 1993.
62. Liu, D.-M. Control of pore geometry on influencing the mechanical property of porous hydroxyapatite bioceramic. J Mater Sci Lett 15, 419, 1996.
63. Caterson, E.J., Li, W.J., Nesti, L.J., Albert, T., Danielson, K., and Tuan, R.S. Polymer/alginate amalgam for cartilage-tissue engineering. Ann N Y Acad Sci 961, 134, 2002.
64. Zhang, L., Hum, M., Wang, M., Li, Y., Chen, H., Chu, C., and Jiang, H. Evaluation of modifying collagen matrix with RGD peptide through periodate oxidation. J Biomed Mater Res A 73, 468, 2005.
65. Zhang, Y.Z., and Da, W.M. [In vitro biological characteristics of mesenchymal stem cells from patients with mye-lodysplastic syndrome and their support to hematopoiesis]. Zhongguo Shi Yan Xue Ye Xue Za Zhi 13, 839, 2005.
66. Poldervaart, M.T., Wang, H., van der Stok, J., Weinans, H., Leeuwenburgh, S.C., Oner, F.C., Dhert, W.J., and Alblas, J. Sustained release of BMP-2 in bioprinted alginate for os-teogenicity in mice and rats. PLoS One 8, e72610, 2013.
67. Jager, M., Feser, T., Denck, H., and Krauspe, R. Proliferation and osteogenic differentiation of mesenchymal stem cells cultured onto three different polymers in vitro. Ann Biomed Eng 33, 1319, 2005.
68. Curran, J.M., Chen, R., and Hunt, J.A. Controlling the phenotype and function of mesenchymal stem cells in vitro by adhesion to silane-modified clean glass surfaces. Bio-materials 26, 7057, 2005.
69. Li, W.J., Tuli, R., Huang, X., Laquerriere, P., and Tuan, R.S. Multilineage differentiation of human mesenchymal stem cells in a three-dimensional nanofibrous scaffold. Biomaterials 26, 5158, 2005.
70. Ishii, M., Koike, C., Igarashi, A., Yamanaka, K., Pan, H., Higashi, Y., Kawaguchi, H., Sugiyama, M., Kamata, N., Iwata, T., Matsubara, T., Nakamura, K., Kurihara, H., Tsuji, K., and Kato, Y. Molecular markers distinguish bone marrow mesenchymal stem cells from fibroblasts. Biochem Biophys Res Commun 332, 297, 2005.
71. Farrell, E., Byrne, E.M., Fischer, J., O'Brien, F.J., O'Connell, B.C., Prendergast, P.J., and Campbell, V.A. A comparison of the osteogenic potential of adult rat mes-enchymal stem cells cultured in 2-D and on 3-D collagen glycosaminoglycan scaffolds. Technol Health Care 15, 19, 2007.
72. Matsubara, T., Tsutsumi, S., Pan, H., Hiraoka, H., Oda, R., Nishimura, M., Kawaguchi, H., Nakamura, K., and Kato, Y. A new technique to expand human mesenchymal stem cells using basement membrane extracellular matrix. Bio-chem Biophys Res Commun 313, 503, 2004.