The role of physico-chemical and bulk characteristics of co-spray dried l-leucine and polyvinylpyrrolidone on glidant and binder properties in interactive mixtures

International Journal of Pharmaceutics

Volumn 479, Issue 2, 2015, Pages 338-348

  Mangal, Sharad ^a   Meiser, Felix ^a   Lakio, Satu ^a   Morton, David ^a   Larson, Ian ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

Co processed; Interactive excipient; Lubricant; Polyvinylpyrrolidone

Indexed keywords

EXCIPIENT; GLIDING AGENT; LEUCINE; PARACETAMOL; POVIDONE;

AERATION; ARTICLE; BULK DENSITY; CHEMICAL COMPOSITION; CONCENTRATION (PARAMETERS); PARTICLE SIZE; PHYSICAL CHEMISTRY; PRIORITY JOURNAL; QUALITATIVE ANALYSIS; SURFACE PROPERTY; TENSILE STRENGTH; CHEMISTRY; COMPARATIVE STUDY; DRUG FORMULATION; MEDICINAL CHEMISTRY;

ACETAMINOPHEN; CHEMISTRY, PHARMACEUTICAL; DRUG COMPOUNDING; EXCIPIENTS; LEUCINE; PARTICLE SIZE; POVIDONE;

EID: 84920996923     PISSN: 03785173     EISSN: 18733476     Source Type: Journal    
DOI: 10.1016/j.ijpharm.2015.01.001     Document Type: Article

References (64)

1. E.C. Abdullah, and D. Geldart The use of bulk density measurements as flowability indicators Powder Technol. 102 1999 151 165
2. G.P. Andrews Advances in solid dosage form manufacturing technology Philos. Trans. R. Soc. A 365 2007 2935 2949
3. N.A. Armstrong Tablet manufacture by direct compression J. Swarbrick, Encyclopedia of Pharmaceutical Technology third ed. 2007 Informa Healthcare USA 3673 3683
4. G.K. Bolhius, and H.D. Waard Materials for direct compaction G. Alderborn, C. Nystrom, Pharmaceutical Powder Compaction Technology 1996 Informa Healthcare New York 419 500
5. G.K. Bolhuis, and N.A. Armstrong Excipients for direct compaction - an update Pharm. Dev. Technol. 11 2006 111 124
6. A. Castellanos The relationship between attractive interparticle forces and bulk behaviour in dry and uncharged fine powders Adv. Phys. 54 2005 263 376
7. N.Y.K. Chew, B.Y. Shekunov, H.H.Y. Tong, A.H.L. Chow, C. Savage, J. Wu, and H.K. Chan Effect of amino acids on the dispersion of disodium cromoglycate powders J. Pharm. Sci. 94 2005 2289 2300
8. N.Y.K. Chew, P. Tang, H.K. Chan, and J.A. Raper How much particle surface corrugation is sufficient to improve aerosol performance of powders? Pharm. Res. 22 2005 148 152
9. M.J. Crooks, and R. Ho Ordered mixing in direct compression of tablets Powder Technol. 14 1976 161 167
10. M.M. de Villiers, A.P. Lötter, and J.G. van der Watt Influence of surfactants and interactive mixing on the cohesiveproperties of a poorly wettable solid Powder Technol. 75 1993 159 165
11. B.V. Derjaguin, V.M. Muller, and Y.P. Toporov Effect of contact deformations on the adhesion of particles J. Colloid Interface Sci. 53 1975 314 326
12. J.T. Fell, and J.M. Newton Determination of tablet strength by the diametral-compression test J. Pharm. Sci. 59 1970 688 691
13. A.L. Feng, M.A. Boraey, M.A. Gwin, P.R. Finlay, P.J. Kuehl, and R. Vehring Mechanistic models facilitate efficient development of leucine containing microparticles for pulmonary drug delivery Int. J. Pharm. 409 2011 156 163
14. F.M. Fowkes Attractive forces at interfaces Ind. Eng. Chem. Res. 56 1964 40 52
15. R. Freeman Predicting flowability and characterizing powders Pharm. Dev. Technol. Eur. 16 2004 41
16. R. Freeman Measuring the flow properties of consolidated: conditioned and aerated powders - a comparative study using a powder rheometer and a rotational shear cell Powder Technol. 174 2007 25 33
17. T. Freeman, and R. Price Dynamic powder characterization for DPI formulation Drug Deliv. Technol. 9 2009 50 55
18. Friedman, R., 2011. Pharmaceutical quality systems: US perspective, Pharmaceutical Quality System (ICH Q10) Conference, Brussels, Belgium.
19. X. Fu, D. Huck, L. Makein, B. Armstrong, U. Willen, and T. Freeman Effect of particle shape and size on flow properties of lactose powders Particuology 10 2012 203 208
20. S.F. Gharaibeh, and A. Aburub Use of first derivative of displacement vs. force profiles to determine deformation behavior of compressed powders AAPS PharmSciTech 14 2013 398 401
21. A. Gupta, M. Hamad, M. Tawakkul, V. Sayeed, and M. Khan Difference in the lubrication efficiency of bovine and vegetable-derived magnesium stearate during tabletting AAPS PharmSciTech 10 2009 500 504
22. X. Han, L. Jallo, D. To, C. Ghoroi, and R. Dave Passivation of high-surface-energy sites of milled ibuprofen crystals via dry coating for reduced cohesion and improved flowability J. Pharm. Sci. 102 2013 2282 2296
23. N. Harnby, A.E. Hawkins, and D. Vandame The use of bulk density determination as a means of typifying the flow characteristics of loosely compacted powders under conditions of variable relative humidity Chem. Eng. Sci. 42 1987 879 888
24. J.A. Hersey Ordered mixing: a new concept in powder mixing practice Powder Technol. 11 1975 41 44
25. L.J. Jallo, Y. Chen, J. Bowen, F. Etzler, and R. Dave Prediction of inter-particle adhesion force from surface energy and surface roughness J. Adhes. Sci. Technol. 25 2011 367 384
26. K.L. Johnson, K. Kendall, and A.D. Roberts Surface energy and the contact of elastic solids Proc. R. Soc. Lond. A 324 1971 301 313
27. S. Jonat, S. Hasenzahl, A. Gray, and P.C. Schmidt Mechanism of glidants: Investigation of the effect of different colloidal silicon dioxide types on powder flow by atomic force and scanning electron microscopy J. Pharm. Sci. 93 2004 2635 2644
28. Y. Kato, M. Ohkuma, Y. Shimada, and H. Sunada Evaluation of the flowability of surface-modified preparations by the measurement of the inter-particle adhesive force J. Drug Deliv. Sci. Technol. 15 2005 217 221
29. K. Kolter, and D. Flick Structure and dry binding activity of different polymers: including Kollidon VA 64 Drug Dev. Ind. Pharm. 26 2000 1159 1165
30. S. Mattsson, and C. Nyström Evaluation of strength-enhancing factors of a ductile binder in direct compression of sodium bicarbonate and calcium carbonate powders Eur. J. Pharm. Sci. 10 2000 53 66
31. K. Meyer, and I. Zimmermann Effect of glidants in binary powder mixtures Powder Technol. 139 2004 40 54
32. C.M. Minchom, and N.A. Armstrong A proposed technique for expressing the capacity of directly compressible tablet diluents J. Pharm. Pharmacol. 39 1989 69
33. S.K. Nachaegari, and A.K. Bansal Coprocessed excipients for solid dosage forms Pharm. Technol. 28 2004 52 64
34. S. Patel, A.M. Kaushal, and A.K. Bansal Compression physics in the formulation development of tablets Crit. Rev. Ther. Drug 23 2006 1 66
35. G.E. Peck, N.R. Anderson, and G.S. Banker Principles of improved tablet production system design H.A. Liebermann, L. Lachman, J.B. Schwartz, Pharmaceutical Dosage Froms: Tablets 1990 Lea & Febiger 1 76
36. K.G. Pitt, and M.G. Heasley Determination of the tensile strength of elongated tablets Powder Technol. 238 2013 169 175
37. D. Reimerdes The near future of tablet excipients Manuf. Chemist. 64 1993 14 15
38. J. Rojas, I. Buckner, and V. Kumar Co-proccessed excipients with enhanced direct compression functionality for improved tableting performance Drug Dev. Ind. Pharm. 38 2012 1159 1170
39. G. Röscheisen, and P.C. Schmidt Preparation and optimization of l-leucine as lubricant for effervescent tablet formulations Pharm. Acta. Helv. 70 1995 133 139
40. B. Rotthäuser, G. Kraus, and P.C. Schmidt Optimization of an effervescent tablet formulation using a central composite design optimization of an effervescent tablet formulation containing spray dried l-leucine and polyethylene glycol 6000 as lubricants using a central composite design Eur. J. Pharm. Biopharm. 46 1998 85 94
41. S. Saha, and A.F. Shahiwala Multifunctional coprocessed excipients for improved tabletting performance Expert Opin. Drug Deliv. 6 2009 197 208
42. J. Schultz, L. Lavielle, and C. Martin The role of the interface in carbon fibre-epoxy composites J. Adhes. 23 1987 45 60
43. D. Schulze Powders and Bulk Solids: Behavior, Characterization, Storage and Flow 2008 Springer Berlin-Heidelberg-NewYork-Tokyo
44. G.W. Skinner, W.W. Harcum, P.E. Barnum, and J.-H. Guo The evaluation of fine-particle hydroxypropylcellulose as a roller compaction binder in pharmaceutical applications Drug Dev. Ind. Pharm. 25 1999 1121 1128
45. T. Sou, L.M. Kaminskas, T.-H. Nguyen, R. Carlberg, M.P. McIntosh, and D.A.V. Morton The effect of amino acid excipients on morphology and solid-state properties of multi-component spray-dried formulations for pulmonary delivery of biomacromolecules Eur. J. Pharm. Biopharm. 83 2013 234 243
46. T. Sou, L. Orlando, M.P. McIntosh, L.M. Kaminskas, and D.A.V. Morton Investigating the interactions of amino acid components on a mannitol-based spray-dried powder formulation for pulmonary delivery: a design of experiment approach Int. J. Pharm. 421 2011 220 229
47. J.N. Staniforth Ordered mixing or spontaneous granulation? Powder Technol. 45 1985 73 77
48. J.N. Staniforth Powder flow M.E. Aulton, Pharmaceutics: The Science of Dosage Form Design second ed. 2002 Churchill Livingstone 197 210
49. J.N. Staniforth, and J.E. Rees Electrostatic charge interactions in ordered powder mixes J. Pharm. Pharmacol. 34 1982 69 76
50. P.L. Stephenson, and W.J. Thiel The effect of humidity on the production of ordered mixtures Powder Technol. 25 1980 115 119
51. C.C. Sun Decoding powder tabletability: roles of particle adhesion and plasticity J. Adhes. Sci. Technol. 25 2011 483 499
52. J.L. Tian, C. Tian, and X. Ke Comparative evaluation of a co-processed self-lubricating excipient LubriTose SD as a direct compression vehicle J. Drug Del. Sci. Tech. 22 2012 562 567
53. M.J. Tobyn, G.P. McCarthy, J.N. Staniforth, and S. Edge Physicochemical comparison between microcrystalline cellulose and silicified microcrystalline cellulose Int. J. Pharm. 169 1998 183 194
54. D. Traini, P.M. Young, F. Thielmann, and M. Acharya The influence of lactose pseudopolymorphic form on salbutamol sulfate-lactose interactions in DPI formulations Drug Dev. Ind. Pharm. 34 2008 992 1001
55. D. Turki, and N. Fatah Behavior and fluidization of the cohesive powders: agglomerates sizes approach Braz. J. Chem. Eng. 25 2008 697 711
56. D. Turki, and N. Fatah Description of consolidation forces on nanometric powders Braz. J. Chem. Eng. 27 2010 555 562
57. C.J. van Oss Acid-base interfacial interactions in aqueous media Colloid Surf. A 78 1993 1 49
58. C.J. van Oss, M.K. Chaudhury, and R.J. Good Monopolar surfaces Adv. Colloid Interface Sci. 28 1987 35 64
59. C.J. Van Oss, R.J. Good, and M.K. Chaudhury Additive and nonadditive surface tension components and the interpretation of contact angles Langmuir 4 1988 884 891
60. R. Vehring Pharmaceutical particle engineering via spray drying Pharm. Res. 25 2008 999 1022
61. H.Y. Xie The role of interparticle forces in the fluidization of fine particles Powder Technol. 94 1997 99 108
62. J. Yang, A. Sliva, A. Banerjee, R.N. Dave, and R. Pfeffer Dry particle coating for improving the flowability of cohesive powders Powder Technol. 158 2005 21 33
63. J.J. Yang, C.Y. Liu, L.H. Quan, and Y.H. Liao Preparation and in vitro aerosol performance of spray-dried Shuang-Huang-Lian corrugated particles in carrier-based dry powder inhalers AAPS PharmSciTech 13 2012 816 825
64. L.X. Yu Pharmaceutical quality by design: product and process development understanding, and control Pharm. Res. 25 2008 781 791