Dynamic modelling of wear evolution in rolling bearings

Tribology International

Volumn 84, Issue , 2015, Pages 90-99

  El Thalji, Idriss ^a   Jantunen, Erkki ^a  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Contact mechanics; Dynamic modelling; Rolling bearings; Wear evolution

Indexed keywords

CONDITION MONITORING; DEFORMATION; DETERIORATION; DYNAMIC MODELS; DYNAMICS; WEAR OF MATERIALS;

COMPLEX PROCESSES; CONTACT MECHANICS; DETERIORATION PROCESS; DYNAMIC IMPACTS; EVOLUTION MODELING; ROLLING BEARINGS; SIMULATED RESULTS; TRANSITION POINT;

ROLLER BEARINGS;

EID: 84919629575     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2014.11.021     Document Type: Article

References (81)

1. Palmgren A. Ball and roller bearing engineering. Philadelphia: S.H. Burbank and Co. Inc; 1947.
2. Harris FJ. Rolling bearing analysis I, First. New York: John Wiley & Sons, Inc.; 1966.
3. Gupta PK. Transient ball motion and skid in ball bearings. Trans ASME, J Lubr Technol 1975:261-9.
4. Fukata S, Gad EH, Kondou T, Ayabe T, Tamura H. On the vibration of ball bearings. Bull JSME 1985;28(239):899-904.
5. Wijnat YH, Wensing JA, van Nijen GC. The influence of lubrication on the dynamic behaviour of ball bearings. J Sound Vib 1999;222(4):579-96.
6. Tiwari R, Vyas NS. Dynamic response of an unbalanced rotor supported on ball bearings. J Sound Vib 1995;187(2):229-39.
7. Tiwari M, Gupta K, Prakash O. Dynamic response of an unbalanced rotor supported on ball bearings. J Sound Vib 2000;238:757-79.
8. Tiwari M, Gupta K, Prakash O. Effect of radial internal clearance of ball bearing on the dynamics of a balanced horizontal rotor. J Sound Vib 2000;238:723-56.
9. Sopanen J, Mikkola A. Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 1: Theory. Proc Inst Mech Eng. Part K J Multi-body Dyn 2003;217(3):201-11 (Jan.).
10. Kiral Z, Karagülle H. Simulation and analysis of vibration signals generated by rolling element bearing with defects. Tribol Int Sep. 2003;36(9):667-78.
11. Endo H. A study of gear faults by simulation and the development of differential diagnostic techniques. Sydney: UNSW; 2005.
12. Sawalhi N, Randall RB. Simulating gear and bearing interactions in the presence of faults: Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults. Mech Syst Sig Process 2008;22 (8):1924-51 (Nov.).
13. Massi F, Rocchi J, Culla A, Berthier Y. Coupling system dynamics and contact behaviour: modelling bearings subjected to environmental induced vibrations and 'false brinelling' degradation. Mech Syst Sig Process 2010;24(4):1068-80 (May).
14. Purohit RK, Purohit K. Dyanmic analysis of ball bearings with effect of preload and number of balls. Int J Appl Mech Eng 2006;11(1):77-91.
15. Cao M, Xiao J. A comprehensive dynamic model of double-row spherical roller bearing-Model development and case studies on surface defects, preloads, and radial clearance. Mech Syst Sig Process Feb. 2008;22:467-89.
16. Nakhaeinejad M. Fault detection and model-based diagnostics in nonlinear dynamic systems. Austin: University of Texas; 2010.
17. Jang GH, Jeong SW. Nonlinear excitation model of ball bearing waviness in a rigid rotor supported by two or more ball bearings considering five degrees of freedom. J Tribol 2002;124:82-90.
18. McFadden PD, Smith JD. Model for the vibration produced by a single point defect in a rolling element bearing. J Sound Vib 1984;96(1):69-82.
19. McFadden PD, Smith JD. The vibration produced by multiple point defects in a rolling element bearing. J Sound Vib 1985;98(2):263-73.
20. Tandon N, Choudhury A. An analytical model for the prediction of the vibration response of rolling element bearings due to a localized defect. J Sound Vib 1997;205(3):275-92.
21. Wang Y-F, Kootsookos PJ. Modeling of low shaft speed bearing faults for condition monitoring. Mech Syst Sig Process 1998;12(3):415-26 (May).
22. Ghafari SH, Golnaraghi F, Ismail F. Effect of localized faults on chaotic vibration of rolling element bearings. Nonlinear Dyn 2007;53(4):287-301 (Dec.).
23. Rafsanjani A, Abbasion S, Farshidianfar A, Moeenfard H. Nonlinear dynamic modeling of surface defects in rolling element bearing systems. J Sound Vib 2009;319:1150-74 (Jan.).
24. Malhi AS. Finite element modelling of vibrations caused by a defect in the outer ring of a ball bearing. Amherst: University of Massachusetts; 2002.
25. Liu J, Shao Y, Lim TC. Vibration analysis of ball bearings with a localized defect applying piecewise response function. Mech Mach Theory 2012;56:156-69 (Oct.).
26. Ashtekar A, Sadeghi F, Stacke L-E. A new approach to modeling surface defects in bearing dynamics simulations. J Tribol 2008;130.
27. Sassi S, Badri B, Thomas M. A numerical model to predict damaged bearing vibrations. J Vib Control 2007;13(11):1603-28 (Nov.).
28. Patil MS, Mathew J, Rajendrakumar PK, Desai S. A theoretical model to predict the effect of localized defect on vibrations associated with ball bearing. Int J Mech Sci 2010;52:1193-201 (Sep.).
29. Tadina M, Boltezar M. Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up. J Sound Vib 2011;300 (17):4287-301.
30. Li Y, Billington S, Zhang C, Kurfess T, Danyluk S, Liang S. Adaptive prognostics for rolling element bearing condition. Mech Syst Sig Process 1999;13 (1):103-13 (Jan.).
31. Li Y, Kurfess T, Liang Y. Stochastic prognostics for rolling element bearings. Mech Syst Sig Process 2000;14(5):747-62.
32. Qiu J, Zhang C, Seth BB, Liang SY. Damage mechanics approach for bearing lifetime prognostics. Mech Syst Sig Process 2002;16:817-29 (Sep.).
33. Marble S, Morton BP. Predicting the remaining life of propulsion system bearings. In: Proceedings of the 2006 IEEE aerospace conference; 2006.
34. Begg CD, Merdes T, Byington C, Maynard K. Dynamics modeling for mechanical fault diagnostics and prognostics. In: Mechanical system modeling for failure diagnosis and prognosis, Maintenance and reliability conference, no. Marcon 99; 1999.
35. Begg CD, Byington CS, Maynard KP, Dynamic simulation of mechanical fault transition. In Proceedings of the 54th meeting of the society for machinery failure prevention technology; 2000, p. 203-212.
36. Chelidza D, Cusumano JP. A dynamical systems approach to failure prognosis. J Vib Acoust 2004;126.
37. El-Thalji I, Jantunen E, Wear of rolling element bearings. In: Proceedings conference of Condition Monitoring and Diagnostic Engineering Management (COMADEM); 2013.
38. Voskamp AP. Material response to rolling contact loading. J Tribol 1985;107:359-64.
39. El-Thalji I, Jantunen E, On the integration of wear model into dynamic analysis for rolling element bearing. In: Proceedings of the second international workshop and congress on eMaintenance; 2012, p. 137-143.
40. Arslan H, Aktürk N. An investigation of rolling element vibrations caused by local defects. J Tribol 2008;130.
41. Xu G, Sadeghi F. Spall initiation and propagation due to debris denting. Wear 1996;201:106-16.
42. Mota V, Ferreira LA. Influence of grease composition on rolling contact wear: experimental study. Tribol Int 2009;42:569-74 (Apr.).
43. Morales-Espejel GE, Brizmer V. Micropitting modelling in rolling-sliding contacts: application to rolling bearings. Tribol Trans 2011;54(4):625-43 (Jul.).
44. Dwyer-Jones RS. Predicting the abrasive wear of ball bearings by lubricant debris. Wear 1999;233-235:692-701.
45. Maru MM, Castillo RS, Padovese LR. Study of solid contamination in ball bearings through vibration and wear analyses. Tribol Int 2007;40(3):433-40 (Mar.).
46. El-Thalji I, Jantunen E. A descriptive model of wear evolution in rolling bearings. Eng Fail Anal 2014;45:204-24.
47. Harris FJ. Rolling bearing analysis, 3rd ed. New York: John Wiley & Sons, Inc.; 1991.
48. Faik S, Witteman H, Modeling of impact dynamics: a literature survey. In: International ADAMS user conference; 2000.
49. F. Normani. Principle of impulse and momentum; 2012. [Online]. Available: 〈http://www.real-world-physics-problems.com/impulse-and-momentum.html〉.
50. Sahoo P, Banerjee A. Asperity interaction in elastic-plastic contact of rough surfaces in presence of adhesion. J Phys D: Appl Phys 2005;38(16):2841-7 (Aug.).
51. Kim H, Shaik NH, Xu X, Raman A, Strachan A. Multiscale contact mechanics model for RF-MEMS switches with quantified uncertainties. Modell Simul Mater Sci Eng 2013;21(8) (Dec.).
52. Masen MA, de Rooij MB, Schipper DJ. Micro-contact based modelling of abrasive wear. Wear 2005;258:339-48 (Jan.).
53. Kim TH, Olver AV. Stress history in rolling-sliding contact of rough surfaces. Tribol Int 1998;31(12):727-36.
54. Karmakar S, Rao URK, Sethuramiah A. An approach towards fatigue wear modeling. Wear 1996;198:242-50 (Oct.).
55. Jaing Y, Sehitoglu H. Rolling contact stress analysis with the application of a new plasticity model. Wear 1996;191:35-44.
56. Franklin FJ, Widiyarta I, Kapoor A. Computer simulation of wear and rolling contact fatigue. Wear 2001;251:949-55 (Oct.).
57. Holmberg K, Laukkanen A, Ronkainen H, Wallin K. Tribological analysis of fracture conditions in thin surface coatings by 3D FEM modelling and stress simulations. Tribol Int 2005;38(11-12):1035-49 (Nov.).
58. Hannes D, Alfredsson B. Rolling contact fatigue crack path prediction by the asperity point load mechanism. Eng Fract Mech 2011;78:2848-69 (Dec.).
59. Ringsberg JW, Bergkvist A. On propagation of short rolling contact fatigue cracks. Fatigue Fract Eng Mater Struct 2003;26:969-83.
60. Tsushima N. Crack propagation of rolling contact fatigue in ball bearing steel due to tensile strain. NTN Tech Rev 2007;75:128-38.
61. Liu Y, Liu L, Mahadevan S. Analysis of subsurface crack propagation under rolling contact loading in railroad wheels using FEM. Eng Fract Mech 2007;74:2659-74 (Nov.).
62. Richard Liu C, Choi Y. A new methodology for predicting crack initiation life for rolling contact fatigue based on dislocation and crack propagation. Int J Mech Sci 2008;50:117-23 (Feb.).
63. Donzella G, Petrogalli C. A failure assessment diagram for components subjected to rolling contact loading. Int J Fatigue 2010;32:256-68 (Feb.).
64. Leonel ED, Venturini WS. Multiple random crack propagation using a boundary element formulation. Eng Fract Mech 2011;78:1077-90 (Apr.).
65. Glodez S, Ren Z. Modelling of crack growth under cyclic contact loading. Theor Appl Fract Mech 2000;30:159-73.
66. Bogdanski S, Brown MW. Modelling the three-dimensional behaviour of shallow rolling contact fatigue cracks in rails. Wear 2002;253:17-25.
67. Bogdañski S, Trajer M. A dimensionless multi-size finite element model of a rolling contact fatigue crack. Wear 2005;258:1265-72 (Mar.).
68. Choi Y, Liu CR. Rolling contact fatigue life of finish hard machined surfaces Part 1. Model development. Wear 2006;261:485-91 (Sep.).
69. Fajdiga G, Ren Z, Kramar J. Comparison of virtual crack extension and strain energy density methods applied to contact surface crack growth. Eng Fract Mech 2007;74:2721-34 (Nov.).
70. Raje N, Sadeghi F, Rateick RG, Hoeprich MR. A numerical model for life scatter in rolling element bearings. J Tribol 2008;130.
71. Canadinc D, Sehitoglu H, Verzal K. Analysis of surface crack growth under rolling contact fatigue. Int J Fatigue 2008;30:1678-89 (Sep.).
72. Sadeghi F, Jalalahmadi B, Slack TS, Raje N, Arakere NK. A review of rolling contact fatigue. J Tribol 2009;131(4).
73. Slack T, Sadeghi F. Explicit finite element modeling of subsurface initiated spalling in rolling contacts. Tribol Int 2010;43:1693-702 (Sep.).
74. Slack T, Sadeghi F. Cohesive zone modeling of intergranular fatigue damage in rolling contacts. Tribol Int 2011;44:797-804 (Jul.).
75. Warhadpande A, Sadeghi F, Kotzalas MN, Doll G. Effects of plasticity on subsurface initiated spalling in rolling contact fatigue. Int J Fatigue 2012;36:80-95 (Mar.).
76. Weinzapfel N, Sadeghi F. Numerical modeling of sub-surface initiated spalling in rolling contacts. Tribol Int 2012 (Mar.).
77. Santus C, Beghini M, Bartilotta I, Facchini M. Surface and subsurface rolling contact fatigue characteristic depths and proposal of stress indexes. Int J Fatigue 2012;45:71-81 (Dec.).
78. Tarantino MG, Beretta S, Foletti S, Papadopoulos I. Experiments under pure shear and rolling contact fatigue conditions: competition between tensile and shear mode crack growth. Int J Fatigue 2013;46:67-80 (Jan.).
79. Navarro A, Rios ER. Short and long fatigue crack growth-a unified model. Philos Mag 1988;57:15-36.
80. Sun Z, Rios ER, Miller KJ. Modelling small fatigue cracks interacting with grain boundaries. Fatigue Fract Eng Meterl 1991;14:277-91.
81. Jantunen E. How to diagnose the wear of rolling element bearings based on indirect condition monitoring methods. Int J COMADEM 2006;9(3):24-38.