Bone quality evaluation at dental implant site using multislice CT, micro-CT, and cone beam CT

Clinical Oral Implants Research

Volumn 26, Issue 1, 2015, Pages e1-e7

  Parsa, Azin ^a   Ibrahim, Norliza ^a,b   Hassan, Bassam ^a   van der Stelt, Paul ^a   Wismeijer, Daniel ^a  

^a UNIVERSITY OF AMSTERDAM   (Netherlands)

^b UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

Bone density; Bone volume fraction; Cone beam computed tomography; Dental implants; Micro computed tomography; Multislice computed tomography

Indexed keywords

ALGORITHM; BONE DENSITY; CADAVER; COMPARATIVE STUDY; COMPUTER ASSISTED DIAGNOSIS; CONE BEAM COMPUTED TOMOGRAPHY; DIAGNOSTIC IMAGING; EDENTULOUSNESS; HUMAN; MANDIBLE; MICRO-COMPUTED TOMOGRAPHY; MULTIDETECTOR COMPUTED TOMOGRAPHY; PROCEDURES; REPRODUCIBILITY;

ALGORITHMS; BONE DENSITY; CADAVER; CONE-BEAM COMPUTED TOMOGRAPHY; HUMANS; JAW, EDENTULOUS, PARTIALLY; MANDIBLE; MULTIDETECTOR COMPUTED TOMOGRAPHY; RADIOGRAPHIC IMAGE INTERPRETATION, COMPUTER-ASSISTED; REPRODUCIBILITY OF RESULTS; X-RAY MICROTOMOGRAPHY;

EID: 84917698008     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/clr.12315     Document Type: Article

References (60)

1. Aksoy, U., Eratalay, K. & Tözüm, T.F. (2009) The possible association among bone density values, resonance frequency measurements, tactile sense, and histomorphometric evaluations of dental implant osteotomy sites: a preliminary study. Implant Dentistry 18: 316-325.
2. Araki, K. & Okano, T. (2011) The effect of surrounding conditions on pixel value of cone beam computed tomography. Clinical Oral Implants Research 17: 862-865. doi:10.1111/j.1600-0501.2011.02373.x
3. Aranyarachkul, P., Caruso, J., Gantes, B., Schulz, E., Riggs, M., Dus, I., Yamada, J.M. & Crigger, M. (2005) Bone density assessments of dental implant sites: 2. Quantitative cone-beam computerized tomography. The International Journal of Oral & Maxillofacial Implants 20: 416-424.
4. Burghardt, A.J., Link, T.M. & Majumdar, S. (2011) High-resolution computed tomography for clinical imaging of bone microarchitecture. Clinical Orthopaedics and Related Research 469: 2179-2193.
5. Carrafiello, G., Dizonno, M., Colli, V., Strocchi, S., Pozzi-Taubert, S., Leonardi, A., Giorgianni, A., Barresi, M., Macchi, A., Bracchi, E., Conte, L. & Fugazzola, C. (2010) Comparative study of jaws with multislice computed tomography and cone-beam computed tomography. La Radiologia medica 115: 600-611.
6. Cassetta, M., Stefanelli, L.V., Pacifici, A., Pacifici, L. & Barbato, E. (2013) How accurate is CBCT in measuring bone density? A comparative CBCT-CT in vitro study. Clinical Implant Dentistry and Related Research. doi: 10.1111/cid.12027.
7. Corpas, L.S., Jacobs, R., Quirynen, M., Huang, Y., Naert, I. & Duyck, J. (2011) Peri-implant bone tissue assessment by comparing the outcome of intra-oral radiograph and cone beam computed tomography analyses to the histological standard. Clinical Oral Implants Research 22: 492-499.
8. Davies, J., Johnson, B. & Drage, N. (2012) Effective doses from cone beam CT investigation of the jaws. Dentomaxillofacial Radiology 41: 30-36.
9. De Vos, W., Casselman, J. & Swennen, G.R. (2009) Cone-beam computerized tomography (CBCT) imaging of the oral and maxillofacial region: a systematic review of the literature. International Journal of Oral and Maxillofacial Surgery 38: 609-625.
10. Diederichs, G., Link, T.M., Kentenich, M., Schwieger, K., Huber, M.B., Burghardt, A.J., Majumdar, S., Rogalla, P. & Issever, A.S. (2009) Assessment of trabecular bone structure of the calcaneus using multi-detector CT: correlation with microCT and biomechanical testing. Bone 44: 976-983.
11. Dula, K., Mini, R., van der Stelt, P.F., Lambrecht, J.T., Schneeberger, P. & Buser, D. (1996) Hypothetical mortality risk associated with spiral computed tomography of the maxilla and mandible. European Journal of Oral Sciences 104: 503-510.
12. Ekestubbe, A., Thilander, A. & Gröndahl, H.G. (1992) Absorbed doses and energy imparted from tomography for dental implant installation. Spiral tomography using the Scanora technique compared with hypocycloidal tomography. Dentomaxillofacial Radiology 21: 65-69.
13. Ekestubbe, A., Thilander, A., Gröndahl, K. & Gröndahl, H.G. (1993) Absorbed doses from computed tomography for dental implant surgery: comparison with conventional tomography. Dentomaxillofacial Radiology 22: 13-17.
14. Frederiksen, N.L., Benson, B.W. & Sokolowski, T.W. (1995) Effective dose and risk assessment from computed tomography of the maxillofacial complex. Dentomaxillofacial Radiology 24: 55-58.
15. Fuh, L.J., Huang, H.L., Chen, C.S., Fu, K.L., Shen, Y.W., Tu, M.G., Shen, W.C. & Hsu, J.T. (2010) Variations in bone density at dental implant sites in different regions of the jawbone. Journal of Oral Rehabilitation 37: 346-351.
16. Fyhrie, D.P. (2005) Summary-Measuring "bone quality". Journal of Musculoskeletal & Neuronal Interactions 5: 318-320.
17. González-García, R. & Monje, F. (2012) The reliability of cone-beam computed tomography to assess bone density at dental implant recipient sites: a histomorphometric analysis by micro-CT. Clinical Oral Implants Research 24: 871-879. doi: 10.1111/j.1600-0501.2011.02390.x.
18. Haramati, N., Staron, R.B., Mazel-Sperling, K., Freeman, K., Nickoloff, E.L., Barax, C. & Feldman, F. (1994) CT scans through metal scanning technique versus hardware composition. Computerized Medical Imaging and Graphics 18: 429-434.
19. Hassan, B., Couto Souza, P., Jacobs, R., de Azambuja Berti, S. & van der Stelt, P. (2010) Influence of scanning and reconstruction parameters on quality of three-dimensional surfaces models of the dental arches from cone beam computed tomography. Clinical Oral Investigations 14: 303-310.
20. Hua, Y., Nackaerts, O., Duyck, J., Maes, F. & Jacobs, R. (2009) Bone quality assessment based on cone beam computed tomography imaging. Clinical Oral Implants Research 20: 767-771.
21. Ibrahim, N., Parsa, A., Hassan, B., van der Stelt, P., Aartman, L.H. & Wismeijer, D. (2013b) Accuracy of trabecular bone microstructural measurement at planned dental implant sites using cone-beam CT datasets. Clinical Oral Implants Research. doi: 10.1111/clr.12163.
22. Ibrahim, N., Parsa, A., Hassan, B., van der Stelt, P. & Wismeijer, D. (2013a) Diagnostic imaging of trabecular bone microstructure for oral implants: a literature review. Dentomaxillofacial Radiology 42: 20120075.
23. Jaffin, R.A. & Berman, C.L. (1991) The excessive loss of Branemark fixtures in type IV bone: a 5-year analysis. Journal of Periodontology 62: 2-4.
24. Jemt, T., Book, K., Lindén, B. & Urde, G. (1992) Failures and complications in 92 consecutively inserted overdentures supported by Brånemark implants in severely resorbed edentulous maxillae: a study from prosthetic treatment to first annual check-up. The International Journal of Oral & Maxillofacial Implants 7: 162-167.
25. Kamburoglu, K., Murat, S., Kolsuz, E., Kurt, H., Yuksel, S. & Paksoy, C. (2011) Comparative assessment of subjective image quality of cross-sectional cone-beam computed tomography scans. Journal of Oral Science 53: 501-508.
26. Katsumata, A., Hirukawa, A., Okumura, S., Naitoh, M., Fujishita, M., Ariji, E. & Langlais, R.P. (2009) Relationship between density variability and imaging volume size in cone-beam computerized tomographic scanning of the maxillofacial region: an in vitro study. Oral Surgery Oral Medicine Oral Pathology Oral Radiology Endodontics 107: 420-425.
27. Kau, C.H., Richmond, S., Palomo, J.M. & Hans, M.G. (2005) Three-dimensional cone beam computerized tomography in orthodontics. Journal of Orthodontics 32: 282-293.
28. Lagravère, M.O., Carey, J., Toogood, R.W. & Major, P.W. (2008) Three-dimensional accuracy of measurements made with software on cone-beam computed tomography images. American Journal of Orthodontics and Dentofacial Orthopedics 134: 112-116.
29. Lagravère, M.O., Fang, Y., Carey, J., Toogood, R.W., Packota, G.V. & Major, P.W. (2006) Density conversion factor determined using a cone-beam computed tomography unit NewTom QR-DVT 9000. Dentomaxillofacial Radiology 35: 407-409.
30. Lioubavina-Hack, N., Lang, N.P. & Karring, T. (2006) Significance of primary stability for osseointegration of dental implants. Clinical Oral Implants Research 17: 244-250.
31. Liu, S., Zhang, Z.Y., Li, J.P., Liu, D.G. & Ma, X. (2007) A study of trabecular bone structure in the mandibular condyle of healthy young people by cone beam computed tomography. Chinese Journal of Stomatology 42: 357-360.
32. Lou, L., Lagravere, M.O., Compton, S., Major, P.W. & Flores-Mir, C. (2007) Accuracy of measurements and reliability of landmark identification with computed tomography (CT) techniques in the maxillofacial area: a systematic review. Oral Surgery Oral Medicine Oral Pathology Oral Radiology Endodontics 104: 402-411.
33. Martin-Badosa, E., Amblard, D., Nuzzo, S., Elmoutaouakkil, A., Vico, L. & Peyrin, F. (2003) Excised bone structures in mice: imaging at three-dimensional synchrotron radiation micro CT. Radiology 229: 921-928.
34. Muller, R. (2003) Bone microarchitecture assessment: current and future trends. Osteoporosis International 14: S89-S95.
35. Nackaerts, O., Maes, F., Yan, H., Couto Souza, P., Pauwels, R. & Jacobs, R. (2011) Analysis of intensity variability in multislice and cone beam computed tomography. Clinical Oral Implants Research 22: 873-879.
36. Naitoh, M., Aimiya, H., Hirukawa, A. & Ariji, E. (2010a) a) Morphometric analysis of mandibular trabecular bone using cone beam computed tomography: an in vitro study. The International Journal of Oral & Maxillofacial Implants 25: 1093-1098.
37. Naitoh, M., Hirukawa, A., Katsumata, A. & Ariji, E. (2009) Evaluation of voxel values in mandibular cancellous bone: relationship between cone-beam computed tomography and multislice helical computed tomography. Clinical Oral Implants Research 20: 503-506.
38. Naitoh, M., Hirukawa, A., Katsumata, A. & Ariji, E. (2010b) Prospective study to estimate mandibular cancellous bone density using large-volume cone-beam computed tomography. Clinical Oral Implants Research 21: 1309-1313.
39. Naitoh, M., Katsumata, A., Mitsuya, S., Kamemoto, H. & Ariji, E. (2004) Measurement of mandibles with microfocus x-ray computerized tomography and compact computerized tomography for dental use. The International Journal of Oral & Maxillofacial Implants 19: 239-246.
40. Nkenke, E., Hahn, M., Lell, M., Wiltfang, J., Schultze-Mosgau, S., Stech, B., Radespiel-Troger, M. & Neukam, F.W. (2003) Anatomic site evaluation of the zygomatic bone for dental implant placement. Clinical Oral Implants Research 14: 72-79.
41. Nomura, Y., Watanabe, H., Honda, E. & Kurabayashi, T. (2010) Reliability of voxel values from cone-beam computed tomography for dental use in evaluating bone mineral density. Clinical Oral Implants Research 21: 558-562.
42. Odgaard, A. (1997) Three-dimensional methods for quantification of cancellous bone architecture. Bone 20: 315-328.
43. Ozan, O., Turkyilmaz, I. & Yilmaz, B. (2007) A preliminary report of patients treated with early loaded implants using computerized tomography-guided surgical stents: flapless versus conventional flapped surgery. Journal of Oral Rehabilitation 34: 835-840.
44. Parfitt, A.M., Drezner, M.K., Glorieux, F.H., Kanis, J.A., Malluche, H., Meunier, P.J., Ott, S.M. & Recker, R.R. (1987) Bone histomorphometry: standardization of nomenclature, symbols, and units. Report of the ASBMR Histomorphometry nomenclature committee. Journal of Bone and Mineral Research 2: 595-610.
45. Parsa, A., Ibrahim, N., Hassan, B., Motroni, A., van der Stelt, P. & Wismeijer, D. (2012) Reliability of voxel gray values in cone beam computed tomography for pre-operative implant planning assessment. The International Journal of Oral & Maxillofacial Implants 27: 1438-1442.
46. Parsa, A., Ibrahim, N., Hassan, B., Motroni, A., van der Stelt, P. & Wismeijer, D. (2013) Influence of cone beam CT scanning parameters on gray value measurements at implant site. Dentomaxillofacial Radiology 42: 79884780.
47. Reeves, T., Mah, P. & McDavid, W.D. (2012) Deriving Hounsfield units using grey levels in cone beam CT: a clinical application. Dentomaxillofacial Radiology 41: 500-508.
48. Schulze, R.K., Berndt, D. & d'Hoedt, B. (2010) On cone-beam computed tomography artifacts induced by titanium implants. Clinical Oral Implants Research 21: 100-107.
49. Schulze, R., Heli, U., Gross, D., Bruellmann, D.D., Dranicshnikow, E., Schwanecke, U. & Schoemer, E. (2011) Artifacts in CBCT: a review. Dentomaxillofacial Radiology 40: 265-273.
50. Schwarz, M.S., Rothman, S.L., Rhodes, M.L. & Chafetz, N. (1987) Computed tomography: part II. Preoperative assessment of the maxilla for endosseous implant surgery. The International Journal of Oral & Maxillofacial Implants 2: 143-148.
51. Shahlaie, M., Gantes, B., Schulz, E., Riggs, M. & Crigger, M. (2003) Bone density assessments of dental implant sites: 1. Quantitative computed tomography. The International Journal of Oral & Maxillofacial Implants 18: 224-231.
52. Shapurian, T., Damoulis, P.D., Reiser, G.M., Griffin, T.J. & Rand, W.M. (2006) Quantitative evaluation of bone density using the Hounsfield index. The International Journal of Oral & Maxillofacial Implants 21: 290-297.
53. Spin-Neto, R., Gotfredsen, E. & Wenzel, A. (2013) Impact of voxel size variation on cbct-based diagnostic outcome in dentistry: a systemic review. Journal of Digital Imaging 26: 813-820.
54. Stoppie, N., Pattijn, V., Van Cleynenbreugel, T., Wevers, M., Vander Sloten, J. & Ignace, N. (2006) Structural and radiological parameters for the characterization of jawbone. Clinical Oral Implants Research 17: 124-133.
55. Teo, J.C., Si-Hoe, K.M., Keh, J.E. & Teoh, S.H. (2006) Relationship between CT intensity, micro-architecture and mechanical properties of porcine vertebral cancellous bone. Clinical Biomechanics 21: 235-244.
56. Teo, J.C.M., Si-Hoe, K.M., Keh, J.E.L. & Teoh, S.H. (2007) Correlation of cancellous bone microarchitectural parameters from microCT to CT number and bone mechanical properties. Materials Science and Engineering 27: 333-339.
57. Tolstunov, L. (2007) Implant zones of the jaws: implant location and related success rate. The Journal of Oral Implantology 33: 211-220.
58. White, S.C. (2008) Cone-beam imaging in dentistry. Health Physics 95: 628-637.
59. Yeni, Y.N., Christopherson, G.T., Dong, X.N., Kim, D.G. & Fyhrie, D.P. (2005) Effect of microcomputed tomography voxel size on the finite element model accuracy for human cancellous bone. Journal of Biomechanical Engineering 127: 1-8.
60. Yoo, S. & Yin, F.F. (2006) Dosimetric feasibility of cone-beam CT-based treatment planning compared to CT-based treatment planning. International Journal of Radiation Oncology, Biology, Physics 66: 1553-1561.