Micropitting modelling in rolling–sliding contacts: Application to rolling bearings

Tribology Transactions

Volumn 54, Issue 4, 2011, Pages 625-643

  Morales Espejel, G E ^a,b   Brizmer, V ^a  

^a SKF ENGINEERING AND RESEARCH CENTRE   (Netherlands)

^b UNIVERSITÉ DE LYON   (France)

Author keywords

Micropitting; Mild Wear; Surface Distress; Surface Initiated Fatigue

Indexed keywords

EID: 84955177254     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402004.2011.587633     Document Type: Article

References (41)

1. ISO Standard 15243. (2004), Rolling Bearings—Damage and Failures—Terms, Characteristics and Causes.
2. Way, S. (1935), “Pitting Due to Rolling Contact,” Journal of Applied Mechanics, 57, pp A49-A58.
3. Dawson, P. H. (1962), “Effect of Metallic Contact on the Pitting of Lubricated Rolling Surfaces,” Journal of Mechanical Engineering Science, 4(1), pp 16-21.
4. Dawson, P. H. (1964), “The Effect of Metallic Contact and Sliding on the Shape of the S-N Curve for Pitting Fatigue,” Institution ofMechanical Engineers, Fatigue in Rolling Contact, paper4, pp 41-45.
5. Dawson, P. H. (1965-1966), “Further Experiments on the Effect of Metallic Contact on the Pitting of Lubricated Rolling Surfaces,” Proceedings of the Institution ofMechanical Engineers, 180(Pt 3B), pp 95-112.
6. Olver, A.V. (2005), “The Mechanism of Rolling Contact Fatigue—An Update,” Proceedings ofthe Institution ofMechanical Engineers - Part J: Journal ofEngineering Tribology, 219, pp 313-330.
7. Oila, A., and Bull, S. J. (2005), “Assessment of the Factors Influencing Micropitting in Rolling/Sliding Contacts,” Wear, 258, pp 1510-1524.
8. Brandao, J. A., Seabra, J. H. O., and Castro, J. (2010), “Surface Initiated Tooth Flank Damage Part I: Numerical Model,” Wear, 268, pp 1-12.
9. Brandao, J. A., Seabra, J. H. O., and Castro, J. (2010), “Surface Initiated Tooth Flank Damage Part II: Prediction of Micropitting Initiation and Mass Loss,” Wear, 268, pp 13-22.
10. Laine, E., and Olver, A. V. (2007), “The Effect of Anti-Wear Additives on Fatigue Damage,” 62nd STLE Annual Meeting, May 6-10, Philadelphia, PA, Extended abstract.
11. Laine, E., Olver, A. V., and Beveridge, T. A. (2008), “Effect ofLubricants on Micropitting and Wear,” Tribology International, 41, pp 1049-1055.
12. Laine, E., Olver, A. V., Lekstrom, M. F., Shollock, A., Beveridge, T. A., and Hua, D. Y. (2009), “The Effect of a Friction Modifier Additive on Micropitting,” Tribology Transactions, 52, pp 526-533.
13. Dang Van, K., Griveau, B., and Message, O. (1989), “On a New Multiaxial Fatigue Limit Criterion: Theory and Application,” Biaxial and Multiaxial Fatigue, Brown, M. and Miller, K. (Eds.), Mechanical Engineering Publications: London, pp 479-498.
14. Dang Van, K. (1993), “Macro-Micro Approach in High-Cycle Multiaxial Fatigue,” Advances in Multiaxial Fatigue, ASTM STP 1191, McDowell, D. L. and Ellis, R. (Eds.), Philadelphia, pp 120-130.
15. Venner, C. H., Couhier, F., Lubrecht, A. A., and Greenwood, J. A. (1997), “Amplitude Reduction of Waviness in Transient EHL Line Contacts,” Proceedings of the 1996 Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series 32, Dowson, D. (Eds.), pp 103-112.
16. Morales-Espejel, G. E., Lugt, P. M., van Kuilenburg, J., and Tripp, J. H. (2003), “Effects of Surface Micro-Geometry on the Pressures and Internal Stresses of Pure Rolling EHL Contacts,” Tribology Transactions, 46, pp 260-272.
17. Archard, J. F. (1953), “Contact and Rubbing of Flat Surface,” Journal of Applied Physics, 24(8), pp 981-988.
18. Wohler, A. (1870), “liber die Festigkeitsversuche mit Eisen und Stahl,” (On the Strength of Iron and Steel) Zeitschrift fur Bauwesen, 20, pp 73-106.
19. Shimizu, S., Tsuchiya, K., and Tosha, K. (2009), “Probabilistic Stress-Life (P-S-N) Study on Bearing Steel Using Alternating Torsion Life Test,” Tribology Transactions, 52, pp 807-816.
20. Palmgren, A. G. (1924), “Die Lebensdaur von Kugellagern [Life Length of Roller Bearings],” Zeitschrift des Vereines Deutscher Ingenieure (VDI Zeitschrift), 68(14), pp 339-341. (In German)
21. Morales-Espejel, G. E., Wemekamp, A. W., and Felix-Quinonez, A. (2010), “Micro-Geometry Effects on the Sliding Friction Transition in Elastohydrodynamic Lubrication,” Proceedings ofthe Institution of Mechanical Engineers - Part J: Journal ofEngineering Tribology, 224, pp 621-637.
22. Stanley, H. M., and Kato, T. (1997), “A FFT-Based Method for Rough Surface Contact,” Journal of Tribology, 119, pp 481-485.
23. Johnson, K. L., Greenwood, J. A., and Poon, S. Y. (1972), “A Simple Theory of Asperity Contact in Elastohydrodynamic Lubrication,” Wear, 19, pp 91-108.
24. Kalker, J. J. (1977), “Variational Principles in Contact Elastostatics,” Journal of the Institution of Mathematics and Its Applications, 20, pp 199-219.
25. Tian, X., and Bushman, B. (1996), “A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle,” Journal of Tribology, 118, pp 33-42.
26. Johnson, K. L., Greenwood, J. A., and Higginson, J. G. (1985), “The Contact of Elastic Regular Wavy Surfaces,” International Journal ofMechani-cal Sciences, 27(6), pp 386-396.
27. Hooke, C. J. (2006), “Roughness in Rolling-Sliding Elastohydrody-namic Lubricated Contacts,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 220, pp 259-271.
28. Hooke, C. J., Li, K. Y., and Morales-Espejel, G. E. (2007), “Rapid Calculation of the Pressures and Clearances in Rough, Rolling-Sliding Elastohy-drodynamically Lubricated Contacts. Part 1: Low-Amplitude, Sinusoidal Roughness,” Proceedings ofthe Institution ofMechanical Engineers - Part C: Journal ofMechanical Engineering Science, 221, pp 535-550.
29. Greenwood, J. A., and Morales-Espejel, G. E. (1994),:The Behaviour of Transverse Roughness in EHL Contacts,” Proceedings ofthe Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 208, pp 121-132.
30. Ehret, P., Dowson, D., and Taylor, C. M. (1998), “On Lubricant Transport Conditions in Elastohydrodynamic Conjunctions,” Proceedings ofthe Royal Society of London Series A, 454, pp 763-787.
31. Venner, C. H., and Lubrecht, A. A. (2000), ultigridTechniques: A Fast and Efficient Method for the Numerical Simulation of Elastohydrodynamically Lubricated Point Contact Problems,” Proceedings ofthe Institution ofMe-chanical Engineers - Part J: Journal of Engineering Tribology, 214, pp 4362.
32. Dang Van, K., and Maitournam, M. H. (2003), “Rolling Contact in Railways: Modelling, Simulation and Damage Prediction,” Fatigue and Fracture of Engineering Materials and Structures, 26, pp 939-948.
33. Desimone, H., Bernasconi, A., and Beretta, S. (2006), “On the Application of Dang Van Criterion to Rolling Contact Fatigue,” Wear, 260, pp 567-572.
34. Bernasconi, A., Filippini, M., Foletti, S., and Vaudo, D. (2006), “Multiaxial Fatigue of a Railway Wheel Steel under Non-Proportional Loading,” International Journal ofFatigue, 28, pp 663-672.
35. Fouvry, S., Kapsa, P., and Vincent, L. (2000), “Fretting-Wear and Fretting-Fatigue: Relation Through a Mapping Concept,” Fretting-Fatigue: Current Technology and Practices, ASTM STP 1367, Hoeppner, D. H. Chan-drasekaran, V., and Elliot, C. B. (Eds.), American Society for Testing and Materials: West Conshohocken, PA, pp 49-64.
36. Baietto, M. C., Pierres, E., and Gravouil, A. (2010), “A Multi-Model X-FEM Strategy Dedicated to Frictional Crack Growth under Cyclic Fretting Fatigue Loadings,” International Journal of Solids and Structures, 47, pp 1405-1423.
37. Williams, J. A. (1999), “Wear Modelling: Analytical, Computational and Mapping: A Continuum Mechanics Approach,” Wear, 225-227, pp 1-17.
38. Kim, T. H., and Olver, A. V. (1998), “Stress History in Rolling-Sliding Contact of Rough Surfaces,” Tribology International, 12, pp 727-736.
39. Webster, M., and Norbart, C. (1995), “An Experimental Investigation on Micro-Pitting Using a Roll Disk Machine,” Tribology Transactions, 38, pp 883-893.
40. Ueda, T., Ueda, K., and Mitamura, N. (2005), “Unique Fatigue Failure of Spherical Roller Bearings and Life-Enhancing Measures,” Proceedings of the World Tribology Congress, Washington, DC, September 12-16, 2005.
41. Kotzalas, M. N., and Doll, G. (2010), “Tribological Advancements for Reliabale Wind Turbine Performance,” Philosophical Transactions ofthe Royal Society A, 368, pp 4829-4850.